| Вид документа | Технічний документ |
|---|---|
| Виробник | JCI |
| Код документа | VSC-Series-III |
| Сторінок | 168 |
| Мова документа | англійська |
| Розмір файлу | 1.9 МБ |
Текст документа
VSC Series III variable speed drives
Installation manual
Effective October 2016
New information
VSC Variable Speed Drives
Support services
The goal of Johnson Controls is to ensure your greatest possible satisfaction with the
operation of our products. We are dedicated to providing fast, friendly, and accurate
assistance. Whether it’s by phone, fax, or email, you can access support information
listed below.
You should contact your local Johnson Controls Sales Representative for product pricing,
availability, ordering, expediting, and repairs.
Website
Use the Johnson Controls website to find product information.
Website address
www.johnsoncontrols.com –> HVAC Controls –> Variable Speed Drives
Johnson Controls product sales operation
Call the Johnson Controls PSO Team if you need assistance with placing an order, stock
availability or proof of shipment, expediting an existing order, emergency shipments,
product price information, and returns (including warranty returns).
Voice: 1-800-ASK-JNSN [275-5676] (US); 1-800-321-4023 (CA)
FAX: 1-800-356-1191 (US); 1-800-321-4024 (CA)
Support Hours of Operation: Monday–Friday, 6:30 a.m.–5:30 p.m. CST
(No evening or weekend Customer Service hours).
If you are in the U.S. or Canada, you can take advantage of our toll-free line for technical
assistance. Technical support engineers are available for calls during regular business hours.
Johnson Controls Field Support Center1-888-281-3792 Monday–Friday, 7:30 a.m.–5:30 p.m.
CSTemail: CGFieldSupportCenter@jci.com
For emergency assistance, contact:
johnsoncontrols technical resource center
Voice: 877-ETN-CARE (386-2273) (8:00 a.m.–5:00 p.m. EST)
FAX: 828-651-0549
email: TRC@johnsoncontrols.com
VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com i
VSC Variable Speed Drives
Table of contents
SAFETY
Before commencing the installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv
Definitions and symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Hazardous high voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Warnings and cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
ABOUT THIS MANUAL
Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
List of revisions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Mains supply voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Units of measurement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
VSC DEVICE SERIES
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
System overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Checking the delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Rated operational data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Voltage categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selection criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Output reduction (derating) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Maintenance and inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Charging the internal DC link capacitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ENGINEERING
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Electrical power network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cable cross-sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Safety and switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Mains chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Radio interference suppression filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Braking resistances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Motor chokes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Sine filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Switching to the output side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Three-phase motors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
INSTALLATION
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Mounting position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
IP66 / NEMA4X degree of protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
EMC installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Block diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Insulation testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Protection against electric shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
ii VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com
VSC Variable Speed Drives
Table of contents, continued
OPERATIONAL
Checklist for commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Operational hazard warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Commissioning with control signal terminals (default settings) . . . . . . . . . . . . . 84
Commissioning with local controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Handling the keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Help leaflets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
CONTROL SIGNAL TERMINALS
Correspondence between inputs/outputs and terminals . . . . . . . . . . . . . . . . . . 94
Configuration of the control signal terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
MESSAGES
List of messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
ERROR MESSAGES
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Fault history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Fault list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Fault diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
TECHNICAL DATA
General rating data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Specific rated operational data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Cable cross-sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
ACCESSORIES
Device-specific accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
General accessories (list) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
PARAMETERS
“Monitor” parameter group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
“Extended” parameter group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
“Advanced” parameter group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com iii
VSC Variable Speed Drives
Safety
Warning!
Dangerous electrical voltage!
Before commencing the installation ● Measures should be taken to ensure the proper restart of
programs interrupted after a voltage dip or failure. This
● Disconnect the power supply of the device.
should not cause dangerous operating states even for a
● Ensure that devices cannot be accidentally retriggered. short time. If necessary, emergency switching off devices
should be implemented.
● Verify isolation from the supply.
● Wherever faults in the automation system may cause
● Ground and short-circuit. damage to persons or property, external measures must
● Cover or enclose neighbouring units that are live. be implemented to ensure a safe operating state in the
event of a fault or malfunction (for example, by means of
● Follow the engineering instructions (IL) of the device separate limit switches, mechanical interlocks, etc.).
concerned.
● During operation, and depending on their degree of
● Only suitably qualified personnel in accordance with protection, variable speed drives may have live,
EN 50110-1/-2 (VDE 0105 Part 100) may work on this uninsulated, moving, and/or rotating parts, as well as hot
device/system. surfaces.
● Before installation and before touching the device ensure ● The impermissible removal of the required cover, improper
that you are free of electrostatic charge. installation or incorrect operation of the motor or variable
speed drive can cause the failure of the device and serious
● The functional earth (FE) must be connected to the
injury and/or material damage.
protective earth (PE) or to the potential equalizing.
The system installer is responsible for implementing this ● Comply with all applicable national accident prevention
connection. regulations (i.e., BGV A3) when working with energized
variable speed drives.
● Connecting cables and signal lines should be installed so
that inductive or capacitive interference do not impair the ● The electrical installation must be carried out in
automation functions. accordance with the relevant regulations (i.e., with regard
to cable cross sections, fuses, PE).
● Install automation devices and related operating elements
in such a way that they are well protected against ● All transport, installation, commissioning and maintenance
unintentional operation. work must only be carried out by trained personnel
(observe IEC 60364, HD 384 or DIN VDE 0100 and national
● Suitable safety hardware and software measures should
accident prevention regulations).
be implemented for the I/O connection so that a cable or
wire breakage on the signal side does not result in ● If applicable, systems in which variable speed drives are
undefined states in the automation device. installed must be equipped with additional monitoring and
protective devices in accordance with the applicable safety
● Ensure a reliable electrical isolation of the low voltage
regulations, i.e., the German Equipment and Product
for the 24 V supply. Only use power supply units
Safety Act, accident prevention regulations, etc. Making
complying with IEC 60364-4-41 or HD 384.4.41 S2
changes to the variable speed drives by using the
(VDE 0100 part 410).
operating software is allowed.
● Deviations of the mains voltage from the nominal value ● Keep all covers and doors closed during operation.
must not exceed the tolerance limits given in the technical
data, otherwise this may cause malfunction and ● When designing the machine, the user must incorporate
dangerous operation. mechanisms and measures that limit the consequences of
a drive controller malfunction or failure (an increase in
● Emergency-Stop devices complying with IEC/EN 60204-1
motor speed or the motor’s sudden stop) so as to prevent
must be effective in all operating modes of the automation
hazards to people and property, i.e.:
devices. Unlatching the emergency switching off devices
must not cause restart. ● Additional stand-alone devices for monitoring
parameters that are relevant to safety (speed, travel,
● Built-in devices for enclosures or cabinets must only be
end positions, etc.)
run and operated in an installed state, desk-top devices or
portable devices only when the housing is closed. ● Electrical and non-electrical safety devices (interlocks or
mechanical locks) for mechanisms that protect the
entire system
iv VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com
VSC Variable Speed Drives
● Due to the possibility of there being capacitors that are Hazardous high voltage
still holding a charge, do not touch live device parts or
terminals immediately after disconnecting the variable WARNING
speed drives from the supply voltage. Heed the
corresponding labels on the variable speed drives Motor control equipment and electronic controllers are
connected to hazardous line voltages. When servicing
Read this manual thoroughly and make sure you understand drives and electronic controllers, there may be exposed
the procedures before you attempt to install, set up, operate components with housings or protrusions at or above
or carry out any maintenance work on this VSC Adjustable line potential. Extreme care should be taken to protect
Speed Drive. against shock.
Definitions and symbols ● Stand on an insulating pad and make it a habit to use
only one hand when checking components.
WARNING ● Always work with another person in case an
emergency occurs.
This symbol indicates high voltage. It calls your attention
to items or operations that could be dangerous to you ● Disconnect power before checking controllers or
and other persons operating this equipment. Read the performing maintenance.
message and follow the instructions carefully.
● Be sure equipment is properly earthed.
● Wear safety glasses whenever working on electronic
controllers or rotating machinery.
This symbol is the “Safety Alert Symbol.” It occurs with
either of two signal words: CAUTION or WARNING, as
described below.
WARNING
The components in the drive’s power section remain
WARNING energized after the supply voltage has been switched off.
After disconnecting the supply, wait at least five minutes
Indicates a potentially hazardous situation which, if not before removing the cover to allow the intermediate
avoided, can result in serious injury or death. circuit capacitors to discharge.
Pay attention to hazard warnings!
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, can result in minor to moderate injury, or serious
damage to the product. The situation described in the DANGER
CAUTION may, if not avoided, lead to serious results. 5 MIN
Important safety measures are described in CAUTION (as
well as WARNING).
WARNING
Electric shock hazard—risk of injuries! Carry out wiring
work only if the unit is de-energized.
WARNING
Do not perform any modifications on the AC drive when
it is connected to mains.
Warnings and cautions
This manual contains clearly marked cautions and warnings
which are intended for your personal safety and to avoid any
unintentional damage to the product or connected
appliances.
Please read the information included in cautions and
warnings carefully.
VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com v
VSC Variable Speed Drives
vi VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com
About this manual
About this manual
This manual (LIT-12012386) is used in the installation and
programming of the Series III VSC variable speed drives.
Target group
This LIT-12012386 manual is intended for engineers and
electricians. Electrical engineering and physics-related
knowledge and skills will be required in order to be able
to commission the corresponding devices.
We assume that you have a good knowledge of engineering
basics and that you are familiar with handling electrical
systems and machines, as well as with reading technical
drawings.
List of revisions
The following significant amendments have been introduced
since previous issues:
Publication date Page Keyword New Modified Deleted
10/16 Initial issue
Writing conventions Tips
Symbols with the following meaning are used in this manual: Note: Indicates useful tips.
● Indicates instructions to be followed. In order to make it easier to understand some of the figures
included in this manual, the variable speed drive housing, as
Hazard warnings of material damages well as other safety-relevant parts, has been left out.
However, it is important to note that the variable speed drive
must always be operated with its housing in its proper place,
Notice as well as with all required safety-relevant parts.
Warns about the possibility of material damage. All the specifications in this manual refer to the hardware and
software versions documented in it.
Hazard warnings of personal injury
Documents with additional information
CAUTION Note: More information on the devices described here can
Warns of the possibility of hazardous situations that may be found on the Internet under:
possibly cause slight injury.
www.johnsoncontrols.com
WARNING
Warns of the possibility of hazardous situations that
could result in serious injury or even death.
DANGER
Warns of hazardous situations that result in serious
injury or death.
VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com 1
About this manual
Abbreviations Mains supply voltages
The following abbreviations are used in this manual: The rated operating voltages stated in the following table are
based on the standard values for networks with a grounded
Abbreviation Description star point.
dec Decimal (base-10 numeral system) In ring networks (as found in Europe) the rated operating
DS Default settings voltage at the transfer point of the power supply companies
EMC Electromagnetic compatibility is the same as the value in the consumer networks (i.e.,
230 V, 400 V).
FE Functional earth
In star networks (as found in North America), the rated
FS Frame Size operating voltage at the transfer point of the utility
FWD Forward run (clockwise rotating field) companies is higher than in the consumer network.
GND Ground (0-V-potential) Example: 120 V R 115 V, 240 V R 230 V, 480 V R 460 V.
hex Hexadecimal (base-16 numeral system) The VSC variable speed drive’s wide tolerance range takes
into account a permissible voltage drop of 10% (i.e.
ID Identifier (unique ID) ULN –10%) while, in the 400-V category, it takes into
IGBT Insulated gate bipolar transistor account the North American mains voltage of 480 V +10 %
LED Light Emitting Diode (LED) (60 Hz).
OLED Organic Light Emitting Diode The rated mains voltage operational data is always based on
mains frequencies of 50/60 Hz within a range of 48 to 62 Hz.
PC Personal Computer
PDS Power Drive System The permissible power supply for the VSC series can be
found in “Features” on Page 9.
PE Protective earth
PES EMC connection to PE for screened lines
PNU Parameter number
REV Reverse run (counterclockwise rotation field active)
ro Read Only (read access only)
rw Read/Write (read/write access)
SCCR Short Circuit Current Rating
UL Underwriters Laboratories
Units of measurement
Every physical dimension included in this manual uses
international metric system units, otherwise known as SI
(Système International d’Unités) units. For the purpose of the
equipment’s UL certification, some of these dimensions are
accompanied by their equivalents in imperial units.
Table 1. Unit conversion examples
US-American US-American
Designation designation value SI value Conversion value
Length inch 1 in (") 25.4 mm 0.0394
Performance horsepower 1 hp = 1.014 PS 0.7457 kW 1.341
Torque pound-force inches 1 lbf in 0.113 Nm 8.851
Temperature Fahrenheit 1 °F (TF) –17.222 °C (TC) TF = TC × 9/5 + 32
Rotational speed Revolutions per minute 1 rpm 1 min-1 1
Weight pound 1 lb 0.4536 kg 2.205
Flow rate cubic feed per minute 1 cfm 1.698 m3/min 0.5889
2 VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com
VSC device series
VSC device series
Introduction For distributed local installations, there are three sizes
covering a performance range of 0.37 (for 230 V) to 7.5 kW
Due to their ease of use and high reliability, VSC Series III (for 400 V) and featuring a degree of protection of IP66.
variable speed drives are ideal for general applications These models come in two versions: with and without local
involving three-phase motors. In addition, an integrated radio controls. These local controls include a setpoint
interference suppression filter and a flexible interface ensure potentiometer, a selector switch for switching operating
that the inverters meet a number of important needs in the directions, and a lockable main switch on the mains side.
machine building industry when it comes to the optimization
of production and manufacturing processes. The computer-based drivesConnect parameter configuration
program ensures data integrity and reduces the time
For installations in control panels, devices with a required for commissioning and maintenance.
performance range of 0.37 (for 230 V) to 22 kW (for 400 V)
are available in a compact and sturdy design featuring three In addition, the comprehensive accessories available
available sizes (FS1, FS2, FS3, FS4) and a degree of increase the inverters’ flexibility in all scopes of application.
protection of IP20.
REV 0
FWD
PWR OFF
ON
DC- L1/L
L2/N L3
1 2 3 4 5 6 7 8 9 10 11
DC+ BR
U V W
IP20 degree IP66 degree of protection IP66 degree of protection,
of protection with local controls
Figure 1. Designs and enclosure versions
VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com 3
VSC device series
System overview
1 2 3 4 5 6 7 8 9 10 11
ffj U V W
Ready
I A
O
Figure 2. System overview (example: size FS1, degree of protection IP20)
1 VSC… variable speed drives
2 Extern radio interference suppression filter DX-EMC…
3 DX-LN… mains choke, DX-LM3-… motor choke, DX-SIN3-… sine filter
4 DX-BR… braking resistance
5 DXC-EXT-… expansion module
6 DX-NET-ETHERNET2-2 EtherNet/IP interface
7 DX-COM-STICK2 communication module and accessories
(i.e., DX-CBL-… connection cable)
8 DE-KEY-… keypad (external)
4 VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com
VSC device series
Checking the delivery Open the packaging with adequate tools and inspect the
contents immediately after receipt in order to ensure that
Note: Before opening the package, please check the they are complete and undamaged.
nameplate on it to make sure that you received the
correct variable speed drive. The packaging must contain the following parts:
● VSC series variable speed drive
The VSC series variable speed drives are carefully packaged
and prepared for delivery. The devices should be shipped ● an instructional leaflet
only in their original packaging with suitable transportation
materials. Please take note of the labels and instructions on
the packaging, as well as of those meant for the unpacked
device.
L1/L L2/N
L3
1 2 3 4 5 6 7 8 9 10 11
U V W
Figure 3. Equipment supplied (example: devices with IP20 / IP66 degree of protection with instruction leaflet)
VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com 5
VSC device series
Rated operational data
Rated operational data on the nameplate
The device-specific rated operational data of the VSC variable
speed drive is listed on the nameplate of the device.
2
L1/L L2/N
L3
1 1
1 2 3 4 5 6 7 8 9 10 11
U V W
Figure 4. Nameplate location
The nameplate on top (nameplate 2) is a simplified version
that can be used to clearly identify the device if the main
nameplate (nameplate 1) is blocked by other devices.
6 VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com
VSC device series
Nameplate inscription
The inscription of the nameplate has the following
meaning (example):
Table 2. Nameplate inscription
Inscription Meaning
VSC344D1FBA20C Part no.:
VSC = VSC series variable speed drive
3 = Three-phase mains connection / three-phase motor connection
4 = 400 V mains voltage category
4D1 = 4.1 A rated operational current (4-decimal-1, output current)
F = Integrated radio interference suppression filter
B = Integrated brake chopper
A = LED display (7-segment text display)
20 = IP20 degree of protection
C = Coated boards
Input Rated operational data of mains connection
Three-phase AC voltage (Ue 3~ AC),
380–480 V voltage, 50/60 Hz frequency, input phase current (5.6 A).
Output Load side (motor) rated operational data:
Three-phase AC voltage (0–Ue), output phase current (4.1 A), output frequency
(0–500 Hz)
Assigned motor output:
1.5 kW with a voltage of 400 V/2 hp with a voltage of 460 V for a four-pole, internally cooled
or surface-cooled three-phase asynchronous motor (1500 rpm at 50 Hz / 1800 rpm at 60 Hz)
Serial No.: Serial number
IP20 Degree of protection of the housing: IP 20, UL (cUL) Open Type
Software Software version (2.0)
25072016 Manufacturing date: 07-25-2016
Max amb. 50 °C Maximum permissible ambient air temperature (50 °C)
Variable speed drive is an electrical apparatus.
a Read the manual (in this case LIT-12012386) before making any electrical
connections and commissioning.
VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com 7
VSC device series
Catalog number selection
The catalog no. or part no. for the VSC series of variable
speed drives is made up of four sections.
Series — Power section — Model — Version
The following figure shows it in greater detail:
VSC 1 2 4D1 F N A 20 C
Device series Type
VSC = Series III variable C = Additional PCB
speed drive, compact protection (coated
board)
Connection in power section
1 = Single-phase mains connection / Degree of protection
three-phase motor connection 20 = IP20 / NEMA 0
3 = Three-phase mains connection / 66 = IP66 / NEMA 4X
three-phase motor connection 6S = IP66 with switch /
S = Single-phase mains connection / NEMA 4X, switched
single-phase motor connection
Display unit (display)
Mains voltage category A = LED display
1 = 115 V (110 - 115 V ±10 %)
2 = 230 V (200 - 240 V ±10 %)
4 = 400 V (380 - 480 V ±10 %)
D = 115 V input / 230 V output (voltage doubler) Brake chopper
N = No internal brake
chopper
B = Brake chopper
Rated operational current EMC (radio interference
(examples) suppression filter)
2D2 = 2.2 A N = No internal RFI filter
4D1 = 4.1 A F = Internal RFI filter
046 = 46 A
Figure 5. Catalog number selection
8 VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com
VSC device series
Features
VSC1D… device series
Mains voltage: 1 AC 110–115 V (±10 %), 50/60 Hz
Output voltage: 3 AC 230 V, 50/60 Hz
Note: An internal voltage doubler will increase the mains
supply voltage to 230 V (output voltage).
Table 3. VSC1D… features
Rated
operational Assigned instance
current motor power
Radio
P1 P2 Display interference
Ie (230 V, 50 Hz) (230 V, 60 Hz) (operating Local suppression Degree of Brake
Part no. A kW hp unit) controls filter protection Size chopper
VSC1D2D3NNA20C 2.3 0.37 1/2 LED — — IP20 FS1 —
VSC1D2D3NNA66C 2.3 0.37 1/2 LED — — IP66_x FS1 —
VSC1D2D3NNA6SC 2.3 0.37 1/2 LED ✔ — IP66_x FS1 —
VSC1D4D3NNA20C 4.3 0.75 1 LED — — IP20 FS1 —
VSC1D4D3NNA66C 4.3 0.75 1 LED — — IP66_x FS1 —
VSC1D4D3NNA6SC 4.3 0.75 1 LED ✔ — IP66_x FS1 —
VSC1D5D8NNA20C 5.8 1.1 1-1/2 LED — — IP20 FS2 ✔
VSC1D5D8NNA66C 5.8 1.1 1-1/2 LED — — IP66_x FS2 ✔
VSC1D5D8NNA6SC 5.8 1.1 1-1/2 LED ✔ — IP66_x FS2 ✔
Notes
1 As per IEC standards.
2 As per UL 61800-5-1, Table DVE.1, March 6, 2015.
VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com 9
VSC device series
VSC12… device series
Mains voltage: 1 AC 220–240 V (±10 %), 50/60 Hz
Output voltage: 3 AC 220–240 V, 50/60 Hz
Table 4. VSC12… features
Rated
operational Assigned instance
current motor power
Radio
P1 P2 Display interference
Ie (230 V, 50 Hz) (230 V, 60 Hz) (operating Local suppression Degree of Brake
Part no. A kW hp unit) controls filter protection Size chopper
VSC122D3NNA20C 2.3 0.37 1/2 LED — — IP20 FS1 —
VSC122D3FNA20C 2.3 0.37 1/2 LED — ✔ IP20 FS1 —
VSC122D3NNA66C 2.3 3 0.37 1/2 LED — — IP66_x FS1 —
VSC122D3FNA66C 2.3 3 0.37 1/2 LED — ✔ IP66_x FS1 —
VSC122D3NNA6SC 2.3 3 0.37 1/2 LED ✔ – IP66_x FS1 —
VSC122D3FNA6SC 2.3 3 0.37 1/2 LED ✔ ✔ IP66_x FS1 —
VSC124D3NNA20C 4.3 0.75 1 LED — — IP20 FS1 —
VSC124D3FNA20C 4.3 0.75 1 LED — ✔ IP20 FS1 —
VSC124D3NNA66C 4.3 3 0.75 1 LED — — IP66_x FS1 —
VSC124D3FNA66C 4.3 3 0.75 1 LED — ✔ IP66_x FS1 —
VSC124D3NNA6SC 4.3 3 0.75 1 LED ✔ — IP66_x FS1 —
VSC124D3FNA6SC 4.3 3 0.75 1 LED ✔ ✔ IP66_x FS1 —
VSC127D0NNA20C 7 1.5 2 LED — — IP20 FS1 —
VSC127D0FNA20C 7 1.5 2 LED — ✔ IP20 FS1 —
VSC127D0NBA20C 7 1.5 2 LED — — IP20 FS2 ✔
VSC127D0FBA20C 7 1.5 2 LED — ✔ IP20 FS2 ✔
VSC127D0NNA66C 73 1.5 2 LED — — IP66_x FS1 —
VSC127D0FNA66C 73 1.5 2 LED — ✔ IP66_x FS1 —
VSC127D0NBA66C 73 1.5 2 LED — — IP66_x FS2 ✔
VSC127D0FBA66C 73 1.5 2 LED — ✔ IP66_x FS2 ✔
VSC127D0NNA6SC 73 1.5 2 LED ✔ — IP66_x FS1 —
VSC127D0FNA6SC 73 1.5 2 LED ✔ ✔ IP66_x FS1 —
VSC127D0NBA6SC 73 1.5 2 LED ✔ — IP66_x FS2 ✔
VSC127D0FBA6SC 73 1.5 2 LED ✔ ✔ IP66_x FS2 ✔
Notes
1 As per IEC standards.
2 As per UL 61800-5-1, Table DVE.1, March 6, 2015.
3 Rated operational current at switching frequencies of up to 16 kHz and
ambient temperatures of up to +40 °C.
10 VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com
VSC device series
Table 4. VSC12… features, continued
Rated
operational Assigned instance
current motor power
Radio
P1 P2 Display interference
Ie (230 V, 50 Hz) (230 V, 60 Hz) (operating Local suppression Degree of Brake
Part no. A kW hp unit) controls filter protection Size chopper
VSC12011NBA20C 10.5 6 2.2 3 LED — — IP20 FS2 ✔
VSC12011FBA20C 10.5 6 2.2 3 LED — ✔ IP20 FS2 ✔
VSC12011NBA66C 10.5 3 2.2 3 LED — — IP66_x FS2 ✔
VSC12011FBA66C 10.5 3 2.2 3 LED — ✔ IP66_x FS2 ✔
VSC12011NBA6SC 10.5 3 2.2 3 LED ✔ — IP66_x FS2 ✔
VSC12011FBA6SC 10.5 3 2.2 3 LED ✔ ✔ IP66_x FS2 ✔
VSC12015NBA20C 15.3 5 4 5 LED — — IP20 FS3 ✔
VSC12015NBA66C 15.3 5 4 5 LED — — IP66_x FS3 ✔
VSC12015NBA6SC 15.3 5 4 5 LED ✔ — IP66_x FS3 ✔
Notes
1 As per IEC standards
2 As per UL 61800-5-1, Table DVE.1, March 6, 2015
3 Rated operational current at switching frequencies of up to 16 kHz and
ambient temperatures of up to +40 °C
4 Rated operational current at switching frequencies of up to 8 kHz and
ambient temperatures of up to +50 °C
5 Rated operational current at switching frequencies of up to 8 kHz and
ambient temperatures of up to +40 °C
6 For UL conformity: Rated operational current at ambient temperatures
of up to +45 °C over a period of 24 hours
VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com 11
VSC device series
VSC32… device series
Mains voltage: 3 AC 220–240 V (±10 %), 50/60 Hz
Output voltage: 3 AC 220–240 V, 50/60 Hz
Table 5. VSC32… features
Rated
operational Assigned instance
current motor power
Radio
P1 P2 Display interference
Ie (230 V, 50 Hz) (230 V, 60 Hz) (operating Local suppression Degree of Brake
Part no. A kW hp unit) controls filter protection Size chopper
VSC322D3NNA20C 2.3 0.37 1/2 LED — — IP20 FS1 —
VSC322D3NNA66C 2.3 3 0.37 1/2 LED — — IP66_x FS1 —
VSC322D3NNA6SC 2.3 3 0.37 1/2 LED ✔ — IP66_x FS1 —
VSC324D3NNA20C 4.3 0.75 1 LED — — IP20 FS1 —
VSC324D3NNA66C 4.3 3 0.75 1 LED — — IP66_x FS1 —
VSC324D3NNA6SC 4.3 3 0.75 1 LED ✔ — IP66_x FS1 —
VSC327D0NNA20C 7 1.5 2 LED — — IP20 FS1 —
VSC327D0NBA20C 7 1.5 2 LED — — IP20 FS2 ✔
VSC327D0FBA20C 7 1.5 2 LED — ✔ IP20 FS2 ✔
VSC327D0NNA66C 73 1.5 2 LED — — IP66_x FS1 —
VSC327D0NBA66C 73 1.5 2 LED — — IP66_x FS2 ✔
VSC327D0FBA66C 73 1.5 2 LED — ✔ IP66_x FS2 ✔
VSC327D0NNA6SC 73 1.5 2 LED ✔ — IP66_x FS1 —
VSC327D0NBA6SC 73 1.5 2 LED ✔ — IP66_x FS2 ✔
VSC327D0FBA6SC 73 1.5 2 LED ✔ ✔ IP66_x FS2 ✔
VSC32011NBA20C 10.5 6 2.2 3 LED — — IP20 FS2 ✔
VSC32011FBA20C 10.5 6 2.2 3 LED — ✔ IP20 FS2 ✔
VSC32011NBA66C 10.5 6 2.2 3 LED — — IP66_x FS2 ✔
VSC32011FBA66C 10.5 6 2.2 3 LED — ✔ IP66_x FS2 ✔
VSC32011NBA6SC 10.5 6 2.2 3 LED ✔ — IP66_x FS2 ✔
VSC32011FBA6SC 10.5 6 2.2 3 LED ✔ ✔ IP66_x FS2 ✔
VSC32018NBA20C 18 4 5 LED — — IP20 FS3 ✔
VSC32018FBA20C 18 4 5 LED — ✔ IP20 FS3 ✔
VSC32018NBA66C 18 5 4 5 LED — — IP66_x FS3 ✔
VSC32018FBA66C 18 5 4 5 LED — ✔ IP66_x FS3 ✔
VSC32018NBA6SC 18 5 4 5 LED ✔ — IP66_x FS3 ✔
VSC32018FBA6SC 18 5 4 5 LED ✔ ✔ IP66_x FS3 ✔
Notes
1 As per IEC standards.
2 As per UL 61800-5-1, Table DVE.1, March 6, 2015.
3 Rated operational current at switching frequencies of up to 16 kHz and
ambient temperatures of up to +40 °C.
4 Rated operational current at switching frequencies of up to 8 kHz and
ambient temperatures of up to +50 °C.
5 Rated operational current at switching frequencies of up to 8 kHz and
ambient temperatures of up to +40 °C.
6 For UL conformity: Rated operational current at ambient temperatures
of up to +45 °C over a period of 24 hours.
12 VSC Variable Speed Drives LIT-12012386—October 2016 www.johnsoncontrols.com
VSC device series
Table 5. VSC32… features, continued
Rated
operational Assigned instance
current motor power
Radio
P1 P2 Display interference
Ie (230 V, 50 Hz) (230 V, 60 Hz) (operating Local suppression Degree of Brake
Part no. A kW hp unit) controls filter protection Size chopper
VSC32024NBA20C 24 5.5 7-1/2 LED — — IP20 FS3 ✔
VSC32024FBA20C 24 5.5 7-1/2 LED — ✔ IP20 FS3 ✔
VSC32030NBA20C 30 7.5 Показано початок документа. Повний текст — у PDF за посиланням вище.
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.