- 20 типов центральных процессоров:
- 6 типов центральных процессоров S7-300C (Compact) с интегрированными в операционную систему технологическими функциями и набором встроенных входов и выходов: CPU 312C/ CPU 313C/ CPU 313C-2 DP/ CPU 313C-2 PtP/ CPU 314C-2 DP/ CPU 314C-2 PtP;
- 4 модели центральных процессоров стандартного исполнения: CPU 312/ CPU 314/ CPU 315-2 DP/ CPU 317-2 DP;
- центральные процессоры стандартного исполнения CPU 315-2 PN/DP, CPU 317-2 PN/DP и CPU 319-3 PN/DP с встроенным интерфейсом Industrial Ethernet/ PROFINET;
- центральные процессоры CPU 315T-2 DP и CPU 317T-2 DP с встроенными в операционную систему функциями позиционирования и управления перемещением, набором встроенных входов и выходов, встроенным интерфейсом PROFIBUS DP/ DRIVE;
- 5 центральных процессоров с встроенными в операционную систему функциями противоаварийной защиты и автоматики безопасности: CPU 315F-2 DP, CPU 315F-2 PN/DP, CPU 317F-2 DP, CPU 317F-2 PN/DP и CPU 319F-3 PN/DP.
- Оптимальная адаптация программируемого контроллера S7-300/ S7-300F к требованиям решаемой задачи за счет выбора центрального процессора соответствующей производительности.
Область применения
В зависимости от требуемой производительности системы управления программируемые контроллеры SIMATIC S7-300 могут комплектоваться различными типами центральных процессоров. Широкий модельный ряд центральных процессоров позволяет макимально адаптировать S7-300 к требованиям решаемой задачи как по функциональным возможностям, так и по стоимостным показателям. Новые центральные процессоры SIMATIC S7-300 имеют увеличенную производительность, меньшие габариты, улучшенные эксплуатационные характеристики, что существенно повышает соотношение производительность/ цена.
- Высокая скорость обработки данных: время выполнения логической инструкции 0.01 ... 0.2 мкс, время выполнения математической операции с плавающей запятой - от 0.02 до 6 мкс.
- Увеличенные объемы рабочей памяти: от 32 Кбайт в CPU 312 до 1.4 Мбайт в CPU 319.
- Использование в качестве загружаемой памяти микро карт памяти (ММС) NVFlash-EEPROM емкостью от 64 Кбайт до 8 Мбайт.
- Необслуживаемое сохранение всех данных в ММС при перебоях в питании контроллера.
- Возможность сохранения в ММС архива всего проекта с символьной таблицей и комментариями.
- Работа без буферной батареи.
Центральные процессоры стандартного исполнения:
- CPU 312: центральный процессор для построения для построения небольших систем управления, включающих в сосотав системы локального ввода-вывода до 8 модулей S7-300.
- CPU 314: центральный процессор для построения систем управления, в которых требуется скоростная обработка информации и поддержка систем локального ввода-вывода, включающих в свой состав до 32 модулей S7-300.
- CPU 315-2 DP: центральный процессор с встроенным интерфейсом ведущего/ ведомого устройства PROFIBUS DP для построения высокопроизводительных систем автоматизации с развитой системой локального и распределенного ввода-вывода.
- CPU 315-2 PN/DP: центральный процессор с встроенным интерфейсом Industrial Ethernet и PROFIBUS DP, обеспечивающий поддержку коммуникационного стандарта PROFINET и предназначенный для использования в системах Component Based Automation, а также системах распределенного ввода-вывода на основе PROFINET.
- CPU 317-2 DP: центральный процессор с встроенными интерфейсами MPI/ PROFIBUS DP и PROFIBUS DP, большим объемом памяти программ и данных, высокой производительностью. Предназначен для построения высокопроизводительных систем автоматизации с развитой системой локального и распределенного ввода-вывода.
- CPU 317-2 PN/DP: центральный процессор с встроенным интерфейсом Industrial Ethernet и PROFIBUS DP, обеспечивающий поддержку коммуникационного стандарта PROFINET и предназначенный для использования в системах Component Based Automation, а также системах распределенного ввода-вывода на основе PROFINET.
- CPU 319-3 PN/DP: мощный центральный процессор с высоким быстродействием, большим объемом памяти памяти программ и данных. Оснащен встроенными интерфейсами MPI/DP, PROFIBUS DP и PROFINET. Способен обслуживать развитые системы локального и распределенного ввода-вывода на основе сетей PROFIBUS DP и PROFINET IO, а также работать в системах PROFINET CBA.
Центральные процессоры S7-300 Compact:
- CPU 312C: компактный центральный процессор с 10 дискретными входами и 6 дискретными выходами, а также встроенными функциями скоростного счета (2х10 кГц) и измерения частоты (2х10 кГц) или длительности периода.
- CPU 313C: центральный процессор с 24 дискретными входами, 16 дискретными выходами, 4 аналоговыми входами для измерения унифицированных сигналов силы тока или напряжения, 1 аналоговым входом для подключения датчика температуры Pt100 и 2 аналоговыми выходами. Набор встроенных функций включает в свой состав скоростной счет (3х30 кГц), измерение частоты (3х30 кГц) или длительности периода, ПИД-регулирование.
- CPU 313C-2 PtP: центральный процессор с 16 дискретными входами, 16 дискретными выходами и дополнительным последовательным интерфейсом RS 422/ RS 485. Набор встроенных функций аналогичен CPU 313C.
- CPU 313C-2 DP: центральный процессор с 16 дискретными входами, 16 дискретными выходами и встроенным интерфейсом ведущего/ ведомого устройства PROFIBUS DP. Набор встроенных функций аналогичен CPU 313C.
- CPU 314C-2 PtP: центральный процессор с 24 дискретными входами, 16 дискретными выходами, 4 аналоговыми входами для измерения унифицированных сигналов силы тока или напряжения, 1 аналоговым входом для подключения датчика температуры Pt100, 2 аналоговыми выходами и встроенным последовательным интерфейсом RS 422/ RS 485. Набор встроенных функций включает в свой состав скоростной счет (4х60 кГц), измерение частоты (4х60 кГц) или длительности периода, ПИД-регулирование, позиционирование по одной оси.
- CPU 314C-2 DP: центральный процессор с 24 дискретными входами, 16 дискретными выходами, 4 аналоговыми входами для измерения унифицированных сигналов силы тока или напряжения, 1 аналоговым входом для подключения датчика температуры Pt100, 2 аналоговыми выходами и встроенным интерфейсом ведущего/ ведомого устройства PROFIBUS DP. Набор встроенных функций включает в свой состав скоростной счет (4х60 кГц), измерение частоты (4х60 кГц) или длительности периода, ПИД-регулирование, позиционирование по одной оси.
Все центральные процессоры S7-300 Compact могут использоваться в качестве готовых систем автоматизации.
Центральные процессоры CPU 315T-2 DP/ CPU 317T-2 DP:
- центральные процессоры с набором встроенных входов и выходов, встроенными интерфейсами MPI/ PROFIBUS DP и PROFIBUS DP/ DRIVE, поддерживающий на уровне операционной системы функции позиционирования и управления перемещем.
Центральные процессоры для S7-300F:
- CPU 315F-2 DP: центральный процессор с встроенным интерфейсом PROFIBUS DP для построения F-систем со средними/ высокми требованиями к объему и скорости выполняемых программ, а также обслуживанию систем распределенного ввода-вывода.
- CPU 315F-2 PN/DP: центральный процессор для построения F-систем с встроенным интерфейсом Industrial Ethernet и PROFIBUS DP, обеспечивающий поддержку коммуникационного стандарта PROFINET и предназначенный для использования в системах Component Based Automation, а также системах распределенного ввода-вывода на основе PROFINET.
- CPU 317F-2 DP: центральный процессор с встроенным интерфейсом PROFIBUS DP для построения F-систем с высокми требованиями к объему и скорости выполняемых программ, а также обслуживанию систем распределенного ввода-вывода.
- CPU 317-2 PN/DP: центральный процессор для построения F-систем с встроенным интерфейсом Industrial Ethernet и PROFIBUS DP, обеспечивающий поддержку коммуникационного стандарта PROFINET и предназначенный для использования в системах Component Based Automation, а также системах распределенного ввода-вывода на основе PROFINET.
- CPU 319F-3 PN/DP: мощный центральный процессор для построения F-систем с высоким быстродействием, большим объемом памяти памяти программ и данных. Оснащен встроенными интерфейсами MPI/DP, PROFIBUS DP и PROFINET. Способен обслуживать развитые системы локального и распределенного ввода-вывода на основе сетей PROFIBUS DP и PROFINET IO, а также работать в системах PROFINET CBA.
Дизайн
Все центральные процессоры выпускаются в пластиковых корпусах, на фронтальной панели которых расположены:
Светодиоды индикации состояний и отказов.
Переключатель выбора режимов работы.
Отсек для установки микро карты памяти.
Встроенные интерфейсы, состав которых зависит от типа центрального процессора.
В центральных процессорах S7-300 Compact, CPU 315T-2 DP и CPU 317T-2 DP:
один или два отсека для установки фронтальных соединителей, через которые производится подключение внешних цепей ввода-вывода дискретных и аналоговых сигналов;
светодиоды индикации состояний входных и выходных дискретных сигналов;
защитные пластиковые крышки с пазом для установки этикетки с маркировкой внешних цепей.
Функции
Программирование
Программирование центральных процессоров S7-300 выполняется на зыках LAD, FBD или STL из среды STEP 7, STEP 7 Professional или STEP 7 Lite (не поддерживает сетевые конфигурации).
Кроме того, для программирования S7-300 могут использоваться инструментальные средства проектирования S7-GRAPH, S7-HiGraph, S7-SCL, CFC или SFC. Они могут применяться для программирования контроллеров S7-300 с CPU 314 или более мощными центральными процессорами.
В центральных процессорах с операционной системой от V2.6 и выше обеспечивается возможность обновления операционной системы через сеть.
Технические данные (бумага)
| 6ES7 312-5BD01-0AB0 | 6ES7 313-5BE01-0AB0 | 6ES7 313-6BE01-0AB0 | 6ES7 313-6CE01-0AB0 | 6ES7 314-6BF01-0AB0 | 6ES7 314-6CF01-0AB0 | |
|---|---|---|---|---|---|---|
| Product version | ||||||
| - Associated programming package | STEP 7 as 5.2 + SP 1 | STEP 7 as 5.2 + SP 1 | STEP 7 as of 5.2 + SP 1 (for STEP 7 as of 5.1 + SP 3 please use previous CPU version) | STEP 7 as of 5.2 + SP 1 (for STEP 7 as of 5.1 + SP 3 please use previous CPU version) | STEP 7 as of 5.2 + SP 1 (for STEP 7 as of 5.1 + SP 3 please use previous CPU version) | STEP 7 as of 5.2 + SP 1 (for STEP 7 as of 5.1 + SP 3 please use previous CPU version) |
| Supply voltages | ||||||
| Rated value | ||||||
| - 24 V DC | Yes | Yes | Yes | Yes | Yes | Yes |
| - permissible range, lower limit (DC) | 20.4 V | 20.4 V | 20.4 V | 20.4 V | 20.4 V | 20.4 V |
| - permissible range, upper limit (DC) | 28.8 V | 28.8 V | 28.8 V | 28.8 V | 28.8 V | 28.8 V |
| Current consumption | ||||||
| - Inrush current, typ. | 11 A | 11 A | 11 A | 11 A | 11 A | 11 A |
| - from supply voltage L+, max. | 500 mA | 700 mA | 700 mA | 900 mA | 800 mA | 1,000 mA |
| - Power dissipation, typical | 6 W | 14 W | 10 W | 10 W | 14 W | 14 W |
| Memory/backup | ||||||
| Memory | ||||||
| - Working memory | ||||||
| - integral | 16 KByte; for program and data | 32 KByte; for program and data | 32 KByte; for program and data | 32 KByte; for program and data | 48 KByte; for program and data | 48 KByte; for program and data |
| - expandable | No | No | No | No | No | No |
| - Load memory | ||||||
| - pluggable (MMC) | Yes | Yes | Yes | Yes | Yes | Yes |
| - pluggable (MMC), max. | 4 MByte | 8 MByte | 8 MByte | 8 MByte | 8 MByte | 8 MByte |
| Backup | ||||||
| - available | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) |
| - without battery | Yes; Program and data | Yes; Program and data | Yes; Program and data | Yes; Program and data | Yes; Program and data | Yes; Program and data |
| CPU/blocks | ||||||
| DB | ||||||
| - Number, max. | 511; DB 0 reserved | 511; DB 0 reserved | 511; DB 0 reserved | 511; DB 0 reserved | 511; DB 0 reserved | 511; DB 0 reserved |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte |
| FB | ||||||
| - Number, max. | 512; from FB 0 to FB 511 | 512; from FB 0 to FB 511 | 512; from FB 0 to FB 511 | 512 | 512 | 512 |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte |
| FC | ||||||
| - Number, max. | 512; from FC 0 to FC 511 | 512; from FC 0 to FC 511 | 512; from FC 0 to FC 511 | 512 | 512 | 512 |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte |
| OB | ||||||
| - Number, max. | see instruction list | see instruction list | see instruction list | see instruction list | see instruction list | see instruction list |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte |
| Nesting depth | ||||||
| - per priority class | 8 | 8 | 8 | 8 | 8 | 8 |
| - additional levels within an error OB | 4 | 4 | 4 | 4 | 4 | 4 |
| CPU/processing times | ||||||
| - for bit instruction, min. | 0.2 µs | 0.1 µs | 0.1 µs | 0.1 µs | 0.1 µs | 0.1 µs |
| - for word instruction, min. | 0.4 µs | 0.2 µs | 0.2 µs | 0.2 µs | 0.2 µs | 0.2 µs |
| - for integer math, min. | 5 µs | 2 µs | 2 µs | 2 µs | 2 µs | 2 µs |
| - for floating-point math, min. | 6 µs | 3 µs | 3 µs | 3 µs | 3 µs | 3 µs |
| Timers/counters and their retentive characteristics | ||||||
| S7 counter | ||||||
| - Number | 128 | 256 | 256 | 256 | 256 | 256 |
| - of which retentive without battery | ||||||
| - adjustable | Yes | Yes | Yes | Yes | Yes | Yes |
| - lower limit | 0 | 0 | 0 | 0 | 0 | 0 |
| - upper limit | 128 | 256 | 256 | 256 | 256 | 256 |
| - Retentivity | ||||||
| - adjustable | Yes | |||||
| - Counting range | ||||||
| - lower limit | 0 | 0 | 0 | 0 | 0 | 0 |
| - upper limit | 999 | 999 | 999 | 999 | 999 | 999 |
| IEC counter | ||||||
| - available | Yes | Yes | Yes | Yes | Yes | Yes |
| - Type | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) |
| S7 times | ||||||
| - Number | 128 | 256 | 256 | 256 | 256 | 256 |
| - Retentivity | ||||||
| - adjustable | Yes | Yes | Yes | Yes | Yes | Yes |
| - lower limit | 0 | 0 | 0 | 0 | 0 | 0 |
| - upper limit | 128 | 256 | 256 | 256 | 256 | 256 |
| - preset | No retention | No retention | No retention | No retention | No retention | No retention |
| - Timing range | ||||||
| - lower limit | 10 ms | 10 ms | 10 ms | 10 ms | 10 ms | 10 ms |
| - upper limit | 9,990 s | 9,990 s | 9,990 s | 9,990 s | 9,990 s | 9,990 s |
| IEC timer | ||||||
| - available | Yes | Yes | Yes | Yes | Yes | Yes |
| - Type | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) |
| Data areas and their retentive characteristics | ||||||
| Flags | ||||||
| - Number | 128 Byte | 256 Byte | 256 Byte | 256 Byte | 256 Byte | 256 Byte |
| - adjustable retentivity | Yes; MB 0 to MB 127 | Yes; MB 0 to MB 255 | Yes; MB 0 to MB 255 | Yes; MB 0 to MB 255 | Yes; MB 0 to MB 255 | Yes; MB 0 to MB 255 |
| - Number of clock memories | 8; 1 memory byte | 8; 1 memory byte | 8; 1 memory byte | 8 | 8 | 8 |
| Data blocks | ||||||
| - Number, max. | 511; from DB 1 to DB 511 | 511; from DB 1 to DB 511 | 511; from DB 1 to DB 511 | 511 | 511 | 511 |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte | 16 KByte |
| Local data | ||||||
| - per priority class, max. | 256 Byte | 510 Byte | 510 Byte | 510 Byte | 510 Byte | |
| Address area | ||||||
| I/O address area | ||||||
| - Inputs | 1 KByte | 1 KByte | 1 KByte | 1 KByte | 1 KByte | 1 KByte |
| - Outputs | 1 KByte | 1 KByte | 1 KByte | 1 KByte | 1 KByte | 1 KByte |
| Process image | ||||||
| - Inputs | 128 Byte | 128 Byte | 128 Byte | 128 Byte | 128 Byte | 128 Byte |
| - Outputs | 128 Byte | 128 Byte | 128 Byte | 128 Byte | 128 Byte | 128 Byte |
| Digital channels | ||||||
| - Inputs | 256 | 992 | 1,008 | 8,192 | 992 | 992 |
| - Outputs | 256 | 992 | 1,008 | 8,192 | 992 | 992 |
| - Inputs, of which central | 256 | 992 | 992 | 992 | 992 | 992 |
| - Outputs, of which central | 256 | 992 | 992 | 992 | 992 | 992 |
| Analog channels | ||||||
| - Inputs | 64 | 248 | 248 | 248 | 253 | 512 |
| - Outputs | 32 | 124 | 124 | 124 | 124 | 124 |
| - Inputs, of which central | 248 | 248 | 248 | 248 | 248 | |
| - Outputs, of which central | 248 | 248 | 248 | 248 | 248 | |
| Configuration | ||||||
| - Central units, max. | 1 | 1 | 1 | 1 | 1 | 1 |
| - Expansion units, max. | 0 | 3 | 3 | 3 | 3 | 3 |
| - Racks, max. | 1 | 4 | 4 | 4 | 4 | 4 |
| - Modules per rack, max. | 8 | 8; in rack 3 max. 7 | 8; in rack 3 max. 7 | 8; in rack 3 max. 7 | 8; in rack 3 max. 7 | 8; in rack 3 max. 7 |
| Number of DP masters | ||||||
| - integral | no | no | no | 1 | 1 | |
| - via CP | 1 | 2 | 1 | 1 | 1 | 1 |
| Number of FMs and CPs that can be operated (recommendation) | ||||||
| - FM | 8 | 8 | 8 | 8 | 8 | 8 |
| - CP, point-to-point | 8 | 8 | 8 | 8 | 8 | 8 |
| - CP, LAN | 4 | 6 | 6 | 6 | 10 | 10 |
| Time | ||||||
| Clock | ||||||
| - Hardware clock (realtime clock) | Yes | Yes | Yes | Yes | Yes | |
| - Software clock | Yes | |||||
| - buffered | No | Yes | Yes | Yes | Yes | Yes |
| - Deviation per day, max | 10 s | 10 s | 10 s | 10 s | 10 s | |
| Run-time meter | ||||||
| - Quantity | 1 | 1 | 1 | 1 | 1 | 1 |
| - Number | 0 | 0 | 0 | 0 | 0 | 0 |
| - Range of values | 2^31 hours (when using SFC 101) | 2^31 hours (when using SFC 101) | 2^31 hours (when using SFC 101) | 2^31 hours (when using SFC 101) | 2^31 hours (when using SFC 101) | 2^31 hours (when using SFC 101) |
| - Granularity | 1 hour | 1 hour | 1 hour | 1 hour | 1 hour | 1 hour |
| - retentive | Yes; must be restarted on each complete restart | Yes; must be restarted on each complete restart | Yes; must be restarted on each complete restart | Yes | Yes | Yes |
| Time synchronization | ||||||
| - supported | Yes | Yes | Yes | Yes | Yes | Yes |
| - on MPI, master | Yes | Yes | Yes | Yes | Yes | Yes |
| - on MPI, slave | Yes | Yes | Yes | Yes | Yes | Yes |
| - in AS, master | Yes | Yes | Yes | Yes | Yes | Yes |
| S7 message functions | ||||||
| - Number of stations that can log on for message functions, max. | 6; depending on the connections configured for PG/OP and S7 basic communication | 8; depending on the connections configured for PG/OP and S7 basic communication | 8; depending on the connections configured for PG/OP and S7 basic communication | 8 | 12 | 12 |
| - Process diagnostic messages | Yes | Yes | Yes | Yes | Yes | Yes |
| - simultaneously active Alarm-S blocks, max. | 20 | 20 | 20 | 20 | 40 | 40 |
| Test and startup functions | ||||||
| Status/modify | ||||||
| - Variable | Yes | Yes | Yes | Yes | Yes | Yes |
| - Variables | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters |
| - Number of variables, max. | 30 | 30 | 30 | 30 | 30 | 30 |
| - of which status variables, max. | 30 | 30 | 30 | 30 | 30 | 30 |
| - of which modify variables, max. | 14 | 14 | 14 | 14 | 14 | 14 |
| Forcing | ||||||
| - Forcing | Yes | Yes | Yes | Yes | Yes | Yes |
| - Forcing, variables | Inputs, outputs | Inputs, outputs | Inputs, outputs | Inputs, outputs | Inputs, outputs | Inputs, outputs |
| - Forcing, number of variables, max. | 10 | 10 | 10 | 10 | 10 | 10 |
| - Status block | Yes | Yes | Yes | Yes | Yes | Yes |
| - Single step | Yes | Yes | Yes | Yes | Yes | Yes |
| - Number of breakpoints | 2 | 2 | 2 | 2 | 2 | 2 |
| Communication functions | ||||||
| - PG/OP communication | Yes | Yes | Yes | Yes | Yes | Yes |
| - Routing | Yes | |||||
| Global data communication | ||||||
| - supported | Yes | Yes | Yes | Yes | Yes | Yes |
| - Size of GD packets, max. | 22 Byte | 22 Byte | 22 Byte | 22 Byte | 22 Byte | 22 Byte |
| S7 basic communication | ||||||
| - supported | Yes | Yes | Yes; Server | Yes | Yes | Yes |
| S7 communication | ||||||
| - supported | Yes | Yes | Yes | Yes | Yes | Yes |
| S5 compatible communication | ||||||
| - supported | Yes; via CP and loadable FC | Yes; via CP and loadable FC | Yes; via CP and loadable FC | Yes | Yes | Yes |
| Number of connections | ||||||
| - overall | 6 | 8 | 8 | 8 | 12 | 12 |
| - usable for PG communication | 5 | 7 | 7 | 7 | 11 | 11 |
| - usable for OP communication | 5 | 7 | 7 | 7 | 11 | 11 |
| - usable for S7 basic communication | 2 | 4 | 4 | 4 | 8 | 8 |
| - usable for routing | no | no | no | 4 | 4 | |
| Connection system | ||||||
| - Requisite front connector | 1 x 40-pin | 2 x 40 pin | 1 x 40-pin | 1 x 40-pin | 2 x 40 pin | 2 x 40 pin |
| MPI | ||||||
| - Length of cable, max. | 50 m; without repeaters | 50 m; without repeaters | 50 m; without repeaters | 50 m; without repeaters | 50 m; without repeaters | 50 m; without repeaters |
| Point-to-point | ||||||
| - Length of cable, max. | 1,200 m | 1,200 m | ||||
| Integral protocol driver | ||||||
| - 3964 (R) | Yes | Yes | ||||
| - ASCII | Yes | Yes | ||||
| - RK512 | Yes | |||||
| Transmission rate, RS 422/485 | ||||||
| - with 3964 (R) protocol, max. | 19.2 kBit/s | 19.2 kBit/s | ||||
| - with ASCII protocol, max. | 19.2 kBit/s | 19.2 kBit/s | ||||
| - with RK 512 protocol, max. | 19.2 kBit/s | |||||
| 1st interface | ||||||
| - Type of interface | integrated RS 485 interface | integrated RS 485 interface | integrated RS 485 interface | integrated RS 485 interface | Integrial RS 485 interface | integrated RS 485 interface |
| - Physical | RS 485 | RS 485 | RS 485 | RS 485 | RS 485 | RS 485 |
| - Isolated | No | No | No | Yes | No | No |
| - Power supply to interface (15 to 30 V DC), max. | 200 mA | 200 mA | 200 mA | 200 mA | 200 mA | 200 mA |
| Functionality | ||||||
| - MPI | Yes | Yes | Yes | Yes | Yes | Yes |
| - DP master | No | No | No | No | No | No |
| - DP slave | No | No | No | No | No | No |
| - Point-to-point connection | No | No | No | No | No | No |
| MPI | ||||||
| - Number of connections | 6 | 8 | 8 | 8 | 12 | 12 |
| - Services | ||||||
| - PG/OP communication | Yes | Yes | Yes | Yes | Yes | Yes |
| - Routing | No | No | No | Yes | No | Yes |
| - Global data communication | Yes | Yes | Yes | Yes | Yes | Yes |
| - S7 basic communication | Yes | Yes | Yes | Yes | Yes | |
| - S7 communication | Yes | Yes | Yes | Yes | Yes | Yes |
| - S7 communication, as client | No | No; via CP and loadable FB | No; via CP and loadable FB | No | No | No |
| - S7 communication, as server | Yes | Yes | Yes | Yes | Yes | Yes |
| - Transmission rates, max. | 187.5 kBit/s | 187.5 kBit/s | 187.5 kBit/s | 187.5 kBit/s | 187.5 kBit/s | 187.5 kBit/s |
| 2nd interface | ||||||
| - Type of interface | integrated RS 422/ 485 interface | integrated RS 485 interface | integrated RS 422/ 485 interface | integrated RS 485 interface | ||
| - Physical | RS422 / RS 485 (X.27) | RS 485 | RS422 / RS 485 (X.27) | RS 485 | ||
| - Isolated | Yes | Yes | Yes | Yes | ||
| - Power supply to interface (15 to 30 V DC), max. | no | 200 mA | 200 mA | |||
| Functionality | ||||||
| - MPI | No | No | No | No | ||
| - DP master | No | Yes | No | Yes | ||
| - DP slave | No | Yes | No | Yes | ||
| - Point-to-point connection | Yes | No | Yes | No | ||
| DP master | ||||||
| - Number of connections, max. | 8; for PG/OP communication | 12; for PG/OP communication | ||||
| - Number of connections (of which reserved), max. | 1 for PG, 1 for OP | 1 for PG, 1 for OP | ||||
| - Services | ||||||
| - PG/OP communication | Yes | Yes | ||||
| - Routing | Yes | Yes | ||||
| - Global data communication | No | No | ||||
| - S7 basic communication | No | No | ||||
| - S7 communication | No | No | ||||
| - S7 communication, as client | No | No | ||||
| - S7 communication, as server | No | No | ||||
| - Equidistance support | Yes | Yes | ||||
| - SYNC/FREEZE | Yes | Yes | ||||
| - Activate/deactivate DP slaves | Yes | Yes | ||||
| - Direct data exchange (lateral communication) | Yes | Yes | ||||
| - DPV1 | Yes | Yes | ||||
| - Transmission rates, max. | - | 12 Mbit/s | 12 Mbit/s | |||
| - Number of DP slaves, max. | - | 32 | 32 | |||
| - Address area | ||||||
| - Inputs, max. | 1 KByte | 1 KByte | ||||
| - Outputs, max. | 1 KByte | 1 KByte | ||||
| - User data per DP Slave | ||||||
| - Inputs, max. | 244 Byte | 244 Byte | ||||
| - Outputs, max. | 244 Byte | 244 Byte | ||||
| DP slave | ||||||
| - Number of connections | - | 8 | 12 | |||
| - Services | ||||||
| - PG/OP communication | Yes | Yes | ||||
| - Routing | Yes | Yes | ||||
| - Global data communication | No | No | ||||
| - S7 basic communication | No | No | ||||
| - Direct data exchange (lateral communication) | Yes | Yes | ||||
| - DPV1 | No | No | ||||
| - GSD file | - | Current GSD - The file is available at http://www.ad.siemens.de/support under Product Support | - | Current GSD - The file is available at http://www.ad.siemens.de/support under Product Support | ||
| - Transmission rates, max. | - | 12 kBit/s | 12 kBit/s | |||
| - Automatic baud rates search | Yes | Yes | ||||
| - Intermediate memory | ||||||
| - Inputs | 244 Byte | 244 Byte | ||||
| - Outputs | 244 Byte | 244 Byte | ||||
| - Address areas, max. | 32 | 32 | ||||
| - User data per address area, max. | 32 Byte | 32 Byte | ||||
| Point-to-point coupling | ||||||
| - Transmission rates, max. | 38.4 kBaud half duplex 19.2 kBaud full duplex | 38.4 kBit/s | ||||
| - Length of cable, max. | 1,200 m | 1,200 m | ||||
| - Controllable interface from the user program | Yes | Yes | ||||
| - Interface can activate alarm/interrupt in the user program | Yes; Message for Break ID | Yes | ||||
| - Protocol driver | 3964 (R); ASCII | 3964 (R); ASCII and RK 512 | ||||
| CPU/ programming | ||||||
| Programming language | ||||||
| - STEP 7 | Yes; V5.1 SP2 | Yes; V5.1 SP2 | Yes; V5.1 SP2 | Yes; V5.1 SP2 | Yes; V5.1 SP2 | Yes; V5.1 SP2 |
| - LAD | Yes | Yes | Yes | Yes | Yes | Yes |
| - FBD | Yes | Yes | Yes | Yes | Yes | Yes |
| - STL | Yes | Yes | Yes | Yes | Yes | Yes |
| - SCL | Yes | Yes | Yes | Yes | Yes | Yes |
| - CFC | Yes | Yes | ||||
| - GRAPH | Yes | Yes | Yes | Yes | Yes | Yes |
| - HiGraph® | Yes | Yes | Yes | Yes | Yes | Yes |
| Software library | ||||||
| - Instruction set | See instruction list | See instruction list | See instruction list | See instruction list | See instruction list | See instruction list |
| - Bracket levels | 8 | 8 | 8 | 8 | 8 | 8 |
| - User program protection/password protection | Yes | Yes | Yes | Yes | Yes | Yes |
| - System functions (SFC) | See instruction list | See instruction list | See instruction list | See instruction list | See instruction list | See instruction list |
| - System function blocks (SFB) | see instruction list | see instruction list | see instruction list | see instruction list | see instruction list | see instruction list |
| Digital inputs | ||||||
| - Number of digital inputs | 10 | 24 | 16 | 16 | 24 | 24 |
| Length of cable | ||||||
| - Length of cable shielded, max | 1,000 m; 100 m for technological functions | 1,000 m; 100 m for technological functions | 1,000 m; 100 m for technological functions | 1,000 m; 100 m for technological functions | 1,000 m; 100 m for technological functions | 1,000 m; 100 m for technological functions |
| - Length of cable unshielded, max | 600 m | 600 m | 600 m | 600 m | 600 m | 600 m |
| Input voltage | ||||||
| - Rated value, DC | 24 V | 24 V | 24 V | 24 V | 24 V | 24 V |
| - for signal "0" | -3 to 5 V | -3 to 5 V | -3 to 5 V | -3 to 5 V | -3 to 5 V | -3 to 5 V |
| - for signal "1" | 15 to 30 V | 15 to 30 V | 15 to 30 V | 15 to 30 V | 15 to 30 V | 15 to 30 V |
| Input current | ||||||
| - for 1 signal, typical | 8 mA | 8 mA | 8 mA | 8 mA | 8 mA | 8 mA |
| Input delay (at rated value of the input voltage) | ||||||
| - For standard inputs | ||||||
| - Parameterizable | Yes; 0.1 / 0.3 / 3 / 15 ms | Yes; 0.1 / 0.3 / 3 / 15 ms | Yes; 0.1 / 0.3 / 3 / 15 ms | Yes; 0.1 / 0.3 / 3 / 15 ms | Yes; 0.1 / 0.3 / 3 / 15 ms | Yes; 0.1 / 0.3 / 3 / 15 ms |
| - for counters/technological functions | ||||||
| - at 0 after 1, max. | 50 µs | 16 µs | 8 µs | 8 µs | 8 µs | 8 µs |
| Digital outputs | ||||||
| - Number of digital outputs | 6 | 16 | 16 | 16 | 16 | 16 |
| - Length of cable shielded, max. | 1,000 m | 1,000 m | 1,000 m | 1,000 m | 1,000 m | 1,000 m |
| - Length of cable unshielded, max. | 600 m | 600 m | 600 m | 600 m | 600 m | 600 m |
| - Short-circuit protection of the output | Yes; clocking electronically | Yes; clocking electronically | Yes; clocking electronically | Yes; clocking electronically | Yes; clocking electronically | Yes; clocking electronically |
| - Limitation of voltage induced on circuit interruption to | L+ (-48 V) | L+ (-48 V) | L+ (-48 V) | L+ (-48 V) | L+ (-48 V) | L+ (-48 V) |
| Output voltage | ||||||
| - for 1 signal | L+ (-0.8 V) | L+ (-0.8 V) | L+ (-0.8 V) | L+ (-0.8 V) | L+ (-0.8 V) | L+ (-0.8 V) |
| Output current | ||||||
| - for 1 signal permissible range for 0 to 40 °C, max. | 500 mA | 500 mA | 500 mA | 500 mA | 500 mA | 500 mA |
| - for 1 signal permissible range for 0 to 60 °C, max. | 500 mA | 500 mA | 500 mA | 500 mA | 500 mA | 500 mA |
| - for 1 signal minimum load current | 5 mA | 5 mA | 5 mA | 5 mA | 5 mA | 5 mA |
| - for 0 signal residual current, max. | 0.5 mA | 0.5 mA | 0.5 mA | 0.5 mA | 0.5 mA | 0.5 mA |
| Switching frequency | ||||||
| - at resistive load, max. | 100 Hz | 100 Hz | 100 Hz | 100 Hz | 100 Hz | 100 Hz |
| - at inductive load, max. | 0.5 Hz | 0.5 Hz | 0.5 Hz | 0.5 Hz | 0.5 Hz | 0.5 Hz |
| Summation current of the outputs (per group) | ||||||
| - horizontal mounting positions | ||||||
| - up to 40 °C, max. | 3 A | 8 A | 8 A | 8 A | 8 A | 8 A |
| - up to 60 °C, max. | 1.5 A | 4 A | 4 A | 4 A | 4 A | 4 A |
| Analog inputs | ||||||
| - Number of analog inputs for voltage/current measurement | 4 | 4 | 4 | |||
| - Number of analog inputs for resistance/temperature measurement) | 1 | 1 | 1 | |||
| - Technical unit for temperature measurement, adjustable | Yes | Yes | Yes | |||
| Input ranges (rated values), voltages | ||||||
| - 0 to +10 V | Yes | Yes | Yes | |||
| - -10 V to +10 V | Yes | Yes | Yes | |||
| Input ranges (rated values), currents | ||||||
| - 0 to 20 mA | Yes | Yes | Yes | |||
| - -20 to +20 mA | Yes | Yes | Yes | |||
| - 4 to 20 mA | Yes | Yes | Yes | |||
| Input ranges (rated values), resistances | ||||||
| - 0 to 600 ohms | Yes | Yes | Yes | |||
| Input ranges (rated values), resistance thermometer | ||||||
| - Pt 100 | Yes | Yes | Yes | |||
| Analog outputs | ||||||
| - Number of analog outputs | 2 | 2 | 2 | |||
| Output ranges, voltage | ||||||
| - 0 to 10 V | Yes | Yes | Yes | |||
| - -10 to +10 V | Yes | Yes | Yes | |||
| Output ranges, current | ||||||
| - 0 to 20 mA | Yes | Yes | Yes | |||
| - -20 to +20 mA | Yes | Yes | Yes | |||
| - 4 to 20 mA | Yes | Yes | Yes | |||
| Analog value formation | ||||||
| Integration and conversion time/triggering per channel | ||||||
| - with over-range (bits incl. sign), max | 12 Bit | 12 Bit | 12 Bit | |||
| - Integration time parameterizable | Yes; 2.5 / 16.6 / 20 ms | Yes; 2.5 / 16.6 / 20 ms | Yes; 2.5 / 16.6 / 20 ms | |||
| - Conversion time (per channel) | 1 ms | 1 ms | 1 ms | |||
| Sensor | ||||||
| Connectable encoders | ||||||
| - 2-wire BEROS | Yes | Yes | Yes | Yes | Yes | Yes |
| - permissible closed-circuit current (2-wire BEROS), max. | 1.5 mA | 1.5 mA | 1.5 mA | 1.5 mA | 1.5 mA | 1.5 mA |
| Error/accuracies | ||||||
| Basic error limit (operational limit at 25 °C) | ||||||
| - relative to the output range, voltage | +/- 0,7 % | +/- 0,7 % | +/- 0,7 % | |||
| - relative to the output range, current | +/- 0,7 % | +/- 0,7 % | +/- 0,7 % | |||
| - relative to the input range, voltage | +/- 0,7 % | +/- 0,7 % | +/- 0,7 % | |||
| - relative to the input range, current | +/- 0,7 % | +/- 0,7 % | +/- 0,7 % | |||
| - relative to the input range, resistance | +/- 3 % | +/- 3 % | +/- 3 % | |||
| - relative to the input range, resistance thermometer | +/- 3 % | +/- 3 % | +/- 3 % | |||
| Integral functions | ||||||
| - Number of counters | 2; 2 channels (see "Technological Functions" manual) | 3; 3 channels (see "Technological Functions" manual) | 3; 3 channels (see "Technological Functions" manual) | 3 | 4 | 4 |
| - Count frequency (counters) max. | 10 kHz | 30 kHz | 30 kHz | 30 kHz | 60 kHz | 60 kHz |
| - Frequency measurement | Yes | Yes | Yes | Yes | Yes | Yes |
| - Controlled positioning | No | No | No | No | Yes | Yes |
| - PID controller | No | Yes | Yes | Yes | Yes | Yes |
| - Number of pulse outputs | 2; 2 channels pulse width modulation up to max. 2.5 kHz (see "Technological Functions" manual) | 3; 3 channels pulse width modulation up to max. 2.5 kHz (see "Technological Functions" manual) | 3; 3 channels pulse width modulation up to max. 2.5kHz (see "Technological Functions" manual) | 3 | 4 | 4 |
| - Cut-off frequency (pulse) | 2.5 kHz | 2.5 kHz | 2.5 kHz | 2.5 kHz | 2.5 kHz | 2.5 kHz |
| Potentials/ electrical isolation | ||||||
| Analog output functions | ||||||
| - Electrical isolation, analog output functions | Yes; common for analog I/O | Yes; common for analog I/O | Yes; common for analog I/O | |||
| - between the channels and the backplane bus | Yes | Yes | Yes | |||
| Analog output functions | ||||||
| - Electrical isolation, analog inputs | Yes; common for analog I/O | Yes; common for analog I/O | Yes; common for analog I/O | |||
| - between the channels and the backplane bus | Yes | Yes | Yes | |||
| Digital output functions | ||||||
| - Electrical isolation, digital output functions | Yes | Yes | Yes | Yes | Yes | Yes |
| - between the channels, in groups of | 6 | 8 | 8 | 8 | 8 | 8 |
| - between the channels and the backplane bus | Yes | Yes | Yes | Yes | Yes | Yes |
| Digital input functions | ||||||
| - Electrical isolation, digital input functions | Yes | Yes | Yes | Yes | Yes | Yes |
| - between the channels, in groups of | 10 | 16; and 8 | 16 | 16 | 16 | 16 |
| - between the channels and the backplane bus | Yes | Yes | Yes | Yes | Yes | Yes |
| Dimensions and weight | ||||||
| - Weight, approx. | 409 g | 660 g | 566 g | 566 g | 676 g | 676 g |
| - Width | 80 mm | 120 mm | 120 mm | 120 mm | 120 mm | 120 mm |
| - Height | 125 mm | 125 mm | 125 mm | 125 mm | 125 mm | 125 mm |
| - Depth | 130 mm | 130 mm | 130 mm | 130 mm | 130 mm | 130 mm |
| 6ES7 312-1AD10-0AB0 | 6ES7 314-1AF10-0AB0 | 6ES7 315-2AG10-0AB0 | 6ES7 317-2AJ10-0AB0 | 6ES7 318-2AJ00-0AB0 | |
|---|---|---|---|---|---|
| Product version | |||||
| - Associated programming package | STEP 7 as of 5.1 + SP 4 | STEP 7 as of 5.1 + SP 4 | STEP 7 as of 5.1 + SP 4 | STEP 7 as 5.2 + SP 1 | STEP 7 V 5.1 + Sevice Pack 02 |
| Supply voltages | |||||
| Rated value | |||||
| - 24 V DC | Yes | Yes | Yes | Yes | Yes |
| - permissible range, lower limit (DC) | 20,4 V | 20,4 V | 20,4 V | 20,4 V | 20,4 V |
| - permissible range, upper limit (DC) | 28,8 V | 28,8 V | 28,8 V | 28,8 V | 28,8 V |
| Voltages and currents | |||||
| - External fusing for supply lines (recommendation) | Min. 2 A | Min. 2 A | Min. 2 A | Min. 2 A | LS switch; 2 A, Type B or C |
| Current consumption | |||||
| - Inrush current, max. | 12 A | ||||
| - Inrush current, typ. | 2,5 A | 2,5 A | 2,5 A | 2,5 A | 8 A |
| - I²t | 0,5 A²s | 0,5 A²s | 0,5 A²s | 1 A²s | |
| - from supply voltage L+, max. | 600 mA | 600 mA | 800 mA | i | |
| - Power dissipation, typical | 2,5 W | 2,5 W | 2,5 W | 4 W | 12 W |
| Memory/backup | |||||
| Memory | |||||
| - Working memory | |||||
| - integral | 16 KByte | 48 KByte | 128 KByte | 512 KByte | 512 KByte |
| - expandable | No | No | No | No | |
| - Load memory | |||||
| - pluggable (MMC) | Yes | Yes | Yes | Yes | |
| - pluggable (MMC), max. | 4 MByte | 8 MByte | 8 MByte | 8 MByte | |
| - expandable FEPROM | Yes | ||||
| - expandable FEPROM, max. | 4 MByte | ||||
| - integral RAM, max. | 64 KByte | ||||
| - expandable RAM | Yes | ||||
| - expandable RAM, max | 2 MByte | ||||
| Backup | |||||
| - available | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) | Yes |
| - with battery | Yes; all blocks | ||||
| - without battery | Yes; 11 Kbytes | ||||
| CPU/blocks | |||||
| DB | |||||
| - Number, max. | 511; DB 0 reserved | 511; DB 0 reserved | 1.024; DB 0 reserved | 2.047; DB 0 reserved | 2.047; DB0 reserved |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte | 64 KByte | 64 KByte |
| FB | |||||
| - Number, max. | 512; see instruction list | 512; see instruction list | 2.048; see instruction list | 2.048; see instruction list | 1.024; see instruction list |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte | 64 KByte | 64 KByte |
| FC | |||||
| - Number, max. | 512; See instruction list | 512; see instruction list | 2.048; See instruction list | 2.048; see instruction list | 1.024; see instruction list |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte | 64 KByte | 64 KByte |
| OB | |||||
| - Number, max. | see instruction list | see instruction list | see instruction list | see instruction list | |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte | 64 KByte | 64 KByte |
| Nesting depth | |||||
| - per priority class | 8 | 8 | 8 | 16 | 16 |
| - additional levels within an error OB | 4 | 4 | 4 | 4 | 3 |
| CPU/processing times | |||||
| - for bit instruction, min. | 0,2 µs | 0,1 µs | 0,1 µs | 0,05 µs | 0,1 µs |
| - for word instruction, min. | 0,4 µs | 0,2 µs | 0,2 µs | 0,2 µs | 0,1 µs |
| - for integer math, min. | 5 µs | 2 µs | 2 µs | 0,2 µs | 0,1 µs |
| - for floating-point math, min. | 6 µs | 3 µs | 3 µs | 1 µs | 0,6 µs |
| - for timing/counting instructions, min. | 0,1 µs | ||||
| Timers/counters and their retentive characteristics | |||||
| S7 counter | |||||
| - Number | 128 | 256 | 256 | 512 | 512 |
| - of which retentive without battery | |||||
| - adjustable | Yes | Yes | Yes | Yes | Yes |
| - Retentivity | |||||
| - adjustable | Yes | Yes | Yes | ||
| - Counting range | |||||
| - adjustable | Yes | Yes | Yes | Yes | |
| - lower limit | 0 | 0 | 0 | 0 | 0 |
| - upper limit | 999 | 999 | 999 | 999 | 999 |
| IEC counter | |||||
| - available | Yes | Yes | Yes | Yes | Yes |
| - Type | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) |
| S7 times | |||||
| - Number | 128 | 256 | 256 | 512 | 512 |
| - Retentivity | |||||
| - adjustable | Yes | Yes | Yes | Yes | Yes |
| - preset | No retention | No retention | No retention | No retention | no timers retentive |
| - Timing range | |||||
| - lower limit | 10 ms | 10 ms | 10 ms | 10 ms | 10 ms |
| - upper limit | 9.990 s | 9.990 s | 9.990 s | 9.990 s | 9.990 s |
| IEC timer | |||||
| - available | Yes | Yes | Yes | Yes | Yes |
| - Type | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) |
| Data areas and their retentive characteristics | |||||
| Flags | |||||
| - Number | 128 Byte | 256 Byte | 2.048 Byte | 4.096 Byte | 8 MByte |
| - adjustable retentivity | Yes; MB 0 to MB 127 | Yes; MB 0 to MB 255 | Yes; MB 0 to MB 2047 | Yes; MB 0 to MB 4095 | Yes; MB 0 to MB 1023 |
| - Number of clock memories | 8; 1 memory byte | 8; 1 memory byte | 8; 1 memory byte | 8; 1 memory byte | 8; 1 memory byte |
| Data blocks | |||||
| - Number, max. | 511; from DB 1 to DB 511 | 511; from DB 1 to DB 511 | 1.023; from DB 1 to DB 1023 | 2.047; from DB 1 to DB 2047 | 2.047 |
| - Size, max. | 16 KByte | 16 KByte | 16 KByte; Local data size: max. 1024 bytes per sequence level/ 510 bytes per block | 64 KByte | 64 KByte |
| - adjustable retentivity | Non-Retain support (adjustable retentivity) | ||||
| Local data | |||||
| - adjustable, max. | 8.192 Byte | ||||
| - preset | 3.584 Byte | ||||
| - per priority class, max. | 256 Byte | 510 Byte | 128 Byte | 1.024 Byte | 8.192 Byte |
| Address area | |||||
| I/O address area | |||||
| - Inputs | 1 KByte | 1 KByte | 2 KByte | 8 KByte | 8 KByte |
| - Outputs | 1 KByte | 1 KByte | 2 KByte | 8 KByte | 8 KByte |
| - of which distributed | |||||
| - Inputs | 2 KByte | 8.192 Byte | 8 KByte | ||
| - Outputs | 2 KByte | 8.192 Byte | 8 KByte | ||
| Process image | |||||
| - Inputs | 128 Byte | 128 Byte | 128 Byte | 256 Byte | 2.048 Byte |
| - Outputs | 128 Byte | 128 Byte | 128 Byte | 256 Byte | 2.048 Byte |
| - Inputs, preset | 256 Byte | ||||
| - Outputs, preset | 256 Byte | ||||
| Digital channels | |||||
| - Inputs | 256 | 1.024 | 16.384 | 65.536 | 65.536 |
| - Outputs | 256 | 1.024 | 16.384 | 65.536 | 65.536 |
| - Inputs, of which central | 256 | 1.024 | 1.024 | 1.024 | 1.024 |
| - Outputs, of which central | 256 | 1.024 | 1.024 | 1.024 | 1.024 |
| Analog channels | |||||
| - Inputs | 64 | 256 | 1.024 | 4.096 | 4.096 |
| - Outputs | 64 | 256 | 1.024 | 4.096 | 4.096 |
| - Inputs, of which central | 64 | 256 | 256 | 256 | 256 |
| - Outputs, of which central | 64 | 256 | 256 | 256 | 128 |
| Configuration | |||||
| - Central units, max. | 1 | ||||
| - Expansion units, max. | 3 | ||||
| - Racks, max. | 1 | 4 | 4 | 4 | 4 |
| - Modules per rack, max. | 8 | 8 | 8 | 8 | 8 |
| Number of DP masters | |||||
| - integral | 0 | 0 | 1 | 2 | 2 |
| - via CP | 1 | 1 | 1 | 2 | 2; CP 342-5 |
| Number of FMs and CPs that can be operated (recommendation) | |||||
| - FM | 8 | 8 | 8 | 8 | 16 |
| - CP, point-to-point | 8 | 8 | 8 | 8 | 8 |
| - CP, LAN | 4 | 10 | 10 | 10 | 16 |
| Time | |||||
| Clock | |||||
| - Hardware clock (realtime clock) | Yes | Yes | Yes | Yes | |
| - Software clock | Yes | ||||
| - buffered | No | Yes | Yes | Yes | Yes |
| - Deviation per day, max | 15 s | 10 s | 10 s | 10 s | 10 s |
| Run-time meter | |||||
| - Quantity | 1 | 1 | 1 | 4 | 8 |
| - Number | 0 | 0 | 0 | 0 to 3 | 0 to 7 |
| - Range of values | 0 to 2^31 hours (when using SFC 101) | 0 to 2^31 hours (when using SFC 101) | 0 to 2^31 hours (when using SFC 101) | 0 to 2^31 hours (when using SFC 101) | 0 to 32767 hours |
| - Granularity | 1 hour | 1 hour | 1 hour | 1 hour | 1 hour |
| - retentive | Yes; must be restarted on each complete restart | Yes; must be restarted on each complete restart | Yes; must be restarted on each complete restart | Yes; must be restarted on each complete restart | Yes |
| Time synchronization | |||||
| - supported | Yes | Yes | Yes | Yes | Yes |
| - on MPI, master | Yes | Yes | Yes | Yes | Yes |
| - on MPI, slave | Yes | Yes | Yes | Yes | Yes |
| - in AS, master | Yes | Yes | Yes | Yes | Yes |
| - in AS, slave | Yes | Yes | |||
| S7 message functions | |||||
| - Number of stations that can log on for message functions, max. | 6; depending on the connections configured for PG/OP and S7 basic communication | 12; depending on the connections configured for PG/OP and S7 basic communication | 16; depending on the connections configured for PG/OP and S7 basic communication | 32; depending on the connections configured for PG/OP and S7 basic communication | |
| - Process diagnostic messages | Yes | Yes | Yes | Yes | Yes |
| - simultaneously active Alarm-S blocks, max. | 20 | 40 | 40 | 60 | 100 |
| Test and startup functions | |||||
| Status/modify | |||||
| - Variable | Yes | Yes | Yes | Yes | Yes |
| - Variables | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters |
| - Number of variables, max. | 30 | 30 | 30 | 30 | 70 |
| - of which status variables, max. | 30 | 30 | 30 | 30 | |
| - of which modify variables, max. | 14 | 14 | 40 | 14 | |
| Forcing | |||||
| - Forcing | Yes | Yes | Yes | Yes | Yes |
| - Forcing, variables | Inputs, outputs | Inputs, outputs | Inputs, outputs | Inputs, outputs | Inputs, outputs, memory markers, distributed inputs, distributed outputs |
| - Forcing, number of variables, max. | 10 | 10 | 10 | 10 | 256 |
| - Status block | Yes | Yes | Yes | Yes | Yes |
| - Single step | Yes | Yes | Yes | Yes | Yes |
| - Number of breakpoints | 2 | 2 | 2 | 2 | 4 |
| Diagnostic buffer | |||||
| - available | Yes | Yes | Yes | Yes | Yes |
| - Number of inputs, max. | 100 | 100 | 200 | 100 | 100 |
| - adjustable | No | No | No | No | No |
| Communication functions | |||||
| - PG/OP communication | Yes | Yes | Yes | Yes | Yes |
| - Routing | No | No | Yes | Yes | Yes |
| Global data communication | |||||
| - supported | Yes | Yes | Yes | Yes | Yes |
| - Size of GD packets, max. | 22 Byte | 22 Byte | 22 Byte | 22 Byte | 54 Byte |
| S7 basic communication | |||||
| - supported | Yes | Yes | Yes | Yes | Yes |
| S7 communication | |||||
| - supported | Yes | Yes | Yes | Yes | Yes |
| S5 compatible communication | |||||
| - supported | Yes; via CP and loadable FC | Yes; via CP and loadable FC | Yes; via CP and loadable FC | Yes; via CP and loadable FC | Yes; via CP and loadable FC |
| Standard communication | |||||
| - Supported | Yes; via CP and loadable FC | ||||
| Number of connections | |||||
| - overall | 6 | 12 | 16 | 32 | 32 |
| - usable for PG communication | 5 | 11 | 15 | 31 | 31 |
| - usable for OP communication | 5 | 11 | 15 | 31 | 31 |
| - usable for S7 basic communication | 2 | 8 | 12 | 30 | 30 |
| - usable for S7 communication | 30 | ||||
| - usable for routing | 4 | 8 | |||
| 1st interface | |||||
| - Type of interface | integrated RS 485 interface | integrated RS 485 interface | integrated RS 485 interface | integrated RS 485 interface | integrated RS 485 interface |
| - Physical | RS 485 | RS 485 | RS 485 | RS 485 | RS 485 |
| - Isolated | No | No | No | Yes | Yes |
| - Power supply to interface (15 to 30 V DC), max. | 200 mA | 200 mA | 200 mA | 200 mA | 200 mA |
| Functionality | |||||
| - MPI | Yes | Yes | Yes | Yes | Yes |
| - DP master | No | No | No | Yes | Yes |
| - DP slave | No | No | No | Yes | Yes |
| - Point-to-point connection | No | No | No | No | No |
| MPI | |||||
| - Number of connections | 6 | 12 | 16 | 32 | 32 |
| - Services | |||||
| - PG/OP communication | Yes | Yes | Yes | Yes | Yes |
| - Routing | No | No | Yes | Yes | |
| - Global data communication | Yes | Yes | Yes | Yes | Yes |
| - S7 basic communication | Yes | Yes | Yes | Yes | Yes |
| - S7 communication | Yes | Yes | Yes | Yes | Yes |
| - S7 communication, as client | No | No; via CP and loadable FB | No; via CP and loadable FB | No; via CP and loadable FB | |
| - S7 communication, as server | Yes | Yes | Yes | Yes | Yes |
| - Number of stations, max. | 32 | ||||
| - Transmission rates, max. | 187,5 kBit/s | 187,5 kBit/s | 187,5 kBit/s | 12 Mbit/s | 12 Mbit/s |
| DP master | |||||
| - Services | |||||
| - PG/OP communication | Yes | Yes | |||
| - Routing | Yes | ||||
| - Global data communication | No | No | |||
| - S7 basic communication | No | No | |||
| - S7 communication | No | ||||
| - S7 communication, as server | Yes | ||||
| - Equidistance support | Yes | Yes | |||
| - SYNC/FREEZE | Yes | Yes | |||
| - Activate/deactivate DP slaves | Yes | ||||
| - Direct data exchange (lateral communication) | Yes; Sender and receiver | ||||
| - DPV1 | Yes | ||||
| - Transmission rates, max. | 12 kBit/s | 12 Mbit/s | |||
| - Number of DP slaves, max. | 124 | 125 | |||
| - Address area | |||||
| - Inputs, max. | 244 Byte | 2 KByte | |||
| - Outputs, max. | 244 Byte | 2 KByte | |||
| - User data per DP Slave | |||||
| - Inputs, max. | 244 Byte | ||||
| - Outputs, max. | 244 Byte | ||||
| DP slave | |||||
| - Services | |||||
| - Routing | Yes; only with active interface | Yes | |||
| - Global data communication | No | ||||
| - S7 Basic communication | No | ||||
| - S7 communication | No | ||||
| - Direct data exchange (lateral communication) | Yes | ||||
| - DPV1 | No | ||||
| - Programming | Yes | ||||
| - Transmission rates, max. | 12 kBit/s | 12 Mbit/s | |||
| - Intermediate memory | |||||
| - Inputs | 244 Byte | 244 Byte | |||
| - Outputs | 244 Byte | 244 Byte | |||
| - Address areas, max. | 32 | ||||
| - User data per address area, max. | 32 Byte | ||||
| 2nd interface | |||||
| - Type of interface | integrated RS 485 interface | integrated RS 485 interface | integrated RS 485 interface | ||
| - Physical | RS 485 | RS 485 | RS 485 | ||
| - Isolated | Yes | Yes | Yes | ||
| - Power supply to interface (15 to 30 V DC), max. | 200 mA | 200 mA | 200 mA | ||
| Functionality | |||||
| - MPI | No | No | No | ||
| - DP master | Yes | Yes | Yes | ||
| - DP slave | Yes | Yes | Yes | ||
| - Point-to-point connection | No | No | No | ||
| DP master | |||||
| - Number of connections, max. | 16 | 32 | 16 | ||
| - Services | |||||
| - PG/OP communication | Yes | Yes | Yes | ||
| - Routing | Yes | Yes | Yes | ||
| - Global data communication | No | No | No | ||
| - S7 basic communication | No | No | No | ||
| - S7 communication | No | No | Yes | ||
| - S7 communication, as client | No | No | No | ||
| - S7 communication, as server | No | No | Yes | ||
| - Equidistance support | Yes | Yes | Yes | ||
| - SYNC/FREEZE | Yes | Yes | Yes | ||
| - Activate/deactivate DP slaves | Yes | ||||
| - DPV1 | Yes | Yes | |||
| - Transmission rates, max. | 12 Mbit/s | 12 Mbit/s | 12 Mbit/s | ||
| - Number of DP slaves, max. | 124; per station | 124 | 125 | ||
| - Address area | |||||
| - Inputs, max. | 244 KByte | 244 KByte | 244 KByte | ||
| - Outputs, max. | 244 KByte | 244 KByte | 244 KByte | ||
| - User data per DP Slave | |||||
| - Inputs, max. | 244 Byte | ||||
| - Outputs, max. | 244 Byte | ||||
| DP slave | |||||
| - Number of connections | 16 | 32 | |||
| - Services | |||||
| - PG/OP communication | Yes | Yes | |||
| - Routing | Yes; with active interface | Yes; with active interface | Yes | ||
| - Global data communication | No | No | |||
| - S7 basic communication | No | No | |||
| - S7 communication, as client | No | No | |||
| - S7 communication, as server | No | No | |||
| - Direct data exchange (lateral communication) | Yes | Yes | |||
| - DPV1 | No | No | |||
| - GSD file | http://www.ad.siemens.de/csi_e/support under Product Support | http://www.ad.siemens.de/csi_e/support under Product Support | siem807f.gse | ||
| - Transmission rates, max. | 12 Mbit/s | 12 Mbit/s | 12 Mbit/s | ||
| - Automatic baud rates search | Yes; only when interface passive | Yes; only when interface passive | |||
| - Intermediate memory | |||||
| - Inputs | 244 Byte | 244 Byte | 244 Byte | ||
| - Outputs | 244 Byte | 244 Byte | 244 Byte | ||
| - Address areas, max. | 32 | 32 | |||
| - User data per address area, max. | 32 Byte | 32 Byte | |||
| CPU/ programming | |||||
| Programming language | |||||
| - STEP 7 | Yes; as of V 5.1 SP4 | Yes; as of V 5.1 SP 4 | Yes; as of V 5.1 SP4 | Yes; as of V 5.2 SP1 | Yes; V5.0 |
| - LAD | Yes | Yes | Yes | Yes | Yes |
| - FBD | Yes | Yes | Yes | Yes | Yes |
| - STL | Yes | Yes | Yes | Yes | Yes |
| - SCL | Yes | Yes | Yes | Yes | |
| - CFC | Yes | ||||
| - GRAPH | Yes | Yes | Yes | ||
| - HiGraph® | Yes | Yes | Yes | ||
| Software library | |||||
| - Process diagnostics | Yes | ||||
| - Software controller | Yes | ||||
| - Instruction set | See instruction list | See instruction list | See instruction list | See instruction list | See instruction list |
| - Bracket levels | 8 | 8 | 8 | 8 | 8 |
| - User program protection/password protection | Yes | Yes | Yes | Yes | Yes |
| - System functions (SFC) | See instruction list | See instruction list | See instruction list | See instruction list | See instruction list |
| - System function blocks (SFB) | see instruction list | See instruction list | see instruction list | See instruction list | see instruction list |
| Dimensions and weight | |||||
| - Weight, approx. | 270 g | 280 g | 290 g | 460 g | 930 g |
| - Width | 40 mm | 40 mm | 40 mm | 80 mm | 160 mm |
| - Height | 125 mm | 125 mm | 125 mm | 125 mm | 125 mm |
| - Depth | 130 mm | 130 mm | 130 mm | 130 mm | 130 mm |
| 6ES7 317-2EJ10-0AB0 | 6ES7 317-6TJ10-0AB0 | |
|---|---|---|
| Product version | ||
| - Associated programming package | STEP 7 as 5.3 | STEP 7 as of V 5.2 + SP1; S7 Distributed Safety as of V5.2 + SP1 |
| Supply voltages | ||
| Rated value | ||
| - 24 V DC | Yes | Yes |
| - permissible range, lower limit (DC) | 20.4 V | 20.4 V |
| - permissible range, upper limit (DC) | 28.8 V | 28.8 V |
| Voltages and currents | ||
| - External fusing for supply lines (recommendation) | Min. 2 A | Min. 2 A |
| Current consumption | ||
| - Inrush current, max. | 2.5 A | |
| - Inrush current, typ. | 2.5 A | |
| - I²t | 1 A²s | 1 A²s |
| - from load voltage L+ (no load), max. | 100 mA | |
| - Power dissipation, typical | 3.5 W | 6 W |
| Memory/backup | ||
| Memory | ||
| - Working memory | ||
| - integral | 512 KByte | 512 KByte |
| - expandable | No | No |
| - Load memory | ||
| - pluggable (MMC) | Yes | Yes |
| - pluggable (MMC), max. | 8 MByte | 8 MByte |
| Backup | ||
| - available | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) |
| CPU/blocks | ||
| DB | ||
| - Number, max. | 2,047; DB 0 reserved | 2,047; DB 0 reserved |
| - Size, max. | 64 KByte | 64 KByte |
| FB | ||
| - Number, max. | 2,048; see instruction list | 2,048; see instruction list |
| - Size, max. | 64 KByte | 64 KByte |
| FC | ||
| - Number, max. | 2,048; See instruction list | 2,048; See instruction list |
| - Size, max. | 64 KByte | 64 KByte |
| OB | ||
| - Number, max. | see instruction list | see instruction list |
| - Size, max. | 64 KByte | 64 KByte |
| Nesting depth | ||
| - per priority class | 16 | 16 |
| - additional levels within an error OB | 4 | 4 |
| CPU/processing times | ||
| - for bit instruction, min. | 0.05 µs | 0.05 µs |
| - for word instruction, min. | 0.2 µs | 0.2 µs |
| - for integer math, min. | 0.2 µs | 0.2 µs |
| - for floating-point math, min. | 1 µs | 1 µs |
| Timers/counters and their retentive characteristics | ||
| S7 counter | ||
| - Number | 512 | 512 |
| - of which retentive without battery | ||
| - adjustable | Yes | Yes |
| - Counting range | ||
| - adjustable | Yes | Yes |
| - lower limit | 0 | 0 |
| - upper limit | 999 | 999 |
| IEC counter | ||
| - available | Yes | Yes |
| - Type | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) |
| S7 times | ||
| - Number | 512 | 512 |
| - Retentivity | ||
| - adjustable | Yes | Yes |
| - preset | No retention | No retention |
| - Timing range | ||
| - lower limit | 10 ms | 10 ms |
| - upper limit | 9,990 s | 9,990 s |
| IEC timer | ||
| - available | Yes | Yes |
| - Type | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) |
| Data areas and their retentive characteristics | ||
| Flags | ||
| - Number | 4,096 Byte | 4,096 Byte |
| - adjustable retentivity | Yes; MB 0 to MB 4095 | Yes; MB 0 to MB 4095 |
| - Number of clock memories | 8; 1 memory byte | 8; 1 memory byte |
| Data blocks | ||
| - Number, max. | 2,047; DB 0 reserved | 2,047; DB 0 reserved |
| - Size, max. | 64 KByte | 64 KByte |
| - adjustable retentivity | Yes | Yes |
| Local data | ||
| - per priority class, max. | 1,024 Byte | 1,024 Byte |
| Address area | ||
| I/O address area | ||
| - Inputs | 8 KByte | 8 KByte |
| - Outputs | 8 KByte | 8 KByte |
| - of which distributed | ||
| - Inputs | 8 KByte | 8 KByte |
| - Outputs | 8 KByte | 8 KByte |
| Process image | ||
| - Inputs | 256 Byte | 256 Byte |
| - Outputs | 256 Byte | 256 Byte |
| Digital channels | ||
| - Inputs | 65,536 | 65,636 |
| - Outputs | 65,536 | 65,636 |
| - Inputs, of which central | 1,024 | 256 |
| - Outputs, of which central | 1,024 | 256 |
| Analog channels | ||
| - Inputs | 4,096 | 4,096 |
| - Outputs | 4,096 | 4,096 |
| - Inputs, of which central | 256 | 64 |
| - Outputs, of which central | 256 | 64 |
| Configuration | ||
| - Racks, max. | 4 | 1 |
| - Modules per rack, max. | 8 | 8 |
| Number of DP masters | ||
| - integral | 1 | 2 |
| - via CP | 2 | 2 |
| Number of FMs and CPs that can be operated (recommendation) | ||
| - FM | 8 | 8 |
| - CP, point-to-point | 8 | 8 |
| - CP, LAN | 10 | 10 |
| Time | ||
| Clock | ||
| - Hardware clock (realtime clock) | Yes | Yes |
| - buffered | Yes | Yes |
| - Deviation per day, max | 10 s | 10 s |
| Run-time meter | ||
| - Quantity | 4 | 4 |
| - Number | 0 to 3 | 0 to 3 |
| - Range of values | 0 to 2^31 hours (when using SFC 101) | 0 to 2^31 hours (when using SFC 101) |
| - Granularity | 1 hour | 1 hour |
| - retentive | Yes; must be restarted on each complete restart | Yes; must be restarted on each complete restart |
| Time synchronization | ||
| - supported | Yes | Yes |
| - on MPI, master | Yes | Yes |
| - on MPI, slave | Yes | Yes |
| - in AS, master | Yes | Yes |
| - in AS, slave | Yes | Yes |
| S7 message functions | ||
| - Number of stations that can log on for message functions, max. | 32; depending on the connections configured for PG/OP and S7 basic communication | 32; depending on the connections configured for PG/OP and S7 basic communication |
| - Process diagnostic messages | Yes | Yes |
| - simultaneously active Alarm-S blocks, max. | 60 | 60 |
| Test and startup functions | ||
| Status/modify | ||
| - Variable | Yes | Yes |
| - Variables | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters |
| - Number of variables, max. | 30 | 30 |
| - of which status variables, max. | 30 | 30 |
| - of which modify variables, max. | 14 | 14 |
| Forcing | ||
| - Forcing | Yes | Yes |
| - Forcing, variables | Inputs, outputs | Inputs, outputs |
| - Forcing, number of variables, max. | 10 | 10 |
| - Status block | Yes | Yes |
| - Single step | Yes | Yes |
| - Number of breakpoints | 2 | 2 |
| Diagnostic buffer | ||
| - available | Yes | Yes |
| - Number of inputs, max. | 100 | 100 |
| - adjustable | No | |
| Communication functions | ||
| - PG/OP communication | Yes | Yes |
| - Routing | Yes | Yes |
| Global data communication | ||
| - supported | Yes | Yes |
| - Size of GD packets, max. | 22 Byte | 22 Byte |
| S7 basic communication | ||
| - supported | Yes | Yes |
| S7 communication | ||
| - supported | Yes | Yes |
| S5 compatible communication | ||
| - supported | Yes; via CP and loadable FC | Yes; via CP and loadable FC |
| Number of connections | ||
| - overall | 32 | 32 |
| - usable for PG communication | 31 | 31 |
| - usable for OP communication | 31 | 31 |
| - usable for S7 basic communication | 30 | 31 |
| PROFINET CBA (at 50 % Communication Load) | ||
| - Number of remote interconnection nodes | 32 | |
| - Sum of all Master/Slave connectors | 1,000 | |
| - Data length of all input Master/Slave connectors | 4,000 Byte | |
| - Data length of all output Master/Slave connectors | 4,000 Byte | |
| - Data length for arrays and structures (acyclic interconnection), max. | 1,400 Byte | |
| - Data length for arrays and structures (cyclic interconnection), max. | 450 Byte | |
| - Data length for arrays and structures (local interconnection), max. | 128 Byte; Slave-dependent | |
| - Remote interconnections with acyclic transmission | ||
| - Sample frequency: sample interval, min. | 500 ms | |
| - Number of input interconnections | 100 | |
| - Number of output interconnections | 100 | |
| - Data length of all input interconnections | 2,000 Byte | |
| - Data length of all output interconnections | 2,000 Byte | |
| - Remote interconnections with cyclic transmission | ||
| - Transmission frequency: transmission interval, min. | 10 ms | |
| - Number of input interconnections | 200 | |
| - Number of output interconnections | 200 | |
| - Data length of all input interconnections | 2,000 Byte | |
| - Data length of all output interconnections | 2,000 Byte | |
| - HMI variables via PROFINET (acyclic) | ||
| - Update HMI variables | 500 ms | |
| - Number of HMI variables | 200 | |
| - Data length of all HMI variables | 2,000 Byte | |
| - PROFIBUS Proxy Functionality | ||
| - supports | Yes | |
| - Number of coupled PROFIBUS devices | 16 | |
| - Number of device internals and PROFIBUS interconnections | 500 | |
| - Data length of all device internals and PROFIBUS interconnections | 4,000 Byte | |
| 1st interface | ||
| - Type of interface | integrated RS 485 interface | integrated RS 485 interface |
| - Physical | RS 485 | RS 485 |
| - Isolated | Yes | Yes |
| - Power supply to interface (15 to 30 V DC), max. | 200 mA | 200 mA |
| Functionality | ||
| - MPI | Yes | Yes |
| - DP master | Yes | Yes |
| - DP slave | Yes | Yes |
| - Point-to-point connection | No | No |
| MPI | ||
| - Number of connections | 16 | |
| - Services | ||
| - PG/OP communication | Yes | Yes |
| - Routing | Yes | Yes |
| - Global data communication | Yes | Yes |
| - S7 basic communication | Yes | Yes |
| - S7 communication | Yes | Yes |
| - S7 communication, as client | No; via CP and loadable FB | Yes; via CP and loadable FB |
| - S7 communication, as server | Yes | Yes |
| - Transmission rates, max. | 12 Mbit/s | 12 Mbit/s |
| DP master | ||
| - Services | ||
| - PG/OP communication | Yes | Yes |
| - Routing | Yes | Yes |
| - Global data communication | No | No |
| - S7 basic communication | No | No |
| - S7 communication | No | No |
| - Equidistance support | Yes | Yes |
| - SYNC/FREEZE | Yes | Yes |
| - DPV1 | Yes | Yes |
| - Transmission rates, max. | 12 Mbit/s | 12 Mbit/s |
| - Number of DP slaves, max. | 124 | 124 |
| - Address area | ||
| - Inputs, max. | 244 KByte | 244 KByte |
| - Outputs, max. | 244 KByte | 244 KByte |
| DP slave | ||
| - Services | ||
| - Routing | Yes; with active interface | Yes |
| - Global data communication | No | No |
| - S7 Basic communication | No | No |
| - S7 communication | No | No |
| - Direct data exchange (lateral communication) | Yes | Yes |
| - DPV1 | No | No |
| - Transmission rates, max. | 12 Mbit/s | 12 kBit/s |
| - Intermediate memory | ||
| - Inputs | 244 Byte | 244 Byte |
| - Outputs | 244 Byte | 244 Byte |
| - Address areas, max. | 32 | 32 |
| - User data per address area, max. | 32 Byte | 32 Byte |
| 2nd interface | ||
| - Type of interface | Integrated Ethernet interface | integrated RS 485 interface |
| - Physical | Ethernet | RS 485 |
| - Isolated | Yes | Yes |
| - Power supply to interface (15 to 30 V DC), max. | 0 mA | 200 mA |
| Functionality | ||
| - MPI | No | No |
| - DP master | No | Yes; DP(DRIVE)-Master |
| - DP slave | No | No |
| - Point-to-point connection | No | No |
| - PROFINET CBA | Yes | |
| - PROFINET IO-Controller | Yes; as of firmware version V2.3 | |
| DP master | ||
| - Services | ||
| - PG/OP communication | No | |
| - Routing | No | |
| - Global data communication | No | |
| - S7 basic communication | No | |
| - S7 communication | No | |
| - Equidistance support | Yes | |
| - SYNC/FREEZE | No | |
| - Activate/deactivate DP slaves | No | |
| - DPV1 | No | |
| - Transmission rates, max. | 12 Mbit/s | |
| - Number of DP slaves, max. | 32 | |
| - Address area | ||
| - Inputs, max. | 244 KByte | |
| - Outputs, max. | 244 KByte | |
| PROFINET CBA | ||
| - acyclic transmission | Yes | |
| - cyclic transmission | Yes | |
| CPU/ programming | ||
| Programming language | ||
| - STEP 7 | Yes; as of V 5.3 | Yes; as of V 5.2 SP 1 and the S7-Technology option pack |
| - LAD | Yes | Yes |
| - FBD | Yes | Yes |
| - STL | Yes | Yes |
| - SCL | Yes | |
| - GRAPH | Yes | |
| - HiGraph® | Yes | |
| Software library | ||
| - Instruction set | See instruction list | See instruction list |
| - Bracket levels | 8 | 8 |
| - User program protection/password protection | Yes | Yes |
| - System functions (SFC) | See instruction list | See instruction list |
| - System function blocks (SFB) | see instruction list | see instruction list |
| Digital inputs | ||
| - Number of digital inputs | 4 | |
| - Functions | technological functions, e.g. reference point detection (BERO); Digital inputs also have (restricted) use in the STEP 7 user program. | |
| Number of inputs that can be driven in parallel | ||
| - Number of inputs that can be driven in parallel, up to 40 °C | 4 | |
| - Number of inputs that can be driven in parallel, up to 60 °C | 4 | |
| Length of cable | ||
| - Length of cable shielded, max | 1,000 m | |
| - Length of cable unshielded, max | 600 m | |
| - Standard DI | ||
| - Input characteristic to comply with IEC 1131, Type 1 | Yes | |
| Input voltage | ||
| - Rated value, DC | 24 V | |
| - for signal "0" | -3 to 5 V | |
| - for signal "1" | 15 to 30 V | |
| Input current | ||
| - for 1 signal, typical | 7 mA | |
| Input delay (at rated value of the input voltage) | ||
| - for counters/technological functions | ||
| - at 0 after 1, max. | 10 µs; typ. | |
| - at 1 after 0, max. | 10 µs; typ. | |
| Digital outputs | ||
| - Number of digital outputs | 8 | |
| - Functions | for technological functions, e.g. rapid cam switching signals | |
| - Length of cable shielded, max. | 1,000 m | |
| - Length of cable unshielded, max. | 600 m | |
| - Short-circuit protection of the output | Yes | |
| - Short-circuit protection of the output, response threshold, typical | 1.0 A | |
| - Limitation of voltage induced on circuit interruption to | 2L+ (-48 V) | |
| - Lamp load, max. | 5 W | |
| - Driving a digital input | No | |
| Output voltage | ||
| - for 0 signal (DC), max. | 3 V | |
| - for 1 signal | 2L+ (-2.5 V) | |
| Output current | ||
| - for 1 signal rated value | 0.5 A | |
| - for 1 signal permissible range for 0 to 60 °C, min. | 5 mA | |
| - for 1 signal permissible range for 0 to 60 °C, max. | 0.6 A | |
| - for 0 signal residual current, max. | 0.3 mA | |
| Parallel switching of 2 outputs | ||
| - to increase power | No | |
| - to redundantly drive a load | No | |
| Switching frequency | ||
| - at resistive load, max. | 100 Hz | |
| - at inductive load, max. | 0.2 Hz; to IEC 947-5-1, DC13 | |
| - at lamp load, max. | 100 Hz | |
| Summation current of the outputs (per group) | ||
| - horizontal mounting positions | ||
| - vertical installation, up to 40 °C, max. | 3 mA | |
| - horizontal installation, up to 40 °C, max. | 4 A | |
| - horizontal installation, up to 60 °C, max. | 3 mA | |
| Load impedance range | ||
| - lower limit | 48 Ω | |
| - upper limit | 4 kΩ | |
| Sensor | ||
| Connectable encoders | ||
| - 2-wire BEROS | No | |
| Potentials/ electrical isolation | ||
| Digital output functions | ||
| - between the channels and the backplane bus | Yes | |
| Digital input functions | ||
| - between the channels and the backplane bus | Yes | |
| Dimensions and weight | ||
| - Weight, approx. | 460 g | 750 g |
| - Width | 80 mm | 160 mm |
| - Height | 125 mm | 125 mm |
| - Depth | 130 mm | 130 mm |
| 6ES7 315-6FF01-0AB0 | 6ES7 317-6FF00-0AB0 | |
|---|---|---|
| Product version | ||
| - Associated programming package | STEP 7 as of V 5.1 + SP 6 | STEP 7 as of V 5.2 + SP1; S7 Distributed Safety as of V5.2 + SP1 |
| Supply voltages | ||
| Rated value | ||
| - 24 V DC | Yes | Yes |
| - permissible range, lower limit (DC) | 20.4 V | 20.4 V |
| - permissible range, upper limit (DC) | 28.8 V | 28.8 V |
| Current consumption | ||
| - Inrush current, typ. | 2.5 A | 2.5 A |
| - I²t | 0.5 A²s | 0.5 A²s |
| - Power dissipation, typical | 2.5 W | 2.5 W |
| Memory/backup | ||
| Memory | ||
| - Working memory | ||
| - integral | 192 KByte; Compared with a standard program the number of F statements is limited because of the F-specific overheads; depending on the method of programming, about 36 K F statements are possible. | 512 KByte; of which max. 256kB for retentive DB |
| - expandable | No | No |
| - Load memory | ||
| - pluggable (MMC) | Yes | Yes |
| - pluggable (MMC), max. | 8 MByte | 8 MByte |
| Backup | ||
| - available | Yes; guaranteed by MMC (maintenance-free) | Yes; guaranteed by MMC (maintenance-free) |
| CPU/blocks | ||
| DB | ||
| - Number, max. | 1,023; DB 0 reserved | 2,047; DB 0 reserved |
| - Size, max. | 16 KByte | 64 KByte |
| FB | ||
| - Number, max. | 2,048; see instruction list | 2,048; see instruction list |
| - Size, max. | 16 KByte | 64 KByte |
| FC | ||
| - Number, max. | 2,048; See instruction list | 2,048; see instruction list |
| - Size, max. | 16 KByte | 64 KByte |
| OB | ||
| - Number, max. | see instruction list | see instruction list |
| - Size, max. | 16 KByte | 64 KByte |
| Nesting depth | ||
| - per priority class | 8 | 8 |
| - additional levels within an error OB | 4 | 4 |
| CPU/processing times | ||
| - for bit instruction, min. | 0.1 µs | 0.1 µs |
| - for word instruction, min. | 0.2 µs | 0.1 µs |
| - for integer math, min. | 2 µs | 0.2 µs |
| - for floating-point math, min. | 6 µs | 2 µs |
| Timers/counters and their retentive characteristics | ||
| S7 counter | ||
| - Number | 256 | 512 |
| - of which retentive without battery | ||
| - adjustable | Yes | Yes |
| - Counting range | ||
| - lower limit | 0 | 0 |
| - upper limit | 999 | 999 |
| IEC counter | ||
| - available | Yes | Yes |
| - Type | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) |
| S7 times | ||
| - Number | 256 | 512 |
| - Retentivity | ||
| - adjustable | Yes | Yes |
| - preset | No retention | No retention |
| - Timing range | ||
| - lower limit | 10 ms | 10 ms |
| - upper limit | 9,990 s | 9,990 s |
| IEC timer | ||
| - available | Yes | Yes |
| - Type | SFB, unlimited quantity (only limited by working memory) | SFB, unlimited quantity (only limited by working memory) |
| Data areas and their retentive characteristics | ||
| Flags | ||
| - Number | 2,048 Byte | 4,096 Byte |
| - adjustable retentivity | Yes; MB 0 to MB 2047 | Yes; MB 0 to MB 4095 |
| - Number of clock memories | 8; 1 memory byte | 8; 1 memory byte |
| Data blocks | ||
| - Number, max. | 1,023; DB 0 reserved | 2,047; DB 0 reserved |
| - Size, max. | 16 KByte | 64 KByte |
| Local data | ||
| - per priority class, max. | 1,024 Byte | 1,024 Byte |
| Address area | ||
| I/O address area | ||
| - Inputs | 2 KByte | 8 KByte |
| - Outputs | 2 KByte | 8 KByte |
| - of which distributed | ||
| - Inputs | 2 KByte | 8 KByte |
| - Outputs | 2 KByte | 8 KByte |
| Process image | ||
| - Inputs | 384 Byte | 1,024 Byte |
| - Outputs | 384 Byte | 1,024 Byte |
| Digital channels | ||
| - Inputs | 16,384 | 65,536 |
| - Outputs | 16,384 | 65,536 |
| - Inputs, of which central | 1,024 | 1,024 |
| - Outputs, of which central | 1,024 | 1,024 |
| Analog channels | ||
| - Inputs | 1,024 | 1,024 |
| - Outputs | 1,024 | 1,024 |
| - Inputs, of which central | 256 | 256 |
| - Outputs, of which central | 256 | 256 |
| Configuration | ||
| - Racks, max. | 4 | 4 |
| - Modules per rack, max. | 8 | 8 |
| Number of DP masters | ||
| - integral | 1 | 2 |
| - via CP | 1 | 2 |
| Number of FMs and CPs that can be operated (recommendation) | ||
| - FM | 8 | 8 |
| - CP, point-to-point | 8 | 8 |
| - CP, LAN | 10 | 10 |
| Time | ||
| Clock | ||
| - Hardware clock (realtime clock) | Yes | Yes |
| - buffered | Yes | Yes |
| - Deviation per day, max | 10 s | 10 s |
| Run-time meter | ||
| - Quantity | 1 | 4 |
| - Number | 0 | 0 to 3 |
| - Range of values | 0 to 2^31 hours (when using SFC 101) | 0 to 2^31 hours (when using SFC 101) |
| - Granularity | 1 hour | 1 hour |
| - retentive | Yes; must be restarted on each complete restart | Yes; must be restarted on each complete restart |
| Time synchronization | ||
| - supported | Yes | Yes |
| - on MPI, master | Yes | Yes |
| - on MPI, slave | Yes | Yes |
| - in AS, master | Yes | Yes |
| S7 message functions | ||
| - Number of stations that can log on for message functions, max. | 16; depending on the connections configured for PG/OP and S7 basic communication | 32; depending on the connections configured for PG/OP and S7 basic communication |
| - Process diagnostic messages | Yes | Yes |
| - simultaneously active Alarm-S blocks, max. | 40 | 60 |
| Test and startup functions | ||
| Status/modify | ||
| - Variable | Yes | Yes |
| - Variables | Inputs, outputs, flags, DB, timers, counters | Inputs, outputs, flags, DB, timers, counters |
| - Number of variables, max. | 30 | 30 |
| - of which status variables, max. | 30 | 30 |
| - of which modify variables, max. | 14 | 14 |
| Forcing | ||
| - Forcing | Yes | Yes |
| - Forcing, variables | Inputs, outputs | Inputs, outputs |
| - Forcing, number of variables, max. | 10 | 10 |
| - Status block | Yes | Yes |
| - Single step | Yes | Yes |
| - Number of breakpoints | 2 | 2 |
| Diagnostic buffer | ||
| - available | Yes | Yes |
| - Number of inputs, max. | 100 | 100 |
| - adjustable | No | No |
| Communication functions | ||
| - PG/OP communication | Yes | Yes |
| - Routing | Yes | Yes |
| Global data communication | ||
| - supported | Yes | Yes |
| - Size of GD packets, max. | 22 Byte | 22 Byte |
| S7 basic communication | ||
| - supported | Yes | Yes |
| S7 communication | ||
| - supported | Yes | Yes |
| S5 compatible communication | ||
| - supported | Yes; via CP and loadable FC | Yes; via CP and loadable FC |
| Number of connections | ||
| - overall | 16 | 32 |
| - usable for PG communication | 15 | 31 |
| - usable for OP communication | 15 | 31 |
| - usable for S7 basic communication | 13 | 31 |
| 1st interface | ||
| - Type of interface | integrated RS 485 interface | integrated RS 485 interface |
| - Physical | RS 485 | RS 485 |
| - Isolated | No | No |
| - Power supply to interface (15 to 30 V DC), max. | 200 mA | 200 mA |
| Functionality | ||
| - MPI | Yes | Yes |
| - DP master | No | Yes |
| - DP slave | No | No |
| - Point-to-point connection | No | No |
| MPI | ||
| - Number of connections | 16 | 32 |
| - Services | ||
| - PG/OP communication | Yes | Yes |
| - Routing | Yes | Yes |
| - Global data communication | Yes | Yes |
| - S7 basic communication | Yes | Yes |
| - S7 communication | Yes | Yes |
| - S7 communication, as client | Yes; via CP and loadable FB | Yes; via CP and loadable FB |
| - S7 communication, as server | Yes | Yes |
| - Transmission rates, max. | 187.5 kBit/s | 12 Mbit/s |
| DP master | ||
| - Number of connections, max. | 32 | |
| - Services | ||
| - PG/OP communication | Yes | |
| - Routing | Yes | |
| - Global data communication | No | |
| - S7 basic communication | No | |
| - S7 communication | No | |
| - Equidistance support | Yes | |
| - SYNC/FREEZE | Yes | |
| - DPV1 | Yes | |
| - Transmission rates, max. | 12 Mbit/s | |
| - Number of DP slaves, max. | 125 | |
| - Address area | ||
| - Inputs, max. | 244 KByte | |
| - Outputs, max. | 244 KByte | |
| 2nd interface | ||
| - Type of interface | integrated RS 485 interface | integrated RS 485 interface |
| - Physical | RS 485 | RS 485 |
| - Isolated | Yes | Yes |
| - Power supply to interface (15 to 30 V DC), max. | 200 mA | 200 mA |
| Functionality | ||
| - MPI | No | No |
| - DP master | Yes | Yes |
| - DP slave | Yes | Yes |
| - Point-to-point connection | No | No |
| DP master | ||
| - Number of connections, max. | 16 | 32 |
| - Services | ||
| - PG/OP communication | Yes | Yes |
| - Routing | Yes | Yes |
| - Global data communication | No | No |
| - S7 basic communication | No | No |
| - S7 communication | No | No |
| - Equidistance support | Yes | Yes |
| - SYNC/FREEZE | Yes | Yes |
| - DPV1 | Yes | Yes |
| - Transmission rates, max. | 12 Mbit/s | 12 Mbit/s |
| - Number of DP slaves, max. | 125 | 125 |
| - Address area | ||
| - Inputs, max. | 244 KByte | 244 KByte |
| - Outputs, max. | 244 KByte | 244 KByte |
| DP slave | ||
| - Number of connections | 16 | 32 |
| - Services | ||
| - PG/OP communication | Yes | Yes |
| - Routing | Yes; with active interface | Yes; with active interface |
| - Global data communication | No | No |
| - S7 basic communication | No | No |
| - S7 communication, as client | No | No |
| - S7 communication, as server | No | No |
| - Direct data exchange (lateral communication) | Yes | Yes |
| - DPV1 | No | No |
| - GSD file | http://www.ad.siemens.de/csi_e/gsd | http://www.ad.siemens.de/csi_e/gsd |
| - Transmission rates, max. | 12 Mbit/s | 12 Mbit/s |
| - Intermediate memory | ||
| - Inputs | 244 Byte | 244 Byte |
| - Outputs | 244 Byte | 244 Byte |
| - Address areas, max. | 32 | 32 |
| - User data per address area, max. | 32 Byte | 32 Byte |
| CPU/ programming | ||
| Programming language | ||
| - STEP 7 | Yes; as of V5.1 SP6 | Yes; STEP 7 as of V 5.2 + SP1 S7 Distributed Safety as of V5.2 SP1 |
| - LAD | Yes | Yes |
| - FBD | Yes | Yes |
| - STL | Yes | Yes |
| - SCL | Yes | Yes |
| Software library | ||
| - Instruction set | See instruction list | See instruction list |
| - Bracket levels | 8 | 8 |
| - User program protection/password protection | Yes | Yes |
| - System functions (SFC) | See instruction list | See instruction list |
| - System function blocks (SFB) | see instruction list | See instruction list |
| Dimensions and weight | ||
| - Weight, approx. | 290 g | 560 g |
| - Width | 40 mm | 80 mm |
| - Height | 125 mm | 125 mm |
| - Depth | 130 mm | 130 mm |