AI helper
Describe the task — I'll match 3 WIKA models in 30 seconds
111.16 1
111.16
On order
WIKA · Pressure measurement · Family 111

Bourdon tube pressure gauge, copper alloy

Bourdon tube pressure gauge, copper alloy, panel mounting series
Range
-1…400 bar
Accuracy
2.5
Protection
IP41
UKCAPEDCECRN
Price
On request
Depends on configuration
Request a quote
+38 (067) 285-77-70·info@avigan.com.uaViberTelegram

Description

The models 111.16 and 111.26 have been specifically designed for panel mounting and therefore feature a back mount process connection.

The model 111 pressure gauges are based on the proven Bourdon tube measuring system. On pressurisation, the deformation of the Bourdon tube, proportional to the incident pressure, is transmitted to the movement via a link and indicated.

For easy installation, the plastic cases of the panel mounting series are already equipped with a mounting flange.

For further approvals, see page 6

Fig. left: Model 111.16

Fig. right: Model 111.26

The model 111.16 Bourdon tube pressure gauge can be fitted to the control panel by means of a mounting bracket (accessory). The model 111.26 is mounted to the panel by 'snap-in mounting' using lateral locating lugs at the case. In addition, metallised front bezels can be supplied for the model 111.26.

The panel mounting series of model 111 is also available in customer-specific versions, e.g. with individual dial layout.

Special features

  • Specifically for panel mounting
  • Reliable and cost-effective
  • Version per EN 837-1 or ASME B40.100
  • Scale ranges to 0 ... 400 bar or 0 ... 6,000 psi
Configurator · Step by step

Build a 111.X6 for your task

The article number is assembled automatically. If unsure — ask an engineer; we'll match the line's parameters.

Step 1 of 4
Configuration structure· click a highlighted segment to jump to that parameter

The unit of the main scale of a pressure gauge is the unit of measurement in which the measured pressure value is displayed. Typical units for the main scale of a pressure gauge are: - Bar (bar) - Pascal (Pa) - Kilopascal (kPa) - Pounds per square inch (psi) - Kilograms per square metre (kg/cm²) The selection of the unit for the main scale depends on the specific requirements of the application and the region. Further information can be found in the following video: <iframe width="560" height="315" src="https://www.youtube.com/embed/b70uwtUaGs8?si=FfeEgrudrktswQta" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>

Your configuration
  • Model111.16 panelmounting
  • Nominal size040 mm
  • Unit of outer Scale—
  • Measuring range—
  • Scale range—
  • 2nd Scale or Special Scalewithout
  • Process connection—
  • Connector locationcenter back mount
  • Caseblack plastic with flange for panel mounting
  • Bezel ringwithout
  • Mounting flange/bracketwithout
  • Windowplastic, clear
  • Restrictorwithout
  • Accuracy classclass 2.5
  • Set / drag pointerwithout
  • Special design featureswithout
  • Certificateswithout
  • Approvalswithout
  • Additional approvalswithout
  • Additional ordering informationWithout
AI suggestion by parameters

Finish your configuration

Select every option to submit the request.

Send request
Send request