WIKA · Level measurement · Family FLR_H_FLR_P_FLR_S
Reed level transmitter
Models FLR-S, FLR-P, FLR-H Reed level transmitter ✓For the process industry ✓High quality ►To the information!
Price
On request
Depends on configuration
Description
The model FLR level transmitters with reed measuring chain are used for level measurement in liquid media. They work on the float principle with magnetic transmission.
The float's magnetic system in the guide tube actuates a resistance measuring chain that corresponds to a 3-wire potentiometer circuit. The measurement voltage generated by this is proportional to the fill level.
The measurement voltage is very finely-stepped due to the contact separation of the measuring chain and is thus virtually continuous. Depending on the requirements several different contact separations are available.
for further approvals see page 3
Reed level transmitter, flange connection with stainless steel connection housing, model FLR-SAI (NMG125)
Special features
- Process- and system-specific solutions possible
- Operating limits: Operating temperature: T = -80 ... +200 °C Operating pressure: P = Vacuum up to 80 bar Limit density: ρ ≥ 400 kg/m 3
- Operating temperature: T = -80 ... +200 °C
- Operating pressure: P = Vacuum up to 80 bar
- Limit density: ρ ≥ 400 kg/m 3
- Wide variety of different electrical connections, process connections and materials
- Optionally with programmable and configurable head-mounted transmitter for 4 ... 20 mA field signals, HART ® , PROFIBUS ® PA and FOUNDATION™ Fieldbus
- Explosion-protected versions (option)
Specifications are being prepared — full datasheet available on request.
Tables from datasheet
| Model | Description | Materials | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Stainless steel | Titanium 3.7035 (grade 2) | PVC | PP | PVDF | Buna | |||||||
| 1.4571 (316Ti) | 1.4404 (316L) | 1.4435 (316L) | 1.4571 (316Ti) / PP | 1.4571 (316Ti) / PA | 1.4571 (316Ti) / Ms | |||||||
| FLR-S | Standard version | x | x | x | x | x | x | x | - | - | - | x |
| FLR-P | Plastic version | - | - | - | - | - | - | - | x | x | x | - |
| FLR-H | Sterile version | - | x | x | - | - | - | - | - | - | - | - |
| Model FLR-S | -80 ...+200 °C |
|---|---|
| Model FLR-P | -10 ...+100 °C |
| Logo | Description | Country |
|---|---|---|
| EU declaration of conformity ■ EMCdirective EN 61326 emission (group 1, class B) and interference immunity (industrial application) ■ RoHS directive ■ ATEX directive (option) Hazardous areas - Ex i II 1/2G Ex ia IIC T6 ...T1 Ga/Gb No.KEMA 01 ATEX 1052 X II 2D Ex ib IIIC T80 ...T230°C Db - Ex d II 2G Ex d IIC T6 Gb / II 2 D Ex tb IIIC T80 °C Db No.TÜV 13 ATEX 7399 X | European Union | |
| EAC ■ EMCdirective No.TC N RU Д-DE.A301.B.00820 ■ Hazardous areas No.RU C-DE.AB72.B.02373 | Eurasian Economic Community | |
| GOST Metrology, measurement technology No. 19358 | Russia | |
| KazInMetr Metrology, measurement technology No. 13946 | Kazakhstan | |
| BelGIM Metrology, measurement technology No. 9711 | Belarus | |
| UkrSEPRO Metrology, measurement technology No. UA-MI/2-4989-2015 | Ukraine | |
| Uzstandard Metrology, measurement technology No. 02.6648 | Uzbekistan | |
| DNV GL ■ Ships, shipbuilding (e.g. offshore) ■ Hazardous areas (No.TAA00002F7) | International | |
| Bureau Veritas Ships, shipbuilding No. 04263/G0 BV | International |
| Logo | Description | Country |
|---|---|---|
| EU declaration of conformity ■ EMCdirective (model FLR-PB) EN 61326 emission (group 1, class B) and interference immunity (industrial application) ■ RoHS directive | European Union | |
| EAC EMCdirective No.TC N RU Д-DE.A301.B.00820 | Eurasian Economic Community |
View all (20)
| Logo | Description | Country |
|---|---|---|
| EU declaration of conformity ■ EMCdirective (model FLR-PB) EN 61326 emission (group 1, class B) and interference immunity (industrial application) ■ RoHS directive | European Union | |
| EAC EMCdirective No.TC N RU Д-DE.A301.B.00820 | Eurasian Economic Community | |
| GOST Metrology, measurement technology No. 19358 | Russia |
| Model FLR-SA | Model FLR-SB | |
|---|---|---|
| Electrical connection | Connection housing:Aluminium80x75x57mm Option: Polypropylene, polyester, stainless steel | Connection housing: Aluminium 80 x 75x57mm with head-mounted transmitter Option: Polypropylene, polyester, stainless steel |
| Process connection | ■ Mounting thread downwards G11/2" or G2" ■ Mounting flange - DIN DN 50 ...DN 200, PN 6 ...PN 100 - ANSI 2" ... 8", class 150 ... 600 | |
| Guide tube diameter | 8mm/12mm/14mm/18mm | |
| Max. guide tube length L | ■ 500 mm(guide tube diameter 8 mm) ■ 1,500 mm(guide tube diameter 12 mm) ■ 3,500 mm(guide tube diameter 14 mm) ■ 6,000 mm(guide tube diameter 18 mm) | |
| Float | Material: Stainless steel 1.4571 (option: Buna, titanium) Float diameter: 44 ...120mm Float selection depending on guide tube diameter and process | conditions (see page 14 and 15) |
| Max. operating pressure | 80 bar (see page 14 and 15) | |
| Temperature range | -40 ...+120 °C Option: ■ High-temperature version: -40 ...+200 °C ■ Low-temperature version: -80 ...+120 °C | |
| Resolution | 2.7 mm/ 5.5 mm/ 7.5 mm/ 9 mm(depending on contact separation) | |
| Overall resistance of the measuring chain | Depending on length and separation | |
| Head-mounted transmitter | External transmitter | Head-mounted transmitter, see page 17 |
| Output | 3-wire potentiometer | 4 ...20mA |
| Connection cable to transmitter/ control room | Cable length max. 2,000 m, 3-wire, screened | 2-wire, screened |
| Permissible power supply | < DC 36V | see the data sheet of the head-mounted transmitter used |
| Mounting position | Vertical ±30° | |
| Ingress protection | up to IP66 or IP68 per IEC/EN 60529 (depending on version) |
| Model FLR-SA | Model FLR-SB | |
|---|---|---|
| Electrical connection | Connection housing: Aluminium 80 x 75x57mm Option: Polypropylene, polyester, stainless steel | Connection housing: Aluminium 80 x 75x57mm with head-mounted transmitter Option: Polypropylene, polyester, stainless steel |
| Process connection | Mounting flange ■ DIN DN 50 ...DN 200, PN 6 ...PN 100 ■ ANSI 2" ... 8", class 150 ... 600 | |
| Guide tube diameter | 18mm | |
| Max. guide tube length L | 4,000mm | |
| Float | Material: ■ Stainless steel 1.4571, ECTFE coated ■ PVDF ■ PDFE Float diameter: 44 ...120mm Float selection depending on guide tube diameter | and process conditions (see page 14 and 15) |
| Max. operating pressure | 80 bar (see page 14 and 15) | |
| Temperature range | -30 ...+100 °C | |
| Resolution | 2.7 mm/ 5.5 mm/ 7.5 mm/ 9 mm(depending on contact | separation) |
| Overall resistance of the measuring chain | Depending on length and separation | |
| Head-mounted transmitter | External transmitter | Head-mounted transmitter, see page 17 |
| Output | 3-wire potentiometer | 4 ...20mA |
| Connection cable to transmitter / control room | Cable length max. 2,000 m, 3-wire, screened | 2-wire, screened |
| Permissible power supply | < DC 36V | See the data sheet of the head-mounted transmitter used |
| Mounting position | Vertical ±30° | |
| Ingress protection | up to IP66 or IP68 per IEC/EN 60529 (depending on version) |
| Model FLR-SE | Model FLR-SF | |
|---|---|---|
| Electrical connection | Connection cable ■ PVC ■ Silicone ■ PUR | Coupler connector ■ DIN EN 175301-803 (previously DIN 43650, 4-pin) ■ M12 (4-pin) |
| Process connection | Mounting thread upwards:G⅜"or G½" others on request | |
| Guide tube diameter | 8mm/12mm/14mm/18mm | |
| Max. guide tube length L | ■ 500 mm(guide tube diameter 8 mm) ■ 3,500 mm(guide tube diameter 12 or 14 mm) ■ 6,000 mm(guide tube diameter 18 mm) | |
| Float | Material: Stainless steel 1.4571 (option: Buna, titanium) Float diameter: 44 ...120mm Float selection depending on guide tube diameter and process conditions (see page 14 and 15) | |
| Max. operating pressure | 80 bar | |
| Temperature range | PVC/PUR cable: -10 ...+80 °C Silicone cable: -10 ...+120 °C | |
| Resolution | 2.7 mm/ 5.5 mm/ 7.5mm/9mm (depending on contact separation) | |
| Overall resistance of the measuring chain | Depending on length and separation | |
| Output | 3-wire potentiometer | |
| Connection cable to transmitter | Cable length max. 2,000 m, 2-wire, screened | |
| Mounting position | Vertical ±30° | |
| Ingress protection | up to IP66 or IP68 per IEC/EN 60529 (depending on version) |
| Model FLR-PA | Model FLR-PB | |
|---|---|---|
| Electrical connection | Connection housing: Polyester 80 x 75x57mm | Connection housing: Polyester 80 x 75x57mm with head-mounted transmitter |
| Process connection | ■ Mounting thread downwards G2", others on request ■ Mounting flange - DIN DN 65 ...DN 125, PN 10, form A - ANSI 2 ½" ... 5", class 150 FF | |
| Guide tube diameter | 16 or 20 mm(strengthened with a metallic inner tube) | |
| Max. guide tube length L | ■ 3,000 mm(guide tube diameter 16 mm) ■ 5,000 mm(guide tube diameter 20 mm) | |
| Float | Material: Polypropylene, PVDF, PVC Float diameter: 44 ...80mm Float selection depending on guide tube diameter and process conditions (see page 14 | and 15) |
| Max. operating pressure | 3 bar | |
| Temperature range | Polypropylene -10 ...+80 °C PVDF -10 ...+100 °C PVC 0 ... 60 °C | |
| Resolution | 2.7 mm/ 5.5 mm/ 7.5mm/9mm (depending on contact separation) | |
| Overall resistance of the measuring chain | Depending on length and separation | |
| Head-mounted transmitter | External transmitter | Head-mounted transmitter, see page 17 |
| Output | 3-wire potentiometer | 4 ...20mA |
| Connection cable to transmitter / control room | Cable length max. 2,000 m, 3-wire, screened | 2-wire, screened |
| Permissible power supply | < DC 36V | See the data sheet of the head-mounted transmitter used |
| Mounting position | Vertical ±30° | |
| Ingress protection | up to IP66 or IP68 per IEC/EN 60529 (depending on version) |
| Models FLR-SAI (NMG 125) | Model FLR-SBI (NMG 125) | |||||
|---|---|---|---|---|---|---|
| Electrical connection | Connection housing:Aluminium80x75x57mm Option: Stainless steel with | Connection housing: Aluminium 80 x 75x57mm head-mounted transmitter Option: Stainless steel | ||||
| Process connection | ■ Mounting thread downwards G11/2" or G2", others on request ■ Mounting flange - DIN DN 50 ...DN 350, PN 6 ...PN 100 - ANSI 2" ... 8", class 150 ...600 | |||||
| Guide tube diameter | 12mm/14mm/18mm | |||||
| Max. guide tube length L | see page 13 | |||||
| Float | Material: Stainless steel 1.4571 Float diameter: 44 ...120mm Float selection depending on guide tube diameter and process conditions (see page 14 and 15) | |||||
| Max. operating pressure | see page 14 and 15 | |||||
| Temperature class ■ Surface temperature (EPL Db) ■ Process temperature ■ Ambient temperature at connection housing (T a ) | Max. Max. Max. | T1 230 °C 200 °C 80 °C | T2 230 °C 200 °C 80 °C | T3 195 °C 165 °C 80 °C | T5 95 °C 65 °C 65 °C | T6 80 °C 50 °C 50 °C |
| Resolution | 2.7 mm/ 5.5 mm/ 7.5 mm/ 9 mm(depending on contact separation) | |||||
| Overall resistance of the measuring chain | Depending on length and separation | |||||
| Control circuit | Ignition protection type Ex ia IIC (only for connection to a certified intrinsically safe control circuit) | |||||
| Transmitter | External | transmitter | with max. | 120 mA, | Head-mounted | transmitter in accordance with |
| Output | 3-wire potentiometer 4 ...20mA | |||||
| Connection cable to transmitter/ control room (if head-mounted transmitter) | Cable length max.2,000 m, 3-wire, screened 2-wire, | screened | ||||
| Permissible power supply | < DC 36V See | the data sheet of the head-mounted transmitter used | ||||
| Mounting position | Vertical ±30° | |||||
| Ingress protection | up to IP66 or IP68 per IEC/EN 60529 (depending on version) |
| Model FLR-SAD (AF-ADF) | Model FLR-SBD (AF-ADF) | |
|---|---|---|
| Electrical connection | Connection housing: Aluminium 170 x 151x87mm Option: Stainless steel | Connection housing: Aluminium with head- mounted transmitter Option: Stainless steel |
| Process connection | ■ Mounting thread downwards G11/2" or G2", others on request ■ Mounting flange - DIN DN 50 ...DN 350, PN 6 ...PN 40 - ANSI 2" ... 14", class 150 ...300 | |
| Guide tube diameter | 12mm/14mm/18mm | |
| Max. guide tube length L | ■ 3,500 mm(guide tube diameter 12 mm) - flanged version only ■ 3,500 mm(guide tube diameter 14 mm) ■ 6,000 mm(guide tube diameter 18 mm) | to 1,500mm |
| Float | Material: Stainless steel 1.4571 Float diameter: 44 ...120mm Float selection depending on guide tube diameter and process conditions (see page 14 | and 15) |
| Max. operating pressure | see page 14 and 15 | |
| Temperature class | T4: 120 °C, T5: 95 °C, T6: 80 °C | |
| Resolution | 2.7 mm/ 5.5 mm/ 7.5 mm/ 9 mm(depending on contact | separation) |
| Overall resistance of the measuring chain | Depending on length and separation | |
| Transmitter | External transmitter | Head-mounted transmitter, see page 17 |
| Output | 3-wire potentiometer | 4 ...20mA |
| Connection cable to transmitter/ control room (if head-mounted transmitter) | Cable length max.2,000 m, 3-wire, screened | 2-wire, screened |
| Permissible power supply | < DC 36V | See the data sheet of the head-mounted transmitter used |
| Mounting position | Vertical ±30° | |
| Ingress protection | up to IP66 or IP68 per IEC/EN 60529 (depending on version) |
| Model FLR-PE | Model FLR-PF | |
|---|---|---|
| Electrical connection | Connection cable ■ PVC ■ Silicone ■ PUR | Coupler connector ■ DIN EN 175301-803 (previously DIN 43650, 4-pin) ■ M12 (4-pin) |
| Process connection | Mounting thread upwards: ■ G½" (guide tube diameter 16 mm) ■ G1" (guide tube diameter 20 mm) others on request | |
| Guide tube diameter | 16 or 20 mm(strengthened with a metallic inner tube) | |
| Max. guide tube length L | ■ 3,000 mm(guide tube diameter 16 mm) ■ 5,000 mm(guide tube diameter 20 mm) | |
| Float | Material: Polypropylene, PVDF, PVC Float diameter: 55 ...80mm Float selection depending on guide tube diameter and process conditions (see page 14 and 15) | |
| Max. operating pressure | 3 bar | |
| Temperature range | Polypropylene -10 ...+80 °C PVDF -10 ...+100 °C PVC 0 ... 60 °C | |
| Resolution | 2.7 mm/ 5.5 mm/ 7.5mm/9mm (depending on contact separation) | |
| Overall resistance of the measuring chain | Depending on length and separation | |
| Connection cable to transmitter | Cable length max. 2,000 m, 3-wire, screened | |
| Mounting position | Vertical ±30° | |
| Ingress protection | up to IP66 or IP68 per IEC/EN 60529 (depending on version) |
| Model FLR-HA3 | Model FLR-HB3 | |
|---|---|---|
| Electrical connection | Connection housing: Stainless steel 1.4571 with threaded connection M20 x 1.5 (polyamide or hygienic design) | Connection housing: Aluminium with head-mounted transmitter Option: Polypropylene, polyester, stainless steel |
| Process connection | ■ Clamp pipe connection ISO 2852, DN 32 …DN100or 1.5" …4" ■ Clamp pipe connection DIN 32676, DN 32 …DN100or 1.5" …4" ■ Aseptic mounting thread downwards DIN 11864-1, DN 32 ...DN 100 or 1.5" ... 4" ■ Aseptic liner DIN 11864-1, DN 32 ...DN 100 or 1.5" ... 4" ■ Aseptic flange connection DIN 11864-2 (DN 32 ...DN 50 or 1.5" ... 2" ■ Aseptic clamp connection DIN 11864-3, DN 32 ...DN 100 or 1.5" ... 4" ■ VARIVENT ® (form F, N and G) ■ BioConnect ® threaded connection, DN 32 …DN100or 1,5" …2" ■ BioConnect ® flange connection, DN 32 …DN100or 1.5" …2" | |
| Guide tube diameter | 12mm/14mm/16 mm/ 17.2 mm(stainless steel 1.4435 or 1.4404, surface ground or polished, R <0.8µm) | |
| Max. guide tube length L | ■ 1,500mm( guide tube diameter 12 mm) ■ 3,500mm( guide tube diameter 14 mm) ■ 6,000 mm(guide tube diameter 16 mm) ■ 6,000mm( guide tube diameter 17.2 mm) | |
| Float | Material: Stainless steel 1.4435 or 1.4404 Float diameter: 50 ...80mm | |
| Max. operating pressure | 10 bar | |
| Temperature range | Medium standard: -40 ...+200 °C Sensor housing: -40 ...+85 °C | |
| Resolution | 2.7 mm/ 5.5 mm/ 7.5 mm/ 9 mm(depending on contact separation) | |
| Overall resistance of the measuring chain | Depending on length and separation | |
| Head-mounted transmitter | External transmitter | Head-mounted transmitter, see page 17 |
| Output | 3-wire potentiometer | 4 ...20mA |
| Connection cable to transmitter/control room (if head-mounted transmitter) | Cable length max.2,000 m, 3-wire, screened | 2-wire, screened |
| Permissible power supply | < DC 36V | See the data sheet of the head-mounted transmitter used |
| Mounting position | Vertical ±30° | |
| Ingress protection | up to IP66 or IP68 per IEC/EN 60529 (depending on version) |
| Guide tube | Max. guide tube length L | |
|---|---|---|
| Version A | Version B | |
| Ø 12 x 1 | 660mm | 3,500mm |
| Ø 14 x 1 | 940mm | 5,000mm |
| Ø 14 x 2 | 1,600mm | 6,000mm |
| Ø 18 x 2 | 3,000mm | 6,500mm |
| Material | Version | Suits guide tube Ø inmm | Ø A inmm | B inmm | Ø C inmm | Max.operating pressure in bar | Max. operating temp. in °C | Limit density 85% in kg/m 3 | Order no. |
|---|---|---|---|---|---|---|---|---|---|
| Stainless steel | V29A | 8 | 29 | 28 | 9 | 25 | 100 | 920 | 027355 |
| V29A/40 | 12 | 29 | 40 | 13 | 10 | 180 | 720 | 030352 | |
| V52R | 12 | 52 | 52 | 15 | 40 | 250 | 720 | 020913 | |
| V62R | 12 | 62 | 61 | 15 | 32 | 250 | 670 | 026026 | |
| V83R | 12 | 83 | 81 | 15 | 25 | 250 | 430 | 021089 | |
| V80R | 18 | 80 | 76 | 23 | 25 | 250 | 630 | 005479 | |
| V98R | 18 | 98 | 96 | 23 | 25 | 250 | 600 | 005490 | |
| V105R | 18 | 105 | 103 | 23 | 25 | 250 | 560 | 005494 | |
| V120R | 18 | 120 | 117 | 23 | 25 | 250 | 470 | 026726 | |
| V120R | 18 ... 30 | 120 | 116 | 38 | 25 | 250 | 537 | - | |
| V200R | 18 ... 30 | 200 | 192 | 56 | 16 | 250 | 581 | 005503 | |
| V300R | 18 ... 30 | 300 | 294 | 56 | 16 | 250 | 342 | - | |
| Titanium 3.7035 | T52R | 12 | 52 | 52 | 15 | 25 | 250 | 680 | 026655 |
| T52R | 12 | 52 | 52 | 15 | 60 | 250 | 810 | 034037 | |
| T52R | 12 | 52 | 52 | 15 | 80 | 250 | 957 | 122702 | |
| T62R | 12 | 62 | 62 | 15 | 25 | 250 | 390 | 005538 | |
| T83R | 12 | 83 | 81 | 15 | 25 | 250 | 350 | 005544 | |
| T80R | 18 | 80 | 76 | 23 | 25 | 250 | 670 | 005543 | |
| T105R | 18 | 105 | 103 | 23 | 25 | 250 | 440 | 005549 | |
| T120R | 18 | 120 | 117 | 38 | 25 | 250 | 480 | 115002 | |
| Stainless steel 1.4571 ECTFE coated | VEC81R | 18 | 81 | 77 | 22 | 25 | Depending on medium | 634 | 110232 |
| VEC99R | 18 | 99 | 97 | 22 | 25 | Depending on medium | 653 | - | |
| VEC106R | 18 | 106 | 104 | 22 | 25 | Depending on medium | 595 | - | |
| VEC121R | 18 | 121 | 118 | 22 | 3 | Depending on medium | 435 | - |
| Material | Version | Suits guide tube Ø inmm | Ø A inmm | B inmm | Ø C inmm | Max. operating pressure in bar | Max. operating temp. in °C | Limit density 85% in kg/m 3 | Order no. |
|---|---|---|---|---|---|---|---|---|---|
| Stainless steel 1.4571 | V27A | 8 | 27 | 31 | 10 | 16 | 125 | 787 | 009679 |
| V44R | 12 | 44 | 52 | 15 | 16 | 250 | 780 | 034196 | |
| Titanium 3.7035 | T44R | 12 | 44 | 52 | 15 | 16 | 250 | 550 | 022639 |
| PVC | P55R | 16 | 55 | 54 | 22 | 3 | 60 | 805 | 033696 |
| P80R | 20 | 80 | 79 | 25 | 3 | 60 | 577 | 033697 | |
| Polypropylene | PP55R | 16 | 55 | 54 | 22 | 3 | 80 | 592 | 033700 |
| PP80R | 20 | 80 | 79 | 25 | 3 | 80 | 438 | 033701 | |
| PVDF | PF55R | 16 | 55 | 69 | 22 | 3 | 100 | 809 | 033698 |
| PF80R | 20 | 80 | 79 | 25 | 3 | 100 | 706 | 033699 |
| Material | Model | Suits guide tube Ø inmm | Ø A in mm | B in mm | Ø C in mm | Max. operating pressure in bar | Max. operating temp. in °C | Limit density 85 %in kg/m 3 | Order no. |
|---|---|---|---|---|---|---|---|---|---|
| Stainless steel 1.4435 | V80/88/R2/ 3A/35 radial | 17.2 | 80 | 55 | 23 | 16 | 250 | 800 | 025984 |
| V50/55/17/ A34/3A/35 | 12 | 50 | 55 | 16.8 | 16 | 250 | 1,000 | 129583 | |
| SV3A80/23/V | 16 | 80 | 73 | 23 | 40 | 200 | 750 | 125815 | |
| V55/70/ A34/3A/35 | 12 | 55 | 70 | 17 | 16 | 250 | 780 | 14462858 |
| Model | 4 ... 20 mA | HART ® | Ex i | Display | Order number |
|---|---|---|---|---|---|
| TE | x | - | x | - | 014832 |
| TS | x | - | - | - | 005894 |
| T32E | x | x | x | - | 025216 |
| T32S | x | x | - | - | 114795 |
| TLH | x | x | - | x | 019989 |
| TLEH | x | x | x | x | 021104 |
| T15 | x | - | x | - | 122955 122954 |
| Replaced model | Current model | Description |
|---|---|---|
| ERV... | FLR-S | Process connection: mounting thread upwards |
| ARV... | FLR-S | Process connection: mounting thread downwards |
| AFV... | FLR-S | Process connection: flange connection |
| AFVEC... | FLR-S | Material: Stainless steel 1.4571 E-CTFE-coated ; Option: anti-static |
| AFVTF... | FLR-S | Material: Stainless steel 1.4571 PTFE-coated ; Option: anti-static |
| AF-ADF... | FLR-S | Approval:ATEX Ex-d; Process connection: flange connection |
| NMG125... | FLR-S | Approval:ATEX Ex-i |
| AMRV... | FLR-H | Food industry design, Process Connection: Dairy fitting |
| AFCV... | FLR-H | Food industry design, Process Connection: Clamp connection |
| ERP... | FLR-P | Material: PVC; Process connection: mounting thread upwards |
| APRP... | FLR-P | Material: PVC; Process connection: mounting thread downwards |
| APFP ... | FLR-P | Material: PVC; Process connection: flange connection |
| ERPP... | FLR-P | Material: Polypropylen; Process connection: mounting thread upwards |
| ABRPP ... | FLR-P | Material: Polypropylen; Process connection: mounting thread downwards |
| APFPP ... | FLR-P | Material: Polypropylen; Process connection: flange connection |
| ERPF... | FLR-P | Material: Polypropylen; Process connection: mounting thread upwards |
| APRPF ... | FLR-P | Material: PVDF; Process connection: mounting thread downwards |
| APFPF ... | FLR-P | Material: PVDF; Process connection: flange connection |
| Sensor | Description | Materials | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| model | Stainless steel | Titanium | PVC | PP | PVDF | Buna | |||||||
| 1.4571 | 1.4404 | 1.4435 | 1.4571 (316Ti) | 1.4571 | 1.4571 | 3.7035 | |||||||
| (316Ti) | (316L) | (316L) | (316Ti) | (316Ti) | (grade 2) | ||||||||
| / PP | / PA | / Ms | |||||||||||
| FLR-S | Reed-chain■sensor,■ standard■version | x | x | x | x | x | x | x | x |
Industry
Oil & Gas
Chemical, petrochemical industry, natural gas, offshore, shipbuilding, machine building, power generating equipment, power plants
Industry
Chemistry / Pharma
Process water and drinking water treatment, food and beverage industry, pharmaceutical industry
Couldn't find the answer in the documentation? An engineer will reply within a business day.
Ask an engineer →