צמד תרמי עם חיבור אוגן
תיאור
צמדים תרמיים מסדרה זו מיועדים להתקנה בתוך מכלים ובצנרת. זמינות אוגנים סטנדרטיים לפי DIN EN או ASME.
חיישני טמפרטורה אלה מתאימים למדיות נוזליות וגזיות תחת עומס מכני מתון. צינור ההגנה מרותך כולו ומוברג לתוך ראש החיבור. צינורות הגנה מפלדת אל-חלד מתאימים לתנאים כימיים רגילים. מומלץ לצפות בציפוי כאפשרות נוספת עבור מדיות אגרסיביות כימית, או בציפוי מוצק עמיד בפני שחיקה עבור מדיות שוחקות.
האלמנט המדידה להחלפה ניתן להסרה מבלי להוציא את החיישן כולו מהמתקן. הדבר מאפשר בדיקה, ניטור ציוד מדידה, או בעת ביצוע עבודות תחזוקה — החלפה בזמן שהמתקן ממשיך לפעול. בחירת אורכים סטנדרטיים מסייעת בזמני אספקה קצרים ובאפשרות להחזיק חלקי חילוף במלאי.
תכונות מיוחדות
- טווחי החיישן מ--40 ... +1,200 °C [-40 ... +2,192 °F]
- עם צינור הגנה מובנה מיוצר
- תא מדידה טעון קפיץ (ניתן להחלפה)
- גרסאות מוגנות מפני פיצוץ זמינות לסוגי אישורים רבים (ראו דף 2 בדף הנתונים)
שאלות ותשובות
מהו טווח המדידה של ה-TC10-F?
טווחי החיישן הם מ--40 ... +1,200 °C, בהתאם לסוג הצמד התרמי שנבחר.
אילו סוגי צמדים תרמיים זמינים?
סוגי חיישנים K, J, E, N ו-T, במחלקות Class 1 ו-Class 2.
אילו אוגני תהליך נתמכים?
אוגנים סטנדרטיים לפי DIN EN או ASME.
מהם חומרי צינור ההגנה?
Stainless steel, Monel 400, Hastelloy C276, Hastelloy C4, Titanium ו-Tantalum — לבחירה בהתאם למדיום התהליך.
האם יש גרסאות מוגנות מפני פיצוץ?
כן, קיימות גרסאות Ex לפי ATEX, IECEx, EAC, INMETRO, CCC, KCs-KOSHA ו-PESO, למשל II 1G Ex ia IIC T1 ... T6 Ga לאזור 0.
מה מבדיל את ה-TC10-F מדגמים אחרים?
האלמנט המדידה בעל טעינת הקפיץ ניתן להחלפה ללא הוצאת החיישן כולו מהמתקן, כך שניתן לבדוק או להחליף אותו בזמן שהמתקן ממשיך לפעול.
מהו אות הפלט?
4-20 mA עם משדר אופציונלי, כולל תמיכה ב-HART.
מהו דירוג ההגנה מפני חדירה?
IP65.
הרכיבו TC10-F לפי המשימה
המק״ט נבנה אוטומטית. בספק — פנו למהנדס; נסייע לפי פרמטרי הקו.
- אישור חשמליWithout
- סוג הגנת הצתהWithout
- אזורWithout
- סוג תרמוצמדType K
- מספר צמדי תרמו-אלמנטSingle thermocouple
- מחלקת דיוק של החיישןClass 2, IEC 60584
- גבולות תוקף של דיוק מחלקה-40…+1200 °C
- צומת חםUngrounded
- ראש / ביתBSZ, Aluminum, ball shaped, flip-top
- כניסת כבלStandard cable gland for für A-/B-/J- heads
- גודל הברגה כניסת כבלM20 x 1.5
- משדרWithout (terminal block)
- פרטי משדרWithout
- חיבור לצינור הצווארM24 x 1,5
- צינור הגנהStraight, flange, form 2F DIN 43772
- חומר צינור הגנהStainless steel 1.4571
- קוטר צינור ההגנה9x1 mm
- גודל אוגןEN 1092-1 DN 25
- דירוג לחץ—
- פני אוגן—
- אורך הכנסה [A]—
- אורך צוואר [MH/N]65
- דרישות מכניותWithout
- תעודותWithout
סיימו את התצורה
בחרו את כל האפשרויות כדי לשלוח בקשה.
| דגם | TC10-F |
| סדרה | TC10 |
| תת-קטגוריה | Flanged thermocouple with protection tube |
| טווח טמפרטורה | −40…+1200 °C · −40…+1000 °C · −40…+750 °C · −40…+900 °C · −40…+350 °C |
| רמת בטיחות תפקודית (SIL) | SIL 2 |
| חיבור תהליך | DIN EN flangesASME flangesDIN EN flangeASME flangeDIN ENASME |
| טמפ׳ תהליך | −40…+1200 °C |
| אות יציאה | 4-20mA · HART · 4-20 mA (with optional transmitter) |
| חיבור חשמלי | M20 x 1.5 or ½ NPT |
| חומר גשש | Ni alloy 600, Alloy 600 |
| חומר תרמופור | Stainless steel, Monel 400, Hastelloy C276, Hastelloy C4, Titanium, Tantalum, 2.4360 (Monel 400), 2.4819 (Hastelloy C276), 2.4610 (Hastelloy C4), 3.7035 (titanium grade 2) |
| טמפ׳ סביבה | −40…+80 °C |
| דרגת הגנה IP | IP65 |
| תקנים | RoHSGOSTKazInMetrMTSCHSBelGIMUkrSEPROUzstandardNAMUREMCNAMUR NE 024CEATEXIECExEACEx UkraineINMETROCCCKCs-KOSHAPESO |
| הגנת התפוצצות | Ex ia IIIC T125 ... T65 °C DaEx ia IIIC T125 ... T65 °C Da/DbII 1G Ex ia IIC T1 ... T6 GaII 1/2G Ex ia IIC T1 ... T6 Ga/GbII 2G Ex ia IIC T1 ... T6 GbII 1D Ex ia IIIC T125 ... T65 °C DaII 1/2D Ex ia IIIC T125 ... T65 °C Da/DbII 2D Ex ia IIIC T125 ... T65 °C DbII 2G Ex eb IIC T1 ... T6 GbII 3G Ex ec IIC T1 ... T6 Gc XII 2D Ex tb IIIC TX °C DbII 3D Ex tc IIIC TX °C Dc XII 3G Ex nA IIC T1 ... T6 Gc XEx ia IIC T1 ... T6 GaEx ia IIC T1 ... T6 Ga/GbEx ia IIC T1 ... T6 GbEx ia IIIC T125 ... T65 °C Db0Ex ia IIC T6 ... T1 Ga X1Ex ia IIC T6 ... T1 Gb XEx ia IIIC T80…T440 °C Da XEx ia IIIC T80…T440 °C Db X2Ex nA IIC T6 ... T1 Gc XEx ia IIC T3 ... T6 GaEx ia IIC T3 ... T6 Ga/GbEx iaD 20 T65/T95/T125°CEx iaD 21 T65/T95/T125°CEx iaD 20/21 T65/T95/T125°CEx nA IIC T1 ~ T6 GcEx ia IIC T4 ... T6Ex ib IIC T4 ... T6ATEX Ex i Zone 0,1,2ATEX Ex e Zone 1,2ATEX Ex nA Zone 2ATEX Ex ia IIIC T125...T65 °C DbIECEx (in conjunction with ATEX)EAC Ex i Zone 0 gas 0Ex ia IIC T6...T1 Ga XEAC Ex n Zone 2 gas 2Ex nA IIC T6...T1 Gc XEx Ukraine Ex i Zone 0 gas II 1G Ex ia IIC T1...T6 GaINMETRO Ex i Zone 0 gas Ex ia IIC T3...T6 GaINMETRO Ex ia IIC T3...T6 Ga/GbINMETRO Ex ia IIIC T125...T65 °C Da/DbCCC Ex i Zone 0 gas Ex ia IIC T1~T6 GaCCC Ex ia IIC T1~T6 GbCCC Ex ia IIC T1~T6 Ga/GbCCC Ex ic IIC T1~T6 GcCCC Ex iaD 20 T65/T95/T125°CCCC Ex iaD 21 T65/T95/T125°CKCs - KOSHA Ex i Zone 0 gas Ex ia IIC T4...T6KCs - KOSHA Ex ib IIC T4...T6PESO Ex i Zone 0 gas Ex ia IIC T1...T6 GaPESO Ex ia IIC T1...T6 Ga/GbPESO Ex ia IIC T1...T6 GbGOSTKazInMetrMTSCHSBelGIMUkrSEPROUzstandardEx eb IIC T1...T6 GbEx ec IIC T1...T6 Gc XEx tb IIIC TX °C DbEx tc IIIC TX °C Dc XEx nA IIC T6...T1 Gc X |
| סוג חיישן | Type K/J/E/N/T |
| מחלקת חיישן | Class 1, Class 2 |
| קוטר גשש | 3 mm |
| תרמופור | כן |
| צורת תרמופור | 2F/3F |
| שפות גיליון נתונים | EN |
| Logo | Description | Country |
|---|---|---|
| EU declaration of conformity ■ EMCdirective 1) | European Union | |
| ■ RoHS directive ■ ATEX directive Hazardous areas - Ex i Zone Zone Zone Zone Zone Zone - Ex e 2) Zone Zone Zone Zone - Ex n 2) Zone Zone IECEx (option) - in conjunction with ATEX Hazardous areas | International | |
| Zone 21 dust Ex ia IIIC T125 ...T65 °C Db EAC (option) Hazardous areas - Ex i Zone 0 gas 0Ex ia IIC T6 ...T1 Ga X | Eurasian Economic Community | |
| - Ex n Zone 2 gas 2Ex nA IIC T6 ...T1 Gc X Ex Ukraine (option) Hazardous areas - Ex i Zone 0 gas II 1G Ex ia IIC T1 ...T6 Ga | Ukraine |
| Logo | Description | Country |
|---|---|---|
| INMETRO (option) Hazardous areas - Ex i Zone 0 gas Ex ia IIC T3 ...T6 Ga Zone 1 mounting to zone 0 gas Ex ia IIC T3 ...T6 Ga/Gb | Brazil | |
| Zone 21 mounting to zone 20 dust Ex ia IIIC T125 ...T65 °C Da/Db CCC (option) 4) Hazardous areas - Ex i Zone 0 gas Ex ia IIC T1 ~ T6 Ga Zone 1 gas Ex ia IIC T1 ~ T6 Gb Zone 1 mounting to zone 0 gas Ex ia IIC T1 ~ T6 Ga/Gb Zone 2 gas Ex ic IIC T1 ~ T6 Gc Zone 20 dust Ex iaD 20 T65/T95/T125°C Zone 21 dust Ex iaD 21 T65/T95/T125°C | China | |
| KCs - KOSHA (option) Hazardous areas Ex i Zone 0 gas Ex ia IIC T4 ...T6 Zone 1 gas Ex ib IIC T4 ...T6 | South Korea | |
| - | PESO (option) Hazardous areas - Ex i Zone 0 gas Ex ia IIC T1 ...T6 Ga Zone 1 mounting to zone 0 gas Ex ia IIC T1 ...T6 Ga/Gb Zone 1 gas Ex ia IIC T1 ...T6 Gb | India |
| GOST (option) Metrology, measurement technology | Russia | |
| KazInMetr (option) Metrology, measurement technology | Kazakhstan | |
| - | MTSCHS (option) Permission for commissioning | Kazakhstan |
| BelGIM (option) Metrology, measurement technology | Belarus | |
| UkrSEPRO (option) Metrology, measurement technology | Ukraine | |
| Uzstandard (option) Metrology, measurement technology | Uzbekistan |
| Logo | Description |
|---|---|
| SIL IEC 61508 / IEC 6151 | SIL 2 Functional safety (only in conjunction with model T32 temperature transmitter) |
| NAMUR | NAMUR NE 024 Hazardous areas (Ex i) |
| Type | Validity limits of class accuracy | ||
|---|---|---|---|
| IEC 60584-1 | ASTM E230 | ||
| Class 2 | Class 1 | Standard Special | |
| K | -40 ... +1,200 °C | -40 ... +1,000 °C | 0 ... 1,260 °C |
| J | -40 ...+750 °C | -40 ...+750 °C | 0 ... 760 °C |
| E | -40 ...+900 °C | -40 ...+800 °C | 0 ... 870 °C |
| N | -40 ... +1,200 °C | -40 ... +1,000 °C | 0 ... 1,260 °C |
| T | -40 ...+350 °C | 0 ... 370 °C |
הצגת הכול (20)
| Model | Material | Cable entry thread size | Ingress protection (max.) 1) IEC/EN 60529 | Cap | Surface | Connection to neck tube |
|---|---|---|---|---|---|---|
| BS | Aluminium | M20 x 1.5 or½NPT 3) | IP65 4) | Flat cap with 2 screws | Blue, painted 5) | M24 x 1.5,½NPT |
| BSZ | Aluminium | M20 x 1.5 or½NPT 3) | IP65 4) | Spherical hinged cover with cylinder head screw | Blue, painted 5) | M24 x 1.5,½NPT |
| BSZ-H | Aluminium | M20 x 1.5 or½NPT 3) | IP65 4) | Raised hinged cover with cylinder head screw | Blue, painted 5) | M24 x 1.5,½NPT |
| BSZ-H (2x cable outlet) | Aluminium | 2 x M20 x 1.5 or 2x½NPT 3) | IP65 4) | Raised hinged cover with cylinder head screw | Blue, painted 5) | M24 x 1.5 |
| BSZ-H / DIH10 2) | Aluminium | M20 x 1.5 or½NPT 3) | IP65 | Raised hinged cover with cylinder head screw | Blue, painted 5) | M24 x 1.5,½NPT |
| BSS | Aluminium | M20 x 1.5 or½NPT 3) | IP65 | Spherical hinged cover with clamping lever | Blue, painted 5) | M24 x 1.5,½NPT |
| BSS-H | Aluminium | M20 x 1.5 or½NPT 3) | IP65 | Raised hinged cover with clamping lever | Blue, painted 5) | M24 x 1.5,½NPT |
| BVS | Stainless steel | M20 x 1.5 3) | IP65 | Precision-cast screw-on lid | Blank, electropolished | M24 x 1.5 |
| BSZ-K | Plastic | M20 x 1.5 or½NPT 3) | IP65 | Spherical hinged cover with cylinder head screw | Black | M24 x 1.5 |
| BSZ-HK | Plastic | M20 x 1.5 or½NPT 3) | IP65 | Raised hinged cover with cylinder head screw | Black | M24 x 1.5 |
| Model | Explosion protection | |||||
|---|---|---|---|---|---|---|
| without | Ex i (gas) Zone 0, 1, 2 | Ex i (dust) Zone 20, 21, 22 | Ex e (gas) Zone 1, 2 | Ex t (dust) Zone 21, 22 | Ex nA (gas) Zone 2 | |
| BS | x | x | x | - | - | - |
| BSZ | x | x | x | x 6) | x 6) | x 7) |
| BSZ-H | x | x | x | x 6) | x 6) | x 7) |
| BSZ-H (2x cable outlet) | x | x | x | x 6) | x 6) | x 7) |
| BSZ-H / DIH10 1) | x | x | - | - | - | - |
| BSS | x | x | - | - | - | - |
| BSS-H | x | x | - | - | - | - |
| BVS | x | x | - | - | - | - |
| BSZ-K | x | x | - | - | - | - |
| BSZ-HK | x | x | - | - | - | - |
| Model | Material | Cable entry thread size | Ingress protection (max.) 1) IEC/EN 60529 | Cover / Cap | Surface | Connection to neck tube |
|---|---|---|---|---|---|---|
| KN4-A | Aluminium | ½NPTor M20 x 1.5 2) | IP65 | Screw-on lid | Blue, painted 3) | M24 x 1.5,½NPT |
| KN4-P 4) | Polypropylene | ½NPT | IP65 | Screw-on lid | White | ½NPT |
| Model | Explosion protection | |||||
|---|---|---|---|---|---|---|
| without | Ex i (gas) Zone 0, 1, 2 | Ex i (dust) Zone 20, 21, 22 | Ex e (gas) Zone 1, 2 | Ex t (dust) Zone 21, 22 | Ex nA (gas) Zone 2 | |
| KN4-A | x | x | - | - | - | - |
| KN4-P 4) | x | - | - | - | - | - |
| Cable entry | Cable entry thread size | Min./max. ambient temperature |
|---|---|---|
| Standard cable entry 1) | M20 x 1.5 or½NPT | -40 ...+80 °C |
| Plastic cable gland (cable Ø 6 ... 10 mm) 1) | M20 x 1.5 or½NPT | -40 ...+80 °C |
| Plastic cable gland (cable Ø 6 ... 10 mm), Ex e 1) | M20 x 1.5 or½NPT | -20 ...+80 °C (standard) -40 ...+70 °C (option) |
| Nickel-plated brass cable gland (cable Ø 6 ... 12 mm) | M20 x 1.5 or½NPT | -40 ...+80 °C |
| Stainless steel cable gland (cable Ø 7 ... 12 mm) | M20 x 1.5 or½NPT | -40 ...+80 °C |
| Plain threaded | M20 x 1.5 or½NPT | - |
| 2 x M20 x 1.5 2) | 2 x M20 x 1.5 | - |
| Junction box M12 x 1 (4-pin) 3) | M20 x 1.5 | -40 ...+80 °C |
| Sealing plugs for transport | M20 x 1.5 or½NPT | -40 ...+80 °C |
| Cable entry | Colour | Ingress protection (max.) 4) IEC/EN 60529 | Explosion protection | |||||
|---|---|---|---|---|---|---|---|---|
| without | Ex i (gas) Zone 0, 1, 2 | Ex i (dust) Zone 20, 21, 22 | Ex e (gas) Zone 1, 2 | Ex t (dust) Zone 21, 22 | Ex nA (gas) Zone 2 | |||
| Standard cable entry 1) | Blank | IP65 | x | x | - | - | - | - |
| Plastic cable gland 1) | Black or grey | IP66 5) | x | x | - | - | - | - |
| Plastic cable gland, Ex e 1) | Light blue | IP66 5) | x | x | x | - | - | - |
| Plastic cable gland, Ex e 1) | Black | IP66 5) | x | x | x | x | x | x |
| Nickel-plated brass cable gland | Blank | IP66 5) | x | x | x | - | - | - |
| Nickel-plated brass cable gland, Ex e | Blank | IP66 5) | x | x | x | x | x | x |
| Stainless steel cable gland | Blank | IP66 5) | x | x | x | - | - | - |
| Stainless steel cable gland, Ex e | Blank | IP66 5) | x | x | x | x | x | x |
| Plain threaded | - | IP00 | x | x | x 7) | x 7) | x 7) | x 7) |
| 2 x M20 x 1.5 2) | - | IP00 | x | x | x 7) | x 7) | x 7) | x 7) |
| Junction box M12 x 1 (4-pin) 3) | - | IP65 | x | x 6) | x 6) | - | - | - |
| Sealing plugs for transport | Transparent | - | not applicable, transport protection |
| First index number | Degree of protection / short description | Test parameter |
|---|---|---|
| 5 | Dust-protected | per IEC/EN 60529 |
| 6 | Dust-tight | per IEC/EN 60529 |
| Second index number | Degree of protection / short description | Test parameter |
|---|---|---|
| 4 | Protected against splash water | per IEC/EN 60529 |
| 5 | Protected against water jets | per IEC/EN 60529 |
| 6 | Protected against strong water jets | per IEC/EN 60529 |
| 7 1) | Protected against the effects of temporary immersion in water | per IEC/EN 60529 |
| 8 1) | Protected against the effects of continuous immersion in water | by agreement |
| Transmitter (selectable versions) | Model T16 | Model T32 |
|---|---|---|
| Data sheet | TE 16.01 | TE 32.04 |
| Output | ||
| 4 ...20mA | x | x |
| HART ® protocol | x | |
| Connection method | ||
| 1 x 2-wire, 3-wire or 4-wire | K, J, E, N,T | K, J, E, N,T |
| Explosion protection | Optional | Optional |
| Connection head | T16 | T32 |
|---|---|---|
| BS | ○ | - |
| BSZ, BSZ-K | ○ | ○ |
| BSZ-H, BSZ-HK | ● | ● |
| BSZ-H (2x cable outlet) | ● | ● |
| BSZ-H / DIH10 | ○ | ○ |
| BSS | ○ | ○ |
| BSS-H | ● | ● |
| BVS | ○ | ○ |
| KN4-A / KN4-P | ○ | ○ |
| Protection tube | Material | Protection tube∅ | Suitable for measuring insert∅ | Connection to head |
|---|---|---|---|---|
| Straight, form 2F DIN 43772 | Stainless steel 1.4571 | 9x1mm 11x2mm 12 x 2.5mm 14 x 2.5mm | 6mm 6 mmwith sleeveØ8mm/ 8mm | M24 x 1.5 (rotatable threaded connection, male nut) |
| Tapered, form 3F DIN 43772 | Stainless steel 1.4571 | 12 x 2.5 mm, tapered to9mm | 6mm |
| Protection tube | Material | Protection tube∅ | Suitable for measuring insert∅ | Connection to head |
|---|---|---|---|---|
| Tapered, weld-on solid tip, in line with DIN 43772, non-standard design | Stainless steel 1.4571 | 9 x 1 mm, tapered to6mm 11 x 2 mm, tapered to6mm 12 x 2.5 mm, tapered to6mm | 3mm | M24 x 1.5 (rotatable threaded connection, male nut) |
| Protection tube | Material | Protection tube ∅ | Suitable for measuring insert∅ | Connection to head |
|---|---|---|---|---|
| Straight, in line with form 2F DIN 43772, non- standard design | 2.4360 (Monel400) / stainless steel 2.4819 (Hastelloy C276) / stainless steel 2.4610 (Hastelloy C4) / stainless steel 3.7035 (Titan Grade 2) / stainless steel | 13.7 x 2.2mm | 6 mmwith sleeveØ8mm/ 8mm | M24 x 1.5 (rotatable threaded connection, male nut) |
| Protection tube | Material | Protection tube∅ | Suitable for measuring insert∅ | Connection to head |
|---|---|---|---|---|
| Straight, in line with form 2F DIN 43772, non- standard design | Tantalum / stainless steel | 11 x 2 mm, tantalum cover 12 x 0.4mm 15 x 3 mm, tantalum cover 16 x 0.4mm | 6mm 6 mmwith sleeveØ8mm/ 8mm | M24 x 1.5 (rotatable threaded connection, male nut) |
| Tapered, in line with form 3F DIN 43772, non- standard design | Tantalum / stainless steel | 12 x 2.5 mm, tantalum cover 13 x 0.4mm | 6mm |
| Flange nominal width | Pressure rating | Sealing face | Protection tube diameter | |
|---|---|---|---|---|
| 9x1mm | 11x2mm 12 x 2,5mm 14 x 2,5mm | |||
| EN 1092-1, DN 25 EN 1092-1, DN 40 | PN 6 | Form B1 | x | x |
| Form B2 | x | x | ||
| Form C (tongue) | x | x | ||
| Form D (groove) | x | x | ||
| PN 10 ... 40 | Form B1 | x | x | |
| Form B2 | x | x | ||
| Form C (tongue) | x | x | ||
| Form D (groove) | x | x | ||
| PN 63 ... 100 | Form B1 | - | x | |
| Form B2 | - | x | ||
| Form C (tongue) | - | x | ||
| Form D (groove) | - | x | ||
| EN 1092-1, DN 50 | PN 6 | Form B1 | x | x |
| Form B2 | x | x | ||
| Form C (tongue) | x | x | ||
| Form D (groove) | x | x | ||
| PN 10 ... 16 | Form B1 | x | x | |
| Form B2 | x | x | ||
| Form C (tongue) | x | x | ||
| Form D (groove) | x | x | ||
| PN 25 ... 40 | Form B1 | x | x | |
| Form B2 | x | x | ||
| Form C (tongue) | x | x | ||
| Form D (groove) | x | x | ||
| PN 63 | Form B1 | - | x | |
| Form B2 | - | x | ||
| Form C (tongue) | - | x | ||
| Form D (groove) | - | x | ||
| PN 100 | Form B1 | - | x | |
| Form B2 | - | x | ||
| Form C (tongue) | - | x | ||
| Form D (groove) | - | x | ||
| DIN 2526/2527, DN 25 DIN 2526/2527, DN 40 | PN 6 | Form C | x | x |
| Form E | x | x | ||
| Form N (groove) | x | x | ||
| Form F (tongue) | x | |||
| x | ||||
| PN 10 ... 16 | Form C | x x | x x | |
| Form E Form N (groove) | x | x | ||
| Form F (tongue) | x | x | ||
| PN 25 ... 40 | x | x | ||
| Form C | x | x | ||
| Form E Form N (groove) | x | x | ||
| Form F (tongue) | x | x |
| Flange nominal width | Pressure rating | Sealing face | Protection tube diameter | |
|---|---|---|---|---|
| 9x1mm | 11x2mm 12 x 2,5mm 14 x 2,5mm | |||
| DIN 2526/2527, DN 25 | PN 64 ... 100 | Form C | - | x |
| DIN 2526/2527, DN 40 | Form E | - | x | |
| Form N (groove) | - | x | ||
| Form F (tongue) | - | x | ||
| DIN 2526/2527, DN 50 | PN 6 | Form C | x | x |
| Form E | x | x | ||
| Form N (groove) | x | x | ||
| Form F (tongue) | x | x | ||
| PN 10 ... 16 | Form C | x | x | |
| Form E | x | x | ||
| Form N (groove) | x | x | ||
| Form F (tongue) | x | x | ||
| PN 25 ... 40 | Form C | x | x | |
| Form E | x | x | ||
| Form N (groove) | x | x | ||
| Form F (tongue) | x | x | ||
| DIN 2526/2527, DN 50 | PN 64 | Form C | - | x |
| Form E | - | x | ||
| Form N (groove) | - | x | ||
| Form F (tongue) | - | x | ||
| PN 100 | Form C | - | x | |
| Form E | - | x | ||
| Form N (groove) | - | x | ||
| Form F (tongue) | - | x | ||
| ASME 1 inch | 150 lbs | RF (Raised face) | x | x |
| ASME 1 ½inch | RFSF (Raised face smooth finish) | x x | x x | |
| ASME 2 inch | FF (Flat face) RTJ (Ring type joint) | x | x | |
| RF (Raised face) | ||||
| 300 lbs | x | x | ||
| RFSF (Raised face smooth finish) | x | x | ||
| FF (Flat face) | x | x | ||
| RTJ (Ring type joint) | x | x | ||
| 600 lbs | RF (Raised face) | - | x | |
| RFSF (Raised face smooth finish) | - | x | ||
| FF (Flat face) | - | x | ||
| RTJ (Ring type joint) | - | x | ||
| 1,500 lbs | RF (Raised face) RFSF (Raised face smooth finish) | - - | x x | |
| - | x | |||
| FF (Flat face) | ||||
| RTJ (Ring type joint) | - | x |
לא מצאתם תשובה בתיעוד? מהנדס יענה במהלך יום עסקים.
שאלו מהנדס →44 מק״טים סטנדרטיים של משפחת TC10
אם ידוע הקוד — בחרו ישירות. אם לא — השתמשו בתצורה במצב «01».
