| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | JCI |
| Код документа | zfr1800-series-wireless-field-bus-system-catalog-page |
| Група обладнання | ZFR1800 Series Wireless Field Bus System |
| Сторінок | 5 |
| Мова документа | англійська |
| Розмір файлу | 0.1 МБ |
Текст документа
Code No. LIT-1900509
Issued December 5, 2014
ZFR1800 Series Wireless Field Bus System
Description
The ZFR1800 Series Wireless Field Bus System provides a wireless
platform for all Metasys® Field Equipment Controller (FEC) family
controllers using BACnet® protocol over 2.4 GHz wireless ISM band.
One ZFR1811 router is required per field controller. This pairing of a
router and any FEC Family device is referred to as a Wireless-Enabled
Field Controller (WEFC). An FEC Family device is an Advanced
Application Field Equipment Controller (FAC), FEC, Input/Output
Module (IOM), or VAV Modular Assembly 16 Series (VMA16) field
controller.
A ZFR1800 Series system consists of:
• up to eight ZFR1810 Wireless Field Bus Coordinators per field bus
• up to 35 Wireless-Enabled Field Controllers (WEFCs) per
coordinator
• up to 100 WEFCs per field bus, depending on the network engine ZFR1811 Routers (top left), ZFR1810 Coordinator (top center),
(32 with NCE, 50 with NAE35) and WRZ Series Sensors (bottom)
• up to nine WRZ Sensors per FEC or VMA16 field controller
• additional ZFR1811 Wireless Field Bus Routers connected to
MS-ZFRRPT-0 Repeater accessories, as required, acting as • buildings with marble, granite, glass, mirrored, wood veneer, or
repeaters other decorative surfaces that present challenges to hard-wiring
Note: Repeaters extend the wireless transmission distance of the • buildings with asbestos or other hazardous materials that must not
BACnet data communications, fill in any gaps within the wireless mesh be disturbed
network, and provide multiple wireless data transmission pathways. • buildings with occupants sensitive to disruptions to business
Together, these components create a wireless mesh network that • regions with high labor costs
allows the exchange of data between the collection of devices within The ZFR1800 Series System is approved by national compliance
the ZFR1800 Series system’s wireless network and wired BACnet agencies for use only in the United States and Canada. See Technical
Multidrop Serial Bus/Token-Passing (MS/TP) devices. Specifications.
The wireless mesh network enhances reliability by providing Locations or applications that prohibit cellular telephones or Wi-Fi
redundant transmission paths for the data through other routers in the systems are unsuitable for the wireless Metasys products:
mesh network. The result is a resilient, self-healing network. • operating rooms or radiation therapy rooms
Refer to the ZFR1800 Series Wireless Field Bus System Product • validated environments
Bulletin (LIT-12011336) for important product application information. • UL 864 applications
• Department of Defense applications requiring Diacap certification
Features (for example, military bases and military hospitals)
• wireless communications for a Metasys system Do not use the wireless Metasys products in applications that cannot
• wireless mesh network tolerate intermittent interference or where:
• improved application mobility and flexibility • critical control features would affect life safety or result in large
• support of up to nine WRZ Series Wireless Room Sensors per monetary loss, including secondary (backup) life-safety
Wirelessly Enabled Field Controller applications
• multiple diagnostic Light-Emitting Diodes (LEDs) • data centers, production lines, or critical areas would be shut down
• compact, easy-to-install, and versatile ZFR1811 routers • loss of critical control would result from loss of data from humidity or
temperature sensor communications
Applications • operation of exhaust fans or Air Handling Units (AHUs) would impair
The wireless Metasys products within a Metasys system are ideal for a purge or pressurization mode
any location where it is cost-prohibitive, difficult, or aesthetically • missing data would invalidate reporting required by the customer
unappealing to hardwire between Metasys products. Examples of • security points are monitored
these locations include the following:
• hospitals, office buildings, university campuses, educational Repair Information
facilities, correctional facilities, and other commercial structures If a ZFR1800 Series Wireless Field Bus System component fails to
with brick or solid concrete walls and/or ceilings that impede operate within its specifications, replace the unit. For a replacement
hard-wired applications ZFR1800 Series System component, contact the nearest
• office buildings, retail stores, and other commercial real estate Johnson Controls® representative.
where tenant turnover is frequent and temporary walls and ceilings
are common
• museums, historical buildings, atriums, and other sites where
building aesthetics and historical preservation are important
• stadiums, arenas, gymnasiums, convention centers, airports, zoos,
and other locations with large, open spaces
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc. www.johnsoncontrols.com
1
ZFR1800 Series Wireless Field Bus System (Continued)
Selection Charts
ZFR1800 Series Wireless Field Bus System Components
Code Number Description
MS-ZFR1810-x Wireless Field Bus Coordinator, 10 mW Transmission Power; functions with NAE35, NAE45, NAE55, and NCE25 Models
MS-ZFR1811-x Wireless Field Bus Router, 10 mW Transmission Power; functions with Metasys BACnet FECs, IOMs, VMA16s, and WRZ Series Sensors
WRZ-MHN0100-0 Wireless Remote Transmitter with Temperature, Relative Humidity (RH) and Occupancy Motion Detector (PIR) only, No Display
WRZ-MNN0100-0 Wireless Remote Transmitter with Occupancy Detection (PIR), No Display
WRZ-MTB0100-0 Wireless Remote Transmitter with Display, Temperature, Relative Humidity (RH), and Occupancy Detection only, Warmer/Cooler (+/-)
Setpoint Adjustment (setpoint configured in the Metasys system)
WRZ-MTN0100-0 Wireless Remote Transmitter with Temperature and Occupancy Detection only, No Display
WRZ-RMT10K-0 Wireless Remote Temperature Transmitter designed to operate with a TE-6300 Series 10k ohm Johnson Controls® Type II Thermistor
Sensor (order separately) to sense temperature in warmer applications up to 158°F (70°C). Includes one Transmitter, one Mounting Base,
strips of Double-Sided Adhesive Foam Tape (all factory assembled), and one Strain Relief
WRZ-STR0000-0 Wireless Transmitter and Temperature Sensor with Display and F/C Button. Includes Temperature Probe encased in a Clear Acrylic
Cylinder, 9 ft (2.7 m) Wire Lead, one Probe Mounting Strap, and a strip of Double-Sided Adhesive Foam Tape, 10 mW Transmission Power
WRZ-STRNIST-0 NIST Rated Wireless Transmitter and Temperature Sensor with Display and F/C Button. Includes Temperature Probe encased in a Clear
Acrylic Cylinder, 9 ft (2.7 m) Wire Lead, one Probe Mounting Strap, and a strip of Double-Sided Adhesive Foam Tape, 10 mW Transmission
Power
WRZ-THB0000-0 Wireless Temperature/Humidity Sensor with Display, Warmer/Cooler (+/-) Setpoint Adjustment or Setpoint Adjustment Scale: 13 to 29°C/55
to 85°F, F/C Button, Relative Humidity (RH) Button and Occupancy Button, 10 mW Transmission Power
WRZ-THN0000-0 Wireless Temperature/Humidity Sensor, Occupancy Button, No Temperature adjustment and No LCD temperature/humidity display,
10 mW Transmission Power
WRZ-THP0000-0 Wireless Temperature/Humidity Sensor, Warmer/Cooler (+/-) Setpoint Adjustment and Occupancy Button, No LCD temperature/humidity
display, 10 mW Transmission Power
WRZ-TTB0000-0 Wireless Temperature Sensor with Display and F/C Button, 10 mW Transmission Power
WRZ-TTD0000-0 Wireless Temperature Sensor with Display, F/C Button and Fan Speed Control, 10 mW Transmission Power
WRZ-TTP0000-0 Wireless Room Temperature Sensor, Warmer/Cooler (+/-) Setpoint Adjustment, 10 mW Transmission Power
WRZ-TTR0000-0 Wireless Room Temperature Sensor, No Setpoint Adjustment, 10 mW Transmission Power
WRZ-TTS0000-0 Wireless Room Temperature Sensor, Setpoint Adjustment Scale: 13 to 29°C/55 to 85°F, 10 mW Transmission Power
WRZ Sensor Model Comparison
Sensor Model Temperature 3% Display F/C Button Fan Control Occupancy Occupancy Setpoint Adjustment
Humidity Motion Detection Override Dial1
(PIR)
WRZ-MHN0100-0
WRZ-MNN0100-0
WRZ-MTB0100-0
WRZ-MTN0100-0 ABSOL
WRZ-RMT10K-0
WRZ-STR0000-0
WRZ-STRNIST-0
WRZ-THB0000-0 Both
WRZ-THN0000-0
WRZ-THP0000-0 W/C
WRZ-TTB0000-0 Both
WRZ-TTD0000-0 Both
WRZ-TTP0000-0 W/C
WRZ-TTR0000-0
WRZ-TTS0000-0 ABSOL
1. Either Absolute Scale (ABSOL), Warmer/Cooler (W/C), or Both (BOTH).
Related Field Controllers (Part 1 of 2)
Code Number Description1
MS-FAC2611-0 17-Point Field Equipment Controller with 6 UI, 2 BI, 3 BO, 2 AO, 4 CO, 24 VAC, and SA Bus with Real-Time Clock
MS-FAC2612-1 18-Point Advanced Application Field Equipment Controller with 5 UI, 4 BI, 4 CO, and 5 RO
MS-FAC2612-2 18-Point Advanced Application Field Equipment Controller with 5 UI, 4 BI, 4 CO, and 5 RO. Line voltage input power 90 VAC to 230 VAC.
MS-FAC3611-0 26-Point Advanced Application Field Equipment Controller with 8 UI, 6 BI, 6 BO, and 6 AO; 24 VAC; SA Bus; FC Bus; Integral Real-time
Clock; Improved Fast Persistence
MS-FEC1611-0 10-Point Field Equipment Controller with 2 UI, 1 BI, 3 BO, 4 CO, 24 VAC, and SA Bus
MS-FEC1621-0 Field Equipment Controller Cover with 2 UI, 1 BI, 3 BO, 4 CO, 24 VAC, and SA Bus with LCD Screen, with Mounting Base
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc. www.johnsoncontrols.com
2
ZFR1800 Series Wireless Field Bus System (Continued)
Related Field Controllers (Part 2 of 2)
Code Number Description1
MS-FEC2611-0 17-Point Field Equipment Controller with 6 UI, 2 BI, 3 BO, 2 AO, 4 CO, 24 VAC, and SA Bus
MS-FEC2621-0 17-Point Field Equipment Controller with 6 UI, 2 BI, 3 BO, 2 AO, 4 CO, 24 VAC, and SA Bus with LCD Screen
MS-IOM1711-0 4-Point IOM with 4 BI, FC Bus, and SA Bus Support
MS-IOM2711-0 6-Point IOM with 2 UI, 2 UO, 2 BO, FC Bus, and SA Bus Support
MS-IOM2721-0 10-Point Analog IOM with 8 UI, 2 AO, FC Bus, and SA Bus Support
MS-IOM3711-0 12-Point IOM with 4 UI, 4 UO, 4 BO, FC Bus, and SA Bus Support
MS-IOM3721-0 16-Point Binary IOM with 16 BI, FC Bus, and SA Bus Support
MS-IOM3731-0 16-Point Binary IOM with 8 BI, 8 BO, FC Bus, and SA Bus Support
MS-IOM4711-0 17-Point IOM with 6 UI, 2 BI, 3 BO, 2 AO, 4 CO, 24 VAC, and SA Bus with Mounting Base
MS-VMA1610-0 Integrated VAV Controller/Actuator/Pressure Sensor (Cooling Only), FC Bus, and SA Bus
MS-VMA1620-0 Integrated VAV Controller/Actuator/Pressure Sensor (with Reheat and Fan Control), FC Bus, and SA Bus
1. Universal Input (UI), Binary Input (BI), Binary Output (BO), Analog Output (AO), Configurable Output (CO), Sensor Actuator (SA), and Relay Output (RO).
Accessories
Code Number Description
MS-ZFRRPT-0 Optional Repeater Accessory for use with ZFR1811 Router as a repeater. Includes 20 to 28 VAC or 16 to 30 VDC input power, 12 VDC
output power supply (regulated at 500 mA maximum, 6 VA), and 4 x 4 in. (10.16 cm x 10.16 cm) electrical box with cover. Kit does not
include a ZFR1811 Router.
MS-ZFRCBL-0 Wire Harness with Connectors for use with MS-ZFR1811-x Router for Wireless Field Bus. Allows ZFR1811 Router to function with
FEC1620 controller; and with FEC1610, VMA1610, or VMA1620 controllers in conjunction with NS Series Sensors, MS-BTCVT-1 Wireless
Commissioning Converter, or DIS1710 Local Controller Display.
ZFR-USBHA-0 Universal Serial Bus (USB) Dongle with ZFR Driver provides a wireless connection through the Controller Configuration Tool (CCT) to
allow wireless commissioning of the wirelessly enabled FEC, IOM, and VMA16 Series Field Controllers. Also used for the ZFR Checkout
Tool (ZCT) in CCT.
ZFR-1810ANT-700 Replacement antenna kit for ZFR1810 Wireless Field Bus Coordinator. Includes antenna, coaxial cable, and mounting hardware.
WRZ-SST-120 Optional Wireless Sensing System Tool to be used with a WRZ Series Sensor to indicate wireless signal strength between potential
locations of ZFR1800 System devices.
MS-BTCVT-1 Wireless Commissioning Converter, with Bluetooth® technology
MS-DIS1710-0 Local Controller Display for FEC1610 and FEC2610 models
TP-2420 Transformer, Wall Plug Mount, 120 VAC to 24 VAC, 20 VA, Class 2
Y65T31-0 1 Transformer, 120/208/240 VAC to 24 VAC, 40 VA, Class 2, Foot Mount, 20 cm (8 in.) Primary Leads and Secondary Screw Terminals
MAGNET-BASE-PLW Magnetic Backplate for Mounting a Transmitter on Metal Surfaces; 5 Magnetic Backplates per Package
T-4000-119 1.6 mm (1/16 in.) Allen-Head Adjustment Tool (30 per Bag) for Accessing and Securing WRZ Series Sensors
1.5 VDC, AA Alkaline Replacement Battery for WRZ Series Sensors (Purchase Locally.)
Battery
1. Additional Y60 Series Transformers are available from Johnson Controls.
Technical Specifications
ZFR1810 Wireless Field Bus Coordinator (Part 1 of 2)
Product Code Number MS-ZFR1810-x
Power Supply Input One of the following:
24 VAC +10%/-15%, 50/60 Hz, Class 2. Transformer allowance should be 2.5 VA maximum, 2 VA typical. Provided
through the three-position 24 V~ screw terminal pluggable block.
15 VDC, 180 mA (7 to 18 VDC, 185 mA maximum current draw) on the FC Bus provided through the FC BUS IN RJ-
12 jack from the FC Bus jack on a field controller or NxE Supervisory Engine.
Power Supply Output 15 VDC; Provided through the FC/SA BUS OUT RJ-12 jack for external devices.
Note: You can only use the power supply output when the ZFR1810 device is powered from the 24 VAC power
supply input.
Addressing DIP Switches, Field Adjustable
Wireless Band Direct-Sequence Spread-Spectrum, 2.4 GHz ISM Bands
Transmission Power 10 mW Maximum
Transmission Range 76.2 m (250 ft) Maximum Line-of-Sight
15 m (50 ft) Recommended
Ambient Conditions Operating: 0 to 50°C (32 to 122°F), 5 to 95% RH, Noncondensing
Storage: -20 to 70°C (-4 to 158°F), 5 to 90% RH, Noncondensing
Materials White Plastic Housing with Plenum rating per UL1995 UL94-5VB Flammability Rating
Terminations Two spade terminals with three-position screw terminal pluggable block for 24 VAC power supply input.
Four spade terminals with four-position screw terminal pluggable block for RS-485 communications.
RJ-12 IN jack for 15 VDC power supply and communications connection from an NxE or FEC FC Bus jack.
RJ-12 OUT jack supplies 15 VDC and communications to BTCVT Wireless Commissioning Converter.
Dimensions 146 x 122 x 52 mm (5.8 x 4.8 x 2.1 in.)
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc. www.johnsoncontrols.com
3
ZFR1800 Series Wireless Field Bus System (Continued)
ZFR1810 Wireless Field Bus Coordinator (Part 2 of 2)
Mounting Hardware Four No. 6 Trade Size Sheet Metal Screws
Shipping Weights 0.45 kg (1.0 lb)
Compliance United States:
Intended for Connection to an NEC Class 2 Power Source;
UL 916 Energy Management
Plenum rated per UL1995 UL94-5VB Flammability Rating
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Transmission Complies with FCC Part 15.247 Regulations for Low Power Unlicensed Transmitters
Transmitter Identification ZFR1810-0: FCC: TFB-MATRIXL
Transmitter Identification ZFR1810-1: FCC: OEJ-WRZRADIO
Canada:
CAN/CSA C22.2 No. 205, Signal Equipment
Industry Canada (IC) Compliant to Canadian ICES-003, Class B Limits
Industry Canada (IC) RSS-210
Transmitter Identification ZFR1810-0: 5969A-MATRIXLP
Transmitter Identification ZFR1810-1: 279A-WRZRADIO
Europe:
CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential requirements and
other relevant provisions of the R&TTE Directive 1999/05/EC and the EMC Directive 2004/108/EC.
Australia and New Zealand: C-Tick Mark, Australia/NZ Emissions Compliant
ZFR1811 Wireless Field Bus Router
Product Code Number MS-ZFR1811-x
Supply Voltage 8 to 18 VDC, 15 VDC nominal, Provided from the FC/SA BUS RJ-12 jack on the FEC, IOM, or VMA1600
Current Consumption 90 mA maximum
Addressing DIP Switches, Field Adjustable
Wireless Band Direct-Sequence Spread-Spectrum, 2.4 GHz ISM Bands
Transmission Power 10 mW Maximum
Transmission Range 76.2 m (250 ft) Maximum Line-of-Sight
15 m (50 ft) Recommended
Ambient Conditions Operating: 0 to 50°C (32 to 122°F), 5 to 95% RH, Noncondensing
Storage: -20 to 70°C (-4 to 158°F), 5 to 90% RH, Noncondensing
Materials Translucent Plastic Housing with Plenum rating per UL1995 UL94-5VB Flammability Rating
Terminations RJ-12 plug for connection to FEC or VMA1600 FC/SA Bus jack
Dimensions 136 x 100 x 18 mm (5-3/8 x 3-15/16 x 3/4 in.)
Mounting Hardware 1/2 in. trade size Electrical Mechanical Tubing (EMT) connector
Shipping Weights 0.095 kg (0.21 lb)
Compliance United States:
Intended for Connection to an NEC Class 2 Power Source;
UL 916 Energy Management
Plenum rated per UL1995 UL94-5VB Flammability Rating
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Transmission Complies with FCC Part 15.247 Regulations for Low Power Unlicensed Transmitters
Transmitter Identification ZFR1811-0: FCC: TFB-MATRIXL;
Transmitter Identification ZFR1811-1: FCC: OEJ-WRZRADIO;
Canada:
CAN/CSA C22.2 No. 205, Signal Equipment
Industry Canada (IC) Compliant to Canadian ICES-003, Class B Limits
Industry Canada (IC) RSS-210
Transmitter Identification ZFR1810-0: 5969A-MATRIXLP
Transmitter Identification ZFR1810-1: 279A-WRZRADIO
Europe:
CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential requirements and
other relevant provisions of the R&TTE Directive 1999/05/EC and the EMC Directive 2004/108/EC.
Australia and New Zealand: C-Tick Mark, Australia/NZ Emissions Compliant
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc. www.johnsoncontrols.com
4
ZFR1800 Series Wireless Field Bus System (Continued)
WRZ Series Sensors
Product Codes WRZ-MHN0100-0: Temperature/Humidity Sensor with Occupancy Motion Detection (PIR)
WRZ-MNN0100-0: Occupancy Sensor with Occupancy Motion Detection (PIR)
WRZ-MTB0100-0: Temperature/Humidity Sensor with Display and Occupancy Motion Detection (PIR) with Warmer/
Cooler (+/-) Setpoint Adjustment (setpoint configured in the Metasys system)
WRZ-MTN0100-0: Temperature Sensor with Occupancy Motion Detection (PIR) with No Display
WRZ-RMT10K-0: Temperature Transmitter designed to operate with a TE-6300 Series 10k ohm Johnson Controls®
Type II Thermistor Sensor (order separately) to sense temperature in warmer applications up to 158°F (70°C)
WRZ-STR0000-0: Transmitter and Temperature Sensor with Display and F/C Button
WRZ-STRNIST-0: NIST Rated Transmitter and Temperature Sensor with Display and F/C Button
WRZ-THB0000-0: Temperature/Humidity Sensor with Display, Warmer/Cooler (+/-) Setpoint Adjustment or Setpoint
Adjustment Scale: 13 to 29°C/55 to 85°F, F/C Button, RH Button and Occupancy Button
WRZ-THN0000-0: Temperature/Humidity Sensor with Occupancy Button
WRZ-THP0000-0: Temperature/Humidity Sensor with Warmer/Cooler (+/-) Setpoint Adjustment and Occupancy
Button
WRZ-TTB0000-0: Temperature Sensor with Display and F/C Button
WRZ-TTD0000-0: Temperature Sensor with Display, F/C Button and Fan Speed Control
WRZ-TTP0000-0: Temperature Sensor with Warmer/Cooler (+/-) Setpoint Adjustment
WRZ-TTR0000-0: Temperature Sensor with No Setpoint Adjustment
WRZ-TTS0000-0: Temperature Sensor with Setpoint Adjustment Scale: 13 to 29°C (55 to 85°F)
Power Requirements 3 VDC Supplied by Two 1.5 VDC AA Alkaline Batteries (Included with Sensor);
Typical Battery Life: 48 Months (36 Months Minimum)
Addressing DIP Switches, Field Adjustable.
MS/TP Address, PAN Number, and Zone Address
Ambient Conditions Operating: 0 to 50C (32 to 122F), 5 to 95% RH, Noncondensing
Storage: -40 to 71C (-40 to 160F), 5 to 95% RH, Noncondensing
Wireless Band Direct-Sequence Spread-Spectrum, 2.4 GHz ISM Band
Transmission Power 10 mW Maximum
Transmission Range 30 m (100 ft) Maximum Line-of-Sight;
15 m (50 ft) Recommended
Transmissions Every 60 Seconds (±20 Seconds)
Temperature System Accuracy 0.6C/1.0F Over the Range of 13 to 29C (55 to 85F);
0.9C/1.5F Over a Range of 0 to 13C (32 to 55F) and 29 to 43C (85 to 110F)
Temperature Sensor Type Internal 10k ohm Negative Temperature Coefficient (NTC) Thermistor
Humidity Calibrated Range 10% to 90% RH at 23C (73F)
Humidity Accuracy ±3% RH across the Range of 20% to 80% RH, ±6% RH across the Range of 10% to 20% RH and 80% to 90% RH;
within the Temperature Range of 13 to 29°C (55 to 85°F)
Materials NEMA 1 White Plastic Housing
Mounting Screw Mount or Double-Sided Adhesive Foam Tape Mount; Double-Sided Adhesive Foam Tape Included
Dimensions 120 x 80 x 38 mm (4.7 x 3.1 x 1.5 in.)
Shipping Weight 0.14 kg (0.3 lb)
Compliance United States:
Transmission Complies with FCC Part 15.247 Regulations for Low Power Unlicensed Transmitters
Transmitter FCC Identification: TFB-MATRIXL
Canada:
Industry Canada IC: 5969A-MATRIXL
Europe:
CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential requirements and
other relevant provisions of the R&TTE Directive 1999/05/EC and the EMC Directive 2004/108/EC.
Australia and New Zealand: C-Tick Mark, Australia/NZ Emissions Compliant
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2014 Johnson Controls, Inc. www.johnsoncontrols.com
5Позиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.