مقياس ضغط رقمي دقيق
الوصف
يعتمد مقياس الضغط الرقمي الدقيق طراز CPG1500 مفهوم مقياس الضغط التناظري، وفي الوقت نفسه يعمل بدقة جهاز معايرة رقمي. وبذلك يجمع الجهاز بين دقة تكنولوجيا القياس الرقمية وبساطة أداة القياس التناظرية، ويتميز بأداء ملفت وسهولة في الاستخدام.
يقدم CPG1500 دقة تبلغ 0.1 % FS أو 0.05 % FS أو 0.025 % FS، كما يتم تعويضه عن تأثير درجة الحرارة ضمن نطاق -10 … +50 °C [14 ... 122 °F]. يمكن عرض القياسات بأي من 26 وحدة ضغط و5 وحدات مستوى، أو بوحدات مخصصة لتجنب التحويلات المعقدة.
للموافقات الإضافية، راجع الصفحة 7
مقياس ضغط رقمي دقيق، طراز CPG1500
يمكن تحديد معدل القياس من قبل المستخدم ليتوافق مع نوع القياس المطلوب. عادةً ما تستخدم التطبيقات القياسية ثلاث قيم مقاسة في الثانية. وإذا لزم الأمر، يمكن أيضًا ضبط معدل القياس هذا على 50 قيمة مقاسة في الثانية.
عبر وظيفة توفير الطاقة، ينتقل CPG1500 تلقائيًا إلى وضع "sleep" (وضع السكون)، وفي هذا الوضع يمكن زيادة عمر البطارية حتى 2,500 ساعة.
ومن خلال التنقل المبتكر عبر القائمة، يتم ضمان تشغيل بسيط. يساعد العرض الواضح، مع دمج شريط بياني للضغط (bar graph) ومساحة نص كبيرة، على إجراء تحليل فعّال لأوسع مجموعة من مواقع القياس. ومع وظيفة Min./Max. يمكن الوصول فورًا إلى ضغوط الحد الأدنى والحد الأقصى وحفظها تلقائيًا.
المزايا
- نطاقات القياس بين 0 ... 10,000 bar [0 ... 150,000 psi] كما تتوفر نطاقات قياس التفريغ والضغط المطلق
- الدقة: تصل إلى 0.025 % (شاملة شهادة المعايرة)
- نسخة آمنة جوهريًا
- وظيفة تسجيل البيانات حتى 50 قيمة قياس في الثانية
- الاتصال ببرنامج WIKA-Cal عبر Bluetooth ®
الأسئلة والأجوبة
ما هي دقة مقياس CPG1500؟
تتوفر ثلاث فئات دقة: 0.1 % FS أو 0.05 % FS أو 0.025 % FS، وتُحدد الدقة وفق المعيار IEC 61298-1، وتشمل دقة 0.025 % شهادة معايرة.
ما هي نطاقات القياس المتاحة؟
نطاقات نسبية حتى 10,000 bar [150,000 psi]، ونطاقات تفريغ مثل -1 … 40 bar و-14.5 … 300 psi و-0.25 … 0.25 mbar، ونطاقات ضغط مطلق حتى 40 bar abs. [400 psi abs.].
ما هي وصلات العملية المتوفرة؟
تشمل M20 x 1.5، وG ¼ B، وG ½ B، وG ⅜ B، و½ NPT، و¼ NPT، وR ½، و9/16-18 UNF، وF 250-C، بالإضافة إلى وصلات محببة (flush) بحلقة O-ring من NBR وخيارات أخرى.
ما هي المواد المتاحة للأجزاء المبللة؟
ستانلس ستيل 1.4404 (316L)، و1.4534 (904L)، وElgiloy® 2.4711، وHastelloy® 2.4819 (HC276)، وكذلك نسخة مطليّة بالذهب — حسب التكوين المختار.
هل يناسب الجهاز المناطق الخطرة؟
نعم، تتوفر نسخة آمنة جوهريًا (Intrinsically safe) بشهادات مثل Ex ia IIC T4 Ga وClass I, Division 1 Groups A, B, C and D T4، ما يسمح باستخدامه في Zone 0.
ما هي ظروف درجة الحرارة المسموحة؟
يعمل الجهاز ضمن نطاق درجة حرارة محيطة ووسط قدره -10 … +50 °C [14 … 122 °F]، مع تعويض تأثير درجة الحرارة ضمن هذا النطاق.
كيف يتم نقل البيانات من الجهاز؟
عبر Bluetooth® (Low Energy 4.0 أو Classic 2.1) إلى برنامج WIKA-Cal، مع وظيفة تسجيل بمعدل قابل للضبط يصل إلى 50 قيمة مقاسة في الثانية.
ما الذي يميز CPG1500 عن مقاييس الضغط التناظرية؟
يجمع بين بساطة المقياس التناظري ودقة جهاز المعايرة الرقمي: عرض واضح مع شريط بياني (bar graph)، ووظيفة Min./Max.، و26 وحدة ضغط و5 وحدات مستوى للعرض، وعمر بطارية يصل إلى 2,500 ساعة في وضع السكون.
اجمع CPG1500 لمهمتك
يُبنى رقم المادة تلقائيًا. عند الشك — تواصل مع مهندس؛ سنساعدك حسب معطيات الخط.
- حماية من الانفجارwithout
- وحدةbar
- نوع الضغطgauge
- نطاق القياس0 ... 0.1 bar gauge
- وصلة العملية—
- إصدار للوسائط المحددةnone
- الدقة0.2 % FS
- نوع الشهادة—
- الاتصال—
- مسجل بيانات—
- غطاء غلاف واقٍincl. protective housing cap
- البرمجياتwithout
- حقيبة حملwithout
- الشهادات/الاعتماداتwithout
- ملحقات إضافيةwithout
- معلومات إضافية للطلبWithout
أكمل التهيئة
اختر جميع الخيارات لإرسال الطلب.
| الطراز | CPG1500 |
| السلسلة | CPG |
| النوع الفرعي | Digital pressure gauge |
| نطاق الضغط | 0…10000 bar · 0…150000 psi · 0…40 bar abs. · 0…400 psi abs. · -0.25…0.25 mbar · -1…40 bar · -8…8 psi · -14.5…300 psi · 0…0.25 bar abs. · 0…0.35 psi abs. |
| فئة الدقة | 0.025 % FS |
| معيار الدقة | IEC 61298-1 |
| وصلة العملية | M20 x 1.5G ¼ BG ½ BG ⅜ BG ¼, female threadG ½ B flush with O-ring (NBR)G 1 B flush with O-ring (NBR)½ NPT¼ NPT½ NPT, female thread¼ NPT, female thread½ NPT, male threadR ½G ½, male thread on G ⅛, female threadM16 x 1.5, female thread, with sealing coneM20 x 1.5, female thread, with sealing cone9/16-18 UNF, female threadF 250-CM16 x 1.59/16-18 UNFG1/4BG1/2BG3/8BG1/4, female threadG1/2B flush with O-ring (NBR)1/2 NPT1/4 NPT1/2 NPT, female thread1/4 NPT, female thread1/2 NPT, male threadR1/2G1/2, male thread on G1/8, female thread9/16-18 UNF, female thread F250-C |
| درجة حرارة العملية | −10…+50 °C |
| إشارة الخرج | Bluetooth® · Bluetooth · Bluetooth® Low Energy 4.0 · Bluetooth® Classic 2.1 |
| التغذية | 3 x 1.5 V AA batteries |
| وصلة كهربائية | Bluetooth® |
| مادة العلبة | Aluminium die-casting, nickel-plated, Aluminium |
| مادة الأجزاء الملامسة | Stainless steel 1.4404 (316L), Stainless steel 1.4534 (904L), Elgiloy® 2.4711, Stainless steel 1.4435 (316L), Hastelloy® 2.4819 (HC276), Gold-plated, Stainless steel, Stainless steel 1.4404 (316L), Elgiloy® 2.4711, Stainless steel 1.4435 (316L), Hastelloy® 2.4819 (HC276), Gold-plated |
| مادة الإحكام | NBR, EPDM, G½ USIT, G¼ USIT |
| حرارة المحيط | −10…+50 °C |
| تصنيف IP | IP65 |
| الوزن | 0.68 kg |
| الشهادات | CERoHSREDFCCISEDICASAABNCRNEACREACHRCMNACE MR 0175 |
| حماية الانفجار | Ex ia IIC T4 GaEx ia IIC T4 Ga/GbEx ia IIC T4 GbII 1G Ex ia IIC T4 GaII 1/2G Ex ia IIC T4 Ga/GbII 2G Ex ia IIC T4 GbEx ia IIC T4 GcEx i Class I, Zone 0Class I, Division 1 Groups A, B, C and D T4AEx i Class I, Zone 0AEx ia IIC T4 GaEAC Ex i Zone 0 gasIntrinsically safe versionExi Class I, Zone 0 Exiia IICT4GaAExi Class I, Zone 0 AExiia IICT4GaExi Zone 0 gas ExiiaIICT4GaZone 1 connection to zone 0 gas ExiiaIICT4Ga/GbZone 1 gas ExiiaIICT4Gb |
| لغات ورقة البيانات | EN, DE, ES, FR, IT, RU, PL, NL, PT, RO, SV, EL, JA, ZH |
| Pressure types | ||
|---|---|---|
| Gauge pressure | 0 ... 10,000 bar [0 ... 150,000 psi] | |
| Absolute pressure | 0 ... 0.25 bar abs. to 0 ... 40 bar abs. [0 ... 0.35 psi abs. to 0 ... 400 psi abs.] | |
| Vacuum and +/- measuring range | -0.25 ... +0.25 mbar to -1 ... 40 bar [-8 ...+8 psi to -14.5 ... 300 psi] | |
| Accuracy 1) 2) | ■ 0.025%FS ■ 0.05%FS ■ 0.1%FS ■ 0.5%FS → Also see table 'Accuracy specifications', page 3 | |
| Connection location | Vertical mounting position, process connection lower mount | |
| Adjustment | Offset and span factor adjustable | |
| Functions | ||
| Menu functions | ■ Min./Max. alarm (visual) ■ Power-off function ■ Measuring rate ■ Mean value filter ■ Pressure rate ■ Mean value (via adjustable interval) ■ Level indication ■ Tare offset ■ Indication damping | |
| Memory | ■ Min./Max.memory ■ Integrated data logger | |
| Mean value interval | 1 ... 300 seconds, adjustable | |
| Measuring rate | Max. 50/s | |
| Data logger 3) | ■ Cyclic logger ⇒ Automatic recording of up to 1,000,000 values ■ Cycle time ⇒ Selectable from 1 ... 3,600 s in 1-second steps ⇒ Selectable with the measuring rate in the following steps: 1/s, 3/s, 10/s and 50/s | |
| Battery status display | Symbol display with 4 bars indicates the battery status in 25 %steps. | |
| Case | ||
| Rotatability | The case is rotatable by 330°. | |
| Dimensions | → See dimensions in mm[in], page 10 | |
| Ingress protection | IP65 | |
| Weight | Incl. batteries | Approx. 680 g [1.5 lbs] |
| Display | |||
|---|---|---|---|
| Display range | -199999 ... 199999 digits 5 ½-digit 7-segment display (incl. a large matrix area for auxiliary information) | ||
| Display resolution | 4 ... 5 ½digits; adjustable; depending on the selected pressure unit | ||
| Backlighting | Adjustable via key | ||
| Bar graph | 0 …100 %, 20 individual segments, which show 5 %steps | ||
| Menu languages | Adjustable via menu | ||
| ■ English ■ German ■ Spanish ■ French | ■ Italian ■ Russian ■ Polish | ||
| Pressure units | Adjustable via menu | ||
| ■ mbar ■ bar ■ psi ■ Pa ■ hPa ■ kPa ■ MPa | ■ atm ■ Torr ■ mmHg ■ cmHg ■ inHg ■ inHg (0 °C) ■ inHg (60 °F) | ■ mmH₂O ■ mH₂O ■ inH₂O ■ inH₂O (4 °C) ■ inH₂O (20 °C) ■ inH₂O (60 °F) ■ ftH₂O ■ kg/cm² ■ kp/cm� ■ lbf/ft² ■ kN/m² ■ micron |
| Accuracy 1) 2) | ||
|---|---|---|
| Gauge pressure | ■ 0.025%FS 3) 4) ■ 0.05%FS 3) | 1 ... 1,000 bar [15 ... 15,000 psi] |
| 0.1%FS | 1 ... 2,500 bar [15 ... 50,000 psi] | |
| 0.5%FS | 4,000 ... 10,000 bar [60,000 ... 150,000 psi] | |
| Absolute pressure | ■ 0.025%FS 3) 4) ■ 0.05%FS 3) ■ 0.1%FS | 1 ... 40 bar abs. [15 ... 500 psi abs.] |
| Vacuum and +/- measuring range | ■ 0.025%FS 3) 4) ■ 0.05%FS 3) ■ 0.1%FS | -1 ... 0 bar to -1 ... 40 bar and -0.6 ... +0.6 bar [-14.5 ... 0 psi to -14.5 ... 300 psi, and -8 ...+8 psi] |
| Compensated range | -10 ... 50 °C [14 ... 122 °F] | |
| Reference conditions per IEC 61298-1 5) | ||
| Ambient temperature | 15 ... 25 °C [59 ... 77 °F] | |
| Atmospheric pressure | 860 ... 1,060 mbar [12.5 ... 15.4 psig] | |
| Humidity | < 95 %r.h. (non-condensing) | |
| Mounting position | Vertical mounting position, process connection facing downwards | |
| Calibration | Calibrated at 23 °C [74 °F] and in a vertical mounting position, process connection facing downwards |
| bar | |
|---|---|
| 0 ... 0.1 | 0 ... 200 |
| 0 ... 0.25 | 0 ... 250 |
| 0 ... 0.4 | 0 ... 400 |
| 0 ... 0.6 | 0 ... 600 |
| 0 ... 1 | 0 ... 700 1) |
| 0 ... 1.6 | 0 ... 1,000 1) |
| 0 ... 2.5 | 0 ... 1,600 1) |
| 0 ... 4 | 0 ... 2,500 1) |
| 0 ... 6 | 0 ... 4,000 1) |
| 0 ... 10 | 0 ... 5,000 1) |
| 0 ... 16 | 0 ... 6,000 1) |
| 0 ... 25 | 0 ... 7,000 1) 2) |
| 0 ... 40 | 0 ... 8,000 1) 2) |
| 0 ... 60 | 0 ... 9,000 1) 2) |
| 0 ... 100 | 0 ... 10,000 1) 2) |
| 0 ... 160 | - |
عرض الكل (20)
| 0 ... 0.25 | 0 ... 6 |
|---|---|
| 0 ... 0.4 | 0 ... 7 |
| 0 ... 0.6 | 0 ... 10 |
| 0 ... 1 | 0 ... 16 |
| 0 ... 1.6 | 0 ... 20 |
| 0 ... 2.5 | 0 ... 25 |
| 0 ... 4 | 0 ... 40 |
| bar | |
|---|---|
| -0.25 ... +0.25 | -1 ... 7 |
| -0.4 ... +0.4 | -1 ... 9 |
| -0.6 ... +0.6 | -1 ... 10 |
| -1 ... 0 | -1 ... 15 |
| -1 ... +0.6 | -1 ... 24 |
| -1 ... 1.5 | -1 ... 25 |
| -1 ... 2.5 | -1 ... 39 |
| -1 ... 3 | -1 ... 40 |
| -1 ... 5 | - |
| psi | |
|---|---|
| 0 ... 5 | 0 ... 2,000 |
| 0 ... 10 | 0 ... 3,000 |
| 0 ... 15 | 0 ... 5,000 |
| 0 ... 20 | 0 ... 6,000 |
| 0 ... 30 | 0 ... 8,000 |
| 0 ... 50 | 0 ... 10,000 1) |
| 0 ... 60 | 0 ... 15,000 1) |
| 0 ... 100 | 0 ... 20,000 1) |
| 0 ... 150 | 0 ... 30,000 1) |
| 0 ... 160 | 0 ... 40,000 1) |
| 0 ... 200 | 0 ... 50,000 1) |
| 0 ... 300 | 0 ... 60,000 1) |
| 0 ... 500 | 0 ... 75,000 1) |
| 0 ... 700 | 0 ... 100,000 1) 2) |
| 0 ... 1,000 | 0 ... 150,000 1) 2) |
| 0 ... 1,500 | - |
| 0 ... 3.5 | 0 ... 60 |
|---|---|
| 0 ... 5 | 0 ... 100 |
| 0 ... 10 | 0 ... 150 |
| 0 ... 15 | 0 ... 200 |
| 0 ... 20 | 0 ... 300 |
| 0 ... 30 | 0 ... 500 |
| 0 ... 50 | - |
| psi | |
|---|---|
| -14.5 ... 0 | -8 ...+8 |
| -14.5 ...+15 | -5 ...+5 |
| -14.5 ... 40 | -3 ...+3 |
| -14.5 ... 70 | -8 ... 0 |
| -14.5 ... 100 | -5 ... 0 |
| -14.5 ... 130 | -3 ... 0 |
| -14.5 ... 300 | - |
| Overpressure limit | ||
|---|---|---|
| 3 times | < 25 bar | < 360 psi |
| 2 times | > 25 ...≤ 600 bar | > 360 ...≤ 8,700 psi |
| 1.5 times | > 600 ...≤ 1,600 bar | > 8,700 ...≤ 25,000 psi |
| 1.3 times | > 1,600 ...≤ 6,000 bar | > 25,000 ...≤ 85,000 psi |
| 1.1 times | > 6,000 bar | > 85,000 psi |
| Display | > 110 %FSor -10%FS | |
| Vacuum resistance | Yes |
| Standard | Thread sizes | Possible measuring ranges |
|---|---|---|
| EN 837 | ■ G¼B ■ G½B ■ G⅜B ■ G¼, female thread | ≤ 1,000 bar [≤ 15,000 psi] |
| G½Bflush with O-ring (NBR) | 2.5 ... 600 bar [50 ... 6,000 psi] | |
| G1Bflush with O-ring (NBR) | 0.4 ... 16 bar [10 ... 200 psi] | |
| ANSI/ASME B1.20.1 | ■ ½NPT ■ ¼NPT ■ ½NPT, female thread ■ ¼NPT, female thread ■ ½NPT, male thread | ≤ 1,000 bar [≤ 15,000 psi] |
| DIN 16288 | M20 x 1.5 | ≤ 1,000 bar [≤ 15,000 psi] |
| ISO 7 (DIN 2999) | R½ | ≤ 1,000 bar [≤ 15,000 psi] |
| DIN EN ISO 1179-2 | G½, male thread on G⅛, female thread | ≤ 400 bar [≤ 5,800 psi] |
| - | M16 x 1.5, female thread, with sealing cone | ≥ 100 bar [≥ 1,500 psi] |
| M20 x 1.5, female thread, with sealing cone | 1,600 ... 10.000 bar [30,000 ... 150,000 psi] | |
| 9/16-18 UNF, female thread F 250-C | 100 ... 7,000 bar [1,500 ... 100,000 psi] |
| Process connection adapter 1) | ■ Without ■ G½to¼NPT ■ G½to½NPT | |
|---|---|---|
| Sealing | ■ NBR ■ EPDM | |
| Other versions | ||
| Oil- and grease-free | Per G93:2019 level D (< 220 mg/m²) | |
| Oxygen, oil- and grease-free | ■ Per G93:2019 level D (< 220 mg/m²) ■ Particle < 1,000 μm | |
| Material | ||
| Case | Aluminium die-casting, nickel-plated | |
| Wetted parts | -1 ...< 40 bar [-14.5 ...< 500 psi] | Stainless steel 1.4404 (316L) |
| > 40 bar ...≤ 1,000 bar [> 500 ...≤ 15,000 psi] | ■ Process connection: Stainless steel 1.4404 (316L) ■ Sensor: Elgiloy ® 2.4711 | |
| > 1,000 bar [>15,000 psi] | Stainless steel 1.4534 (904L) | |
| -1 ... 10,000 bar [-14,5 ... 150,000 psi] | ■ Stainless steel 1.4435 (316L) ■ Hastelloy ® 2.4819 (HC276) ■ Gold-plated |
| Internal pressure transmission medium | Synthetic oil | With measuring ranges up to ≤ 25 bar [≤ 360 psi] |
|---|---|---|
| Halocarbon oil | For oxygen version |
| Bluetooth ® 1) | ||
|---|---|---|
| Version | Bluetooth ® Low Energy 4.0 | |
| Bluetooth ® Classic 2.1 | ||
| Frequency range | 2,400 ... 2,500 MHz | |
| HF output power | Max. 2 dBm (+ 2 dBi) | |
| Number of channels | Classic | 79 |
| Low Energy | 40 | |
| Channel spacing | Classic | 1 MHz |
| Low Energy | 2 MHz | |
| Bandwidth | 1 or 2 MHz | |
| Max. transmission power | max. 4 dBm / 2.51mW |
| Battery | 3 x 1.5V AA batteries 1) |
|---|---|
| Battery voltage | DC 4.95V |
| Battery life | Typically 2,000 …2,500 h (without backlighting and with Bluetooth ® not active) |
| Medium temperature range | -10 ...+50 °C [14 ... 122 °F] Lower temperature limit above the freezing point of the medium |
|---|---|
| Operating temperature | -10 ...+50 °C [14 ... 122 °F] |
| Storage temperature range | -20 ...+70 °C [-4 ...+158 °F] |
| Relative humidity, condensation | < 95 %r.h. (non-condensing) |
| Permissible media | All liquids and gases which are compatible with 316 stainless steel |
| Logo | Description | Region |
|---|---|---|
| EU declaration of conformity EMCdirective | European Union | |
| Radio Law Japan Radio approval | Japan | |
| Federal Communications Commission (FCC) for US Radio approval | USA | |
| - | Innovation, Science and Economic Development (ISED) for Canada Radio approval | Canada |
| - | ICASA Radio certification | South Africa |
| Radiocommunications Equipment Rules Radio approval Australia - ABN 49 004 465 936 New Zealand - Company number 400909 | Australia and New | |
| Zealand |
| Logo | Description | Region |
|---|---|---|
| EU declaration of conformity | European Union | |
| ATEX directive Hazardous areas | ||
| Ex i Zone 0 gas Zone 1 Zone 1 gas | II 1G Ex ia IIC T4 Ga connection to zone 0 gas II 1/2G Ex ia IIC T4 Ga/Gb II 2G Ex ia IIC T4 Gb T4 at -10 …+50 °C | |
| IECEx Hazardous areas | International | |
| Ex i Zone 0 gas | Ex ia IIC T4 Ga | |
| Zone 1 gas | Ex ia IIC T4 Gb | |
| Zone 2 | Ex ia IIC T4 Gc | |
| gas |
| Logo | Description | Region | |
|---|---|---|---|
| CSA (only up to 6,000 bar [85,000 psi]) | USA and Canada | ||
| Safety (e.g. electr. safety, overpressure, ...) Class - 3631 06 - Electrical measurement and inspection equipment Class - 3631 86 - Electrical equipment for measurement - certified according to US standards | |||
| Hazardous areas Class - 2258 04 - PROCESS CONTROL EQUIPMENT - Intrinsically-safe, Entity - hazardous area | |||
| Ex i Class Class | Ex ia IIC T4 Ga Groups A, B, C and DT4 T4 at -10 …+50 °C | ||
| Hazardous areas Class - 2258 84 - PROCESS CONTROL EQUIPMENT - Intrinsically-safe, Entity - hazardous area - certified in accordance with US standards | |||
| AEx i Class Class | AEx ia IIC T4 Ga Groups A, B, C and DT4 T4 at -10 …+50 °C | ||
| EAC EMCdirective | Eurasian Economic Community | ||
| Hazardous areas | |||
| - | MChS Permission for commissioning | Kazakhstan | |
| - | PAC Ukraine Metrology, measurement technology | Ukraine | |
| - | CRN Safety (e.g. electr. safety, overpressure, ...) | Canada |
| Certificates | ■ Without ■ 2.2 test report with NACE MR0175 approval 2) ■ 2.2 test report with confirmation of manufactured according to state-of-the-art technology ■ 3.1 inspection certificate with wetted parts approvals incl. chemical analysis ■ 2.2 test report with NACE MR0175 approval together with 3.1 inspection certificate with wetted parts approvals incl. chemical analysis 2) |
|---|---|
| Calibration 1) | ■ 3.1 inspection certificate per DIN EN 10204 ■ DAkkS calibration certificate (traceable and accredited in accordance with ISO/IEC 17025) |
| Recommended calibration interval | 1 year (dependent on conditions of use) |
لم تجد الإجابة في الوثائق؟ سيرد المهندس خلال يوم عمل.
اسأل المهندس →20 مادة قياسية من عائلة CPG
إذا كنت تعرف الرمز — اختر مباشرة. إذا لا — استخدم المُهيِّئ في الوضع «01».

