What it means
A13032 reports that the "Trial License" function was activated on the drive and that the last of the available periods is expiring. It is the drive's notice that the trial license has reached its final period.
Why it appears
- The "Trial License" function was activated on this drive.
- The last of the periods available under this trial license is expiring.
What to check
- No remedial action is necessary — the manual marks the remedy for this alarm as not necessary.
- If you want to follow the license state while the alarm is standing, look at p9918 and r9919, which the manual references together with this alarm.
Parameters the manual names
- p9918 (Licensing active Trial License) — shows whether the Trial License is the active licensing on this drive; this is the function whose last period A13032 announces.
- r9919 (Licensing Trial License status) — displays the Trial License status that the manual references with this alarm, so you can read the license state behind the message.
Acknowledging and restarting
No acknowledgment is needed. The drive withdraws the alarm automatically after the last Trial License period has expired.
The same on every family
Every manual that describes A13032 gives it the same reaction, acknowledgement and message class.
| Drive family | Reaction | Acknowledge | Message class | Component | Manual |
|---|---|---|---|---|---|
| S120, S150 | NONE | NONE | Error in the parameterization / configuration / commissioning procedure (18) | Control Unit (CU) | SINAMICS S120, S150 List Manual · p. 2934 |
The drives this code lives on
A13032 is described for S120, S150. These are the converters of those families in our catalogue — price on request.
Questions technicians ask
What does alarm A13032 on my SINAMICS S120 mean?
It means the "Trial License" function was activated and the last of the available periods is expiring.
How do I clear alarm A13032?
You do not need to do anything. The alarm is automatically withdrawn after the last period has expired, and no acknowledgment is required.
Which parameters belong to A13032?
p9918 (Licensing active Trial License) and r9919 (Licensing Trial License status); the manual references both with this alarm.
Codes next to this one
Source
Written from Siemens' own List Manuals and operating instructions; every number, designation and parameter on this page is checked against them before publication.
All SINAMICS codes: fault and alarm codes · the A13xxx group · SINAMICS manuals · Siemens manuals