# שסתום מחט ושסתום מחט רב-יציאות — IV1X

> שסתום מחט ושסתום מחט רב-יציאות להפרדת התהליך ממכשירי מדידת לחץ, עם אפשרויות לאוורור וחיבור למכשיר.

- קוד קטלוגי: iv10_iv11_iv19_iv1a_iv1b_iv1n
- דגם: IV1X
- קטגוריה: מדידת לחץ › Valves and protective devices
- עמוד המוצר: https://avigan.com.ua/wika/he/products/iv10_iv11_iv19_iv1a_iv1b_iv1n
- מחיר: 93.03 EUR
- ספק: AVIGAN (TOV VIKA Prylad), שותף רשמי של WIKA באוקראינה

## תיאור

שסתומי מחט ושסתומי רב-פורט מפרידים בין התהליך לבין מכשירי המדידה כגון מדי לחץ, מתגים או משדרים. למידע נוסף.

## יישומים

- Shut off and vent pressure measuring instruments
- For gaseous and liquid aggressive media that are not highly viscous or crystallising, also in aggressive environments
- Process industry: Oil & gas, petrochemical, chemical industries, power generation, water and wastewater

## תכונות מיוחדות

- Low-wear design due to non-rotating spindle tip in the bonnet
- Low torque and smooth operation of valve handle even at high pressure
- Enhanced safety due to blow-out proof bonnet design
- Valve seat tested for leak tightness per BS 6755 / ISO 5208 leak rate A
- Customer-specific combination of valves and instruments (instrument hook-up) on request

## מפרט טכני

| פרמטר | ערך |
|---|---|
| model | IV1 |
| product family | IV1 |
| short description | Needle valve and multiport needle valve for separating process from pressure measuring instruments, with options for venting and instrument hook-up. |
| subcategory | Needle valve |
| certifications | EAC; CE; CRN; DNV; Bureau Veritas; NACE MR0175/ISO 15156; API 607; ISO 10497; TA-Luft (VDI 2440); ISO 15848-1; ASME B31.1; MSS SP-99; MSS SP-105; ASME B16.34; ASME B1.20.1; ASME B31.3; ASME BPVC Section VIII Division 1; MSS SP-61; API 598; ISO 5208 |
| languages in datasheet | en |
| pressure ranges | 0 … 206 bar; 0 … 420 bar; 0 … 690 bar; 0 … 3000 psi; 0 … 6000 psi; 0 … 10000 psi |
| process connections | Swivel connection; Weld-in connection; Compression fitting; Flange connection per IEC 61518, Form A or Form B; ¼ NPT; ⅜ NPT; ½ NPT; ¾ NPT; G ¼; G ⅜; G ½; G ¾; Connection for EMICOgauge; ¼NPT; ⅜NPT; ½NPT; ¾NPT; G¼; G⅜; G½; G¾ |
| case material | Stainless steel 316/316L (1.4401/1.4404); Stainless steel 321 (1.4541); Monel 400 (2.4360); Hastelloy C276 (2.4819); Stainless steel 6Mo (1.4547); Duplex F51 (1.4462); Super Duplex F55 (1.4501); Inconel 625 (2.4856); Incoloy 825 (2.4858) |
| wetted parts material | Stainless steel 316/316L (1.4401/1.4404); Stainless steel 321 (1.4541); Monel 400 (2.4360); Hastelloy C276 (2.4819); Stainless steel 6Mo (1.4547); Duplex F51 (1.4462); Super Duplex F55 (1.4501); Inconel 625 (2.4856); Incoloy 825 (2.4858) |
| sealing material | PTFE; Polar PTFE; Graphite; FKM; FKM AED; RTFE; SIGRAFLEX ZX graphite; SIGRAFLEX ® ZX graphite; SIGRAFLEX®ZX graphite |
| process temp | -70 … 538 °C |

## טבלאות מגיליון הנתונים

| Model | 2 | Description | Functional diagram |
|---|---|---|---|
|  | IV10 | Needle valve | Vent Shut off |
|  | IV11 | Multiport needle valve | off |
|  | IV19 | Needle valve, angled connections 90° | Vent |
|  | IV1A | Needle valve, extended valve body, 75 mm[2.95 in] | Vent |
|  | IV1B | Needle valve, extended valve body, 100 mm[3.94 in] | Vent Shut off |
|  | IV1N | Needle valve, natural gas design | Shut off |

| Basic information | 2 |
|---|---|
| Basic features | ■ Blow-out proof valve spindle ■ Non-rotating, low-wear spindle tip ■ Metal-to-metal back seat design |
| Special design features | ■ Without ■ For oxygen, oil- and grease-free ■ ASME B31.1, power piping (only available with graphite sealing packing) ■ Dielectric design (only available for model IV1N) |
| Standards used |  |
| Basic design | ■ MSS SP-99, valves for measuring instruments ■ MSS SP-105, instrument valves for code applications ■ ASME B16.34, valves - flanged, threaded and welding end ■ ASME B1.20.1, pipe threads, general purpose (inch) ■ ASME B31.3, process piping ■ ASME BPVC, section VIII, division 1 |
| Special design | ■ Without ■ ISO 10497, API 6FA and API 607, type test for fire safety ■ TA-Luft (VDI 2440) and ISO 15848-1, type test for fugitive emissions |
| Tests | MSS SP-61, pressure testing of valves |
| Special tests | ■ Without ■ API 598, valve inspection and testing ■ ISO 5208, pressure testing of metallic valves with leakage rate A |
| Material requirements | NACE MR0175 / ISO 15156, use in H₂S-containing environments in oil and gas production |
| Special material requirements | ■ Without ■ NORSOK M-630, specification for use in pipelines (Norway) |
| Marking | MSS SP-25, standard marking system for valves |

| Bonnet | 2 |
|---|---|
| Bonnet design | ■ Screwed bonnet, 4 mm[0.16 in] bore size ■ Bonnet with extended handle, 4 mm[0.16 in] bore size ■ Miniature bonnet, 4 mm[0.16 in] bore size ■ Cryogenic bonnet for medium temperatures to -196 °C [-320 °F],4mm [0.16 in] bore size ■ OS&Y bonnet, bolted, 6 mm[0.24 in] bore size 1) ■ Bolted bonnet, 8 mm[0.31 in] bore size ■ Bolted bonnet, 10 mm[0.39 in] bore size ■ Bonnet for panel mounting, 4 mm[0.16 in] bore size ■ Metering bonnet for natural gas, 9.5 mm[0.375 in] bore size |
| Bonnet variant | ■ Without ■ Anti-tamper for shut-off valve, padlock not included ■ Anti-tamper for shut-off valve, padlock included ■ Small T-handle ■ T-handle from stainless steel 316L (1.4404) |

### Process connection / Instrument connection

| 1 | 2 | 3 |
|---|---|---|
| Standard | ■ Threaded connection per ANSI B1.20.1, code NPT ■ Threaded connection per ISO 228-1, codeG ■ Swivel connection ■ Weld-in connection ■ Compression fitting ■ Flange connection per IEC 61518, Form A or Form B (only available for model IV1N) |  |
| Size | ■ ¼NPT ■ ⅜NPT ■ ½NPT ■ ¾NPT | ■ G¼ ■ G⅜ ■ G½ ■ G¾ |
| Vent connection | ■ Without ■ Lateral bleeder screw, plug screw included ■ ¼NPTfemale, plug screw included ■ ½NPTfemale, plug screw included ■ ¼NPTfemale with installed bleeder screw ■ G¼female, plug screw included |  |
| Test connection | ■ Without |  |

### Operating conditions

| Permissible operating pressure | ■ ≤ 3,000 psi or ≤ 206 bar ■ ≤ 6,000 psi or ≤ 420 bar ■ ≤ 10,000 psi or ≤ 690 bar 1) |
|---|---|
| Pressure and temperature limits | The limits for operating pressure and temperature depend on the version and the sealing material. →For diagram, see page 7 |

### Material

| Wetted parts | 2 | 3 |
|---|---|---|
| Valve body, bonnet body | ■ Stainless steel 316/316L (1.4401/1.4404) ■ Stainless steel 321 (1.4541) ■ Monel 400 (2.4360) ■ Hastelloy C276 (2.4819) | ■ Stainless steel 6Mo (1.4547) ■ Duplex F51 (1.4462) ■ Super Duplex F55 (1.4501) ■ Inconel 625 (2.4856) ■ Incoloy 825 (2.4858) |
| Spindle tip | ■ Stainless steel 316/316L (1.4401/1.4404) ■ Monel 400 (2.4360) ■ Hastelloy C276 (2.4819) | ■ Duplex F51 (1.4462) ■ Inconel 625 (2.4856) ■ Hardfaced with Stellite 6 |
| Sealing packing | ■ PTFE, temperature range: -55 ...+210 °C [-67 ...+410 °F] ■ Polar PTFE, temperature range: -70 ...+210 °C [-94 ...+410 °F] ■ Graphite, temperature range: -55 ...+538 °C [-67 ... +1,000 °F] ■ SIGRAFLEX ® ZX graphite, nuclear quality, temperature range: -55 ...+538 °C [-67 ... +1,000 °F] ■ FKM, temperature range: -29 ...+180 °C [-20 ...+356 °F] ■ FKM AED 1) , temperature range: -46 ...+180 °C [-50 ...+356 °F] ■ RTFE 2) , temperature range: -55 ...+180 °C [-67 ...+356 °F] |  |
| Non-wetted parts |  |  |
| Gland nut, valve spindle, sealing bush, locking nut, locking pin | Stainless steel |  |
| Handle | ■ Stainless steel 303 (1.4305) |  |

| 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|
| Sealing packing | Max. allowable operating pressure at defined temperatures |  |  |  |
| Minimum temperature | Temperature of 0 °C [32 °F] | Temperature of 20 °C [68 °F] | Maximum temperature |  |
| PTFE | 690 bar at -55 °C | 690 bar | 690 bar | 276 bar at 210 °C |
| 10,000 psi at -67 °F | 10,000 psi | 10,000 psi | 4,000 psi at 410 °F |  |
| Polar PTFE | 690 bar at -70 °C | 690 bar | 690 bar | 276 bar at 210 °C |
| 10,000 psi at -94 °F | 10,000 psi | 10,000 psi | 4,000 psi at 410 °F |  |
| Graphite or SIGRAFLEX ® ZX graphite | 420 bar at -55 °C | 420 bar | 420 bar | 206 bar at 538 °C |
| 206 bar at -67 °F | 6,000 psi | 6,000 psi | 2,987 psi at 1,000 °F |  |
| FKM | 206 bar at -29 °C | 206 bar | 206 bar | 206 bar at 180 °C |
| 2,987 psi at -20 °F | 2,987 psi | 2,987 psi | 2,987 psi at 356 °F |  |
| FKM AED | 206 bar at -46 °C | 206 bar | 206 bar | 206 bar at 180 °C |
| 2,987 psi at -50 °F | 2,987 psi | 2,987 psi | 2,987 psi at 356 °F |  |
| RTFE 1) | 420 bar at -55 °C | 420 bar | 420 bar | 276 bar at 180 °C |
| 6,000 psi at -67 °F | 6,000 psi | 6,000 psi | 4,000 psi at 356 °F |  |

| Logo | Description | Country |
|---|---|---|
|  | EAC Pressure Equipment Directive | Eurasian Economic Community |
|  | DNV Ships, shipbuilding (e.g. offshore) | International |
| - | Bureau Veritas Ships, shipbuilding (e.g. offshore) | International |
| - | CRN Safety (e.g. electr. safety, overpressure, ...) | Canada |

| Logo | Description |
|---|---|
| - | Information on Pressure Equipment Directive (PED) Design, manufacturing and testing carried out in accordance with sound engineering practise |
| - | PMI 1) test certificate Valve body |
| - | Hydrogen for general use 2) Suitable for general hydrogen applications under the following conditions: - Material proof for all wetted parts per NACE MR0103/MR0175 - Temperature range -55 ...+210 °C [-67 ...+410 °F] - Max. allowable operating pressure: 6,000 psi [420 bar] at 20 °C [68 °F] - With fugitive emission protection in accordance with TA-Luft (VDI 2440) and ISO 15848-1 |
| - | Oil- and grease-free per ASTM G93-03 level C (< 66 mg/m 2 ) - Sealing packing and lubricants in accordance with BAM requirements - Suitable for oxygen applications under the following temperature and pressure conditions (BAM): PTFE sealing packing: T ≤ 150 °C [302 °F] p ≤ 20 bar [290 psi] Graphite sealing packing: T ≤ 250 °C [482 °F] p ≤ 150 bar [2,175 psi] |
| - | Type tested for fire safety in accordance with API 607, ISO 10497, BS 6755-2 3) |
| - | Fugitive emission protection in accordance with TA-Luft (VDI 2440) and ISO 15848-1 - Tightness class:AH - Endurance class:C01 - Temperature class: -29 ...+180 °C [-20 ...+356 °F] |

### Certificates

| Certificates | ■ 3.1 inspection certificate per EN 10204 - Material proof for all wetted parts per NACE MR0103/MR0175 - Confirmation of pressure tests per MSS SP-61 1) - Confirmation of pressure tests per API 598or API 6D |
|---|---|

| Description | Order number |
|---|---|
| Anti-tamper key, stainless steel 303 (1.4305) | 81640006 |
| Adapter ½NPT, female - ¾NPT, male, stainless steel 316/316L (1.4401/1.4404) | 81655622 |
| Adapter ½NPT, male - ¼NPT;female, stainless steel 316/316L (1.4401/1.4404) | 81655620 |
| Bleeder screw, stainless steel 316/316L (1.4401/1.4404) | 81506704 |
| Plug screw ½NPT, stainless steel 316/316L (1.4401/1.4404) | 81652353 |
| Plug screw ¼NPT, stainless steel 316/316L (1.4401/1.4404) | 81652350 |
| PTFE seal forG½ | 81652355 |
| Graphite seal forG½ | 81652602 |
| Adapter Minimess 1215 - ¼NPT, male, carbon steel | 81655625 |
| Adapter Minimess 1620 - G¼, male, stainless steel 316Ti (1.4571) | 14503075 |
| Swivel adapter ½NPT, male - ½NPT, female, max. pressure 10,000 psi [690 bar], stainless steel 316/316L (1.4401/1.4404) | 81655619 |
| Swivel adapter ½NPT, male - G½, female, with retaining ring, max. pressure 6,000 psi [420 bar], stainless steel 316/316L (1.4401/1.4404) | 81655624 |
| Swivel adapter G⅜A,male - G½A,male, max. pressure 6,000 psi [420 bar], stainless steel 316/316L (1.4401/1.4404) | 81655618 |
| Swivel adapter G⅜A,male - G¼A,male, max. pressure 6,000 psi [420 bar], stainless steel 316/316L (1.4401/1.4404) | 81655617 |
| Swivel adapter G⅜A,male - G½, female, with retaining ring, max. pressure 6,000 psi [420 bar], stainless steel 316/316L (1.4401/1.4404) | 81655621 |
| Swivel adapter G½, male - G½, female, with retaining ring, max. pressure 6,000 psi [420 bar], stainless steel 316/316L (1.4401/1.4404) | 81655623 |
| Adapter tube fitting 6 mmOD-¼NPT,male, stainless steel 316/316L (1.4401/1.4404) | 81643499 |
| Adapter tube fitting 10 mmOD-⅜NPT,female, stainless steel 316/316L (1.4401/1.4404) | 81643536 |
| Adapter tube fitting 6 mmOD-½NPT,female, stainless steel 316/316L (1.4401/1.4404) | 81643562 |
| Adapter tube fitting 12 mmOD-⅜NPT,male, stainless steel 316/316L (1.4401/1.4404) | 81643526 |

## מסמכים

- [ds_ac0922_en_co_4d5943](https://avigan.com.ua/wika/docs/wika/ds_ac0922_en_co.pdf) — PDF, 1144 KB, en

## תצורה

למוצר יש מגדיר תצורה אינטראקטיבי בעמוד המוצר.

```
IV1 0- S1D Z-L SZZZ-ZZ-NZZ
```