# Запобіжна електроніка — ELMS1

> Запобіжна електроніка для захисту від перевантаження та виявлення провисання каната на кранах і талях, сертифікована за PLe та SIL 3.

- Код каталогу: elms1
- Модель: ELMS1
- Категорія: Вимірювання сили › Accessories - Force
- Сторінка товару: https://avigan.com.ua/wika/uk/products/elms1
- Ціна: за запитом
- Постачальник: AVIGAN (ТОВ «ВІКА Прилад»), офіційний партнер WIKA в Україні

## Опис

Модель ELMS1 — це багатофункціональний і конфігурований пристрій безпечного комутування. Електроніка складається з модуля керування та окремих ...

## Застосування

- Harbour cranes (RTG, STS, RMG)
- Ship and offshore cranes
- Overhead traveling cranes, bridge cranes, gantry cranes and hoists
- Conveyor systems
- Machine building and plant construction, manufacturing

## Особливості

- Certified safety electronics, certified in accordance with DIN EN ISO 13849-1, PLe
- Certified system solution incl. force measurement, certified in accordance with DIN EN 13849-1 Cat. 3, PLd
- 16 x safe inputs (8 x 4 ... 20 mA analogue inputs, 8 x digital inputs), 2 x safe relay outputs and 6 x safe solid-state outputs (positive switching)
- Additional module with ProfiBus ® , ProfiNet ® , EtherCat ® and CANopen ®
- Complex functionality, easy to configure via PC

## Технічні характеристики

| Параметр | Значення |
|---|---|
| model | ELMS1 |
| product family | ELMS |
| short description | Safety electronics for overload protection and slack rope detection in cranes and hoists, certified to PLe and SIL 3. |
| subcategory | Safety electronics |
| certifications | RoHS |
| safety integrity level | SIL 3 |
| ambient temp | -10 … 55 °C |
| ip rating | IP20 |
| weight kg | 0.45 |
| languages in datasheet | en |
| force ranges | 0 … 3 kN; 0 … 100 kN; 0 … 2 kN; 0 … 10 kN; 0 … 10000 kN |
| accuracy class | ±3 % of full scale |
| output signal | 4 ... 20 mA / DC 0 … 10 V |
| mounting type | DIN rail |
| cell material | Polyamide (PA), non-reinforced; stainless steel |

## Таблиці з даташита

| Model ELMS1 | 2 |
|---|---|
| Analog input |  |
| Input signal | 4 ...20mA/DC0…10V |
| Current inputs | 4…20mA |
| Input resistance | 4 …20mA:approx.500 Ω, DC 0 …10V:> 5 kΩ |
| Accuracy | ±3 %of full scale |
| Digital input |  |
| Voltage at the inputs | DC 24V -15 %, +10 %, ≤ 10 %residual ripple |
| Current supply | max.4mA |
| Input frequency | at I9 to I12 ≤ 500 Hz via 2 sensors e.g. proximity sensors at I9 to I16 ≤ 50 kHz with HTL signals via incremental measuring system |
| Rated temperature range | -10 …+55 °C |
| Storage temperature range | -40 …+85 °C |
| Relay output |  |
| Minimum switching current | 10mA |
| Switching capacity per DIN EN 60947-4-1/ EN 60947-5-1 | DC1:24V / 6 A DC13:24V / 5 A |
| Total of switching and continuous currents | K3, K4: ≤ 6 A K5, K6: ≤ 6 A |
| Service life at switching capacity:DC13 | DC 24 V/ 1 A: 1 x 10 5 DC 24 V/ 4 A: 4 x 10 4 |
| Maximum number of cycles | DC13 4 A: 360 cycles/h |
| Mechanical lifetime | > 10 7 h |
| Solid-state output |  |
| Minimum switching current | 1mA |
| Switching current and continuous current | IO1-IO4: 0.25 A O1-O6: 1 A |
| Total of switching and continuous current | IO1-IO4: 0.8 A O1-O6: 3 A |
| Other outputs | Profibus  DP, ProfiNet  , EtherCat, CANopen ® etc. |
| Supply voltage | DC 24V -15 %, + 10 %/ max. residual ripple10% |
| Power consumption | 3.0W |
| Response time |  |
| Operate and disengaging time | 100 ms |
| Total response time of the safety function | typically (relay): 10 ms / 3 ms |
| Terminals | Spring-loaded terminals, plug-in |
| Connection cross-section | 0.2 ..1.5mm 2 (AWG24-16) with end splices |
| Lead | only 60/75 °C copper |
| Connection diagram | a wiring diagram will be created and delivered with every project |
| Case material | Polyamide (PA), non-reinforced |
| Ingress protection | Cases and terminals: IP20 / minimum requirement for the installation location IP54 |
| Electromagnetic compatibility | DIN EN 61326-1: 2013-07 DIN EN 61326-3-1: 2015-06 EN 55011: 2009+A1: 2010 (class A) |
| RoHS | EN 50581:2012 |
| Safety | Category 4, PLe based on Table 3 of DIN EN 13849-1: 2016-06, this corresponds |
| Mounting | to SIL 3 on DIN rail, 35 mm, per EN 60715:2001 |
| Weight | approx. 450 g |

| Model ELMS1 | With display | In the control cabinet |
|---|---|---|
| Version | Only in combination with a CANopen ® module, 4.3'TFT touchscreen with LED backlighting Dimensions (W x H x D) 140 x 100x5mm | installed |
| Rated temperature range | 0…50°C | -10 …+50 °C |
| Storage temperature range | -25 …+75 °C | -40 …+85 °C |
| Supply voltage | AC 230V |  |
| Ingress protection | IP65 |  |

| 1 | 2 | 3 | 4 |
|---|---|---|---|
| Module ELMS1 | Dimensions inmm |  |  |
| Height (H) | Width (W) | Depth (D) |  |
| Control module | 114 | 67.5 | 99 |
| Extensions | 114 | 22.5 | 99 |

| 1 | Model | Description |
|---|---|---|
| F23S1 |  | Tension/compression force transducers ■ Measuring ranges 0 ... 3 to 0 ... 100 kN ■ Material: stainless steel (corrosion-resistant) ■ Integrated amplifier ■ For further technical information, see data sheet FO 51.17 |
| F33S1 |  | Shear beam ■ Measuring ranges 0 ... 2 kN to 0 ... 100 kN ■ Material: stainless steel (corrosion-resistant) ■ Integrated amplifier ■ For further technical information, see data sheet FO 51.42 |
| F53S8 |  | Heavy-duty load pin ■ Measuring ranges as of 0 ... 10 kN ■ Material: stainless steel (corrosion-resistant) ■ Integrated amplifier ■ For further technical information, see data sheet FO 51.43 |
| F73S1 |  | Tension link ■ 0 ... 5 to 0 ... 10,000 kN ■ Material: stainless steel (corrosion-resistant) ■ Integrated amplifier ■ For further technical information, see data sheet FO 51.19 |
| EZE53 |  | Cable ■ Resistant to seawater ■ UV-resistant |

## Документація

- [ds_ac5006_en_co_8091cb](https://avigan.com.ua/wika/docs/wika/ds_ac5006_en_co.pdf) — PDF, 1907 KB, en