Chain hoist test set
Description
The FRKPS is used to check the overload protection of chain hoists. The set consists of the force transducer with chain adapters and the hand-held indicator. For the testing, the force transducer is hung on the chain, moves upwards with the chain against the bottom of the chain hoist and thereby blocks the chain.
The force transducer is designed as a shear beam load cell and is therefore insensitive to parasitic forces and torques. The output signal is fed to the hand-held indicator via cable. Two chain adapters and three chain centring sleeves accompany the instrument to allow testing all chain hoists occurring in the specified load range.
Chain hoist test set, model FRKPS
The battery-operated model FE630 hand-held indicator evaluates the signals supplied by the force transducer with a very high sampling rate of 7,200 Hz. The hand-held indicator makes it easier to read the values directly.
In the transport case:
- ■ Instrument consisting of: - ■ Force transducer with 10 m cable and M9 connector - ■ 3 chain centring sleeves - ■ 2 chain adapters - ■ Calibration certificate - ■ Supplied accessory (model FE630) - ■ Operating instructions
Special features
- Measuring ranges 40 ... 3,500 kg [88 ... 7,720 lb]
- No more cumbersome handling with test weights
- One-sensor concept for the entire load range
- Maximum- / minimum value memory
- For testing in accordance with the Machinery Directive 2006/42/EG
| Model | FRKPS |
| Product family | FRKP |
| Subcategory | Test set for chain hoists |
| Force ranges | 40…3500 kg · 88…7720 lb |
| Accuracy class | ≤ 0.5 % Fnom |
| Process temperature | +0…+80 °C |
| Mounting type | shear-beam |
| Output signal | 2.0±0.2 mV/V |
| Cell material | stainless steel |
| Ambient temperature | −20…+80 °C |
| IP rating | IP67 |
| Weight | 2.5 kg |
| Certifications | RoHSEACCE |
| Overload protection | 120 % |
| Cable length | 10 m |
| Datasheet languages | EN, DE |
| Unit | A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|---|
| mm | 145 | 62 | 56 | 80 | 171 | 95 | 60 |
| inch | 5.71 | 2.44 | 2.2 | 3.15 | 6.73 | 3.74 | 2.36 |
| Model | Description | Order number |
|---|---|---|
| FE630 | Hand-held indicator for displaying and reading the measured values | 14785125 |
| AZK08 | Adapter set for profile steel chains incl. chain centring sleeves and chain adapters | 14426883 |
Couldn't find the answer in the documentation? An engineer will reply within a business day.
Ask an engineer →1 standard articles of family FRKP
If you know the code — pick directly. If not — use the configurator in mode “01”.