What it means
The drive raises A01319 when at least one component that has been inserted into the drive still needs to be initialized. The drive can initialize an inserted component only while pulses are inhibited on every drive object, so the alarm points to a component that is still waiting for this initialization step.
Why it appears
- At least one inserted component requires initialization.
- Initialization of an inserted component is only possible while pulses are inhibited on all drive objects, so the message appears while a component is still waiting to be initialized.
What to check
- Activate pulse inhibit for all drive objects, so that the drive can initialize the inserted component.
Acknowledging and restarting
The drive does not require a separate acknowledgement for this message. Once pulse inhibit is active for all drive objects, the inserted component is initialized and the alarm is resolved by itself.
The same on every family
Every manual that describes A01319 gives it the same reaction, acknowledgement and message class.
| Drive family | Reaction | Acknowledge | Message class | Component | Manual |
|---|---|---|---|---|---|
| S120, S150 | NONE | NONE | Error in the parameterization / configuration / commissioning procedure (18) | None | SINAMICS S120, S150 List Manual · p. 2590 |
| G130, G150 | NONE | NONE | Error in the parameterization / configuration / commissioning procedure (18) | None | SINAMICS G130, G150 List Manual · p. 1400 |
The drives this code lives on
A01319 is described for G130, G150, S120, S150. These are the converters of those families in our catalogue — price on request.
Questions technicians ask
What does alarm A01319 mean on a SINAMICS drive?
An inserted component is not yet initialized. The drive can initialize an inserted component only while pulses are inhibited on all drive objects.
How do I clear A01319?
Activate pulse inhibit for all drive objects. After that the component can be initialized, and no separate acknowledgement is needed.
Why does A01319 appear after inserting a component?
Because the newly inserted component still has to be initialized, and the drive performs this initialization only while pulses are inhibited on every drive object.
Codes next to this one
Source
Written from Siemens' own List Manuals and operating instructions; every number, designation and parameter on this page is checked against them before publication.
All SINAMICS codes: fault and alarm codes · the A01xxx group · SINAMICS manuals · Siemens manuals