| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | SIEMENS |
| Моделі | 1PH7101-7NF, 1PH7103-7ND, 1PH7103-7NF, 1PH7103-7NG, 1PH7105-7NF, 1PH7107-7ND, 1PH7107-7NF, 1PH7107-7NG |
| Група обладнання | electrical |
| Мова документа | англійська |
| Розмір файлу | 0.3 МБ |
Про документ
Forced-ventilated asynchronous main spindle motors in shaft heights SH 100 to SH 225 for operation with the SIMODRIVE 611 converter system. Available as solid-shaft core type (SH 100 to SH 160) and standard type motors with a wide choice of type of construction, bearing version and options via order-code suffixes.
Ключові дані
| Shaft heights | SH 100 to SH 225 |
|---|---|
| Standard | IEC 60034-1 |
| Degree of protection | IP55, fan IP54 |
| Encoder system | Incremental encoder sin/cos 1 Vpp without C and D tracks (SH 180: 2 048 S/R) |
| Duty types | S1, S6-60 %, S6-40 %, S2-30 min |
| Rated power S1 | 3.7 … 100 kW |
| Rated speed | 500 … 2 500 rpm |
| Maximum speed nmax | 5 500 … 12 000 rpm |
Застосування
- Main spindle drives on machine tools, operated with SIMODRIVE 611 power modules
- ZF gearbox mounting prepared versions (see Gearboxes selection)
Особливості
- Forced ventilation by external fan unit (heavy-gauge threaded or metric cable entry)
- Incremental encoder sin/cos 1 Vpp feedback
- Duty types S1, S6-60 %, S6-40 %, S2-30 min
- Types of construction IM B3 / IM B35 variants incl. hoisting systems and flange D = 450 mm (only 1PH7184)
- Bearing versions for coupling/belt output, increased cantilever force and increased maximum speed
- Vibration magnitude grades R, S, SR; shaft sealing ring option (not possible with increased maximum speed)
- Paint finish unpainted, primed, anthracite, anthracite two coats
Технічні дані
| Parameter | Value |
|---|---|
| Motor series | 1PH7 asynchronous motor, solid shaft |
| Shaft heights | SH 100, SH 132, SH 160, SH 180, SH 225 |
| Standard | IEC 60034-1 |
| Ventilation | Forced ventilation (external fan unit) |
| Rated speeds (nrated) | 500 … 2 500 rpm depending on model |
| Continuous speed, max., standard type SH 100 | 5 500 rpm (bearing version for coupling/belt output); 10 000 rpm (bearing version for increased maximum speed) |
| Continuous speed, max., standard type SH 132 | 4 500 rpm; 8 500 rpm |
| Continuous speed, max., standard type SH 160 | 3 700 rpm; 7 000 rpm |
| Continuous speed, max., standard type SH 180 | 3 000 rpm; 4 500 rpm; 5 000 rpm |
| Continuous speed, max., standard type SH 225 | 2 700 rpm; 3 600 rpm; 4 500 rpm |
| Maximum speed nmax, standard type | 12 000 rpm (SH 100), 10 000 rpm (SH 132), 8 000 rpm (SH 160), 7 000 rpm (SH 180), 5 500 rpm (SH 225) |
| Maximum speed nmax, core type | 9 000 rpm (SH 100), 8 000 rpm (SH 132), 6 500 rpm (SH 160) |
| Rated power S1 | 3.7 … 100 kW |
| Rated power S6-60 % / S6-40 % / S2-30 min | per duty table, e.g. SH 225: S6-40 % up to 140 kW (1PH7224-.NF) |
| Rated torque Mrated | 23.6 … 750 Nm |
| Moment of inertia J | 0.017 … 1.48 kgm2 |
| Weight approx. | 43 … 650 kg |
| Encoder system | Incremental encoder sin/cos 1 Vpp without C and D tracks; SH 180: 2 048 S/R |
| Type of construction | IM B3 (IM V5, IM V6), IM B5 (IM V1, IM V3), IM B35 (IM V15, IM V35); hoisting system and flange D = 450 mm variants (SH 180/225) |
| Terminal box/cable entry | Top/right, Top/DE, Top/NDE, Top/left |
| Degree of protection | IP55, fan IP54 |
| Seal | –, or DE flange with shaft sealing ring |
| Paint finish | Unpainted, Primed, Anthracite, Anthracite two coats |
| Blow-out direction | Axial (A/B/D/K/J), Right (C/J for SH 180/225) |
Варіанти замовлення
Selection and ordering data per motor type, e.g. 1PH7103 - 7 ND02 - 0C (core type) and 1PH7103 - 7 ND 77 - 07 77 (standard type). Code positions cover fan unit (2/7), encoder system (N), terminal box position, type of construction, bearing/vibration grade, shaft extension/balancing/blow-out direction, seal and paint finish. SIMODRIVE 611 power module rated output currents: see Converter system.
Допуски та стандарти
- IEC 60034-1
Текст документа
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 core type motors
SH 100 to SH 160
■ Selection and ordering data
Shaft Rated Continuous Speed, max.1) Rated power 1PH7 asynchronous motor
height speed speed, max. for duty type with solid shaft
in accordance with IEC 60034-1 Forced ventilation
Core type
SH nrated nS1 cont.2) nS1 cont.3) nmax nmax4) Prated
S1 S6-60 % S6-40 % S2-30 min
rpm rpm rpm rpm rpm kW kW kW kW Order No.
(HP) (HP) (HP) (HP)
100 2 000 5 500 – 9 000 – 7 (9) 8.5 (11.4) 10 (13) 9.25 (12.4) 1PH7103 - 7 NG02 - 0C 7 7
1 500 5 500 – 9 000 – 9 (12) 11 (14.8) 13 (17) 12 (16) 1PH7107 - 7 NF02 - 0C 7 7
132 1 000 4 500 – 8 000 – 12 (16) 15 (20) 18.5 (24.8) 16 (21) 1PH7133 - 7 ND02 - 0C 7 7
2 000 20 (27) 25 (34) 30 (40) 27.5 (36.9) 1PH7133 - 7 NG02 - 0C 7 7
1 000 4 500 – 8 000 – 17 (23) 20.5 (27.5) 25 (34) 22.5 (30.2) 1PH7137 - 7 ND02 - 0C 7 7
2 000 28 (38) 35 (47) 43 (58) 39 (52) 1PH7137 - 7 NG02 - 0C7 7
160 1 000 3 700 – 6 500 – 22 (30) 27 (36) 33 (44) 30 (40) 1PH7163 - 7 ND03 - 0C 7 7
1 500 30 (40) 37 (50) 45 (60) 41 (55) 1PH7163 - 7 N F03 - 0C7 7
1 500 3 700 – 6 500 – 37 (50) 46 (62) 56 (75) 51 (68) 1PH7167 - 7 NF03 - 0C 7 7
Fans: External fan unit, heavy-gauge threaded cable entry in terminal box 2
External fan unit, metric cable entry in terminal box 7
Encoder system: Incremental encoder sin/cos 1 Vpp without C and D tracks N
Type of construction:5) IM B5 (IM V1, IM V3) 2
IM B35 (IM V15, IM V35)6) 3
Shaft extension DE:5) Balancing: Direction of air flow (fan): Blow-out direction:
7 Fitted key
Plain shaft
Half-key
–
DE → NDE
DE → NDE
Axial
Axial
A
J
Degree of protection: Paint finish:
IP55, fan IP54 Unpainted 0
IP55, fan IP54 Anthracite 3
To select the type of construction, see Selection guides.
7/6 Siemens NC 60 · 2009
© Siemens AG 2009
NC60_en_Kap07_04.fm Seite 7 Sonntag, 26. Juli 2009 5:34 17
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 core type motors
SH 100 to SH 160
■ Selection and ordering data
Motor type Rated Moment of Weight, Rated current SIMODRIVE 611 power module
(continued) torque inertia approx. for duty type
in accordance with IEC 60034-1 Rated
output
current7)
Mrated J m Irated Irated
S1 S6-60 % S6-40 % S2-30 min S1
Nm kgm2 kg A A A A A Order No.
(lbf -ft) (lbf -in-s2) (lb)
1PH7103-.NG02-.... 33.4 (24.6) 0.017 (0.148) 43 (95) 17.5 20.5 23.5 21.5 24 For ordering data,
see Converter system
1PH7107-.NF02-.... 57.3 (42.2) 0.029 (0.252) 64 (141) 23.5 27.5 31 29 24
1PH7133-.ND02-.... 114.6 (84.5) 0.076 (0.66) 102 (225) 30 36 43 37.5 30
1PH7133-.NG02-.... 95.5 (70.4) 0.076 (0.66) 102 (225) 45 54 63 59 45
1PH7137-.ND02-.... 162.3 (119.6) 0.109 (0.946) 129 (284) 43 50 60 54 45
1PH7137-.NG02-.... 133.7 (98.5) 0.109 (0.946) 129 (284) 60 73 87 80 60
1PH7163-.ND03-.... 210.1 (154.8) 0.19 (1.649) 198 (437) 55 65 77 71 60
1PH7163-.NF03-.... 191.0 (140.8) 0.19 (1.649) 198 (437) 72 86 102 94 85
1PH7167-.NF03-.... 235.5 (173.6) 0.23 (1.996) 231 (509) 82 97 115 104 85
7
1PH7 motor (SH 100 to SH 160)
1) For continuous duty (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle time of 10 min. For maintenance intervals for motors and
components, see 1PH Motors Configuration Manual.
2) Bearing version for coupling/belt output.
3) Bearing version for increased maximum speed.
4) Version for increased maximum speed only possible with vibration magnitude grade SR. The following option is not possible: Shaft seal.
5) The following motor versions are required for ZF gearbox mounting prepared (see Gearboxes for gear selection):
Shaft with fitted key and full-key balancing.
6) Motors of shaft height 160 and higher require foot support.
7) With default setting of the pulse frequency.
Siemens NC
Siemens
60 · NC
2009
60 ·
(07.09)
2009 7/7
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 standard type motors
SH 100
■ Selection and ordering data
Shaft Rated Continuous Speed, max.1) Rated power 1PH7 asynchronous motor
height speed speed, max. for duty type with solid shaft
in accordance with IEC 60034-1 Forced ventilation
Standard type
SH nrated nS1 cont.2) nS1 cont.3) nmax nmax4) Prated
S1 S6-60 % S6-40 % S2-30 min
rpm rpm rpm rpm rpm kW kW kW kW Order No.
(HP) (HP) (HP) (HP)
100 1 500 5 500 10 000 9 000 12 000 3.7 (5) 4.5 (6) 5.25 (7.04) 4.9 (6.6) 1PH7101 - 7 NF 7 7 - 07 7 7
1 000 5 500 10 000 9 000 12 000 3.7 (5) 4.5 (6) 5.25 (7.04) 4.7 (6.3) 1PH7103 - 7 ND 7 7 - 0 7 7 7
1 500 5.5 (7.4) 6.7 (9) 7.7 (10.3) 7 (9.4) 1PH7103 - 7 NF 7 7 - 07 7 7
2 000 7 (9) 8.5 (11.4) 10 (13) 9.25 (12.4) 1PH7103 - 7 NG7 7 - 07 7 7
1 500 5 500 10 000 9 000 12 000 7 (9) 8.5 (11.4) 10 (13) 9.25 (12.4) 1PH7105 - 7 NF 7 7 - 07 7 7
1 000 5 500 10 000 9 000 12 000 6.25 (8.38) 7.5 (10) 8.8 (11.8) 7.75 (10.39) 1PH7107 - 7 ND 7 7 - 0 7 7 7
1 500 9 (12) 11 (15) 13 (17) 12 (16) 1PH7107 - 7 NF 7 7 - 07 7 7
2 000 10.5 (14) 12.5 (17) 14.5 (19.4) 13.5 (18.1) 1PH7107 - 7 NG7 7 - 07 7 7
Fans: External fan unit, heavy-gauge threaded cable entry in terminal box 2
External fan unit, metric cable entry in terminal box 7
Encoder system: Incremental encoder sin/cos 1 Vpp without C and D tracks N
Terminal box/ Top/right 0
Cable entry: Top/NDE 2
Top/left 3
Type of IM B3 (IM V5, IM V6) 0
construction:5) IM B5 (IM V1, IM V3) 2
IM B35 (IM V15, IM V35) 3
7 Bearing version for: Vibration magnitude: Shaft and flange accuracy:
Coupling/belt output Grade R Tolerance R B
Coupling/belt output Grade S Tolerance R C
Coupling/belt output Grade SR Tolerance R D
Increased speed Grade SR Tolerance R L
(coupling/belt output)
Shaft extension DE:5) Balancing: Direction of air flow (fan): Blow-out direction:
Fitted key Half-key DE → NDE Axial A
Fitted key Half-key NDE → DE Axial B
Fitted key Full-key DE → NDE Axial C
Fitted key Full-key NDE → DE Axial D
Plain shaft – DE → NDE Axial J
Plain shaft – NDE → DE Axial K
Degree of protection: Seal: Paint finish:
IP55, fan IP54 – Unpainted 0
IP55, fan IP54 DE flange with Unpainted 2
shaft sealing ring6)
IP55, fan IP54 – Anthracite 3
IP55, fan IP54 DE flange with Anthracite 5
shaft sealing ring6)
IP55, fan IP54 – Anthracite, two coats 6
IP55, fan IP54 DE flange with Anthracite, two coats 8
shaft sealing ring6)
To select the type of construction and the degree of protection, see Selection guides.
7/8 Siemens NC 60 · 2009
© Siemens AG 2009
NC60_en_Kap07_04.fm Seite 9 Sonntag, 26. Juli 2009 5:38 17
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 standard type motors
SH 100
■ Selection and ordering data
Motor type Rated Moment of Weight, Rated current SIMODRIVE 611 power module
(continued) torque inertia approx. for duty type
in accordance with IEC 60034-1 Rated
output
current7)
Mrated J m Irated Irated
S1 S6-60 % S6-40 % S2-30 min S1
Nm kgm2 kg A A A A A Order No.
(lbf -ft) (lbf -in-s2) (lb)
1PH7101-.NF... 23.6 (17.4) 0.017 (0.150) 43 (95) 10 11.5 12.5 12 24 For ordering data,
see Converter system
1PH7103-.ND... 35.3 (26) 0.017 (0.150) 43 (95) 10 11.5 13 12 24
1PH7103-.N F... 35.0 (25.8) 0.017 (0.150) 43 (95) 13 16 18 16.5 24
1PH7103-.NG... 33.4 (24.6) 0.017 (0.150) 43 (95) 17.5 20.5 23.5 21.5 24
1PH7105-.N F... 44.6 (32.9) 0.029 (0.257) 64 (141) 17.5 21 23.5 22 24
1PH7107-.ND... 59.7 (44) 0.029 (0.257) 64 (141) 17.5 20.5 23 21 24
1PH7107-.N F... 57.3 (42.2) 0.029 (0.257) 64 (141) 23.5 27.5 31 29 24
1PH7107-.NG... 50.1 (36.9) 0.029 (0.257) 64 (141) 26 28.5 33 31 30
7
1PH7 motor (SH 100 to SH 160)
1) For continuous duty (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle time of 10 min. For maintenance intervals for motors and
components, see the 1PH Motors Configuration Manual.
2) Bearing version for coupling/belt output.
3) Bearing version for increased maximum speed.
4) Version for increased maximum speed only possible with vibration magnitude grade SR. The following option is not possible: Shaft sealing ring.
5) The following motor versions are required for ZF gearbox mounting prepared (see Gearboxes for gear selection):
• Types of construction IM B5 or IM B35
• Shaft with fitted key and full-key balancing.
6) Only appropriate if the sealing ring is occasionally lubricated with oil spray/mist. A sealing ring is not possible with increased maximum speed.
7) With default setting of the pulse frequency.
Siemens NC
Siemens
60 · NC
2009
60 ·
(07.09)
2009 7/9
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 standard type motors
SH 132
■ Selection and ordering data
Shaft Rated Continuous Speed, max.1) Rated power 1PH7 asynchronous motor
height speed speed, max. for duty type with solid shaft
in accordance with IEC 60034-1 Forced ventilation
Standard type
SH nrated nS1 cont.2) nS1 cont.3) nmax nmax4) Prated
S1 S6-60 % S6-40 % S2-30 min
rpm rpm rpm rpm rpm kW kW kW kW Order No.
(HP) (HP) (HP) (HP)
132 1 500 4 500 8 500 8 000 10 000 11 (15) 13.5 (18.1) 16.5 (22.1) 15 (20) 1PH7131 - 7 NF 7 7 - 07 7 7
1 000 4 500 8 500 8 000 10 000 12 (16) 15 (20) 18.5 (24.8) 16 (22) 1PH7133 - 7 ND 7 7 - 07 7 7
1 500 15 (20) 18.5 (24.8) 23 (31) 20.5 (27.5) 1PH7133 - 7 N F 7 7 - 07 7 7
2 000 20 (27) 25 (34) 30 (40) 27.5 (36.9) 1PH7133 - 7 N G7 7 - 07 7 7
1 500 4 500 8 500 8 000 10 000 18.5 (24.8) 23 (31) 28 (38) 25.5 (34.2) 1PH7135 - 7 NF 7 7 - 07 7 7
1 000 4 500 8 500 8 000 10 000 17 (23) 20.5 (27.5) 25 (34) 22.5 (30.2) 1PH7137 - 7 N D 7 7 - 0 7 7 7
1 500 22 (30) 27.5 (36.9) 33 (44) 30 (40) 1PH7137 - 7 NF 7 7 - 07 7 7
2 000 28 (38) 35 (47) 43 (58) 39 (52) 1PH7137 - 7 NG7 7 - 07 7 7
Fans: External fan unit, heavy-gauge threaded cable entry in terminal box 2
External fan unit, metric cable entry in terminal box 7
Encoder system: Incremental encoder sin/cos 1 Vpp without C and D tracks N
Terminal box/ Top/right 0
Cable entry: Top/NDE 2
Top/left 3
Type of IM B3 (IM V5, IM V6) 0
construction:5) IM B5 (IM V1, IM V3) 2
IM B35 (IM V15, IM V35) 3
7 Bearing version for: Vibration magnitude: Shaft and flange accuracy:
Coupling/belt output Grade R Tolerance R B
Coupling/belt output Grade S Tolerance R C
Coupling/belt output Grade SR Tolerance R D
Increased speed Grade SR Tolerance R L
(coupling/belt output)
Shaft extension DE:5) Balancing: Direction of air flow (fan): Blow-out direction:
Fitted key Half-key DE → NDE Axial A
Fitted key Half-key NDE → DE Axial B
Fitted key Full-key DE → NDE Axial C
Fitted key Full-key NDE → DE Axial D
Plain shaft – DE → NDE Axial J
Plain shaft – NDE → DE Axial K
Degree of protection: Seal: Paint finish:
IP55, fan IP54 – Unpainted 0
IP55, fan IP54 DE flange with Unpainted 2
shaft sealing ring6)
IP55, fan IP54 – Anthracite 3
IP55, fan IP54 DE flange with Anthracite 5
shaft sealing ring6)
IP55, fan IP54 – Anthracite, two coats 6
IP55, fan IP54 DE flange with Anthracite, two coats 8
shaft sealing ring6)
To select the type of construction and the degree of protection, see Selection guides.
7/10 Siemens NC 60 · 2009
© Siemens AG 2009
NC60_en_Kap07_04.fm Seite 11 Sonntag, 26. Juli 2009 5:39 17
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 standard type motors
SH 132
■ Selection and ordering data
Motor type Rated Moment of Weight, Rated current SIMODRIVE 611 power module
(continued) torque inertia approx. for duty type
in accordance with IEC 60034-1 Rated
output
current7)
Mrated J m Irated Irated
S1 S6-60 % S6-40 % S2-30 min S1
Nm kgm2 kg A A A A A Order No.
(lbf -ft) (lbf -in-s2) (lb)
1PH7131-.NF... 70.0 (51.6) 0.076 (0.673) 102 (225) 24 29 34 31.5 24 For ordering data,
see Converter system
1PH7133-.ND... 114.6 (84.5) 0.076 (0.673) 102 (225) 30 36 43 37.5 30
1PH7133-.NF... 95.5 (70.4) 0.076 (0.673) 102 (225) 34 41 49 43.5 45
1PH7133-.NG... 95.5 (70.4) 0.076 (0.673) 102 (225) 45 54 63 59 45
1PH7135-.NF... 117.8 (86.8) 0.109 (0.965) 129 (284) 42 50 58 54 45
1PH7137-.ND... 162.3 (119.6) 0.109 (0.965) 129 (284) 43 50 60 54 45
1PH7137-.NF... 140.1 (103.3) 0.109 (0.965) 129 (284) 57 68 79 73 60
1PH7137-.NG... 133.7 (98.5) 0.109 (0.965) 129 (284) 60 73 87 80 60
7
1PH7 motor (SH 100 to SH 160)
1) For continuous duty (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle time of 10 min. For maintenance intervals for motors and
components, see the 1PH Motors Configuration Manual.
2) Bearing version for coupling/belt output.
3) Bearing version for increased maximum speed.
4) Version for increased maximum speed only possible with vibration magnitude grade SR. The following option is not possible: Shaft sealing ring.
5) The following motor versions are required for ZF gearbox mounting prepared (see Gearboxes for gear selection):
• Types of construction IM B5 or IM B35
• Shaft with fitted key and full-key balancing.
6) Only appropriate if the sealing ring is occasionally lubricated with oil spray/mist. A sealing ring is not possible with increased maximum speed.
7) With default setting of the pulse frequency.
Siemens NC
Siemens
60 · NC
2009
60 ·
(07.09)
2009 7/11
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 standard type motors
SH 160
■ Selection and ordering data
Shaft Rated Continuous Speed, max.1) Rated power 1PH7 asynchronous motor
height speed speed, max. for duty type with solid shaft
in accordance with IEC 60034-1 Forced ventilation
Standard type
SH nrated nS1 cont.2) nS1 cont.3) nmax nmax4) Prated
S1 S6-60 % S6-40 % S2-30 min
rpm rpm rpm rpm rpm kW kW kW kW Order No.
(HP) (HP) (HP) (HP)
160 500 3 700 7 000 6 500 8 000 12 (16) 15 (20) 18 (24) 16.5 (22.1) 1PH7163 - 7 N B 7 7 - 07 7 7
1 000 22 (30) 27 (36) 33 (44) 30 (40) 1PH7163 - 7 N D 7 7 - 07 7 7
1 500 30 (40) 37 (50) 45 (60) 41 (55) 1PH7163 - 7 N F 7 7 - 0 7 7 7
2 000 36 (48) 44 (59) 52 (70) 48 (64) 1PH7163 - 7 N G7 7 - 07 7 7
500 3 700 7 000 6 500 8 000 16 (21) 19.5 (26.2) 24 (32) 21.5 (28.8) 1PH7167 - 7 N B 7 7 - 07 7 7
1 000 28 (38) 34.5 (46.3) 42 (56) 38 (51) 1PH7167 - 7 N D 7 7 - 07 7 7
1 500 37 (50) 46 (62) 56 (75) 51 (68) 1PH7167 - 7 N F 7 7 - 07 7 7
2 000 41 (55) 51 (69) 61 (81) 56 (75) 1PH7167 - 7 N G7 7 - 07 7 7
Fans: External fan unit, heavy-gauge threaded cable entry in terminal box 2
External fan unit, metric cable entry in terminal box 7
Encoder system: Incremental encoder sin/cos 1 Vpp without C and D tracks N
Terminal box/ Top/right 0
Cable entry: Top/NDE 2
Top/left 3
Type of IM B3 (IM V5, IM V6) 0
construction:5) IM B35 (IM V15, IM V35)7) 3
7
Bearing version for: Vibration magnitude: Shaft and flange accuracy:
Coupling/belt output Grade R Tolerance R B
Coupling/belt output Grade S Tolerance R C
Coupling/belt output Grade SR Tolerance R D
Increased speed Grade SR Tolerance R L
(coupling/belt output)
Shaft extension DE:5) Balancing: Direction of air flow (fan): Blow-out direction:
Fitted key Half-key DE → NDE Axial A
Fitted key Half-key NDE → DE Axial B
Fitted key Full-key DE → NDE Axial C
Fitted key Full-key NDE → DE Axial D
Plain shaft – DE → NDE Axial J
Plain shaft – NDE → DE Axial K
Degree of protection: Seal: Paint finish:
IP55, fan IP54 – Unpainted 0
IP55, fan IP54 DE flange with Unpainted 2
shaft sealing ring6)
IP55, fan IP54 – Anthracite 3
IP55, fan IP54 DE flange with Anthracite 5
shaft sealing ring6)
IP55, fan IP54 – Anthracite, two coats 6
IP55, fan IP54 DE flange with Anthracite, two coats 8
shaft sealing ring6)
To select the type of construction and the degree of protection, see Selection guides.
7/12 Siemens NC 60 · 2009
© Siemens AG 2009
NC60_en_Kap07_04.fm Seite 13 Sonntag, 26. Juli 2009 5:41 17
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 standard type motors
SH 160
■ Selection and ordering data
Motor type Rated Moment of Weight, Rated current SIMODRIVE 611 power module
(continued) torque inertia approx. for duty type
in accordance with IEC 60034-1 Rated
output
current8)
Mrated J m Irated Irated
S1 S6-60 % S6-40 % S2-30 min S1
Nm kgm2 kg A A A A A Order No.
(lbf -ft) (lbf -in-s2) (lb)
1PH7163-.NB... 229.2 (168.9) 0.19 (1.682) 198 (437) 30 36 42 39 30 For ordering data,
1PH7163-.ND... 210.1 (154.8) 0.19 (1.682) 198 (437) 55 65 77 71 60 see Converter system
1PH7163-.NF... 191.0 (140.8) 0.19 (1.682) 198 (437) 72 86 102 94 85
1PH7163-.NG... 171.9 (126.7) 0.19 (1.682) 198 (437) 85 100 114 107 85
1PH7167-.NB... 305.5 (225.2) 0.23 (2.036) 231 (509) 37 44 53 48 45
1PH7167-.ND... 267.4 (197.1) 0.23 (2.036) 231 (509) 71 85 100 92 85
1PH7167-.NF... 235.5 (173.6) 0.23 (2.036) 231 (509) 82 97 115 104 85
1PH7167-.NG... 195.8 (144.3) 0.23 (2.036) 231 (509) 89 106 124 115 120
7
1PH7 motor (SH 100 to SH 160)
1) For continuous duty (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle time of 10 min. For maintenance intervals for motors and
components, see the 1PH Motors Configuration Manual.
2) Bearing version for coupling/belt output.
3) Bearing version for increased maximum speed.
4) Version for increased maximum speed only possible with vibration magnitude grade SR. The following option is not possible: Shaft sealing ring.
5) The following motor versions are required for ZF gearbox mounting prepared (see Gearboxes for gear selection):
• Types of construction IM B5 or IM B35
• Shaft with fitted key and full-key balancing.
6) Only appropriate if the sealing ring is occasionally lubricated with oil spray/mist. A sealing ring is not possible with increased maximum speed.
7) Motors of shaft height 160 and higher require foot support.
8) With default setting of the pulse frequency.
Siemens NC
Siemens
60 · NC
2009
60 ·
(07.09)
2009 7/13
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 standard type motors
SH 180
■ Selection and ordering data
Shaft Rated Continuous Speed, Rated power 1PH7 asynchronous motor
height speed speed, max. max.1) for duty type with solid shaft
in accordance with IEC 60034-1 Forced ventilation
Standard type
5)
SH nrated nS1 cont.2) nS1 cont.3) nS1 cont.4) nmax nmax Prated
S1 S6-60 % S6-40 % S2-30 min
rpm rpm rpm rpm rpm rpm kW kW kW kW Order No.
(HP) (HP) (HP) (HP)
180 500 3 500 3 000 4 500 5 000 7 000 21.5 (28.8) 26.5 (35.5) 30.5 (40.9) 30 (40) 1PH7184 - 7 NT7 7 - 0 7 7 7
1 000 39 (52) 48 (64) 58 (78) 58 (78) 1PH7184 - 7 N D7 7 - 07 7 7
1 250 40 (54) 50 (57) 56 (75) 66 (89) 1PH7184 - 7 N E7 7 - 07 7 7
1 500 51 (68) 68 (91) 81 (109) 81 (68) 1PH7184 - 7 N F7 7 - 07 7 7
2 500 78 (105) 97 (130) 115 (154) 115 (154) 1PH7184 - 7 N L7 7 - 07 7 7
500 3 500 3 000 4 500 5 000 7 000 29.6 (39.7) 36.5 (49) 43 (58) 38 (51) 1PH7186 - 7 N T7 7 - 07 7 7
1 000 51 (68) 65 (87) 77 (103) 77 (103) 1PH7186 - 7 N D7 7 - 07 7 7
1 250 60 (80) 71 (95) 80 (107) 84 (113) 1PH7186 - 7 N E7 7 - 07 7 7
Fans: External fan unit, heavy-gauge threaded cable entry in terminal box 2
External fan unit, metric cable entry in terminal box 7
Encoder system: Incremental encoder sin/cos 1 Vpp, 2 048 S/R without C or D tracks N
Terminal box/ Top/right 0
Cable entry: Top/DE 1
Top/NDE 2
Top/left 3
Type of construction: IM B3 0
IM B3 (IM V5, IM V6) (hoisting system for vertical types of construction) 1
IM B359) 3
7
IM B35 (flange D= 450 mm (17.72), only for 1PH7184)9) 4
IM B35 (IM V15, IM V35) (hoisting system for vertical types of construction)9) 5
IM B35 (IM V15, IM V35) (flange D = 450 mm (17.72), only for 1PH7184)9) 6
Bearing version for: Vibration magnitude: Shaft and flange accuracy:
Coupling output Grade R Tolerance N A
Coupling output Grade R Tolerance R B
Coupling output Grade S Tolerance R C
Coupling output Grade SR Tolerance R D
Belt output Grade R Tolerance N E
Belt output Grade R Tolerance R F
Increased cantilever force (belt output) Grade R Tolerance N G
Increased cantilever force (belt output) Grade R Tolerance R H
Increased speed (coupling output) Grade S Tolerance R J
Shaft extension DE:7) Balancing: Direction of air flow (fan): Blow-out direction:
Fitted key Half-key DE → NDE Right A
Fitted key Half-key NDE → DE Axial B
Fitted key Full-key DE → NDE Right C
Fitted key Full-key NDE → DE Axial D
Plain shaft – DE → NDE Right J
Plain shaft – NDE → DE Axial K
Degree of protection: Seal: Paint finish:
IP55, fan IP54 – Primed 0
IP55, fan IP54 DE flange with shaft sealing ring6) Primed 2
IP55, fan IP54 – Anthracite 3
IP55, fan IP54 DE flange with shaft sealing ring6) Anthracite 5
IP55, fan IP54 – Anthracite, two coats 6
IP55, fan IP54 DE flange with shaft sealing ring6) Anthracite, two coats 8
To select the type of construction and the degree of protection, see Selection guides.
7/14 Siemens NC 60 · 2009
© Siemens AG 2009
Asynchronous motors
Main spindle motors for SIMODRIVE 611
1PH7 standard type motors
SH 180
■ Selection and ordering data
Motor type Rated Moment of Weight, Rated current SIMODRIVE 611 power module
(continued) torque inertia approx.8) for duty type
in accordance with IEC 60034-1 Rated
output
current10)
Mrated J m Irated Irated
S1 S6-60 % S6-40 % S2 30 min S1
Nm kgm2 kg A A A A A Order No.
(lbf -ft) (lbf -in-s2) (lb)
1PH7184-.NT... 410 (302) 0.5 (4.425) 390 (860) 76 90 103 102 85 For ordering data,
1PH7184-.N D... 372 (274) 0.5 (4.425) 90 106 126 126 120 see Converter system
1PH7184-.N E... 305 (225) 0.5 (4.425) 85 100 110 128 85
1PH7184-.N F... 325 (240) 0.5 (4.425) 120 149 174 174 120
1PH7184-.N L... 298 (220) 0.5 (4.425) 172 204 237 237 200
1PH7186-.N T... 565 (416) 0.67 (5.930) 460 (1 014) 105 126 147 130 120
1PH7186-.N D... 487 (359) 0.67 (5.930) 118 141 164 164 120
1PH7186-.N E... 458 (338) 0.67 (5.930) 120 135 150 156 120
7
1PH7 motor (SH 180 and SH 225)
1) For continuous duty (with 30 % nmax, 60 % 2/3 nmax, 10 % standstill) for a duty cycle time of 10 min. For maintenance intervals for motors and
components, see the 1PH Motors Configuration Manual.
2) Bearing version for coupling/belt output.
3) Bearing version for increased cantilever force.
4) Bearing version for increased maximum speed.
5) Version for increased maximum speed, only possible in combination with vibration magnitude grade S. The following option is not possible:
Shaft sealing ring.
6) Only appropriate if the sealing ring is occasionally lubricated with oil spray/mist. A sealing ring is not possible for type of construction IM B3
(IM V5, IM V6), version with increased cantilever force or increased maximum speed.
7) The following motor versions are required for ZF gearbox mounting prepared (see Gearboxes for gear selection):
• Type of construction IM B35, IM V15 (not IM V35)
• Shaft with fitted key and full-key balancing
• Bearing version for coupling output
• Shaft and flange accuracy R
• DE flange with shaft sealing ring
8) Applies to type of construction IM B35, as type of construction IM B3, the motor is 20 kg (44 lb) lighter.
9) Motors of shaПоказано початок документа. Повний текст — у PDF за посиланням вище.
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.