What it means
F02153 means that a technology function activated in the configuration does not exist on the drive device. The abbreviations in the message title stand for TEC = Technology Extension and DCB = Drive Control Block; the manual names a Technology Extension and a DCB library as examples of the technology functions involved.
Why it appears
- The configuration activates a technology function that does not exist on the drive device.
- This situation arises when a project is downloaded to the drive or when the drive powers up.
What to check
- Load the required technology function onto the drive device.
- If the technology function is not required, deactivate it in the configuration.
Acknowledging and restarting
Once the required technology function is present on the device, or the unneeded function has been removed from the configuration, acknowledge the fault immediately.
The same on every family
Every manual that describes F02153 gives it the same reaction, acknowledgement and message class.
| Drive family | Reaction | Acknowledge | Message class | Component | Manual |
|---|---|---|---|---|---|
| G130, G150 | NONE | IMMEDIATELY | Hardware/software error (1) | None | SINAMICS G130, G150 List Manual · p. 1511 |
| S120, S150 | NONE | IMMEDIATELY | Hardware/software error (1) | None | SINAMICS S120, S150 List Manual · p. 2737 |
The drives this code lives on
F02153 is described for G130, G150, S120, S150. These are the converters of those families in our catalogue — price on request.
Questions technicians ask
What does fault F02153 mean on a SINAMICS drive?
It means a technology function activated in the configuration does not exist on the drive device. The manual names a Technology Extension and a DCB library as examples of such functions.
Why does F02153 appear when I download a project or power up the drive?
Because the configuration activates a technology function that the device does not carry. The manual lists project download and power-up as the moments when this occurs.
How do I clear fault F02153?
Load the required technology function to the drive device, or deactivate the technology function in the configuration if it is not required. Then acknowledge the fault immediately.
Which drives report F02153?
The List Manuals describe this message for G130, G150, S120 and S150.
Codes next to this one
Source
Written from Siemens' own List Manuals and operating instructions; every number, designation and parameter on this page is checked against them before publication.
All SINAMICS codes: fault and alarm codes · the F02xxx group · SINAMICS manuals · Siemens manuals