Case · 01
GIS 110/330 kV — substation
SF₆ monitoring in gas-insulated switchgear: GIR-10 density meter on each gas compartment, GA11 analyser during scheduled maintenance.
Why us
Four reasons to partner in the focus area «SF₆ Gas Analysis»
23 years
WIKA partnership since 2003. Serial deliveries of SF₆ instruments to Ukrainian power utilities.
100 %
Line coverage — from the portable GA11 analyzer to the GIR-10 GIS density meter. The full series is available in Ukraine through AVIGAN.
UA
Technical support in Ukrainian: specs, installation supervision, verification, personnel training.
On request
Typical lead time for SF₆ instruments through the official WIKA channel.
Equipment line
Coverage of the series «SF₆ Gas Analysis»
Analytic instrument for SF6 gas and alternative insulating gases
1.03…40 bar abs · TFT-Touchscreen · IP67
Price on requestDetails →
Gas detector
0…2000 ppmv · Visual alarm · 0…50 °C
Price on requestDetails →
Gas density monitor with reference chambe
0…12.5 bar · Potential-free change-over contacts · ±70 mbar to ±200 mbar depending on range and temperature
Price on requestDetails →
Emission monitor for SF6 gas
800…1150 mbar abs. · 4 ... 20 mA · ≤ 100 ppmv ±5 ppmv
Price on requestDetails →
Antenna
IP54 · -25…85 °C
Price on requestDetails →
Gas density sensor
0…2 bar · Modbus® RTU · ±1.25% (standard)
Price on requestDetails →
Gas density monitor
1.6…25 bar · Magnetic snap-action contact · ±1 % at +20 °C
Price on requestDetails →
Compact SF6 service equipment
0…10 bar · IP20 · 5…40 °C
Price on requestDetails →
SF6 service equipment
0…10 bar abs. · IP42 · 0…40 °C
Price on requestDetails →
SF6 service equipment
IP42 · -10…40 °C
Price on requestDetails →
Reader
Relay · IP40 · -20…45 °C
Price on requestDetails →
Calibration system
0…8.87 bar · WIKA-Wireless · 0.6 % FS
Price on requestDetails →
Application examples
Typical engineering tasks
Case · 02
Transformer switchgear servicing
Service station GPU-B-2000 — evacuation from compartment, purification via GPF-10, refill without atmospheric losses.
Case · 03
Lab control of secondary SF₆
GA11 for incoming control of regenerated gas per IEC 60480: purity ≥ 97 %, moisture ≤ 200 ppmv.
Standards & certificates
Relevant regulations
IEC 60480
Reuse of SF₆ — purity criteria
IEC 62271-4
Handling of SF₆ in HV equipment
EU 2024/573
EU F-Gas regulation — gas accounting
EAC
Customs Union TR CU
Ready to discuss the project
Request a quote — reply within 1 business day
Describe media parameters, pressures, temperatures, certification requirements — an engineer will propose WIKA models and (when needed) analogues.