| Code | What the drive shows | Families |
|---|
| A35012 | TM54F: Test stop for failsafe digital inputs/outputs | G130, G150, S120, S150 |
| A35014 | TM54F: Test stop for fail-safe digital inputs/outputs | G130, G150, S120, S150 |
| A35015 | TM54F: Motor/Hydraulic Module replaced or configuration inconsistent | G130, G150, S120, S150 |
| A35016 | TM54F: Net data communication with drive not established | G130, G150, S120, S150 |
| A35054 | TM54F: Temperature alarm threshold exceeded | G130, G150, S120, S150 |
| A35075 | TM54F: Error during internal communication | G130, G150, S120, S150 |
| A35080 | TM54F: Checksum error safety parameters | G130, G150, S120, S150 |
| A35081 | TM54F: Static (steady state) 1 signal at the F-DI for safe acknowledgment | G130, G150, S120, S150 |
| A35200 | TM: Calibration data | G130, G150, S120, S150 |
| A35211 | TM: Temperature alarm threshold channel 0 exceeded | G130, G150, S120, S150 |
| A35212 | TM: Temperature alarm threshold channel 1 exceeded | G130, G150, S120, S150 |
| A35213 | TM: Temperature alarm threshold channel 2 exceeded | G130, G150, S120, S150 |
| A35214 | TM: Temperature alarm threshold channel 3 exceeded | G130, G150, S120, S150 |
| A35222 | TM: Encoder pulse number not permissible | G130, G150, S120, S150 |
| A35223 | TM: Zero mark offset not permissible | G130, G150, S120, S150 |
| A35224 | TM: Zero mark synchronization interrupted | S120, S150 |
| A35225 | TM: Zero mark synchronization held - encoder not in the ready state | S120, S150 |
| A35226 | TM: Tracks A/B are deactivated | S120, S150 |
| A35227 | EDS changeover/encoder data set change not supported | S120, S150 |
| A35228 | TM: Sampling time p4099[3] invalid | S120, S150 |
| A35231 | TM: Master control by PLC missing | S120, S150 |
| A35232 | TM41: Zero mark no longer synchronous POWER ON required | S120, S150 |
| A35410 | TM: Temperature alarm threshold channel 4 exceeded | G130, G150, S120, S150 |
| A35411 | TM: Temperature alarm threshold channel 5 exceeded | G130, G150, S120, S150 |
| A35412 | TM: Temperature alarm threshold channel 6 exceeded | G130, G150, S120, S150 |
| A35413 | TM: Temperature alarm threshold channel 7 exceeded | G130, G150, S120, S150 |
| A35414 | TM: Temperature alarm threshold channel 8 exceeded | G130, G150, S120, S150 |
| A35415 | TM: Temperature alarm threshold channel 9 exceeded | G130, G150, S120, S150 |
| A35416 | TM: Temperature alarm threshold channel 10 exceeded | G130, G150, S120, S150 |
| A35417 | TM: Temperature alarm threshold channel 11 exceeded | G130, G150, S120, S150 |
| A35802 | TM: Time slice overflow | G130, G150, S120, S150 |
| A35803 | TM: Memory test | S120, S150 |
| A35807 | TM: Sequence control time monitoring | S120, S150 |
| A35904 | TM: EEPROM | G130, G150, S120, S150 |
| A35905 | TM: Parameter access | G130, G150, S120, S150 |
| A35906 | TM: 24 V power supply missing | G130, G150, S120, S150 |
| A35907 | TM: Hardware initialization error | G130, G150, S120, S150 |
| A35910 | TM: Module overtemperature | G130, G150, S120, S150 |
| A35911 | TM: Clock synchronous operation sign-of-life missing | G130, G150, S120, S150 |
| A35920 | TM: Error temperature sensor channel 0 | G130, G150, S120, S150 |
| A35921 | TM: Error temperature sensor channel 1 | G130, G150, S120, S150 |
| A35922 | TM: Error temperature sensor channel 2 | G130, G150, S120, S150 |
| A35923 | TM: Error temperature sensor channel 3 | G130, G150, S120, S150 |
| A35924 | TM: Error temperature sensor channel 4 | G130, G150, S120, S150 |
| A35925 | TM: Error temperature sensor channel 5 | G130, G150, S120, S150 |
| A35926 | TM: Error temperature sensor channel 6 | G130, G150, S120, S150 |
| A35927 | TM: Error temperature sensor channel 7 | G130, G150, S120, S150 |
| A35928 | TM: Error temperature sensor channel 8 | G130, G150, S120, S150 |
| A35929 | TM: Error temperature sensor channel 9 | G130, G150, S120, S150 |
| A35930 | TM: Error temperature sensor channel 10 | G130, G150, S120, S150 |
| A35931 | TM: Error temperature sensor channel 11 | G130, G150, S120, S150 |
| A35999 | TM: Unknown alarm | G130, G150, S120, S150 |
