مساعد الذكاء الاصطناعي
صف المهمة — سأختار 3 موديلات WIKA خلال 30 ثانية
TR36 1
TR36
متوفر في مخزون WIKA
WIKA · قياس درجة الحرارة · العائلة TR

ترمومتر مقاومة

مقياس حرارة مقاوم (Resistance thermometer) ملولب، إصدار مدمج مع خرج مستشعر Pt100/Pt1000 أو خرج من جهاز إرسال 4-20mA، للاستخدام في بناء الآلات، وإنشاء المصانع، والهيدروليك.
النطاق
-50…250 °C
الخرج
4-20mA · HART
الدقة
±0.25 K or 0.25 % of set span
الحماية
IP65
RoHSCE2.2 test report3.1 inspection certificateDAkkS calibration certificate
السعر
ابتداءً من ‏96 €
يُحدَّد عند الطلب
+38 (067) 285-77-70·info@avigan.com.uaViberTelegram

الوصف

تُستخدم موازين الحرارة المقاومة لهذه السلاسل كأجهزة قياس حرارة عالمية لقياس الوسائط السائلة والغازية في نطاق -50 ... +250 °C [-58 ... +482 °F].

يمكن استخدامها لضغوط تصل إلى 140 bar [2,030 psi] مع أقطار أنابيب الحماية 3 mm [0.12 in]، وحتى 270 bar [3,916 psi] مع أقطار أنابيب الحماية 6 mm [0.24 in]، وحتى 400 bar [5,801 psi] مع أقطار أنابيب الحماية 8 mm [0.31 in]، وذلك اعتمادًا على إصدار الجهاز. جميع المكونات الكهربائية محمية ضد رذاذ الماء ومصممة لتحمّل الاهتزاز (8 g، اعتمادًا على إصدار الجهاز).

المزايا

  • مدى المستشعر -50 ... +250 °C [-58 ... +482 °F]
  • تصميم مدمج
  • التوصيل الكهربائي عبر موصل زاوي DIN EN 175301-803 نموذج A
  • مع خرج حساس مباشر (Pt100 بتوصيل سلكي ثنائي أو ثلاثي أو رباعي) أو مرسل مدمج
  • مُرسل مدمج بإشارة خرج 4 ... 20 mA، قابل للمعايرة الفردية باستخدام برنامج WIKAsoft-TT المجاني لتهيئة الحاسوب

الأسئلة والأجوبة

ما هو نطاق القياس لهذا الجهاز؟

نطاق المستشعر هو -50 ... +250 °C [-58 ... +482 °F]، حسب الإصدار المختار.

ما هي دقة القياس؟

فئة الدقة هي ±0.25 K أو 0.25 % من المدى المضبوط، والمستشعر من نوع Pt100 بفئة A.

ما هي وصلات العملية المتاحة؟

تشمل الوصلات الملولبة M12 x 1.5، M20 x 1.5، G 1/4 B، G 3/8 B، G 1/2 B، 1/4 NPT، 1/2 NPT، بالإضافة إلى وصلة الضغط (compression fitting) وخيار التوريد بدون وصلة عملية.

ما هي إشارات الخرج المتوفرة؟

خرج مستشعر مباشر Pt100/Pt1000 (في اتصال 2 أو 3 أو 4 أسلاك)، أو جهاز إرسال مدمج بإشارة 4-20mA مع دعم HART قابل للتهيئة عبر البرنامج.

كيف يتم توصيل الجهاز كهربائيًا؟

عبر موصل زاوي وفق DIN EN 175301-803 form A، مع تغذية DC 10 ... 30 V لجهاز الإرسال.

هل يمكن تهيئة جهاز الإرسال؟

نعم، جهاز الإرسال المدمج بإشارة 4 ... 20 mA قابل للمعايرة الفردية باستخدام برنامج WIKAsoft-TT المجاني للكمبيوتر.

ما هي شهادات المطابقة المتوفرة؟

RoHS وCE، مع خيارات توثيق تشمل تقرير اختبار 2.2، وشهادة فحص 3.1، وشهادة معايرة DAkkS.

ما الذي يميز TR36 عن غيره؟

تصميمه المدمج الملولب مع خيار الخرج المباشر أو جهاز الإرسال المدمج، مما يجعله مناسبًا لبناء الآلات وتقنية الدفع والهيدروليك حيث تكون المساحة محدودة.

التعريف
الطرازTR36
السلسلةTR
النوع الفرعيThreaded resistance thermometer
نطاق القياس
نطاق درجة الحرارة−50…+250 °C · −30…+150 °C · −30…+250 °C · −50…+150 °C
دقة القياس
فئة الدقة±0.25 K or 0.25 % of set span
ظروف العملية
وصلة العملية
M12 x 1.5M20 x 1.5G 1/4 BG 3/8 BG 1/2 B1/4 NPT1/2 NPTG¼BG⅜BG½B¼NPT½NPTThreaded (parallel or tapered)Compression fittingWithout process connection
درجة حرارة العملية−50…+250 °C
الخصائص الكهربائية
إشارة الخرج4-20mA · HART · HART (configurable via software)
التغذيةDC 10 ... 30 V
وصلة كهربائيةAngular connector DIN EN 175301-803 form A
المواد
مادة المجسStainless steel 1.4571, 1.4571, Stainless steel
بيئة التشغيل
حرارة المحيط−40…+85 °C
تصنيف IPIP65
الوزن0.45 kg
الشهادات والموافقات
الشهادات
RoHSCE2.2 test report3.1 inspection certificateDAkkS calibration certificate
تفاصيل إضافية
نوع المستشعرPt100
فئة المستشعرA
طول المجس100 mm
قطر المجس3 mm
جراب الحرارةلا
لغات ورقة البياناتEN, DE
جداول من ورقة البيانات
Measuring element
Type of measuring element
Version 4 ...20mAPt1000 (measuring current < 0.3 mA;self-heating can be ignored)
Version Pt100Pt100 (measuring current 0.1 ... 1.0 mA)
→ For detailed specifications for Pt sensors, see Technical information IN 00.17 at www.wika.com.
Connection method
Version 4 ...20mA2-wire
Version Pt1002-wireThe lead resistance is recorded as an error in the measurement
3-wireWith a cable length of 30 mor longer, measuring deviations can occur
4-wireThe lead resistance can be ignored
Tolerance value of the measuring element 1) per IEC 60751
Version 4 ...20mAClass A
Version Pt100■ Class A ■ Class B at2-wire
Accuracy specifications (4 ... 20 mA version)
Tolerance value of the measuring element 1) per IEC 60751Class A
Measuring deviation of the transmitter per IEC 62828±0.25 K or 0.25 %of the set span (greater value applies)
Total measuring deviation per IEC 62828 2)Measuring deviation of the measuring element + transmitter
Influence of ambient temperature0.1 %of the set measuring span / 10 KT a
Influence of supply voltage±0.025 %of the set measuring span /V (depending on the supply voltage U B )
Influence of load±0.05 %of the set measuring span / 100Ω
LinearisationLinear to temperature per IEC 60751
Output error±0.1% 3) of the set measuring span
Reference conditions
Ambient temperatureT a ref23 °C
Supply voltage U B refDC 24V
Measuring range
Temperature range
Version 4 ...20mAWithout neck tube -30 ...+150 °C [-22 ...+302 °F] With neck tube -30 ...+250 °C [-22 ...+482 °F] 1)
Version Pt100Class AWithout neck tube -30 ...+150 °C [-22 ...+302 °F] With neck tube -30 ...+250 °C [-22 ...+482 °F] 1)
Class BWithout neck tube -50 ...+150 °C [-58 ...+302 °F] With neck tube -50 ...+250 °C [-58 ...+482 °F] 1)
Unit (4 ... 20 mA version)Configurable °C, °F, K
Temperature at the connector (Pt100 version)Max. 85 °C [185 °F]
Measuring span (4 ... 20 mA version)Minimum 20 K, maximum 300 K
Process connection
Type of process connection■ G¼B ■ G⅜B ■ G½B ■ ¼NPT ■ ½NPT ■ M12 x 1.5 ■ M20 x 1.5
Protection tube
Protection tube diameter■ 3 mm[0.12 in] ■ 6 mm[0.24 in] ■ 8 mm[0.31 in]
Insertion length U 1■ 50 mm[1.97 in] ■ 75 mm[2.95 in] 1) ■ 100 mm[3.94 in] 1) ■ 120 mm[4.72 in] 1) ■ 150 mm[5.91 in] 1) ■ 200 mm[7.87 in] 1) ■ 250 mm[9.84 in] 1) ■ 300 mm[11.81 in] 1) ■ 350 mm[13.78 in] 1) ■ 400 mm[15.75 in] 1) Other insertion lengths on
request
Material (wetted)Stainless steel 1.4571
عرض الكل (10)
Output signal (4 ... 20 mA version)
Factory configuration
Measuring rangeMeasuring range 0 ... 150 °C [32 ... 302 °F]
Other measuring ranges are adjustable
Current signals for error signallingConfigurable in accordance with NAMUR NE 043 downscale < 3.6 mA(3.5 mA) upscale > 21.0 mA(21.5 mA)
Current value for sensor short-circuitNot configurable in accordance with NAMUR NE 043 downscale ≤ 3.6 mA(3.5 mA)
Communication
Info dataTAG no., description and user message can be stored in transmitter
Configuration and calibration dataPermanently stored
Configuration softwareWIKAsoft-TT → Configuration software (multilingual) as a download from www.wika.com
Voltage supply
Supply voltage U BDC 10 ...30V
Supply voltage inputProtected against reverse polarity
Permissible residual ripple of supply voltage10 %generated by U B < 3 %ripple of the output current
Time response
Switch-on delay, electricalMax. 4 s (time before the first measured value)
Warm-up timeAfter approx. 4 minutes, the instrument will function to the specifications (accuracy) given in the data sheet.
Electrical connection
Connection typeAngular connector DIN EN 175301-803 form A for cables with 6 ...8mm [0.24 ... 0.31 in] diameter, cross-section max. 1.5 mm²
Material
Case material of the connectorPA
Flat gasketVMQ
Operating conditions
Ambient temperature range-40 ...+85 °C [-40 ...+185 °F]
Storage temperature range-40 ...+85 °C [-40 ...+185 °F]
Climate class per IEC 60654-1Cx (-40 ...+85 °C [-40 ...+185 °F], 5 ... 95 %r.h.)
Maximum permissible humidity, condensation100 %r.h., condensation allowed
Maximum operating pressure 1) 2)
For protection tube diameter 3 mm[0.12 in]140 bar [2,030 psi]
For protection tube diameter 6 mm[0.24 in]270 bar [3,916 psi]
For protection tube diameter 8 mm[0.31 in]400 bar [5,801 psi]
Salt fogIEC 60068-2-11
Vibration resistance per IEC 6075110 ... 2,000 Hz, 8 g 1)
Shock resistance per IEC 60068-2-2750 g, 6 ms, 3 axes, 3 directions, three times per direction
Ingress protection (IP code)IP65 per IEC/EN 60529
The stated ingress protection only applies when plugged in using line connectors that have the appropriate ingress protection.
WeightApprox. 0.2 ... 0.7 kg [0.44 ... 1.54 lbs] - depending on version
LogoDescriptionRegion
EU declaration of conformityEuropean Union
Certification typeMeasurement accuracyMaterial certificate
2.2 test reportxx
3.1 inspection certificatexx
DAkkS calibration certificatex-
ModelDescriptionOrder number
Programming unit Model PU-548■ Easy to use ■ LED status display ■ Compact design ■ No further voltage supply needed, neither for the programming unit nor for the transmitter (replaces programming unit model PU-448)14231581
-Adapter cable DIN angular connector for the connection of a resistance thermometer with a DIN EN 175301-803 angular connector form A to the model PU-548 programming unit14005324