| Вид документа | Технічний документ |
|---|---|
| Виробник | SIEMENS |
| Код документа | Catalog-D-11 |
| Сторінок | 204 |
| Мова документа | англійська |
| Розмір файлу | 24.2 МБ |
Текст документа
© Siemens 2023
Catalog Edition
D 11 2023
MOTION CONTROL DRIVES
SINAMICS G130
&RQYHUWHU %XLOW LQ 8QLWV
SINAMICS G150
&RQYHUWHU &DELQHW 8QLWV
siemens.com/d11
© Siemens 2023
Related catalogs
SINAMICS G180 D 18.1 Industrial Controls IC 10
Converters – Compact Units, Cabinet Systems, SIRIUS
Cabinet Units Air-Cooled and Liquid-Cooled
E86060-K5518-A111-A3-7600 PDF (E86060-K1010-A101-B5-7600)
SINAMICS S120 D 21.3 Industrial Communication IK PI
Chassis Format Converter Units SIMATIC NET
Chassis-2 Format Converter Units
Cabinet Modules, Cabinet Modules-2
SINAMICS S150
Converter Cabinet Units
PDF (E86060-K5521-A131-A8-7600) E86060-K6710-A101-B8-7600
Motion Control Drives D 21.4 Low-Voltage Power Distribution and LV 10
SINAMICS S120 and SIMOTICS Electrical Installation Technology
SENTRON • SIVACON • ALPHA
E86060-K5521-A141-A1-7600 PDF (E86060-K8280-A101-B7-7600)
Motion Control Drives D 31.1 SiePortal
SINAMICS Inverters for Single-Axis Drives Information and Ordering Platform
Built-In Units on the Internet
PDF (E86060-K5531-A111-A4-7600) sieportal.siemens.com
Motion Control Drives D 31.2
SINAMICS Converters for Single-Axis Drives
Distributed Converters The Engineering Manual
SINAMICS Low Voltage Engineering Manual
PDF (E86060-K5531-A121-A3-7600)
Engineering Manual for
- SINAMICS G130 Converter Built-in Units,
SINAMICS Drives D 35 - SINAMICS G150 Converter Cabinet Units,
SINAMICS G120P and - SINAMICS S120 Chassis Units,
SINAMICS G120P Cabinet - SINAMICS S120 Cabinet Modules,
pump, fan, compressor converters - SINAMICS S150 Converter Cabinet Units
PDF (E86060-K5535-A101-A5-7600) This manual offers users comprehensive support with the
configuring of drives and associated system components.
Motion Control System PM 21 The first three chapters deal mainly with the fundamental physical
SIMOTION principles of variable-speed drives and with directives and basic
Equipment for Production Machines information for EMC and include general system descriptions and
general engineering information.
The other chapters then discuss in detail questions relating to th
E86060-K4921-A101-A4-7600 dimensioning of drives as well as the selection of suitable motors.
Note:
The manual is not available in hard copy form, but only as an
electronic file in PDF format.
SINAMICS G130 Converter Built-in Units
© Siemens 2023
SINAMICS G150 Converter Cabinet Units
Motion Control Drives
System overview
1
Highlights
2
SINAMICS G130 converter built-in units
75 kW to 800 kW
3
Catalog D 11 · 2023
Supersedes:
Catalog D 11 · 2015
Refer to SiePortal for current updates of this catalog: SINAMICS G150 converter cabinet units
75 kW to 2700 kW
4
sieportal.siemens.com
Please contact your local Siemens branch.
© Siemens 2023
Tools and configuration
5
Services and documentation
6
Appendix
7
The products and systems described in this
catalog are manufactured/distributed under
application of a certified quality management
system in accordance with EN ISO 9001
and EN ISO 14001 (Certified Registration
No. 002241 QM UM). The certificate is recog-
nized by all IQNet countries.
© Siemens 2023
Digitalization in drive technology
From the digital world to the real world
siemens.com/digital-drives
Increase your transparency and productivity by digitalizing your drive technology
Many drives are used in the manufacturing and process industries. They produce lots of data anyway – why not use them
to increase the availability and productivity of machines and plants?
Drive technology offers the ideal entry point into the world of digitalization – for plant and machine builders as well as
for users.
The digitalization portfolio for the drive train spans over the complete life cycle – from the design phase to realization
and optimization – in the digital and the real world.
Our portfolio contains drive simulation solutions and efficient engineering tools, comprehensive connectivity that allows
drives to be easily linked to the relevant platforms as well as smart analytics (e.g. cloud and edge apps) and drive system
services.
These solutions enable you to gain a better understanding of processes, states and utilization. The health status of the
drive train can be monitored and analyzing drive data enables an early detection of anomalies and reduces downtimes.
This way, availability and productivity of machines and plants can be increased and the actual maintenance demand can
be identified. Furthermore, data-based business models and service offerings are facilitated.
Our digitalization portfolio covers all phases of the life cycle:
from the design phase to realization and optimization. It covers the digital and the real drive train.
Design: By creating a digital twin of the drives, machine
builders can shorten their time-to-market since they can
design, simulate and optimize their machine before
ordering any material or products. Together with other
tools from the engineering box, simulation can also speed
up the engineering phase of drives and entire machines,
for example by virtual commissioning of the PLC.
Realize: Once the machine is in operation, the drives can
be connected to other platforms, for example to the cloud
and Industrial Edge. This creates transparency in terms of
what is going on inside the drive train, e.g. with regard to
the actual current, torque and speed.
Optimize: To understand the collected data, our drive
train analytics portfolio provides algorithms and analysis
tools to unlock the potential of the data and turn the
gained transparency into insights and valuable
knowledge. These insights can then again be used in the
design phase of the next life cycle, thus closing the loop.
2 Siemens D 11 · 2023
© Siemens 2023
Benefits of drive train digitalization
Machine Availability Speed Business models
builders
Increase the availability Shorten Develop new service and
of your machines time-to-market business models
Machine Productivity Flexibility Efficiency
operators
Increase the productivity of Increase the flexibility of Identify potential for
your production your production optimization
Benefits for machine and plant builders Benefits for machine and plant operators
• Increased availability of machines and plants – thanks to • Increased availability and productivity of production, fewer
digital options for checking and implementing design unscheduled downtimes – through the early detection of
improvements and comprehensive monitoring of drive deviations and emerging risks thanks to digital drive
systems monitoring
• Shorter time-to-market and faster development times – • More flexible production down to batch size 1 – through
thanks to practical software tools and a continuous more effective use of knowledge from existing production
database for concurrent development processes as well as lines thanks to transparent utilization, states, locations, and
virtual simulations, tests, and commissioning of machines capacities down to the drive level
and plants • Identification of potential for optimization to make
• New options for future service and business models – production faster, better, and more efficient thanks to
ranging from customized application solutions and digital data-based transparency – for example, for faster
services to contractually guaranteed availabilities of modifications, simpler quality control, and the early
machines and plants prediction of maintenance demand as well as demand-
oriented maintenance
siemens.com/digital-drives
Siemens D 11 · 2023 3
© Siemens 2023
TIA Selection Tool –
quick, easy, smart configuration
For you to get the most out of our portfolio quickly and easily.
Do you always need the optimum configuration for
planning your project?
For your application we offer the TIA Selection Tool to
support all project planners, beginners and experts alike.
No detailed portfolio knowledge is necessary.
TIA Selection Tool is available for download as a free
desktop version or a cloud variant.
Your Advantages
Quick Easy Smart
• Configure a complete project with • Tool download either as desktop • Smart selection wizard for error-free
just a few entries – version or web-based cloud version configuration and ordering
without a manual, without special • Technically always up-to-date • Configuration options can be tested
knowledge about product portfolio and innova- and simulated in advance
• Import and export of hardware tive approaches • Library for archiving sample configu-
configuration to TIA Portal or other • Highly flexible, secure, cross-team rations
systems work in the cloud
• Ideal visualization of the projects to • Direct ordering in SiePortal
be configured
The TIA Selection Tool is a
completely paperless solution. For more
information,
Download it now: scan the
www.siemens.com/tst QR code
4 Siemens D 11 · 2023
1
© Siemens 2023
System overview
1/2 The SINAMICS converter family
1/2 Integration in automation
1/2 Applications
1/3 Innovative, energy-efficient and reliable
drive systems and applications as well as
services for the entire drive train
1/3 Energy efficiency
1/4 Variants
1/4 Platform concept
1/4 Quality management according to
EN ISO 9001
1/4 Integrated system configuration
1/5 Industry Online Support app
1/6 Drive selection
SINAMICS selection guide –
typical applications
1/6 Overview
1/6 More information
1/7 SIMOTICS motors
1/7 Overview
1/8 SINAMICS G130 / SINAMICS G150
The universal drive solution for single-motor
drives with a high power rating
1/8 Overview
1/8 Benefits
1/8 Application
1/8 Design
1/9 Integration
Siemens D 11 · 2023
© Siemens 2023
System overview
The SINAMICS converter family
1 ■ Overview
Integration in automation
Management level Office environment: SIMATIC IT / COMOS...
Process control level Control center / control system:
SIMATIC PCS 7 / WINCC
Control level Automation systems / HMI:
SIMATIC / SIMOTION / SINUMERIK
Fieldbus
SINAMICS V SINAMICS V
SINAMICS V SINAMICS G SINAMICS G
SINAMICS G SINAMICS S SINAMICS S SINAMICS S
G_D011_EN_00337d
pumping
ventilating
compressing moving processing machining
SINAMICS in automation
Totally Integrated Automation and communication Applications
SINAMICS is an integral component of the Siemens "Totally SINAMICS is the comprehensive converter family from Siemens
Integrated Automation" concept. Integrated SINAMICS systems designed for machine and plant engineering applications.
covering configuration, data storage, and communication at SINAMICS offers solutions for all drive tasks:
automation level ensure low-maintenance solutions with the • Simple pump and fan applications in the process industry
SIMATIC, SIMOTION and SINUMERIK control systems.
• Demanding single drives in centrifuges, presses, extruders,
Depending on the application, the appropriate variable elevators, as well as conveyor and transport systems
frequency converters can be selected and incorporated in the • Drive line-ups in textile, plastic film, and paper machines as
automation concept. With this in mind, the converters are clearly well as in rolling mill plants
subdivided into their different applications. A wide range of
communication options (depending on the converter type) are • Highly dynamic servo drives for machine tools, as well as
available for establishing a communication link to the automation packaging and printing machines
system:
• PROFINET
• PROFIBUS
• EtherNet/IP
• Modbus TCP
• Modbus RTU
• AS-Interface
• BACnet MS/TP
1/2 Siemens D 11 · 2023
© Siemens 2023
System overview
The SINAMICS converter family
■ Overview
1
SIMOTION SINUMERIK SIMATIC
SINAMICS
SIMOTICS
G_D011_XX_00515c
SINAMICS as part of the Siemens modular automation system
Innovative, energy-efficient and reliable drive systems and Up to 70 % potential for savings using variable-speed operation
applications as well as services for the entire drive train
SINAMICS enables great potential for savings to be realized by
The solutions for drive technology place great emphasis on the controlling the motor speed. In particular, huge potential savings
highest productivity, energy efficiency and reliability for all can be recovered from pumps, fans and compressors which are
torque ranges, performance and voltage classes. operated with mechanical throttle and valves. Here, changing to
variable-speed drives brings enormous economic advantages.
Siemens offers not only the right innovative variable frequency In contrast to mechanical control systems, the power
converter for every drive application, but also a wide range of consumption at partial load operation is always immediately
energy-efficient low-voltage motors, geared motors, explosion- adjusted to the demand at that time. So energy is no longer
protected motors and high-voltage motors for combination with wasted, permitting savings of up to 60 % – in exceptional cases
SINAMICS. even up to 70 %. Variable-speed drives also offer clear
Furthermore, Siemens supports its customers with global pre- advantages over mechanical control systems when it comes to
sales and after-sales services, with over 295 service points in maintenance and repair. Current spikes when starting up the
130 countries – and with special services e.g. application motor and strong torque surges become things of the past – and
consulting or motion control solutions. the same goes for pressure waves in pipelines, cavitation or
vibrations which cause sustainable damage to the plant. Smooth
Energy efficiency starting and ramp-down relieve the load on the mechanical
Energy management process system, ensuring a significantly longer service life of the entire
drive train.
Efficient energy management consultancy identifies the energy
flows, determines the potential for making savings and
implements them with focused activities.
Almost two thirds of the industrial power requirement is from
electric motors. This makes it all the more important to use drive
technology permitting energy consumption to be reduced
effectively even in the configuration phase, and consequently to
optimize plant availability and process stability. With SINAMICS,
Siemens offers powerful energy efficient solutions which,
depending on the application, enable a significant reduction in
electricity costs.
Siemens D 11 · 2023 1/3
© Siemens 2023
System overview
The SINAMICS converter family
1 ■ Overview
Regenerative feedback of braking energy Energy transparency in all configuration phases
In conventional drive systems, the energy produced during Early on, in the configuration phase, the SIZER for Siemens
braking is converted to heat using braking resistors. Energy Drives engineering tool provides information on the specific
produced during braking is efficiently recovered to the supply energy requirement. The energy consumption across the entire
system by versions of SINAMICS G and SINAMICS S converters drive train is visualized and compared with different plant
with regenerative feedback capability and these devices do concepts.
therefore not need a braking resistor. This permits up to 60 % of
the energy requirement to be saved, e.g. in lifting applications. SINAMICS in combination with energy-saving motors
Energy which can be reused at other locations on a machine. The consistency of the engineering extends beyond the
Furthermore, this reduced power loss simplifies the cooling of SINAMICS converter family to the higher-level automation
the system, enabling a more compact design. systems as well as to a wide range of energy-efficient motors in
a wide variety of performance classes, which are up to 10 %
more efficient than previous motors.
Variants
Depending on the area of application, the SINAMICS converter family offers an optimally tailored variant for any drive task.
Performance
SINAMICS V SINAMICS G SINAMICS S Price
SINAMICS V drives focus on SINAMICS G drives function perfectly for low SINAMICS S drives are predestined
the essentials both in terms of hardware and medium demands on the dynamic for demanding single - and multi-axis
and functionality. response of the control system. applications in machine and plant engineering
G_D011_EN_00449b
This results in a high degree of ruggedness as well as for numerous motion control tasks.
combined with lower investment costs.
Platform concept Integrated system configuration
All SINAMICS variants are based on a platform concept. Joint Siemens offers perfectly matched drive components with which
hardware and software components, as well as standardized you can meet your requirements. The drive components reveal
tools for dimensioning, configuration, and commissioning tasks their true strengths over the full range from engineering and
ensure high-level integration across all components. SINAMICS commissioning through to operation: Integrated system
handles a wide variety of drive tasks with no system gaps. The configuration is performed using the Siemens Product Configurator:
different SINAMICS variants can be easily combined with each Just select a motor and a converter and design them with the
other. SIZER for Siemens Drives (integrated in the TIA Selection Tool)
engineering tool. The STARTER and SINAMICS Startdrive
Quality management according to EN ISO 9001 commissioning tools integrate the motor data and at the same
SINAMICS conforms to the most exacting quality requirements. time simplify efficient commissioning. All drive components are
Comprehensive quality assurance measures in all development incorporated in the TIA Portal – this simplifies engineering,
and production processes ensure a consistently high level of commissioning and diagnostics.
quality.
Of course, our quality management system is certified by an
independent authority in accordance with EN ISO 9001.
1/4 Siemens D 11 · 2023
© Siemens 2023
System overview
The SINAMICS converter family
■ Overview
1
Industry Online Support app • Conveniently send inquiries to Technical Support. Detailed
information can be conveniently completed using the scan or
With the Industry Online Support app, you can access more than photo function
300000 documents for Siemens Industry products – any time
and from anywhere. • Save the favorites on the device using the offline cache
function. These articles, products and conferences can then
Main functions at a glance: be called even without network access.
• Scanning of product codes and EAN codes to directly display • Transfer of PDF documents to an external library
all of the technical and graphical data (e.g. CAx data) of the • The contents and interfaces are available in six languages
product (German, English, French, Italian, Spanish and Chinese) -
• Sending of product information or entries via e-mail to further including a temporary switchover to English.
process the information at the workstation
You can find additional information on the internet at:
www.siemens.com/sinamics-assistant
Direct
Low voltage
voltage
Standard performance Distributed Industry-specific Servo converters High performance DC
frequency converters frequency frequency converters frequency converters converters
converters
SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS SINAMICS
V20 G130 G115D G120X G180 V90 S110 S210 G220 S120 S150 DCM
G120C G150 G120D S200 S210 (New) S120M DCP 1)
G120 SIMATIC
ET 200pro FC-2
0.12 kW to 75 kW to 0.37 kW to 0.75 kW to 2.2 kW to 0.05 kW to 0.55 kW to 0.05 kW to 0.55 kW to 0.55 kW to 75 kW to 6 kW to
250 kW 2700 kW 7.5 kW 630 kW 6600 kW 7 kW 132 kW 7 kW 55 kW 5700 kW 1200 kW 30 MW
Pumps, Pumps, Conveyor Pumps, Pumps, Handling Single-axis Packaging Pumps, Production Test bays, Rolling mill
fans, fans, technology, fans, fans, machines, positioning machines, fans, machines cross cutters, drives,
compressors, compressors, single-axis compressors, compressors, packaging applications in handling compressors, (packaging, centrifuges wire-drawing
conveyor conveyor positioning building conveyor machines, machine and equipment, conveyor textile and machines,
belts, belts, applications management belts, automatic plant feed and belts, printing extruders and
mixers, mixers, (G120D) systems, extruders, assembly engineering withdrawal mixers, machines, kneaders,
mills, mills, process mixers, machines, devices, mills, paper cableways
spinning extruders industry, mills, metal forming stacking units, spinning machines, and lifts,
machines, HVAC, kneaders, machines, automatic machines, plastic test bay drives
textile water/waste centrifuges, printing assembly textile processing
machines, water separators machines, machines, machines, machines),
refrigerated industries winding and laboratory refrigerated machine
display unwinding automation, display tools,
counters, units wood, glass counters, plants,
fitness and ceramics fitness process lines
equipment, industry, equipment, and rolling
ventilation digital printing ventilation mills, marine
systems, machines systems, drives,
single-axis single-axis test bays
positioning positioning
applications in applications in
machine and machine and
plant plant
engineering engineering
Catalog Catalog Catalog Catalog Catalog Catalog Catalog Catalog Catalog Catalogs Catalog Catalog
D 31.1 D 11 D 31.2 D 31.5 D 18.1 D 33 D 31.1 D 32 D 36.1 D 21.3, D 21.4 D 21.3 D 23.1,
D 37.1 NC 62 SiePortal
Engineering tools (e.g. Siemens Product Configurator, TIA Selection Tool, SINAMICS DriveSim Basic/Advanced, STARTER and SINAMICS Startdrive)
G_D011_EN_00450u
1)
DC/DC controllers, see SiePortal.
Siemens D 11 · 2023 1/5
© Siemens 2023
System overview
Drive selection
1 ■ Overview
SINAMICS selection guide – typical applications
Use Requirements for torque accuracy/speed accuracy/position accuracy/coordination of axes/functionality
Continuous motion Non-continuous motion
Basic Medium High Basic Medium High
Pumping, Centrifugal pumps Centrifugal pumps Eccentric screw Hydraulic pumps Hydraulic pumps Descaling pumps
ventilating, Radial/axial fans Radial/axial fans pumps Metering pumps Metering pumps Hydraulic pumps
compressing Compressors Compressors
V20 G120X G220 G120/G220 S110 S120
G120C G130/G150 S120
G120X G180 1)
DCM
Moving Conveyor belts Conveyor belts Elevators Acceleration conveyors Acceleration conveyors Storage and retrieval
Roller conveyors Roller conveyors Container cranes Storage and retrieval Storage and retrieval machines
Chain conveyors Chain conveyors Mining hoists machines machines Robotics
Lifting/lowering devices Excavators for open- Cross-cutters Pick & place
Elevators cast mining Reel changers Rotary indexing tables
Escalators/moving Test bays Cross-cutters
walkways Roll feeds
Indoor cranes Engagers/disengag-
Marine drives ers
Cable railways
V20 G120/G220 G220 V90 S110 S120
G115D G120D S120 S200 S210 S210
G120C G130/G150 S150 G120/G220 DCM DCM
ET 200pro FC-2 2) G180 1) DCM G120D
Processing Mills Mills Extruders Tubular bagging Tubular bagging Servo presses
Mixers Mixers Winders/unwinders machines machines Rolling mill drives
Kneaders Kneaders Lead/follower drives Single-axis motion Single-axis motion Multi-axis motion control
Crushers Crushers Calenders control control such as
Agitators Agitators Main press drives such as such as • Multi-axis
Centrifuges Centrifuges Printing machines • Position profiles • Position profiles positioning
Extruders • Path profiles • Path profiles • Cyclic cams
Rotary furnaces • Interpolations
V20 G120/G220 G220 V90 S110 S120
G120C G130/G150 S120 S200 S210 S210
G180 1) S150 G120/G220 DCM
DCM
Machining Main drives for Main drives for Main drives for Axis drives for Axis drives for Axis drives for
• Turning • Drilling • Turning • Turning • Drilling • Turning
• Milling • Sawing • Milling • Milling • Sawing • Milling
• Drilling • Drilling • Drilling • Drilling
• Gear cutting • Lasering
• Grinding • Gear cutting
• Grinding
• Nibbling and
punching
S110 S110 S120 S110 S110 S120
S120 S120
Using the SINAMICS selection guide • The application type is selected from the vertical column
- Pumping, ventilating, compressing
The varying range of demands placed on modern variable - Moving
frequency converters requires a large number of different types. - Processing
Selecting the optimum converter is becoming a significantly - Machining
more complex process. The application matrix shown simplifies
this selection process considerably, by suggesting the ideal • The quality of the motion type is selected from the horizontal row
SINAMICS converter for examples of typical applications and - Basic
requirements. - Medium
- High
■ More information
More information about SINAMICS is available on the internet at
www.siemens.com/sinamics
Practical application examples and descriptions are available on the internet at
www.siemens.com/sinamics-applications
1)
Industry-specific converters. 2) Information on the SIMATIC ET 200pro FC-2 frequency converter is
available in Catalog D 31.2 and at www.siemens.com/et200pro-fc
1/6 Siemens D 11 · 2023
© Siemens 2023
System overview
SIMOTICS motors
■ Overview
1
SIMOTICS
Motors for motion control
SIMOTICS S servomotors SIMOTICS M main motors SIMOTICS L linear motors SIMOTICS T torque motors
Servomotors Servo geared motors
G_D011_EN_00491b
SIMOTICS stands for An outstanding performance for any job
• 150 years of experience in building electric motors A key characteristic of all SIMOTICS motors is their quality. They
• The most comprehensive range of motors worldwide are robust, reliable, dynamic and precise to assure the requisite
• Optimum solutions in all industries, regions and performance level for any process and deliver exactly the
power/performance classes capabilities demanded by the application in hand. Thanks to
their compact design, they can be integrated as space-saving
• Innovative motor technologies of the highest quality and units into installations. Furthermore, their impressive energy
reliability efficiency makes them effective as a means of reducing
• Highest dynamic performance, precision and efficiency operating costs and protecting the environment.
together with the optimum degree of compactness
A dense network of skill sets and servicing expertise around
• Our motors can be integrated into the drive train as part of the the world
overall system
SIMOTICS offers not only a wealth of sound experience gleaned
• A global network of skill sets and worldwide service around from a development history which stretches back over around
the clock 150 years, but also the know-how of hundreds of engineers. This
A clearly structured portfolio knowledge and our worldwide presence form the basis for a
unique proximity to industries which feeds through in tangible
The entire SIMOTICS product portfolio is transparently terms to the specific motor configuration which is tailored to suit
organized according to application-specific criteria in order to your application.
help users select the optimum motor for their application.
Our specialists are available to answer all your queries
The product range extends from standard motors for pumps, regarding any aspect of motor technology. At any time –
fans and compressors to highly dynamic, precise motion control wherever you are in the world. When you choose SIMOTICS,
motors for positioning tasks and motion control in handling therefore, you reap the benefits of a global service network
applications, as well as production machinery and machine which is continuously accessible, thereby helping to optimize
tools, to DC motors and powerful high-voltage motors. Whatever response times and minimize downtimes.
it is that you want to move – we can supply the right motor for the
task. Perfection of the complete drive train
www.siemens.com/simotics SIMOTICS is perfectly coordinated with other Siemens product
families. In combination with the SINAMICS integrated converter
family and the SIRIUS complete portfolio of industrial controls,
SIMOTICS fits seamlessly as part of the complete drive train into
automation solutions which are based on the SIMATIC,
SIMOTION and SINUMERIK control systems.
Siemens D 11 · 2023 1/7
© Siemens 2023
System overview
SINAMICS G130 / SINAMICS G150
SINAMICS G130 / SINAMICS G150
1 ■ Overview ■ Application
Variable-speed drives are ideal for all applications that involve
moving, conveying, pumping or compressing solids, liquids or
gases.
Key applications include:
• Pumps and fans
• Compressors
• Extruders and mixers
• Mills
■ Design
SINAMICS G130
The SINAMICS G130 provides machine builders and plant
constructors with a modular drive system that can be tailored to
specific applications.
SINAMICS G130 essentially consists of two modular, stand-
SINAMICS G130 converter built-in unit and SINAMICS G150 converter alone components
cabinet unit • Power Module and
SINAMICS G130 converter built-in units and SINAMICS G150 • Control Unit
converter cabinet units are designed for variable-speed drives
in mechanical engineering and plant construction. They may be located separately from one another or combined
in a single unit. The Power Module contains a slot for the Control
They have been specially designed to meet the requirements of Unit.
drives with square-wave and constant load characteristics, with
medium performance requirements, and without regenerative The AOP30 Advanced Operator Panel can be used for
feedback capability. commissioning and local operation.
The control accuracy of the sensorless vector control is suitable Predefined interfaces, via terminal block or the CU320-2 Control
for most applications, which means that an additional actual Unit with either PROFIBUS or PROFINET, make commissioning
speed value encoder is not required. and control of the drive much easier. The Control Unit interfaces
can be expanded with add-on modules.
However, SINAMICS G130/SINAMICS G150 converters are
optionally available with an encoder evaluation function in order SINAMICS G150
to handle applications that require an encoder for system- SINAMICS G150 is a ready-to-connect AC/AC converter in a
specific reasons. standard control cabinet.
SINAMICS G130 and SINAMICS G150 offer an economic drive It can be adapted to individual requirements by selecting from
solution that can be matched to customers' specific an extensive range of options.
requirements using the wide range of available components and
options. It is available in widths from 400 mm, which then increase in
intervals of 200 mm, and can be ordered with various degrees of
■ Benefits protection up to IP54 in two design versions.
• Version A
• Particularly quiet and compact converters due to the use of offers sufficient space for all the options available.
state-of-the-art IGBT power semiconductors and an The different versions allow the line and motor connections to
innovative cooling concept. be arranged at the top or bottom, as required. This results in
• All device modules are easily accessible, making them excellent flexibility in terms of location in the plant. This version
extremely service-friendly. is also available with power units connected in parallel.
• Can be easily integrated into automation solutions using a • Version C
PROFIBUS or PROFINET interface and various analog and is a particularly space-saving version designed for
digital interfaces. applications where the power supply components are
• Individual modules and power components can be replaced accommodated in a central low-voltage distribution unit and
quickly and easily, which ensures a higher level of plant need not be provided again in the control cabinet.
availability. The AOP30 Advanced Operator Panel is fitted as standard in the
• Simple commissioning and parameterization using interactive cabinet door for both versions.
menus on the AOP30 Advanced Operator Panel with graphic
LCD and plain-text display.
1/8 Siemens D 11 · 2023
© Siemens 2023
System overview
SINAMICS G130 / SINAMICS G150
SINAMICS G130 / SINAMICS G150
■ Integration
1
STARTER
Commissioning SIMATIC HMI SIMATIC S7
PROFIBUS
AOP30
SINAMICS
G150
SIMATIC ET 200
Digital/analog
I/O
SINAMICS
G130
RS232C
3ph. 3ph.
G_D011_EN_00162
SINAMICS G130 and SINAMICS G150 configuration example with SIMATIC S7
Siemens D 11 · 2023 1/9
© Siemens 2023
System overview
Notes
1
1/10 Показано початок документа. Повний текст — у PDF за посиланням вище.
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.