TC10-0

Под заказ

WIKA · Измерение температуры · Семейство TC10

Термопара

Name: Термопара
Brand: WIKA

Промышленный термопарный комплект с подпружиненным измерительным вкладышем, пригодный для применения в стандартных гильзах термометров или с фиксированным присоединением.

Диапазон

-40…1260 °C

Выход

HART · 4-20 mA

Защита

IP65

CERoHSEACINMETROCCCGOSTKazInMetrMTSCHSBelGIMUkrSEPROUzstandardATEXIECExFMCSAEx UkraineEMCEx i (gas) Zone 0, 1, 2Ex i (dust) Zone 20, 21, 22Ex d (gas) Zone 1, 2Ex d (dust) Zone 21Ex e (gas) Zone 1, 2Ex n (gas) Zone 2Ex t (dust) Zone 21, 22Ex d IIC Gb T6/T5/T4Ex d IIB + H2 Gb T6/T5/T4Ex nA (gas) Zone 2

Цена

По запросу

Зависит от конфигурации

Заказать расчёт

+38 (067) 285-77-70·info@avigan.com.uaViberTelegram

Описание

Термопары этой серии можно комбинировать с большим количеством конструкций термокарманов. Эксплуатация без термокарманов допускается при использовании неподвижного (приварного) присоединительного штуцера.

Для термометров доступно большое разнообразие возможных комбинаций датчика, соединительной головки, длины погружения, длины шейки, присоединения к термокарману и т. д.; они подходят практически для любых размеров термокарманов.

для получения дополнительных одобрений см. стр. 2

Термопара, модель TC10-0, промышленная сборка

Особенности

Диапазоны измерений чувствительного элемента от -40 ... +1,260 °C [-40 ... +2,300 °F]
Для монтажа во все стандартные конструкции защитных гильз
Пружинный измерительный вкладыш (сменный)
Взрывозащищённые исполнения
Стационарно закреплённый (сварной) измерительный вкладыш

Вопросы и ответы

Какой диапазон температур измеряет термопара TC10-0?

Диапазоны измерения — от -40 °C до +1 260 °C в зависимости от калибровки; доступны также варианты с верхними пределами +350 … +1 200 °C.

Какие типы термопар доступны?

Type K, J, E, N и T с классами допуска Class 1, Class 2, Standard или Special.

Как монтируется сборка?

В стандартные защитные гильзы (с подпружиненным вкладышем) либо с фиксированным приварным присоединением. Присоединительные резьбы: ½ NPT, ¾ NPT, G ½ B, G ¾ B, M14 x 1.5, M18 x 1.5, M20 x 1.5, M24 x 1.5, конические и параллельные резьбы, а также варианты шейки nipple-union-nipple, неразъёмной шейки и двойной шестигранной муфты.

Какое взрывозащищённое исполнение доступно?

Доступны Ex i (газ: зоны 0, 1, 2; пыль: зоны 20, 21, 22), Ex d (газ: зоны 1, 2), Ex e, Ex n/Ex nA (зона 2) и Ex t (пыль). Маркировки включают ATEX II 1G Ex ia IIC T1…T6 Ga, IECEx Ex ia IIC T1…T6 Ga, FM и CSA Class I, Div 1, Groups B, C, D, T6.

Какая степень защиты корпуса?

IP65.

Подходит ли модель для систем безопасности SIL?

Да, сборка соответствует уровню полноты безопасности SIL 2 по IEC 61508 / IEC 61511.

Чем TC10-0 отличается от соседних моделей серии?

TC10-0 — промышленная сборка с подпружиненным заменяемым измерительным вкладышем для стандартных гильз; также доступно исполнение с неподвижным (приварным) присоединением вкладыша без гильзы.

Какой выходной сигнал обеспечивает прибор?

HART и аналоговый сигнал 4 … 20 mA.

Идентификация

Модель	TC10-0
Серия	TC10
Подтип	Thermocouple

Измерительный диапазон

Диапазон температуры

−40…+1260 °C · −40…+1200 °C · −40…+1000 °C · −40…+900 °C · −40…+800 °C · −40…+750 °C · −40…+350 °C · +0…+1260 °C · +0…+870 °C · +0…+760 °C · +0…+370 °C

Точность измерения

Уровень функциональной безопасности (SIL)

SIL 2 (IEC 61508 / IEC 61511)

Технологические условия

Технологическое присоединение	½ NPT¾ NPTG ½ BG ¾ BM14 x 1.5M18 x 1.5M20 x 1.5M24 x 1.5Tapered threadsParallel threadsNipple-union-nipple neck tubeNon-divisible neck tubeDouble threaded hex bushing
Темп. процесса	−40…+1260 °C

Электрические характеристики

Выходной сигнал	HART · 4-20 mA
Электр. соединение	Connection head (BS, BSZ-H, KN4-A, KN4-P, 1/4000, 7/8000)

Материалы

Материал зонда

Sheathed cable (mineral-insulated cable, MI cable), Sheathed cable (mineral-insulated cable)

Условия эксплуатации

Темп. окружающей среды	−40…+80 °C
Степень защиты IP	IP65

Сертификаты и одобрения

Сертификаты

CERoHSEACINMETROCCCGOSTKazInMetrMTSCHSBelGIMUkrSEPROUzstandardATEXIECExFMCSAEx UkraineEMC

Взрывозащита

Ex i (gas) Zone 0, 1, 2Ex i (dust) Zone 20, 21, 22Ex d (gas) Zone 1, 2Ex d (dust) Zone 21Ex e (gas) Zone 1, 2Ex n (gas) Zone 2Ex t (dust) Zone 21, 22Class I, division 1, group B, C, D, T6 type 4/4XClass II or III, division 1, group E, F, G type 4/4XEx d IIC Gb T6/T5/T4Ex d IIB + H2 Gb T6/T5/T4Ex nA (gas) Zone 2ATEX: II 1G Ex ia IIC T1...T6 Ga, II 2G Ex db IIB+H2 T6...T4 Gb, II 2G Ex eb IIC T1...T6 GbIECEx: Ex ia IIC T1...T6 Ga, Ex db IIB+H2 T6...T4 GbFM: Class I, Div 1, Groups B, C, D, T6; Class II/III, Div 1, Groups E, F, GCSA: Class I, Div 1, Groups B, C, D, T6; Class II/III, Div 1, Groups E, F, GEAC: 0Ex ia IIC T6...T1 Ga, 1Ex d IIC T6...T4 GbEx Ukraine: II 1G Ex ia IIC T1...T6 Ga, II 2G Ex db IIC T6...T4 GbINMETRO: II 1G Ex ia IIC T1...T6 GaCCC: Ex ia IIC T1~T6 Ga, Ex d IIC T4~T6 Gb

Дополнительные характеристики

Тип сенсора	Type K/J/E/N/T
Класс сенсора	Class 1, Class 2, Standard, Special
Диаметр зонда	3 mm
Защитная гильза	Да
Языки datasheet	EN, DE

Таблицы из даташита

Approval	Explosion protection
Ex i (gas) Zone 0, 1, 2	Ex i (dust) Zone 20, 21, 22	Ex d (gas) Zone 1, 2	Ex d (dust) Zone 21	Ex e (gas) Zone 1, 2	Ex n (gas) Zone 2
ATEX	x	x	x	x	x	x
IECEx	x	x	x	x	x	x
FM	-	-	x	x	-	-
CSA	-	-	x	x	-	-
EAC	x	x	x	x	-	x
Ex Ukraine	x	x	x	x	-	-
INMETRO	x	x	-	-	-	-
CCC	x	x	x	x	x	x

Measuring element

Type of sensor	Thermocouple per IEC 60584-1 or ASTM E230 Types K, J, E, N,T
Hot junction	■ Ungrounded (standard) ■ Grounded (welded to the sheath)
Marking of the polarity	The colour coding at the positive poles of the instrument decides the correlation of polarity and terminal
Single thermocouple
Dual thermocouple
Validity limits of the class accuracy per EN 60584-1
Type K	Class 2 Class 1	-40 ... +1,200 °C [-40 ... +2,192 °F] -40 ... +1,000 °C [-40 ... +1,832 °F]
Type J	Class 2 Class 1	-40 ...+750 °C [-40 ... +1,382 °F] -40 ...+750 °C [-40 ... +1,382 °F]
Type E	Class 2 Class 1	-40 ...+900 °C [-40 ... +1,652 °F] -40 ...+800 °C [-40 ... +1,472 °F]
Type N	Class 2 Class 1	-40 ... +1,200 °C [-40 ... +2,192 °F] -40 ... +1,000 °C [-40 ... +1,832 °F]
TypeT	Class 2 Class 1	-40 ...+350 °C [-40 ...+662 °F] -40 ...+350 °C [-40 ...+662 °F]
Validity limits of the class accuracy in accordance with ASTM-E230
Type K	Standard Special	0 ... 1,260 °C [32 ... 2,300 °F] 0 ... 1,260 °C [32 ... 2,300 °F]
Type J	Standard Special	0 ... 760 °C [32 ... 1,400 °F] 0 ... 760 °C [32 ... 1,400 °F]
Type E	Standard Special	0 ... 870 °C [32 ... 1,598 °F] 0 ... 870 °C [32 ... 1,598 °F]
Type N	Standard Special	0 ... 1,260 °C [32 ... 2,300 °F] 0 ... 1,260 °C [32 ... 2,300 °F]
TypeT	Standard Special	0 ... 370 °C [32 ... 698 °F] 0 ... 370 °C [32 ... 698 °F]

Model		Material	Cable entry thread size	Ingress protection (max.) 1) IEC/EN 60529	Cap	Surface	Connection to neck tube
	BS	Aluminium	■ M20 x 1.5 ■ ½NPT	IP65 2)	Flat cover with 2 screws	Blue, painted (RAL 5022)	■ M24 x 1.5 ■ ½NPT
BS	BSZ, BSZ-K BSZ-H	BSZ-H, Aluminium	BSS ■ M20 x 1.5 ■ ½NPT	BSS-H IP65 2)	BVS BVS Raised hinged cover with cylinder head screw	(NuG) Blue, painted (RAL 5022)	1/4000 ■ M24 x 1.5 ■ ½NPT

Model	Explosion protection
	Without	Ex i (gas) Zone 0, 1, 2	Ex i (dust) Zone 20, 21, 22	Ex e (gas) Zone 1, 2	Ex t (dust) Zone 21, 22
BS	x	x	-	-	-
BSZ-H	x	x	x	x 3)	x 3)

Смотреть все (20)

Material	Cable entry thread size	Ingress protection (max.) 1) IEC/EN 60529	Cap	Surface	Connection to neck tube
KN4-A	Aluminium	■ ½NPT ■ M20 x 1.5	IP65 2)	Screw-on lid	Blue, painted (RAL 5022)	■ M24 x 1.5 ■ ½NPT
KN4-P 4)	Polypropylene	½NPT	IP65 2)	Screw-on lid	White	½NPT
BVC 1/4000 F	Aluminium	■ ½NPT ■ ¾NPT ■ M20 x 1.5	IP66 2)	Screw-on lid	Blue, painted (RAL 5022)	½NPT
5/6000 1/4000 S	7/8000 Stainless steel	7/8000 DIH50 ■ ½NPT ■ ¾NPT ■ M20 x 1.5	KN4-P andere Anschlussgehäuse IP66 2)	BVC Screw-on lid	Natural finish	½NPT
7/8000W	Aluminium	■ ½NPT ■ ¾NPT ■ M20 x 1.5	IP66 2)	Screw-on lid	Blue, painted (RAL 5022)	½NPT
7/8000 DIH50 7/8000 S	andere Anschlussgehäuse Stainless steel	KN4-P ■ ½NPT ■ ¾NPT ■ M20 x 1.5	BVC IP66 2)	Screw-on lid	Natural finish	½NPT

Model	Explosion protection
	Without	Ex i (gas) Zone 0, 1, 2	Ex i (dust) Zone 20, 21, 22	Ex t (dust) Zone 21, 22	Ex nA (gas) Zone 2
KN4-A	x	x	-	-	-
KN4-P 4)	x	-	-	-	-
1/4000 F	x	x	-	-	-
1/4000 S	x	x	-	-	-
7/8000W	x	x	-	-	-
7/8000 S	x	x	-	-	-

Measuring insert

Versions	Vibration-resistant, sheathed cable (mineral-insulated cable, MI cable)
Optimal heat transfer	Requirement	■ Correct measuring insert length ■ Correct measuring insert diameter
Bore diameter of the thermowell	Max. 1 mm[0.04 in] larger than measuring insert diameter
Gap width	For joint width > 0.5 mm[> 0.02 in] between thermowell and measuring insert: →Negative impact on heat transfer →Unfavourable response behaviour of the thermometer
Measuring insert diameter Ø d	■ 3.0mm ■ 6.0mm ■ 8.0mm ■ 1/8 in or 0.125 in [3.17 mm] ■ 3/16 in or 0.188 in [4.75 mm] ■ 1/4 in or 0.250 in [6.35 mm]
Other measuring insert diameters on request
Insertion length	When fitting the measuring insert into a thermowell, it is very important to determine the correct insertion length (= thermowell length for bottom thicknesses of ≤ 5.5 mm[≤ 0.22 in]). In order to ensure that the measuring insert is firmly pressed down onto the bottom of the thermowell, the insert must be spring-loaded (spring travel: 0 ... 10 mm[0 ... 0.39 in]).
Spring travel	Max. 10 mm[0.39 in]

Transmitter models	Model T16	Model T32
Transmitter data sheet	TE 16.01	TE 32.04
Figure
Output
4 ...20mA	x	x
HART ® protocol	-	x
Input	■ Type K ■ Type J ■ Type E ■ Type N ■ TypeT	■ Type K ■ Type J ■ Type E ■ Type N ■ TypeT
Explosion protection	Option	Option

Possible mounting positions for transmitters	Model T16	Model T32
BS	○	-
BSZ-H	●	●
KN4-A	○	○
KN4-P	○	○
1/4000	○	○
7/8000	○	○

Operating conditions

Ambient and storage temperature	-40 ...+80 °C [-40 ...+176 °F]
Vibration resistance	The information on vibration resistance refers to the tip of the measuring insert. →For detailed specifications on the vibration resistance of Pt100 sensors, see Technical information IN 00.17 at www.wika.de.
Standard	6 g peak-to-peak, wire-wound measuring resistor or thin film
Option	■ Vibration-resistant probe tip, max. 20 g peak-to-peak, thin-film measuring resistor ■ Highly vibration-resistant probe tip, max. 50 g peak-to-peak, thin-film measuring resistor

First index number	Degree of protection / Short description	Test parameters
Degrees of protection against solid foreign bodies (defined by the 1st index number)
5	Dust-protected	Per IEC/EN 60529
6	Dust-tight	Per IEC/EN 60529
Degrees of protection against water (defined by the 2nd index number)
4	Protected against splash water	Per IEC/EN 60529
5	Protected against water jets	Per IEC/EN 60529
6	Protected against strong water jets	Per IEC/EN 60529
7 1)	Protected against the effects of temporary immersion in water	Per IEC/EN 60529
8 1)	Protected against the effects of permanent immersion in water	As agreed upon

Thermowell selection

Model	Data sheet	Illustration
TW10	TW95.10
TW15	TW95.15
TW20	TW95.20
TW25	TW95.25
TW30	TW95.30
TW31	TW95.31
TW50	TW95.50
TW55	TW95.55

Logo	Description	Country
	EU declaration of conformity	European Union

Description		Country
EU declaration of conformity ATEX directive Hazardous areas - Ex i Zone 0 gas Zone 1 mounting to zone 0 gas Zone 1 gas Zone 20 dust Zone 21 mounting to zone 20 dust Zone 21 dust - Ex d Zone 1 gas Zone 1 gas Zone 21 dust - Ex e Zone 1 gas Zone 2 gas Zone 21 dust Zone 22 dust	II 1G Ex ia IIC T1 ...T6 Ga II 1/2G Ex ia IIC T1 ...T6 Ga/Gb II 2G Ex ia IIC T1 ...T6 Gb II 1D Ex ia IIIC T125 ...T65 °C Da II 1/2D Ex ia IIIC T125 ...T65 °C Da/Db II 2D Ex ia IIIC T125 ...T65 °C Db II 2G Ex db IIB + H2T6 ...T4 Gb II 2G Ex db IIC T6 ...T4 Gb II 2D Ex tb IIIC T85 °C Db IP66 II 2G Ex eb IIC T1 ...T6 Gb 3) II 3G Ex ec IIC T1 ...T6 Gc X II 2D Ex tb IIICTX °C Db 3) II 3D Ex tc IIICTX °C Dc X II 3G Ex nA IIC T1 ...T6 Gc X II 3D Ex tc IIICTX °C Dc X	European Union
- Ex n Zone 2 gas Zone 22 dust IECEx - in combination with ATEX Hazardous areas - Ex i Zone 0 gas Zone 1 mounting to zone 0 gas Zone 1 gas Zone 20 dust Zone 21 mounting to zone 20 dust Zone 21 dust - Ex d Zone 1 gas Zone 1 gas Zone 21 dust - Ex e 2) Zone 1 gas Zone 2 gas Zone 21 dust Zone 22 dust - Ex n 2) Zone 2 gas	Ex ia IIC T1 ...T6 Ga Ex ia IIC T1 ...T6 Ga/Gb Ex ia IIC T1 ...T6 Gb Ex ia IIIC T125 ...T65 °C Da Ex ia IIIC T125 ...T65 °C Da/Db Ex ia IIIC T125 ...T65 °C Db Ex db IIB + H2T6 ...T4 Gb Ex db IIC T6 ...T4 Gb Ex tb IIIC T85 °C Db IP66 Ex eb IIC T1 ...T6 Gb 3) Ex ec IIC T1 ...T6 Gc X Ex tb IIICTX °C Db 3) Ex tc IIICTX °C Dc X Ex nA IIC T1 ...T6 Gc X Ex tc IIICTX °C Dc X	International
Zone 22 dust FM Hazardous areas - Ex d (XP) Division 1 gas Division	Class I, division 1, group B, C, D, T6 type 4/4X	USA and Canada
1 dust CSA Safety (e.g. electr. safety, overpressure, ...) Hazardous areas - Ex d (XP) Division 1 gas	Class II or III, division 1, group E, F, Gtype 4/4X Class I, division 1, groups B, C, D, T6 type 4/4X	USA and Canada

Logo	Description	Country
	EAC (option) Hazardous areas	Eurasian Economic Community
	- Ex n Zone 2 gas 2Ex nA IIC T6 ...T1 Gc X Ex Ukraine Hazardous areas - Ex i Zone 0 gas II 1G Ex ia IIC T1 ...T6 Ga Zone 1 mounting to zone 0 gas II 1/2G Ex ia IIC T1 ...T6 Ga/Gb	Ukraine
	Zone 1 mounting to zone 0 gas II 1/2G Ex db IIC T6 ...T4 Ga/Gb Zone 21 dust II 2D Ex tb IIIC T85 °C Db INMETRO Hazardous areas - Ex i Zone 0 gas II 1G Ex ia IIC T1 ...T6 Ga Zone 1 mounting to zone 0 gas II 1/2G Ex ia IIC T1 ...T6 Ga/Gb Zone 20 dust Ex ia IIIC T125 ...T65 °C Da Zone 21 mounting to zone 20 dust Ex ia IIIC T125 ...T65 °C Da/Db 3)	Brazil
	CCC Hazardous areas - Ex i Zone 0 gas Ex ia IIC T1 ~ T6 Ga Zone 1 gas Ex ia IIC T1 ~ T6 Gb Zone 1 mounting to zone 0 gas Ex ia IIC T1 ~ T6 Ga/Gb Zone 2 gas Ex ic IIC T1 ~ T6 Gc Zone 21 dust Ex iaD 21 T65/T95/T125°C - Ex d Zone 1 gas Ex d IIB+H2 T4~T6 Gb Zone 1 gas Ex d IIC T4~T6 Gb Zone 21 dust Ex tD A21 IP66 T85°C	China
	GOST Metrology, measurement technology	Russia
	KazInMetr	Kazakhstan
-	Metrology, measurement technology MTSCHS Permission for commissioning	Kazakhstan
	BelGIM Metrology, measurement technology	Belarus
-	UkrSEPRO Metrology, measurement technology	Ukraine
	Uzstandard
	Metrology, measurement technology	Uzbekistan

Certification type	Measurement accuracy	Material certificate
2.2 test report	x	x
3.1 inspection certificate	x	x
DAkkS calibration certificate	x	-

Overview of versions

Model	Description D
PIH-L	Connection head with flat screw-on lid
PIH-H	Connection head with high screw-on lid
PIH-W	Connection head with high screw-on lid and window
PIR-L	Connection head with flat screw-on lid, pipe or wall mounting
PIR-H	Connection head with high screw-on lid, pipe or wall mounting
PIR-W	Connection head with high screw-on lid and window, pipe or wall mounting E

Basic information

Materials
Lower part of the case PIX-X Explosion CONNECTION HEAD	Aluminium die-casting EN AC-43500 AlSi10MnMg / AA 365.0; copper content ≤ 0,05% (low copper) drawing number 14654707.01
Screw-on lid scale 1:1	Aluminium die-casting EN AC-43500 AlSi10MnMg / AA 365.0; copper content ≤ 0,05% (low copper) F reference DR 08 sheets 1 / 1
Window Check indicator size	Glass ALEXANDER WIEGAND SE & Co. KG comments
Sealing language	■ EPDM -60 ...+90 °C [-76 ... 194 °F] ■ MVQ-60 ...+110°C [-76 ... 230 °F], on request ■ FKM -20 ...+110°C [-4 ... 230 °F], on request www.wika.com D-63911 Klingenberg DEKLI1_EN_A4M_T00 26.04.2023 [inch]
Case surface
Colour	Lower body	WIKA product grey RAL 7035
Screw-on lid	WIKA product blue RAL 5022
Coating	■ PE/PU (polyester/polyurethane) powder coating ■ 90 ±40 µm thickness ■ Electrically conductive per IEC 60243-1:2013 ■ The painted test objects / surfaces were subjected to a salt mist and condensation test per C5-M, per ISO 12944-6.The evaluation per ISO 4624, ISO 4628-2/-3/- 4/-5/-6, as well as the scored areas per ISO 12994 A.2 showed no significant abnormalities. ■ Cross-cut:GT 0 (...1) per ISO 2409:2013 - 1c or 2a

Basic information
Features	■ Impact resistance of the window per IEC 60079-0:2017 point 26.4.2 ■ Pressure containment of case per IEC 60079-1:2014 point 15.2.3.2 ■ UV resistance per ISO 4892-3:2016 procedure A, cycle 3
Weight
Case with flat screw-on lid	≤ 0.85 kg [≤ 1,9 lbs]
Case with high screw-on lid	≤ 1.0 kg [≤ 2,2 lbs]
Case head with high screw-on lid and window	≤ 1.1 kg [≤ 2,4 lbs]

Overview of connection threads

Head version for direct mounting on an electrical thermometer	Left Input A	Right Input B	Bottom, to neck tube Input C
PIH-L, PIH-H, PIH-W	M20 x 1.5	Closed	M20 x 1.5, 1/2 NPT, 3/4 NPT
	M20 x 1.5	M20 x 1.5	M20 x 1.5, 1/2 NPT, 3/4 NPT
	1/2 NPT	Closed	M20 x 1.5, 1/2 NPT, 3/4 NPT
	1/2 NPT	1/2 NPT	M20 x 1.5, 1/2 NPT, 3/4 NPT
	3/4 NPT	Closed	1/2 NPT, 3/4 NPT