OEM датчик тиску
Опис
MH-4-CAN, створений на базі MH-4, є потужним, надійним і надзвичайно стійким до впливів датчиком тиску для мобільних робочих машин. Навіть за умов підвищених вимог датчик забезпечує постійні, точні вимірювальні дані та гарантує високу експлуатаційну безпеку. Особливістю MH-4-CAN, як випливає з назви, є послідовний інтерфейс CANopen ® або SAE J1939. Це дає змогу застосовувати його в складних машинах і забезпечує перевагу простого та економічно ефективного розширення системи завдяки прокладанню ліній на великі відстані, одночасно гарантуючи стабільність сигналу та цілісність сигналу.
Особливості
- Розроблено для екстремальних умов експлуатації в мобільних робочих машинах
- Найвища стабільність і цілісність сигналу завдяки CANopen ®
- Надійність та найвища точність протягом усього життєвого циклу
- Замовницькі адаптації та індивідуалізація
- Великі виробничі потужності
Питання та відповіді
Які діапазони вимірювання тиску доступні для MH-4-CAN?
Доступні діапазони від 0 до 40, 60, 100, 160, 250, 400 та 600 bar, а також у фунтах на квадратний дюйм: 0 … 500 psi, 0 … 1000 psi, 0 … 1500 psi, 0 … 2000 psi, 0 … 3000 psi, 0 … 5000 psi та 0 … 8000 psi.
Яка точність датчика?
Клас точності становить 0.25 % BFSL відповідно до стандарту IEC 62828-1, із гарантією надійності та високої точності протягом усього життєвого циклу.
Які варіанти процесних з'єднань пропонуються?
Широкий вибір: M14 x 1.5, ISO 6149-2, JIS B 2351-1, 7/16-20 UNF O-ring BOSS, 9/16-18 UNF-2A O-ring BOSS, 3/4-16 UNF-2A O-ring BOSS, 7/16-20 UNF-2A з конусним ущільненням 74°, G ¼ A, G ⅛ B, G ¼ B, G ⅜ B, ⅛ NPT, ¼ NPT, PT ¼, PT ⅜, R ¼, R ⅜ та інші.
Чим відрізняється MH-4-CAN від базової моделі MH-4?
MH-4-CAN створений на базі MH-4, але має послідовний інтерфейс CANopen® або SAE J1939, що дає змогу застосовувати його в складних машинах і забезпечує стабільність та цілісність сигналу при прокладанні ліній на великі відстані.
У якому температурному діапазоні працює датчик?
Температура навколишнього середовища: -40 … +85 °C; температура вимірюваного середовища: -40 … +100 °C.
Який ступінь захисту корпусу?
Ступінь захисту IP67, що дозволяє експлуатацію в брудних і вологих умовах мобільної техніки.
Чи є вибухозахищене виконання чи сертифікація SIL?
Ні, у наданих даних вибухозахист і рівень безпеки SIL не вказані. Датчик має сертифікацію CE, UKCA, RoHS та EMC.
Яке електричне з'єднання використовується?
Круглий роз'єм M12 x 1, 5-контактний; живлення — DC 9 … 35 V.
Зберіть MH-4-CAN під свою задачу
Артикул збирається автоматично. Якщо сумніваєтесь — напишіть інженеру; підкажемо за параметрами лінії.
- ВерсіяMH-4-CAN (Standard)
- Вихідний сигналCANopen
- Одиницябар
- Діапазон вимірювання—
- Приєднання до процесу—
- Ущільнення—
- Електричне підключенняКруглий роз'єм M12 x 1, 5-контактний
- Схваленнябез
- Додаткова інформація для замовленняБез
Завершіть конфігурацію
Оберіть всі параметри, щоб надіслати запит.
| Модель | MH-4-CAN |
| Сімейство | MH-4 |
| Підтип | OEM pressure sensor |
| Діапазон тиску | 0…40 bar · 0…60 bar · 0…100 bar · 0…160 bar · 0…250 bar · 0…400 bar · 0…600 bar · 0…500 psi · 0…1000 psi · 0…1500 psi · 0…2000 psi · 0…3000 psi · 0…5000 psi · 0…8000 psi |
| Клас точності | 0.25 % BFSL |
| Стандарт точності | IEC 62828-1 |
| Технологічне приєднання | M14 x 1.5ISO 6149-2JIS B 2351-17/16-20 UNF, O-ring BOSS9/16-18 UNF-2A, O-ring BOSS3/4-16 UNF-2A, O-ring BOSS7/16-20 UNF-2A, sealing cone 74°G ¼ A⅛ NPT¼ NPTPT ¼PT ⅜R ¼R ⅜G ⅛ BG ¼ BG ⅜ BG¼Bx10, form O with collarG3/8 A, form O with collarPT 3/8R 3/8G3/8 BG1/4AG3/8A7/16-20UNF O-ring boss9/16-18UNF-2A O-ring boss3/4-16UNF-2A O-ring boss7/16-20UNF-2A sealing cone 74°1/8NPT1/4NPTPT1/4R1/4G1/8BG1/4B |
| Темп. процесу | −40…+100 °C |
| Вихідний сигнал | CANopen® · SAE J1939 |
| Живлення | DC 9 ... 35 V |
| Електр. приєднання | Circular connector M12 x 1 5-pin |
| Матеріал корпусу | Stainless steel 304L, PH grade steel, glass-fibre reinforced plastic (PBT), PBT (glass-fibre reinforced plastic) |
| Матеріал змочуваних частин | Stainless steel 304L, PH grade steel |
| Матеріал ущільнення | NBR, FPM/FKM, Copper, Stainless steel |
| Темп. навколишнього середовища | −40…+85 °C |
| Ступінь захисту IP | IP67 |
| Вага | 0.08 kg |
| Сертифікати | CEUKCARoHSEMC |
| Мови datasheet | EN, DE |
| Model | Description |
|---|---|
| MH-4 | OEMpressure sensor |
| MH-4 (v) | OEMpressure sensor with pressure compensation element (v = vented) → The pressure compensation element ensures higher accuracy for measuring ranges < 160 bar [2,000 psi]. → The pressure compensation element is available for selected electrical connections. → Not suited to applications involving diesel fuels, ambient conditions involving salt mist and extreme temperature fluctuations. |
| Non-linearity per IEC 62828-1 | ≤ ±0.25 %of span (BFSL) 1) |
|---|---|
| Accuracy | → See 'Total probable error' below |
| Max. measured error per IEC 62828-1 | → See 'Total probable error' below |
| Total probable error per IEC 62828-2 | → See 'Total probable error' below |
| Long-term drift per IEC 62828-1 | ≤ ±0.1 %of span |
| Reference conditions | Per IEC 62828-1 |
| bar | |
|---|---|
| MH-4-CAN | MH-4-CAN (v) |
| 0…40 | 0…40 |
| 0…60 | 0…60 |
| 0 …100 | 0 …100 |
| 0 …160 | - |
| 0 …250 | - |
| 0 …400 | - |
| 0 …600 | - |
| Units | ■ bar ■ psi ■ MPa |
|---|---|
| Maximum working pressure | → Corresponds to the upper measuring range value / measuring range full scale value |
| Overpressure limit per IEC 62828-2 | The overpressure limit is based on the measuring range. Depending on the selected process connection and sealing, restrictions in overpressure limit can result. |
| Measuring range ≤ 400 bar [≤ 5,000 psi] | 3 times |
| Measuring range 600 bar [8,000 psi] | 2 times |
| Vacuum resistance | Yes |
Переглянути всі (18)
| Standard | Thread size | Max. measuring range | Overpressure limit | Sealing |
|---|---|---|---|---|
| DIN EN ISO 1179-2 (formerly DIN 3852-E) | G¼A | 600 bar [8,700 psi] | 858 bar [12,440 psi] | ■ NBR ■ FPM/ FKM |
| DIN EN ISO 9974-2 (formerly DIN 3852-E) | M14 x 1.5 | 600 bar [8,700 psi] | 858 bar [12,440 psi] | |
| ISO 6149-2 | M14 x 1.5 | 600 bar [8,700 psi] | 858 bar [12,440 psi] | |
| JIS B 2351-1 | G¼Bx10, form Owith collar | 600 bar [8,700 psi] | 858 bar [12,440 psi] | |
| G3/8 A, form Owith collar | 600 bar [8,700 psi] | 858 bar [12,440 psi] | ||
| SAE J514 (Compatible for threaded holes SAE J1926) | 7/16-20 UNF, O-ring BOSS | 600 bar [8,700 psi] | 858 bar [12,440 psi] | |
| 9/16-18 UNF-2A, O-ring BOSS | 600 bar [8,700 psi] | 858 bar [12,440 psi] | ||
| 3/4-16 UNF-2A, O-ring BOSS | 600 bar [8,700 psi] | 858 bar [12,440 psi] | ||
| 7/16-20 UNF-2A, sealing cone 74° | 800 bar [11.600 psi] | 1,144 bar [16,500 psi] | ||
| ANSI/ASME B1.20.1 | ⅛NPT | 400 bar [5,800 psi] | 572 bar [8,290 psi] | - |
| ¼NPT | 1,000 bar [14,500 psi] | 1,480 bar [21,400 psi] | ||
| KS | PT¼ | 1,000 bar [14,500 psi] | 1,480 bar [21,400 psi] | |
| PT 3/8 | 1,000 bar [14,500 psi] | 1,480 bar [21,400 psi] | ||
| ISO 7 | R¼ | 1,000 bar [14,500 psi] | 1,480 bar [21,400 psi] | |
| R 3/8 | 1,000 bar [14,500 psi] | 1,480 bar [21,400 psi] | ||
| EN 837 | G⅛B | 400 bar [5,800 psi] | 572 bar [8,290 psi] | ■ Copper ■ Stainless steel |
| G¼B | 1,000 bar [15,000 psi] | 1,480 bar [21,400 psi] | ||
| G3/8 B | 1,000 bar [15,000 psi] | 1,480 bar [21,400 psi] |
| psi | |
|---|---|
| MH-4-CAN | MH-4-CAN (v) |
| 0 …500 | 0 …500 |
| 0 …1.000 | 0 …1.000 |
| 0 …1.500 | 0 …1.500 |
| 0 …2.000 | - |
| 0 …3.000 | - |
| 0 …5.000 | - |
| 0 …8.000 | - |
| Signal type | ||
|---|---|---|
| CANopen ® | Communication profile | CiA 301 |
| Device profile | CiA 404 | |
| Layer-setting services and protocol | CiA 305 | |
| Automatic bit-rate detection | CiA 801 | |
| → See 'Special documentation for CANopen ® ' | ||
| Communication | ||
| Configuration of the CANopen ® interface | It is possible to order the model MH-4-CAN already preconfigured. | |
| → See 'Special documentation for CANopen ® ' | ||
| Baud rate | 0 | 1000 kbit/s |
| 1 | 800 kbit/s | |
| 2 | 500 kbit/s | |
| 3 | 250 kbit/s (standard) | |
| 4 | 125 kbit/s | |
| 5 | 100 kbit/s | |
| 6 | 50 kbit/s | |
| 7 | 20 kbit/s |
| Output signal Node ID | 001 ... 127 | 001 (standard) 1) |
|---|---|---|
| PDO mapping | A | Object 0x9130.01 (pressure value int32) and 0x6150.01 (status) |
| B | Object 0x6130.01 (pressure value float) and 0x6150.01 (status) (standard) | |
| C | Object 0x7130.01 (pressure value int16) and 0x6150.01 (status) | |
| PDO cycle | 00001 ... 65535 | Period in milliseconds (default: 100) |
| Decimal points | A | Optimum (standard) |
| 0 ... 5 | Number of decimal points ¹⁾ | |
| Transmission type | 001 ... 240 | Synchronous transmission 001 (standard) ¹⁾ |
| 254 | Asynchronous cyclic transmission (event-timer-driven) | |
| 255 | Asynchronous transmission (event-timer-driven and/or PV change, PV limit exceeded) | |
| Event timer | 0 | Automatic (standard) |
| 00001 ... 65535 | Event timer in milliseconds ¹⁾ | |
| Auto-operational | Z | Off via object 1F80 (standard) |
| A | On via object 1F80 | |
| Heartbeat | 0 | Without (standard) |
| 00001 ... 65535 | Heartbeat in milliseconds ¹⁾ | |
| Signal type | ||
| J1939 | SAE J1939 | |
| Communication | ||
| Baud rate | 2 | 500 kbit/s |
| 3 | 250 kbit/s (standard) | |
| TR-JPRIO | 0 | 0 |
| 1 | 1 | |
| 2 | 2 | |
| 3 | 3 | |
| 4 | 4 | |
| 5 | 5 | |
| 6 | 6 (standard) | |
| 7 | 7 | |
| Parameter Group Number (PGN) | → See 'Special documentation J1939, 14547349' | |
| Suspect Parameter Number (SPN) | → See 'Special documentation J1939, 14547349' | |
| Source address (SA) | 128 | 128 (standard) |
| 000 ... 253 | Source address | |
| Arbitrary Address Capable | 0 | 0 |
| 1 | 1 (standard) | |
| Industry Group | 0 | Global (standard) |
| 1 | On-highway equipment | |
| 2 | Agricultural and forestry equipment | |
| 3 | Construction equipment | |
| 4 | Marine | |
| 5 | Stationary industrial process control | |
| 6 | Reserved | |
| 7 | Reserved | |
| Vehicle System Instance | 0 ... 15 | 00 (standard) |
| Output signal | ||
|---|---|---|
| Vehicle System | 0 ... 127 | 000 (standard) |
| Function | 0 ... 255 | 000 (standard) |
| Function Instance | 0 ... 31 | 0 (standard) |
| ECU Instance | 0 | 0 (standard) |
| 1 | 1 | |
| 2 | 2 | |
| 3 | 3 | |
| 4 | 4 | |
| 5 | 5 | |
| 6 | 6 | |
| 7 | 7 | |
| TRR rate var. | 0 ... 65535 | TRR rate var. |
| 100 | 100 ms (standard) | |
| Voltage supply | ||
| Supply voltage | ■ CANopen:DC 9 ...35V ■ SAE J1939:DC9…35V | |
| Current supply | ■ CANopen: < 50mA ■ SAE J1939: < 50mA | |
| Overvoltage resistance | DC 36V | |
| Dynamic behaviour | ||
| Settling time per IEC 62828-1 | ≤ 3 ms | |
| Switch-on time | < 500 ms |
| Connection type | IP code 1) |
|---|---|
| MH-4-CAN | |
| Circular connector M12 x 1 5-pin | IP67 per IEC 60529 |
| MH-4-CAN (v) | |
| Circular connector M12 x 1 5-pin | IP67 per IEC 60529 |
| Connection type | → See 'Electrical connection' table above |
|---|---|
| Pin assignment | → See 'Pin assignment' table below |
| Ingress protection (IP code) per IEC 60529 | → See 'Electrical connection' table above |
| Short-circuit resistance | CAN-High/CAN-Low vs. U+/U- (U+: ≤ DC 24 V) |
| Reverse polarity protection | U+ vs. U- |
| Insulation voltage | DC 500V |
| CAN bus impedance | A CAN bus impedance of 120 ohm is strictly required to reach a wide range and high number of involved persons with all transmission rates. In order to avoid gradients in potential, the shield must be connected along the entire bus with the lowest possible impedance. |
| 1 | Shield | |
|---|---|---|
| 2 | U+ | |
| 3 | U- | |
| 4 | CAN-High | |
| 5 | CAN-Low |
| Material (wetted) | Stainless steel 304L, PH grade steel |
|---|---|
| Material (in contact with the environment) | Stainless steel 304L, electrical connection made of highly resistant glass-fibre rein - forced plastic (PBT) |
| Operating conditions | |
|---|---|
| Medium temperature limit 1) | -40 ...+100 °C [-40 ...+212 °F] |
| Ambient temperature limit 1) | -40 ...+85 °C [-40 ...+185 °F] |
| Storage temperature limit | -40 ...+70 °C [-40 ...+158 °F] |
| Relative humidity per EN 60068-2-78 | 93 %at 55 °C [131 °F] |
| Pollution degree | 2 |
| Vibration resistance per IEC 60068-2-6 | 40g, 10 ... 2,000 Hz |
| Permanent vibration resistance per IEC 60068-2-6 | 10g, 10 ... 2,000 Hz |
| Shock resistance per IEC 60068-2-27 | 100g, 11 ms |
| Free fall in line with IEC 60068-2-31 | |
| Single instrument | 1 m[3.28 ft] |
| Multiple packaging | 0.5 m[1.64 ft] |
| Ingress protection (IP code) per IEC 60529 | → See table 'Electrical connection' 6 |
| Service life | > 100 million load cycles |
| EMC | |
| ESD per ISO 10605 | ±8 kV contact discharge, ±15 kV air discharge |
| HF field per ISO 11452-2 | 100 V/m |
| BCI per ISO 11452-4 | 200mA |
| Puls 1 per ISO 7637-2 | Level III |
| Puls 2a per ISO 7637-2 | Level III |
| Puls 2b per ISO 7637-2 | Level III |
| Puls 3a per ISO 7637-2 | Level III |
| Puls 3b per ISO 7637-2 | Level III |
| Fast Transient Pulses per ISO 7637-3 | Level IV |
| Radiation per CISPR 25 | 30 ... 1.000 MHz |
| Packaging | Multiple packaging (up to 25 pieces) |
|---|---|
| Instrument labelling | ■ WIKA product label, lasered ■ Customer-specific product label on request |
| Logo | Description Region |
|---|---|
| EU declaration of conformity | European Union |
| EMCdirective EN 61326 emission (group 1, class B) and immunity (industrial environments) | |
| Pressure equipment directive | |
| UKCA | United Kingdom |
| Electromagnetic compatibility regulations | |
| Pressure equipment (safety) regulations | |
| Restriction of hazardous substances (RoHS) regulations |
| Logo | Description | Region |
|---|---|---|
| UL Component approval | USA and Canada |
| Logo | Description |
|---|---|
| - | MTTF: > 100 years |
| - | China RoHS directive |
Не знайшли відповіді у документації? Інженер відповість впродовж робочого дня.
Запитати інженера →111 стандартних артикулів сімейства MH-4
Якщо знаєте код — оберіть напряму. Якщо ні — користуйтесь конфігуратором у режимі «01».

