| Code | What the drive shows | Families |
|---|
| F06000 | Infeed: Precharging monitoring time expired | G130, G150, S120, S150 |
| F06010 | Infeed: Power unit EP 24 V missing in operation | G130, G150, S120, S150 |
| F06050 | Infeed: Smart Mode not supported | S120, S150 |
| F06052 | Infeed: Filter temperature evaluation not supported | S120, S150 |
| F06080 | Infeed: parameter error | S120, S150 |
| F06100 | Infeed: Shutdown due to line supply undervoltage condition | G130, G150, S120, S150 |
| F06200 | Infeed: One or several line phases failed | S120, S150 |
| F06207 | Infeed: Line currents asymmetrical | S120, S150 |
| F06210 | Infeed: Summation current too high | S120, S150 |
| F06211 | Infeed: Summation current impermissibly high | G130, G150, S120, S150 |
| F06255 | Infeed: temperature threshold value not permissible | S120, S150 |
| F06261 | Infeed: Temperature in the line filter permanently too high | S120, S150 |
| F06262 | Infeed: Temperature switch in the line filter open when switching on | S120, S150 |
| F06300 | Infeed: Line voltage too high at power on | S120, S150 |
| F06310 | Infeed: Supply voltage (p0210) incorrectly parameterized | G115D, G120, G120C, G120XA, G130, G150, S120, S150 |
| F06311 | Infeed: Supply voltage (p0210) incorrect | G130, G150, S120, S150 |
| F06320 | Master/slave: 4-channel multiplexer control not valid | S120, S150 |
| F06321 | Master/slave: 6-channel multiplexer control not valid | S120, S150 |
| F06500 | Infeed: Line synchronization not possible | S120, S150 |
| F06503 | Infeed: Line black start unsuccessful | S120, S150 |
| F06504 | Infeed: Island line supply synchronization unsuccessful | S120, S150 |
| F06505 | Infeed: For transformer magnetization current limit exceeded | S120, S150 |
| F06700 | Infeed: Switch line contactor for load condition | G130, G150, S120, S150 |
| F06850 | Infeed: Short-circuit prevailing for too long | S120, S150 |
| F06851 | Infeed: Distributed infeed line monitoring tripped | S120, S150 |
| F06855 | Infeed: Line filter monitor responded | S120, S150 |
| F06906 | Braking Module internal fault | G130, G150, S120, S150 |
| F06907 | Braking Module internal overtemperature | G130, G150, S120, S150 |
| F06908 | Braking Module internal overtemperature shutdown | G130, G150, S120, S150 |
| F06909 | Braking Module internal Vce fault | G130, G150, S120, S150 |
| F06922 | Braking resistor phase failure | G120, G130, G150, S120, S150 |
