Управление вязальными машинами SITEX CK

Особенности

• Pattern memory for pattern repeat sizes up to 28 million stitches
• Continued knitting to pattern after power failure
• Interface for real-time actuation of bending transducer modules on all standard machine sizes
• No addressing of bending transducer modules required
• Minimum cabling costs
• Integrated pulse encoder interface
• Digital inputs and outputs for process I/O, e.g. for releases and fault messages, hook actuation
• State-of-the-art control architecture
• Extremely compact dimensions

Область применения

The SITEX CK control system with piezoelectric bending transducer modules for individual needle selection is tailored for use in jacquard circular knitting machines. This unit combines the following functions in a highly compact design:

• Pattern preparation as information for bending transducer actuation
• Process control and visualization, and
• Bending transducer actuation.

Various pattern repeats, which are stored permanently on the controller, are available immediately after a pattern change, with no time-consuming loading from diskette. Functions for continued knitting to pattern after a power failure increase the productivity of machines equipped with SITEX CK, and prevent production rejects. The piezoelectric SITEX bending transducer modules permit low-loss operation on the knitting machine resulting in low heat generation and a long life.

Дизайн

The main features of the compact SITEX CK control unit are:

• Keyboard
• LCD display
• Control board with pattern processor
• Technology board with interface processor
• Hard disk
• Floppy disk

A SITEX S uninterruptible power supply completes the SITEX CK system of control and bending transducer modules. The power supply ensures controlled shut-down of the system in the event of a power failure and continued knitting to pattern on return of power. The bending transducer modules for actuation of the individual needles are described in the node on "SITEX piezo modules".

We can also supply pattern preparation software developed by Messrs. Automation as an add-on for the SITEX CK control system.

Технические данные

Заказные данные

Аксессуары