מד לחץ עם צינור בורדון ומגעי מתג
תיאור
בכל מקום שבו יש צורך להציג מקומית את לחץ התהליך, ובו-בזמן נדרשת החלפה של מעגלים, מד-מתג זה מוצא את ייעודו.
מגעי מתג (מגעי מתג חשמליים) יוצרים או מנתקים מעגל בקרה חשמלי בהתאם למיקום המחוג של מכשיר המדידה המציין. מגעי המתג ניתנים לכיוון לכל אורך טווח סקלת המדידה (ראה DIN 16085), ומותקנים בעיקר מתחת לדיאלה, אם כי גם בחלקם על גבי הדיאלה. מחוג המכשיר (מחוג הערך בפועל) נע בחופשיות לאורך כל טווח הסקאלה, ללא תלות בכיוון.
ניתן לכוון את המחוג המכוון באמצעות מפתח כיוון נשלף דרך החלון.
לאישורים נוספים, ראה עמוד 11
דגם PGS23.063 עם דגם מגע מתג 830 E.21
ניתן לכוון גם מגעי מתג המורכבים מ-2 מגעים לנקודת כיוון אחת. פעולת המגע מתבצעת כאשר מחוג הערך בפועל נע מעבר או מתחת לנקודת הכיוון הרצויה.
מד הלחץ מיוצר בהתאם לכל הדרישות של כל התקנים והתקנות הבין-לאומיים הרלוונטיים לצורך הצגה באתר של לחץ העבודה של מכלי לחץ.
כמגעי מתג זמינים מגעי הצמדה מגנטיים עם פעולת קפיצה, מתגי קנה (reed switches), מגעים אינדוקטיביים ומגעים אלקטרוניים. ניתן להשתמש במגעים אינדוקטיביים באזורים מסוכנים. להפעלה של בקרי לוגיקה מתוכנתים (PLC) ניתן להשתמש במגעים אלקטרוניים ובמתגי קנה.
תכונות מיוחדות
- עד 2 מגעי מיתוג לכל מכשיר
- מכשירים עם מגעים אינדוקטיביים לשימוש באזורים מסוכנים
- מכשירים עם מגעים ליישומי PLC
- גרסת בטיחות עם דופן אחורית מוצקה (Solidfront)
שאלות ותשובות
מהו טווח המדידה של המד?
המד זמין בטווחים מ-0 … 4 bar ועד 0 … 400 bar, לרבות טווחי ואקום/לחץ משולב כגון -1 … 30 bar. זמינים גם יחידות kPa, MPa, psi ו-inHg.
כמה מדויק המד?
מחלקת דיוק 1.6 בהתאם לתקן EN 837-1.
אילו חיבורי תהליך זמינים?
בין היתר G ¼ B, G ½ B, R ¼, R ½, ¼ NPT ו-½ NPT, וכן גרסאות בקוטר 1/8".
אילו מדיומים המד מתאים להם?
מדיה גזית ונוזלית אגרסיבית שאינה צמיגה מאוד ואינה מתגבשת. החלקים הבאים במגע עם המדיום עשויים stainless steel 1.4404 (316L) או Monel 400 (2.4360).
מה טווח הטמפרטורות המותר?
טמפרטורת סביבה -20 … +60 °C וטמפרטורת מדיום -20 … +100 °C.
האם המד מאושר לאזורים מסוכנים?
כן, בתצורה עם מגעים אינדוקטיביים: II 2G Ex ia IIC T6/T5/T4 Gb לגז ו-II 2D Ex ia IIIB T135°C Db לאבק.
מה מייחד את דגם זה מדגמים אחרים בסדרה?
PGS23.063 הוא הגרסה בקוטר דיאל 63 מ"מ של משפחת PGS23, עם עד שני מגעי מתג, גרסת בטיחות Solidfront ותמיכה ביישומי PLC באמצעות מגעים אלקטרוניים או reed switch.
הרכיבו PGS23.063 לפי המשימה
המק״ט נבנה אוטומטית. בספק — פנו למהנדס; נסייע לפי פרמטרי הקו.
- דגםPGS23
- גודל נומינלי063
- מתגmagnetic snap action switch, model 821
- פעולת מתג ראשונהmakes (1)
- פעולת מתג שנייהwithout
- הגנה מפני פיצוץwithout
- חיבור חשמלי2 m cable
- יחידת סולם חיצוניbar
- טווח מדידהgauge pressure range
- טווח סקלָה0...4 bar
- סולם 2 או סולם מיוחד—
- חיבור תהליך—
- מיקום החיבור—
- מארזsolid front design EN837 "S3"
- אפשרות הרכבהwithout
- מגביל זרימהwithout
- מד לחץ סטנדרטיInternational (standard Europe)
- תכונות עיצוב מיוחדותwithout
- תעודותwithout
- אישוריםwithout
- מידע נוסף להזמנהWithout
סיימו את התצורה
בחרו את כל האפשרויות כדי לשלוח בקשה.
| דגם | PGS23.063 |
| סדרה | PGS23 |
| תת-קטגוריה | Switch gauge with electrical contacts |
| טווח לחץ | 0…4 bar · 0…6 bar · 0…7 bar · 0…10 bar · 0…14 bar · 0…16 bar · 0…20 bar · 0…25 bar · 0…30 bar · 0…40 bar · 0…0.4 MPa · 0…0.6 MPa · 0…0.7 MPa · 0…1 MPa · 0…1.4 MPa · 0…1.6 MPa · 0…2 MPa · 0…2.5 MPa · 0…3 MPa · 0…4 MPa · 0…60 psi · 0…100 psi · 0…150 psi · 0…160 psi · 0…200 psi · 0…250 psi · 0…300 psi · 0…400 psi · 0…500 psi · -1…3 bar · -1…10 bar · -1…4 bar · -1…15 bar · -1…5 bar · -1…24 bar · -1…7 bar · -1…30 bar · -1…9 bar · -100…300 kPa · -100…1000 kPa · -100…400 kPa · -100…1500 kPa · -100…500 kPa · -100…2400 kPa · -100…700 kPa · -100…3000 kPa · -100…900 kPa · -0.1…0.3 MPa · -0.1…1 MPa · -0.1…0.4 MPa · -0.1…1.5 MPa · -0.1…0.5 MPa · -0.1…2.4 MPa · -0.1…0.7 MPa · -0.1…3 MPa · -0.1…0.9 MPa · 0…7 MPa · 0…400 kPa · 0…600 kPa · 0…700 kPa · 0…800 kPa · 0…1000 kPa · 0…1400 kPa · 0…1600 kPa · 0…2500 kPa · 0…3000 kPa · 0…4000 kPa · 0…60 bar · 0…70 bar · 0…100 bar · 0…140 bar · 0…160 bar · 0…200 bar · 0…250 bar · 0…315 bar · 0…400 bar · 400…6000 kPa · 600…7000 kPa · 700…8000 kPa · 800…10000 kPa · 1000…14000 kPa · 1400…16000 kPa · 1600…20000 kPa · 2500…25000 kPa · 3000…31500 kPa · 4000…40000 kPa · 0…10 MPa · 0…14 MPa · 0…16 MPa · 0…20 MPa · 0…25 MPa · 0…31.5 MPa · 0…40 MPa · 0…600 psi · 0…800 psi · 0…1000 psi · 0…1500 psi · 0…2000 psi · 0…3000 psi · 0…4000 psi · 0…5000 psi · 0…6000 psi · -30…60 inHg · -30…200 inHg · -30…100 inHg · -30…300 inHg · -30…160 inHg |
| מחלקת דיוק | 1.6 |
| תקן דיוק | EN 837-1 |
| חיבור תהליך | G ¼ BG ½ BR ¼R ½¼ NPT½ NPTG 1/8 BG 1/4 BR 1/8R 1/41/8 NPT1/4 NPT |
| טמפ׳ תהליך | −20…+100 °C |
| אות יציאה | Magnetic snap-action contact · Inductive contact · Electronic contact · Reed switch |
| חיבור חשמלי | Cable, length 2 m, PVC |
| פונקציית מתג | Normally open, normally closed, change-over |
| מגעי מתג | 2 |
| חומר מארז | Stainless steel 1.4301 (304), Stainless steel 1.4571 (316 Ti) |
| חומר חלקים רטובים | Stainless steel 1.4404 (316L), Monel 400 (2.4360), Stainless steel |
| חומר אטם | Polycarbonate, Laminated safety glass |
| טמפ׳ סביבה | −20…+60 °C |
| דרגת הגנה IP | IP54 |
| משקל | 0.6 kg |
| תקנים | CERoHS |
| הגנת התפוצצות | II 2G Ex ia IIC T6/T5/T4 GbII 2D Ex ia IIIB T135°C DbGas II 2G Ex ia IIC T6/T5/T4 GbDust II 2D Ex ia IIIB T135℃ DbGas Ex ia IIC T6/T5/T4 GbDust Ex ia IIIB T135℃ Db |
| קוטר חוגה | 63 mm |
| שפות גיליון נתונים | EN |
| bar | |
|---|---|
| 0 ... 4 | 0 ... 60 |
| 0 ... 6 | 0 ... 70 |
| 0 ... 7 | 0 ... 100 |
| 0 ... 10 | 0 ... 140 |
| 0 ... 14 | 0 ... 160 |
| 0 ... 16 | 0 ... 200 |
| 0 ... 20 | 0 ... 250 |
| 0 ... 25 | 0 ... 315 |
| 0 ... 30 | 0 ... 400 |
| 0 ... 40 | - |
| kPa | |
|---|---|
| 0 ... 400 | 0 ... 6,000 |
| 0 ... 600 | 0 ... 7,000 |
| 0 ... 700 | 0 ... 8,000 |
| 0 ... 800 | 0 ... 10,000 |
| 0 ... 1,000 | 0 ... 14,000 |
| 0 ... 1,400 | 0 ... 16,000 |
| 0 ... 1,600 | 0 ... 20,000 |
| 0 ... 2,500 | 0 ... 25,000 |
| 0 ... 3,000 | 0 ... 31,500 |
| 0 ... 4,000 | 0 ... 40,000 |
| psi | |
|---|---|
| 0 ... 60 | 0 ... 600 |
| 0 ... 100 | 0 ... 800 |
| 0 ... 150 | 0 ... 1,000 |
| 0 ... 160 | 0 ... 1,500 |
| 0 ... 200 | 0 ... 2,000 |
| 0 ... 250 | 0 ... 3,000 |
| 0 ... 300 | 0 ... 4,000 |
| 0 ... 400 | 0 ... 5,000 |
| 0 ... 500 | 0 ... 6,000 |
| 0 ... 4 | 0 ... 60 |
|---|---|
| 0 ... 6 | 0 ... 70 |
| 0 ... 7 | 0 ... 100 |
| 0 ... 10 | 0 ... 140 |
| 0 ... 14 | 0 ... 160 |
| 0 ... 16 | 0 ... 200 |
| 0 ... 20 | 0 ... 250 |
| 0 ... 25 | 0 ... 315 |
| 0 ... 30 | 0 ... 400 |
| 0 ... 40 | - |
הצגת הכול (20)
| 0 ... 0.4 | 0 ... 7 |
|---|---|
| 0 ... 0.6 | 0 ... 7 |
| 0 ... 0.7 | 0 ... 10 |
| 0 ... 1 | 0 ... 14 |
| 0 ... 1.4 | 0 ... 16 |
| 0 ... 1.6 | 0 ... 20 |
| 0 ... 2 | 0 ... 25 |
| 0 ... 2.5 | 0 ... 31.5 |
| 0 ... 3 | 0 ... 40 |
| 0 ... 4 | - |
| bar | |
|---|---|
| -1 ...+3 | -1 ...+10 |
| -1 ...+4 | -1 ...+15 |
| -1 ...+5 | -1 ...+24 |
| -1 ...+7 | -1 ...+30 |
| -1 ...+9 | - |
| -100 ...+300 | -100 ... +1,000 |
|---|---|
| -100 ...+400 | -100 ... +1,500 |
| -100 ...+500 | -100 ... +2,400 |
| -100 ...+700 | -100 ... +3,000 |
| -100 ...+900 | - |
| -30 inHg ...+60 | -30 inHg ...+200 |
|---|---|
| -30 inHg ...+100 | -30 inHg ...+300 |
| -30 inHg ...+160 | - |
| Special scale ranges | Other scale ranges on request |
|---|---|
| Unit | ■ bar ■ psi ■ kg/cm² ■ kPa ■ MPa |
| Increased overload safety | ■ Without ■ 2 times |
| Vacuum resistance | ■ Without ■ Vacuum-resistant to -1 bar |
| Dial | |
| Scale colour | Black |
| Material | Aluminium |
| Special scale | ■ Without ■ With temperature scale for refrigerant, e.g. for NH 3 :R 717 |
| Other scales, e.g. with red mark, circular arcs or circular sectors, on request → Alternatively, adhesive label set for red and green circular arcs, see data sheet AC08.03 | |
| Pointer | |
| Instrument pointer | Aluminium, black |
| Set pointer | Aluminium, red |
| -1 ...+3 | -1 ...+10 |
|---|---|
| -1 ...+4 | -1 ...+15 |
| -1 ...+5 | -1 ...+24 |
| -1 ...+7 | -1 ...+30 |
| -1 ...+9 | - |
| -0.1 ... +0.3 | -0.1 ...+1 |
|---|---|
| -0.1 ... +0.4 | -0.1 ... +1.5 |
| -0.1 ... +0.5 | -0.1 ... +2.4 |
| -0.1 ... +0.7 | -0.1 ...+3 |
| -0.1 ... +0.9 | - |
| Process connection | ||
|---|---|---|
| Standard | ■ EN 837-1 ■ ISO 7 ■ ANSI/B1.20.1 | |
| Size | ||
| EN 837-1 | ■ G¼B,male thread ■ G½B,male thread | |
| ISO 7 | ■ R ¼, male thread ■ R ½, male thread | |
| ANSI/B1.20.1 | ■ ¼NPT, male thread ■ ½NPT, male thread | |
| Restrictor | ■ Without ■ ∅0.6 mm[0.024"], stainless steel ■ ∅0.3 mm[0.012"], stainless steel ■ ∅0.6 mm[0.024"], Monel | |
| Material (wetted) | ||
| Process connection | Model PGS23 | Stainless steel 1.4404 (316L) |
| Model PGS26 | Monel 400 (2.4360) | |
| Bourdon tube | Model PGS23 | Stainless steel 1.4404 (316L) |
| Model PGS26 | Monel 400 (2.4360) |
| Output signal | |
|---|---|
| Type of contact | ■ Magnetic snap-action contact, model 821, see page 6 ■ Inductive contact, model 831, see page 7 ■ Electronic contact, model 830 E, see page 8 ■ Reed switch, model 851, see page 9 |
| Switching technology | |
| Magnetic snap-action contact, model 821 | ■ No control unit and no supply voltage required ■ Direct switching up to 250 V, 1 A |
| Inductive contact, model 831 | ■ Suitable for use in hazardous areas with corresponding control unit (model 904.xx) ■ Long service life due to non-contact sensor ■ Low influence on the indication accuracy ■ Fail-safe switching at high switching frequency ■ Insensitive to corrosion ■ Also available in safety version |
| Electronic contact, model 830 E | ■ For direct triggering of a programmable logic controller (PLC) ■ Long service life due to non-contact sensor ■ Low influence on the indication accuracy ■ Fail-safe switching at high switching frequency ■ Insensitive to corrosion |
| Reed switch, model 851 | ■ No control unit and no supply voltage required ■ Direct switching up to 250 V, 1 A ■ For direct triggering of a programmable logic controller (PLC) ■ Free from wear as without contact |
| Contact setting | ■ Contact(s) adjustable, adjustment key attached to cable socket ■ Contact(s) fixed, without adjustment lock 1) ■ Adjustment lock sealable (tamper-proof) ■ Adjustment lock sealed (tamper-proof) 1) ■ Captive adjustment key with the adjustment lock connected |
| Type of contact | Magnetic snap-action contact |
|---|---|
| Switching technology | ■ No control unit and no supply voltage required ■ Direct switching up to 250 V, 1 A |
| Number of switch contacts | Max. 2 switch contacts |
| Switching function | ■ Separate circuits with ≥ 2 switches ■ Cable break monitoring with parallel resistance (47 kΩ or 100 kΩ) The switching function of each switch is indicated by index 1, 2 or 3 |
| Model 821.1 | Normally open (clockwise pointer motion) |
| Model 821.2 | Normally closed (clockwise pointer motion) |
| Model 821.3 | Change-over contact; one contact breaks and one contact makes simultaneously when pointer reaches set point |
| Switch point setting | Set pointers of the contact pressure gauges are freely adjustable over the full scale range |
| Setting range (recommended) | 25 ... 75 %of span 1) |
| Distance between switch points | Recommended minimum distance between 2 contacts: 20 %of span |
| Switch hysteresis | 2 ... 5 %(typical) |
| Switching current | 0.02 ... 0.3 A (resistive load) Permissible switch-on and switch-off current: ≤ 0.5 A |
| Switching voltage 2) | AC/DC 24 ...250V |
| Switching power | |
| Unfilled instruments | ≤ 30 W, ≤ 50VA |
| Filled instruments | ≤ 20 W, ≤ 20VA |
| Contact material | Silver-nickel, gold-plated |
| Switching voltage | Unfilled instruments | Filled instruments | ||||
|---|---|---|---|---|---|---|
| Resistive load | Inductive load | Resistive load | Inductive load | |||
| Direct current | Alternating current | cos ϕ>0.7 | Direct current | Alternating current | cos ϕ>0.7 | |
| DC 220 V / AC 230 V | 100mA | 120mA | 65mA | 65mA | 90mA | 40mA |
| DC 110 V / AC 110 V | 200mA | 240mA | 130mA | 130mA | 180mA | 85mA |
| DC 48 V / AC 48 V | 300mA | 450mA | 200mA | 190mA | 330mA | 130mA |
| DC 24 V / AC 24 V | 400mA | 600mA | 250mA | 250mA | 450mA | 150mA |
| Type of contact | Inductive contact |
|---|---|
| Switching technology | ■ Suitable for use in hazardous areas with corresponding control unit (model 904.xx) ■ Long service life due to non-contact sensor ■ Low influence on the indication accuracy ■ Fail-safe switching at high switching frequency ■ Insensitive to corrosion ■ Safety version available |
| Number of switch contacts | Max. 2 switch contacts |
| Switching function | Contact versions: ■ 831-N ■ 831-SN, safety version 1) ■ 831-S1N, safety version 1) , inverted signal |
| The switching function of each switch is indicated by index 1 or 2 | |
| Model 831.1 | Normally open (clockwise pointer motion) |
| Model 831.2 | Normally closed (clockwise pointer motion) |
| Switch point setting | Set pointers of the contact pressure gauges are freely adjustable over the full scale range |
| Setting range (recommended) | 10 ... 90 %of span (0 ... 100 %onrequest) |
| Distance between switch points | 2 contacts can be set to an identical set point. |
| Switching current | Depending on the control unit used, see data sheet AC 08.04 |
| Switching voltage | Depending on the control unit used, see data sheet AC 08.04 |
| Switching power | Depending on the control unit used, see data sheet AC 08.04 |
| Permissible temperature ranges in hazardous areas | |
| T6 | -20 ...+60 °C |
| T5 ...T1 | -20 ...+70 °C |
| T135°C | -20 ...+70 °C |
| Model | Version | Ex version |
|---|---|---|
| 904.28 KFA6 - SR2 - Ex1.W | 1 contact | Yes |
| 904.29 KFA6 - SR2 - Ex2.W | 2 contacts | Yes |
| 904.30 KHA6 - SH - Ex1 | 1 contact | Yes - Safety version |
| 904.33 KFD2 - SH - Ex1 | 1 contact | Yes - Safety version |
| 904.25 MSR 010-I | 1 contact | No |
| 904.26 MSR 020-I | 2 contacts | No |
| 904.27 MSR 011-I | Two-point control | No |
| Type of contact | Electronic contact (PNP transistor) |
|---|---|
| Switching technology | ■ For direct triggering of a programmable logic controller (PLC) ■ Long service life due to non-contact sensor ■ Low influence on the indication accuracy ■ Fail-safe switching at high switching frequency ■ Insensitive to corrosion |
| Number of switch contacts | Max. 2 switch contacts |
| Switching function | Contact versions: ■ 2-wire system ■ 3-wire system |
| The switching function of each switch is indicated by index 1 or 2 | |
| Model 830 E.1 | Normally open (clockwise pointer motion) |
| Model 830 E.2 | Normally closed (clockwise pointer motion) |
| Setting range (recommended) | 10 ... 90 %of span 1) |
| Distance between switch points | 2 contacts can be set to an identical set point. |
| Switching current | ≤ 100mA |
| Switching voltage | DC 10 ...30V |
| Type of contact | Bistable reed switch |
|---|---|
| Switching technology | ■ No control unit and no supply voltage required ■ Direct switching up to 250 V, 1 A ■ For direct triggering of a programmable logic controller (PLC) ■ Free from wear as without contact |
| Number of switch contacts | 1 switch contact |
| Switching function | The switching function of the switch is indicated by index 1, 2 or 3 |
| Model 851.1 | Normally open (clockwise pointer motion) |
| Model 851.2 | Normally closed (clockwise pointer motion) |
| Model 851.3 | Change-over contact; one contact breaks and one contact makes simultaneously when pointer reaches set point |
| Switch point setting | Set pointers of the contact pressure gauges are freely adjustable over the full scale range |
| Setting range (recommended) | 10 ... 90 %of span |
| Switch hysteresis | 3 ...5% |
| Switching current | ≤ AC/DC 1 A |
| Switching voltage | ≤ AC/DC 250V |
| Switching power | ≤ 60 W, 60VA |
| Contact material | Rhodium |
| Transport current | AC/DC 2 A |
| Inductive load cosϕ | 1 |
| Contact resistance (static) | 100mΩ |
| Insulation resistance | 10 9 Ω |
| Breakdown voltage | DC 1,000V |
| Switching time incl. contact chatter | 4.5 ms |
| Logo | Description | Region |
|---|---|---|
| EU declaration of conformity | European Union | |
| EMCdirective | ||
| RoHS directive | ||
| - | CRN Safety (e.g. electr. safety, overpressure, ...) | Canada |
לא מצאתם תשובה בתיעוד? מהנדס יענה במהלך יום עסקים.
שאלו מהנדס →132 מק״טים סטנדרטיים של משפחת PGS23
אם ידוע הקוד — בחרו ישירות. אם לא — השתמשו בתצורה במצב «01».


