All AVIGAN productsAll productsAuthorised partner WIKA · since 2003+38 (067) 285-77-70info@avigan.com.uaUARUENHEAR
AI helper
Describe the task — I'll match 3 WIKA models in 30 seconds
TF44 1
TF44
On order
WIKA · Temperature measurement · Family TF

Strap-on temperature sensor

Strap-on thermometer with connection lead for pipe surface temperature measurement, -50 ... +200 °C
Range
-50…200 °C
Protection
IP66
Price
On request
Depends on configuration
Request a quote
+38 (067) 285-77-70·info@avigan.com.uaViberTelegram

Description

The model TF44 strap-on thermometer is used for temperature measurement on pipe surfaces in the range -50 ... +200 °C (-58 ... +392 °F). As a result of the indirect temperature measurement, on one hand any influence on the medium is avoided, and, on the other hand, the medium has no effect on the service life of the thermometer (e.g. high pressure loading, aggressive media).

The specially contoured, aluminium probe sleeve enables exceptional heat transfer from the pipeline to the thermometer. The use of a thermal compound is usually not required. In order to keep the influence of the ambient temperature as low as possible, we recommend that the measuring point is well insulated. In particular, for large temperature differences between medium and the environment, good insulation of the measuring point is essential.

Fig. left: Mounted on a pipe

Fig. right: With quick-mounting bracket

For quick and particularly easy mounting, the TF44 features WIKA quick-mounting brackets for different pipe diameters. With these, model TF44 strap-on thermometers can be mounted easily without tools.

The TF44 consists of a measuring element within an aluminium sleeve. The connection of the probe to the evaluation electronics is achieved via a connection lead from PVC or silicone.

Special features

  • Measuring ranges from -50 ... +200 °C
  • The pipeline system remains sealed
  • The medium is not affected
  • Easy mounting with quick-mounting bracket
  • Good heat transfer through aluminium sleeve
Configurator · Step by step

Build a TF44 for your task

The article number is assembled automatically. If unsure — ask an engineer; we'll match the line's parameters.

Step 1 of 4
Configuration structure· click a highlighted segment to jump to that parameter
Your configuration
  • Probe designSquare end 6 x 6 mm; aluminium
  • Measuring element—
  • Connecting lead—
  • Lead length [W]—
  • Electrical connectionBare wires
  • Mounting accessories—
  • heat directing meansWithout
AI suggestion by parameters

Finish your configuration

Select every option to submit the request.

Send request
Send request