UPT-20

בהזמנה

WIKA · מדידת לחץ · משפחה UPT

משדר לתהליך

Name: משדר לתהליך
Brand: WIKA
SKU: UPT

עם חיבור לחץ או דיאפרגמה צפה

טווח

-1…4000 bar

יציאה

4-20 mA · 4-20 mA with HART

דיוק

0.15 % of span

הגנה

IP65

CEEACRoHSREACHNACEATEXIECExFMCSA

מחיר

לפי דרישה

תלוי בתצורה

לבקש הצעת מחיר

+38 (067) 285-77-70·info@avigan.com.uaViberTelegram

תיאור

משדר התהליך UPT-2x של WIKA הוא חיישן חכם למדידת לחץ עם פרוטוקול HART, הזמין עם חיבור לחץ או עם דיאפרגמה צפה. הוא מתאים ליישומים הדורשים חיישן אינטליגנטי, במיוחד בתעשיות הכימית, הפרמצבטית וההיגיינית. טווחי הלחץ משתרעים מ-0 … 1.6 bar ועד 0 … 4000 bar (ועד 60000 psi), עם דיוק של 0.15 % of span.

תכונות מיוחדות

תצוגה רב-תפקודית
ניווט בתפריט פשוט
תיבת פלסטיק מוליך או תיבת פלדת אל-חלד (באופן אופציונלי עם משטח מלוטש אלקטרוליטית)
תצוגת LC גדולה, מסתובבת
אישורים לאזורים מסוכנים

שאלות ותשובות

מהו טווח המדידה של ה-UPT-20?

הטווחים נעים מ-0 … 1.6 bar ועד 0 … 4000 bar, וביחידות psi מ-0 … 10 psi ועד 0 … 60000 psi. קיימים גם טווחי ואקום ויחסיים, למשל ‎-1 … 0 bar ו‎-14.5 … 300 psi.

מהי הדיוק של המשדר?

הדיוק הוא 0.15 % of span, לפי התקן IEC 61298-2.

אילו חיבורי תהליך זמינים?

G 1/2 B, G 1 B, G 1 1/2 B, 1/2 NPT, 1 NPT ו-1 1/2 NPT.

מהם חומרי החלקים במגע עם התווך?

Stainless steel 316L או Elgiloy, עם אטימה מ-FKM, EPDM, FPM או Metal.

מהן טמפרטורות ההפעלה?

טמפרטורת הסביבה: ‎-40 … +85 °C; טמפרטורת התווך: ‎-40 … +150 °C.

האם המשדר מאושר לאזורים מסוכנים?

כן — ישנם אישורי ATEX, IECEx, FM ו-CSA, בנוסף להסמכות CE, EAC, RoHS, REACH ו-NACE.

מה מבדיל את ה-UPT-21 מה-UPT-20?

הדגם UPT-2x זמין עם חיבור לחץ או עם דיאפרגמה צפה; הדיאפרגמה הצפה מתאימה במיוחד לתעשיות היגייניות ופרמצבטיות. פרטי ההבדל המדויקים בין UPT-20 ל-UPT-21 אינם מפורטים בנתונים שסופקו.

מהו אות הפלט ואספקת החשמל?

אות הפלט הוא 4-20 mA או 4-20 mA עם HART, עם אספקת חשמל של 10...30 V DC.

תצורה · צעד אחר צעד

הרכיבו UPT לפי המשימה

המק״ט נבנה אוטומטית. בספק — פנו למהנדס; נסייע לפי פרמטרי הקו.

שלב 1 מתוך 1

מבנה התצורה· לחצו על מקטע מודגש כדי לעבור לפרמטר התואם

G 1/2 B1/2 NPTM20 x 1.5G 3/8 BG 1/4 B1/2 NPT female1/4 NPT

התצורה שלכם

Process connection typeStandard connection with pressure port
Electrical approvalWithout
Ignition protection typeWithout
ZoneWithout
Case designplastic version, IP66/IP67
Digital Displaywith integrated 4 1/2 digit LCD-display
Output signal4 ... 20 mA, 2-wire
Electrical connectionM20x1,5 / cable gland PA black (ø6-12mm)
Unitbar
Pressure typegauge
Measuring range0 ... 0.4 bar gauge
Process connection—
Sealingwithout
Wetted partsstainless steel
Accuracy0.15% of span
Special design featureswithout
Certificates/Approvalswithout
Additional ordering informationWithout

AI ייעץ לפי פרמטרים

סיימו את התצורה

בחרו את כל האפשרויות כדי לשלוח בקשה.

שלחו בקשה

התצורה שלכם

Process connection typeStandard connection with pressure port
Electrical approvalWithout
Ignition protection typeWithout
ZoneWithout
Case designplastic version, IP66/IP67
Digital Displaywith integrated 4 1/2 digit LCD-display
Output signal4 ... 20 mA, 2-wire
Electrical connectionM20x1,5 / cable gland PA black (ø6-12mm)
Unitbar
Pressure typegauge
Measuring range0 ... 0.4 bar gauge
Process connection—
Sealingwithout
Wetted partsstainless steel
Accuracy0.15% of span
Special design featureswithout
Certificates/Approvalswithout
Additional ordering informationWithout

שלחו בקשה

זיהוי

דגם	UPT-20
סדרה	UPT
תת-קטגוריה	Process transmitter

טווח מדידה

טווח לחץ

0…1.6 bar · 0…6 bar · 0…16 bar · 0…40 bar · 0…0.4 bar · 0…100 bar · 0…250 bar · 0…600 bar · 0…1000 bar · 0…1600 bar · 0…2500 bar · 0…4000 bar · 0…10 psi · 0…15 psi · 0…30 psi · 0…100 psi · 0…300 psi · 0…500 psi · 0…1500 psi · 0…5000 psi · 0…10000 psi · 0…15000 psi · 0…30000 psi · 0…50000 psi · 0…60000 psi · -1…0 bar · -0.2…0.2 bar · -1…0.6 bar · -1…5 bar · -1…15 bar · -1…40 bar · -14.5…0 psi · -14.5…15 psi · -14.5…100 psi · -14.5…300 psi · -14.5…600 psi

דיוק מדידה

מחלקת דיוק	0.15 % of span
תקן דיוק	IEC 61298-2

תנאי תהליך

חיבור תהליך	G 1/2 BG 1 BG 1 1/2 B1/2 NPT1 NPT1 1/2 NPT
טמפ׳ תהליך	−40…+150 °C

מאפיינים חשמליים

אות יציאה	4-20 mA · 4-20 mA with HART
הזנה	10...30 V DC
חיבור חשמלי	M12 4-pin, cable gland, terminal block

חומרים

חומר מארז	Conductive plastic, Stainless steel 316L
חומר חלקים רטובים	Stainless steel 316L, Elgiloy
חומר אטם	FKM, EPDM, FPM, Metal

סביבת הפעלה

טמפ׳ סביבה	−40…+85 °C
דרגת הגנה IP	IP65
משקל	1.2 kg

תקנים ואישורים

תקנים	CEEACRoHSREACHNACE
הגנת התפוצצות	ATEXIECExFMCSA

פרטים נוספים

שפות גיליון נתונים

EN, DE

טבלאות מגיליון הנתונים

Gauge pressure

bar	0 ... 0.4	0 ... 1.6	0 ... 6	0 ... 16	0 ... 40	0 ... 100
	0 ... 250	0 ... 600	0 ... 1,000	0 ... 1,600	0 ... 2,500	0 ... 4,000
psi	0 ... 10	0 ... 15	0 ... 30	0 ... 100	0 ... 300	0 ... 500
	0 ... 1,500	0 .... 5,000	0 ... 10,000	0 ... 15,000	0 ... 30,000	0 ... 50,000
	0 ... 60,000
Absolute pressure
bar	0 ... 1.6	0 ... 6	0 ... 16	0 ... 40
psi	0 ... 30	0 ... 100	0 ... 300	0 ... 500
Vacuum and +/- measuring ranges
bar	-1 ... 0	-0.2 ... +0.2	-1 ... +0.6	-1 ...+5	-1 ...+15	-1 ...+40
psi	-14.5 ... 0	-14.5 ...+15	-14.5 ...+100	-14.5 ...+300	-14.5 ...+600

Vacuum/overload safety

Vacuum safety	Yes (not for oxygen applications)
Overload safety (standard version, version with cooling element)
Measuring range ≤ 40 bar [500 psi]	3 times
Measuring range 40 ... 1,000 bar [500 .... 15,000 psi]	2 times
Measuring range 1,600 bar [30,000 psi]	1.5 times
Measuring range 2,500 bar [50,000 psi]	1.4 times
Measuring range 4,000 bar [60,000 psi]	1.25 times

Output signals

Signal types	■ 4 ...20mA ■ 4 ... 20 mAwith HART ® signal (option)
Load in Ω	■ ≤ U + - 12V / 0.023 A (non-Ex) ■ ≤ U + - 14V / 0.023 A (Ex)
	U + = Applied supply voltage (→ see 'Supply voltage')
Dampening	0 ... 99.9 s, adjustable
	After the set dampening time the instrument outputs 63 %of the applied pressure as output signal.
Settling time t 90
Without HART ®	60 ms
With HART ®	80 ms
Refresh rate
Without HART ®	20 ms
With HART ®	50 ms

Accuracy specifications

Accuracy at reference conditions 1)	■ 0.15 %of span ■ 0.1 %of span (option 1) ■ 0.2 %of span (option 2) ■ 0.5 %of span (> 1,000 bar [15,000 psi]) (option 3)
Adjustability
Zero point	-20 ...+95 %(downwards, the adjustability is always limited by the minimum pressure of 0 bar abs. [0 psia])
Span	Measuring range ≤ 1,000 bar [15,000 psi]	-120 ...+120 %with a difference between zero point and span of max. 120 %of the nominal measuring range
Measuring range > 1,000 bar [15,000 psi]	Max. (0 bar abs. [0 psia]) ...+105 %(down- wards, the adjustability is always limited by the minimum pressure of 0 bar abs. [0 psia])
Turndown ratio	Unlimited
Measuring range ≤ 1,000 bar [15,000 psi] Measuring range > 1,000 bar [15,000 psi]	Maximum recommended turndown 20:1 Maximum recommended turndown 2:1
Mounting correction	-20 ...+20%
Non-repeatability
Measuring ranges ≤ 1,000 bar [15,000 psi]	≤ 0.1 %of span
Measuring ranges > 1,000 bar [15,000 psi]	≤ 0.5 %of span
Behaviour with turndown 2)
Measuring ranges from 0 ...1.6 bar to 0 ... 1,000 bar [0 ...25 psi to 0 ... 15,000 psi]	TD ≤ 5:1 TD > 5:1 ...≤ 100:1	No influence on the accuracy
Measuring range < 1.6 bar [30 psi]	TD = 1:1 TD > 1:1 ...≤ 100:1	No influence on the accuracy	4) / 5
Measuring range >1,000 bar [15,000 psi]	≤ 0.5 xTD
Long-term stability
Measuring range < 1 bar [14.5 psi]	0.35 %/year
Measuring range ≥ 1 bar [14.5 psi]	0.15 %/year
Measuring range ≥ 1.6 bar [30 psi]	0.1 %/year
Measuring range ≥ 40 bar [600 psi]	0.1 %/year
range > 1,000 bar [15,000 psi]	≤ 0.5 %/year	Measuring
Thermal change, zero point / span (reference temperature 20 °C [68 °F])
In the temperature-compensated range 10 ... 70 °C [50 ... 158 °F]	No additional temperature error (only applies to measuring range up to 1,000 bar [15,000 psi])
Outside compensated range	Typical < 0.1 %/10 K (for >1,000 bar [15,000 psi]: 0.2 %/10 K)
Thermal change of the current output (reference temperature 20 °C [68 °F])
< 18 °C and > 28 °C [< 64 °F and > 82 °F]	0.1 %/10 K (max. 0.15 %/10 K)

הצגת הכול (20)

Reference conditions (per IEC 61298-1)

Temperature	23 °C ±2 °C [73 °F ±7 °F]
Supply voltage	DC 23 ...25V
Air pressure	860 ... 1,060 mbar [86 ... 106 kPa, 12.5 ... 15.4 psi]
Air humidity	45 ... 75 %r.h.
Characteristic curve determination	Terminal method per IEC 61298-2
Curve characteristics	Linear
Reference mounting position	Vertical, diaphragm points downward

Voltage supply

Voltage supply (non-Ex)
Supply voltage U +	DC 12 ...36V
Voltage supply (Ex)
Supply voltage U +	DC 14 ...30V
Maximum voltage U i	DC 30V
Maximum current I i	100mA
Maximum power P i (gas)	1,000mW
Maximum power P i (dust)	750/650/550 mW(depending on the max. ambient temperature)
Effective internal capacitance	11 nF
Effective internal inductance	100 μH

Per standard	Thread size	Possible measuring ranges
EN 837	G⅜B	≤ 0 ... 1,000 bar [0 ... 15,000 psi]
	G½B	≤ 0 ... 1,000 bar [0 ... 15,000 psi]
	M20 x 1.5	≤ 0 ... 1,000 bar [0 ... 15,000 psi]
ANSI / ASME B1.20.1	½NPT	≤ 0 ... 1,000 bar [0 ... 15,000 psi]
	½NPT, female	≤ 0 ... 1,000 bar [0 ... 15,000 psi]
	¼NPT	≤ 0 ... 1,000 bar [0 ... 15,000 psi]
-	M16 x 1.5 mmfemale with sealing cone	≥ 0 ... 100 bar [0 ... 1,500 psi]
	M20 x 1.5 mmfemale with sealing cone	≥ 0 ... 1,600 bar [0 ... 23,200 psi]
	9/16-18 UNF female F 250-C	≥ 0 ... 100 bar [0 ... 1,500 psi]
	1 1/8 -12 UNF female F 562-C	≥ 0 ... 100 bar [0 ... 1,500 psi]

Per standard	Thread size	Possible measuring ranges
-	G½B	0 ...6 to 0 ...600 bar [0 ...100 to 0 ... 5,000 psi]
G1B	≤ 0 ... 1.6 bar [0 ... 30 psi]
G1½B	≤ 0 ... 1.6 bar [0 ... 30 psi]
G1hygienic 1) 2)	≤ 0 ... 16 bar [0 ... 100 psi]
G1hygienic with cooling element 2)	≤ 0 ... 16 bar [0 ... 100 psi]
M44 x 1.25 with union nut	≤ 0 ... 40 bar [0 ... 500 psi]
TRI-CLAMP ®	DN 1½ with cooling element for 150 °C [302 °F]	≤ 0 ... 40 bar [0 ... 500 psi] 4)
DN 2 with cooling element for 150 °C [302 °F]	≤ 0 ... 40 bar [0 ... 500 psi] 4)
Clamp DIN 32676	DN 40 with cooling element for 150 °C [302 °F]	≤ 0 ... 40 bar [0 ... 500 psi] 4)
DN 50 with cooling element for 150 °C [302 °F]	≤ 0 ... 40 bar [0 ... 500 psi] 4)
Grooved union nut DIN 11851 with conical coupling 3)	DN 25 with cooling element for 150 °C [302 °F]	≤ 0 ... 40 bar [0 ... 500 psi]
DN 50 with cooling element for 150 °C [302 °F]	≤ 0 ... 25 bar [0 ... 500 psi]
NEUMO BioConnect ®	DN 40 formV with cooling element for 150 °C [302 °F]	≤ 0 ... 16 bar [0 ... 500 psi]
VARINLINE ®	Form N with cooling element for 150 °C [302 °F] DN 40 ... 50	≤ 0 ... 16 bar [0 ... 500 psi]
Form F with cooling element for 150 °C [302 °F] DN 25	≤ 0 ... 16 bar [0 ... 500 psi]

Model	Medium
Model UPT-20	Measuring range ≤ 40 bar [500 psi]: Synthetic oil (halocarbon oil for oxygen applications) Measuring range > 40 bar [500 psi]: Dry measuring cell
Model UPT-21	Synthetic oil

Model	Measuring ranges	Process connections	Materials
Materials (wetted)
UPT-20	≤ 40 bar [500 psi]	All	Standard	Process connection: Stainless steel 1.4404 / 316L Sensor: Stainless steel 1.4404 / 316L
> 40 bar [500 psi]	All	Standard	Process connection: Stainless steel 1.4404 / 316L Sensor: Elgiloy ® 2.4711
> 1,000 bar [15,000 psi]	All	Standard	Process connection: Stainless steel 1.4534 / 904L Sensor: Stainless steel 1.4534 / 904L
UPT-21	All	All	Standard	Process connection: Stainless steel 1.4435 / 316L Diaphragm: Stainless steel 1.4435 / 316L
■ G½ ■ G1	Option 1	Process connection: Hastelloy ® HC276 / 2.4819 Diaphragm: Hastelloy HC276 / 2.4819
■ G½ ■ G1	Option 2	Process connection: Gold-plated Diaphragm: Gold-plated 1)

Case

Option 1	Plastic (PBT) with conductive surface per EN 60079-0:2012 Colour: Night blue RAL5022
Option 2	Stainless steel case 1.4308 (CF-8), precision cast (suitable for chemical and petrochemical industries)
Option 3	Stainless steel case 1.4308 (CF-8) with electropolished surface (suitable for pharmaceutical, food and hygienic industries)
Option 4 1)	Stainless steel case coated with epoxy resin
Option 5 1)	Stainless steel case, electropolished and coated with epoxy resin

Electrical connection

Spring-loaded terminals	Wire cross-section: Wire or strand: 0.2 ... 2.5 mm² (AWG 24 ... 14) Strand with end splice: 0.2 ... 1.5 mm² (AWG 24 ... 16)
Cable glands M20 x 1.5
Plastic, PA	Sealing	NBR
Cable diameter	6 ... 12 mm[0.24 ... 0.47 in]
Ingress protection per IEC 60529	IP66/67
Brass, nickel-plated	Sealing	NBR
Cable diameter	5 ... 9 mm[0.2 ... 0.35 in]
Ingress protection per IEC 60529	IP66/67
Stainless steel cable gland	Sealing	NBR
Cable diameter	7 ... 12 mm[0.28 ... 0.47 in]
Ingress protection per IEC 60529	IP66/67
Stainless steel cable gland in hygienic design	Sealing	FDA-compliant
Cable diameter	6 ... 12 mm[0.24 ... 0.47 in]
Ingress protection per IEC 60529	IP66/67
Angular connector DIN 175301-803A with mating connector	Wire cross-section	Max.1.5mm 2 (AWG 16)
Ingress protection per IEC 60529	IP65 1)
Circular connector M12 x 1 (4-pin) without mating connector	Ingress protection per IEC 60529	IP65 1)
Electrical safety	Reverse polarity protection

Display and operating unit, model DI-PT-U (option)

Display type	LC display 1)
Refresh rate	200 ms
Main display	4 ½-digit
Segment display	Character size 14 mm[0.55 in]
Additional display	Selectable via menu, three-line scale range
Bar graph display	20 segments, radial, pressure gauge simulation
Adjustable units
Pressure units	■ bar ■ psi ■ mbar ■ MPa ■ kPa ■ hPa ■ Pa ■ mH₂O ■ ftH₂O ■ inH₂O ■ mHg ■ mmHg ■ inHg ■ kg/cm 2 ■ g/cm 2 ■ Torr
Level units	■ m ■ cm ■ mm ■ ft ■ in
Volume units	■ l ■ m 3 ■ gal ■ inch 3 ■ ft 3 ■ %
Free unit	A free character string (6 characters) can be defined as a unit
Operating state	Display via symbols
Operating temperature	By using the display and operating unit, the operating temperature is limited to -20 ...+60 °C [-4 ...+140 °F]
Storage temperature	-40 ...+80 °C [-40 ...+176 °F]
Operation	4 buttons for the recall and operation of the settings
Colours
Background	Light grey
Digits	Black
Upgradable	Yes (→ see 'Accessories')
Display size	Separated into main and segment displays
Ingress protection per IEC 60529	■ IP20 (loose) ■ IP40 (built-in without cover)
Material	Case from ABS, window from polyester film

Operating conditions

Range of applications	Suitable for internal and external operation, exposure to direct sunlight is permitted
Permissible air humidity	≤ 93 %r.h.
Permissible temperature ranges
Ambient	■ -20 ...+60 °C [-4 ...+140 °F] (with digital display) ■ -40 ...+80 °C [-40 ...+176 °F] 1) (without digital display)