| Code | What the drive shows | Families |
|---|
| A08504 | PN/COMM BOARD: Internal cyclic data transfer error | G130, G150, S120, S150 |
| A08511 | PN/COMM BOARD: Receive configuration data invalid | G115D, G120, G120C, G120XA, G130, G150, S120, S150 |
| A08520 | PN/COMM BOARD: Non-cyclic channel error | G130, G150, S120, S150 |
| A08526 | PN/COMM BOARD: No cyclic connection | G115D, G120, G120C, G120XA, G130, G150, S120, S150 |
| A08530 | PN/COMM BOARD: Message channel error | G130, G150, S120, S150 |
| A08531 | CBE20 POWER ON required | G130, G150, S120, S150 |
| A08550 | PZD Interface Hardware assignment error | G130, G150, S120, S150 |
| A08555 | Modbus TCP: commissioning error | G130, G150, S120, S150 |
| A08560 | IE: Syntax error in configuration file | G130, G150, S120, S150 |
| A08561 | IE: Consistency error affecting adjustable parameters | G130, G150, S120, S150 |
| A08562 | PROFINET: Syntax error in configuration file | G130, G150, S120, S150 |
| A08563 | PROFINET: Consistency error affecting adjustable parameters | G130, G150, S120, S150 |
| A08564 | PN/COMM BOARD: syntax error in the configuration file | G120, G120XA, G130, G150, S120, S150 |
| A08565 | PNCOMM BOARD: Consistency error affecting adjustable parameters | G115D, G120, G120C, G120XA, G130, G150, S120, S150 |
| A08751 | CAN: Telegram loss | G120, G130, G150, S120, S150 |
| A08753 | CAN: Message buffer overflow | G120, G130, G150, S120, S150 |
| A08754 | CAN: Incorrect communications mode | G120, G130, G150, S120, S150 |
| A08755 | CAN: Object cannot be mapped | G120, G130, G150, S120, S150 |
| A08756 | CAN: Number of mapped bytes exceeded | G120, G130, G150, S120, S150 |
| A08757 | CAN: Set COB-ID invalid | G120, G130, G150, S120, S150 |
| A08758 | CAN: Maximum number of valid PDO exceeded | G130, G150, S120, S150 |
| A08759 | CAN: PDO COB-ID already available | G120, G130, G150, S120, S150 |
| A08760 | CAN: maximum size of the IF PZD exceeded | G120, G130, G150, S120, S150 |
| A08800 | PROFIenergy energy-saving mode active | G120, G130, G150, S120, S150 |
