| Вид документа | Бюлетень виробу |
|---|---|
| Виробник | JCI |
| Код документа | te-6000-series-temperature-sensing-elements-product-bulletin |
| Група обладнання | TE-6000 Series Temperature Sensing Elements |
| Сторінок | 4 |
| Мова документа | англійська |
| Розмір файлу | 0.1 МБ |
Текст документа
Product Bulletin TE-6000
Issue Date August 26, 2002
TE-6000 Series Temperature Sensing Elements
TE-6000 Series elements typically work with TE-6001
hardware assemblies to provide a wide variety of
temperature-sensing applications. All models have Figure 1: TE-6000-1, -2, -3, -100, and -101
nickel elements except the TE-6359-1 model. Nickel Elements
Users often order elements and hardware separately
and then field assemble them to suit the application.
Refer to TE-6001 Hardware Assemblies for TE-6000
Temperature Elements Product/Technical Bulletin
(LIT-216300) for available hardware configurations
and TE-6100 Series Temperature Sensors and
Completed Sensor/Hardware Assemblies Figure 2: TE-6000-10 Surface Element
Product/Technical Bulletin (LIT-216310) for available
factory assembled units.
Figure 3: TE-6000-11 Bearing Element
Features and Benefits
❑ Accurate Sensing Elements Provide excellent performance in a wide variety
of control applications
❑ Numerous Element Styles Satisfy a variety of temperature-sensing
(Surface, Solar, and Bearing) applications
❑ Bearing Sensing Element Monitors bearing temperature to optimize
(TE-6000-11 only) equipment use and maintenance
© 2002 Johnson Controls, Inc. 1
Code No. LIT-216288 www.johnsoncontrols.com
Operation Platinum
The TE-6359-1 is a 1,000 ohm platinum element in a
IMPORTANT: The TE-6000 Series copper tube. This element is designed to use when
Temperature Sensing Elements are intended to DIN 43760 Class A accuracy is required.
provide input to equipment under normal operating
conditions. Where failure or malfunction of a
TE-6000 element could lead to an abnormal Package Type
operating condition that could cause personal
Discharge
injury or damage to the equipment or other
property, other devices (limit or safety controls) or The TE-6000-5 senses duct discharge air in
systems (alarm or supervisory) intended to warn readjustment applications requiring a 20:1 ratio. The unit
of, or protect against, failure or malfunction of the has a nominal 50 ohm at 70°F (21°C) element with a 2%
TE-6000 element must be incorporated into and resistance tolerance. Connect the TE-6000-5 in series
maintained as part of the control system. with a 1,000 ohm room sensor to the controller.
The TE-6000 element provides a varying resistance Solar
to a controller. When the temperature at the element Use the TE-6000-6 with Johnson Controls electronic
increases, the resistance of the element rises: controllers in solar heating applications requiring
wire-wound element inputs. The maximum temperature
• The nickel element increases 3 ohms/F°
limit for this unit is 350°F (177°C).
(5.4 ohms/C°) with a reference resistance of
1,000 ohms at 70°F (21°C).
Surface
• The platinum element increases 2.2 ohms/F° The TE-6000-10 sensing element is encased in an
(3.9 ohms/C°) with a reference resistance of epoxy-filled, adhesive-backed aluminum mounting block.
1,000 ohms at 32°F (0°C). The epoxy fill effectively conducts surface temperature
changes from the aluminum block to the nickel
Element Type temperature element.
Nickel Bearing
Johnson Controls designed the TE-6000 nickel The TE-6000-11 is encased in a 0.22 in. (5.5 mm)
temperature to use with temperature controllers and diameter by 1 in. (25 mm) long brass tube. It comes with
analog inputs. To suit most application needs, an insulated 10 ft (3 m) two-wire cable.
resistance tolerance at 70°F (21°C) is 1.0% for
models TE-6000-1, -2, and -3 models, and 0.1% for
models TE-6000-100 and -101. (See Technical
Specifications section for more information.)
2 TE-6000 Series Temperature Sensing Elements Product Bulletin
Ordering Information
To order a replacement or an accessory, contact the
nearest Johnson Controls representative. Specify
the desired product code number from Table 1 or
Table 2.
Table 1: Temperature Sensing Elements
Product Code Number Description*
TE-6000-1* 1,000 ohm nickel element
TE-6000-2* 500 ohm nickel element
TE-6000-3* 333 ohm nickel element
TE-6000-5 50 ohm nickel element, ±2.0% accuracy at 70°F (21°C)
TE-6000-6* 1,000 ohm nickel (used in solar heating applications)
TE-6000-10* 1,000 ohm nickel surface element (encased in aluminum mounting block)
TE-6000-11* 1,000 ohm nickel bearing element (encased in a brass tube)
TE-6000-100 1,000 ohm nickel wide range element, ±0.1% accuracy at -50 to 250°F (-46 to 121°C)
TE-6000-101 1,000 ohm nickel narrow range element, ±0.1% accuracy at 55 to 85°F (13 to 29°C)
TE-6359-1 1,000 ohm platinum element, ±0.06% accuracy at 32°F (0°C)
* Accuracy: ±1.0% at 70°F (21°C).
Table 2: Accessories
Code Number Description
TE-6001-1 Duct Temperature Element Holder with Handibox
TE-6001-2 Housing for Outside Air Temperature Sensing Element
TE-6001-3 Handibox, Packing Nut, and Fittings for Use with WZ-1000 Wells
TE-6001-4 Single/Dual Element Holder for TE-6000 Elements in Room Temperature Sensing
Applications
TE-6001-5 Dew Point Sensor Kit
TE-6001-6 Ten Adhesive Mounting Pads for Use with T-4100, T-4110
TE-6001-7 Ten Clips for Use with T-4002/4003 and H-4100/5100
TE-6001-11 Duct Temperature Element Holder (Less Handibox)
TE-6000 Series Temperature Sensing Elements Product Bulletin 3
Technical Specifications
Product TE-6000-1 1,000 ohm nickel element
TE-6000-2 500 ohm nickel element
TE-6000-3 333 ohm nickel element
TE-6000-5 50 ohm nickel element
TE-6000-6 1,000 ohm nickel (used in solar heating applications)
TE-6000-10 1,000 ohm nickel surface element (encased in aluminum mounting
block)
TE-6000-11 1,000 ohm nickel bearing element (encased in a brass tube)
TE-6000-100 1,000 ohm nickel wide range element
TE-6000-101 1,000 ohm nickel narrow range element
TE-6359-1 1,000 ohm platinum element
Sensing Ranges TE-6000-6: -40 to 350°F (-40 to 177°C)
TE-6000-10: 0 to 125°F (-18 to 52°C)
All Other Models: -50 to 250°F (-46 to 121°C)
Elements TE-6359-1: Platinum
All other models: Nickel
Resistance Tolerances TE-6000-1, -2, -3, -6, -10, -11: ±1.0%
TE-6000-5: ±2.0%
TE-6000-100: ±0.1%, range of -50 to 250°F (-46 to 121°C)
TE-6000-101 ±0.1%, range of 55 to 85°F (13 to 29°C)
TE-6359-1: ±0.06% (platinum, DIN Class A)
Temperature Coefficients Nickel: 0.15, 1.0, 1.5 and 3 ohms/F° (0.27,1.8, 2.7, and 5.4 ohms/C°)
(All Positive and for 50, 333.3, 500, and 1,000 ohm elements respectively
Approximate) Platinum: 2.2 ohms/F° (3.9 ohms/C°)
Reference Resistance At 32°F (0°C) TE-6359-1: 1,000 ohms (platinum)
At 70°F (21°C) TE-6000-1, 6, 10, 11, 100, 101: 1,000 ohms (nickel)
TE-6000-2: 500 ohms (nickel)
TE-6000-3: 333 ohms (nickel)
TE-6000-5: 50 ohms (nickel)
Temperature Ranges TE-6000-6: -40 to 350°F (-40 to 177°C)
TE-6000-10: 0 to 125°F (-18 to 52°C)
TE-6000-101 55 to 85°F (13 to 29°C)
All other models: -50 to 250°F (-46 to 121°C)
Sensor Construction TE-6000-6: Black Anodized Aluminum Probe
TE-6000-10: Aluminum Probe
TE-6000-11: Brass Probe
All Other Models: Copper Probe
Field Connection Two wire leads, 18 AWG
Shipping Weight 0.2 lb (0.09 kg)
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Controls Group
507 E. Michigan Street
P.O. Box 423 Printed in U.S.A.
Milwaukee, WI 53201 www.johnsoncontrols.com
4 TE-6000 Series Temperature Sensing Elements Product BulletinПозиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.