All AVIGAN productsAll productsAuthorised partner WIKA · since 2003+38 (067) 285-77-70info@avigan.com.uaUARUENHEAR
AI helper
Describe the task — I'll match 3 WIKA models in 30 seconds
PG11LF 1
PG11LF
On order
WIKA · Pressure measurement · Family PG11

Bourdon tube pressure gauge, copper alloy

Bourdon tube pressure gauge with copper alloy wetted parts and low-lead content for drinking water applications, compliant with EN 837-1 and ASME B40.100.
Range
-1…60 bar
Accuracy
1.6
Protection
IP33
RoHSPED
Price
On request
Depends on configuration
Request a quote
+38 (067) 285-77-70·info@avigan.com.uaViberTelegram

Description

The model PG11LF pressure gauges are based on the proven Bourdon tube measuring system. The deflection of the Bourdon tube is transmitted to a movement and indicated.

For mounting in control panels, the pressure gauges can, depending on the process connection, be fitted with a surface mounting flange or with a triangular profile ring and mounting bracket.

The model PG11LF was designed for use in all applications requiring copper alloy materials with low-lead content. It is in line with upcoming EU regulations regarding the Drinking Water Directive (DWD) and the Restriction of Hazardous Substances Directive (RoHS).

All materials used in the wetted parts are listed on the European positive list of individual metallic compositions for metallic materials, as detailed in Commission Implementing Decision (EU) 2024/367.

Special features

  • Design per EN 837-1 or ASME B40.100
  • Wetted parts with low-lead content for drinking water
  • Low-lead version, in line with upcoming RoHS directive requirements
  • Nominal sizes of 40 [1 ½"], 50 [2"] and 63 [2 ½"] available
  • Scale ranges to 0 ... 60 bar [0 ... 800 psi]
Configurator · Step by step

Build a PG11LF for your task

The article number is assembled automatically. If unsure — ask an engineer; we'll match the line's parameters.

Step 1 of 4
Configuration structure· click a highlighted segment to jump to that parameter

The scale range of a pressure gauge defines the scale start value and full scale value of the scale printed on the dial of the pressure gauge. The correct scale range depends on the process pressure of the respective application and the process conditions. There are predefined standard scale ranges for pressure gauges in accordance with European and American standards. For special display ranges, please contact WIKA support. Ideally, the process pressure of the application should be approx. 2/3 of the full scale value of the pressure gauge. Example: For a process pressure of 40 bar, for example, a pressure gauge with a scale range of 0 to 60 bar would therefore be recommended.

Your configuration
  • ModelPG11LF
  • VersionWetted parts low-lead content acc. to European Drinking Water Directive
  • Nominal size040 mm
  • Unit of outer Scalebar
  • Measuring rangegauge pressure range
  • Scale range—
  • 2nd Scale or Special Scalewithout
  • Process connection—
  • Connector location—
  • Case—
  • Bezel ringwithout
  • Mounting flange/bracketwithout
  • Windowplastic, clear
  • Restrictorwithout
  • Accuracy classclass 2.5
  • Set / drag pointerwithout
  • Special design featureswithout
  • Certificateswithout
  • Approvalswithout
  • Additional approvalswithout
  • Additional ordering informationWithout
AI suggestion by parameters

Finish your configuration

Select every option to submit the request.

Send request
Send request