What it means
F36836 carries the manual title Hub DRIVE-CLiQ: Send error for DRIVE-CLiQ data
. The drive raises it when a DRIVE-CLiQ communications error occurs from the Control Unit to the DRIVE-CLiQ Hub Module involved: the data could not be sent. The manual identifies the fault cause as 65 (= 41 hex) — the telegram type does not match the send list. The G130/G150 and S120/S150 manuals describe this fault identically.
Why it appears
- A DRIVE-CLiQ communications error occurred from the Control Unit to the DRIVE-CLiQ Hub Module involved, and the data were not able to be sent.
- Fault cause 65 (= 41 hex): the telegram type does not match the send list.
What to check
- Read the message value in r0949: it is coded 0000yyxx hex, where yy identifies the component and xx the error cause — for this fault xx = 65 (= 41 hex), telegram type does not match send list.
- Carry out a POWER ON; this is the only remedy the manual gives for F36836.
Reading the message value
- The message value is stored with two placeholders: %1 is the component number, %2 the fault cause.
- The individual information is coded in the message value (r0949/r2124) as follows: 0000yyxx hex — yy = component number, xx = error cause.
- Error cause 65 (= 41 hex) means: telegram type does not match send list.
Parameters the manual names
- r0949 (fault value) — read the coded message value of F36836 here: 0000yyxx hex, with the component number in yy and the error cause 65 (= 41 hex) in xx.
- r2124 (alarm value) — named by the manual alongside r0949 as the other register in which the same 0000yyxx hex coding of the message value can be read.
Acknowledging and restarting
The fault can be acknowledged immediately. For clearing, the manual gives one remedy: Carry out a POWER ON.
The same on every family
Every manual that describes F36836 gives it the same reaction, acknowledgement and message class.
| Drive family | Reaction | Acknowledge | Message class | Component | Manual |
|---|---|---|---|---|---|
| S120, S150 | NONE | IMMEDIATELY | Internal (DRIVE-CLiQ) communication error (12) | Terminal Board (TB) | SINAMICS S120, S150 List Manual · p. 3254 |
| G130, G150 | NONE | IMMEDIATELY | Internal (DRIVE-CLiQ) communication error (12) | Terminal Board (TB) | SINAMICS G130, G150 List Manual · p. 1915 |
The drives this code lives on
F36836 is described for G130, G150, S120, S150. These are the converters of those families in our catalogue — price on request.
Questions technicians ask
What does SINAMICS fault F36836 mean?
It is a Hub DRIVE-CLiQ send error: a DRIVE-CLiQ communications error occurred from the Control Unit to the DRIVE-CLiQ Hub Module involved, and the data were not able to be sent. The fault cause is 65 (= 41 hex) — the telegram type does not match the send list.
How do I clear fault F36836?
The manual's only remedy is to carry out a POWER ON. The fault belongs to the immediately acknowledged class, so acknowledge it and perform the POWER ON.
What is stored in the fault value of F36836?
The message value in r0949/r2124 is coded 0000yyxx hex: yy is the component number and xx the error cause. For this fault the error cause is 65 (= 41 hex), meaning the telegram type does not match the send list.
Codes next to this one
Source
Written from Siemens' own List Manuals and operating instructions; every number, designation and parameter on this page is checked against them before publication.
All SINAMICS codes: fault and alarm codes · the F36xxx group · SINAMICS manuals · Siemens manuals