Security Control Panel Assembly Mounted in a 30 in. x 42 in. Enclosure Catalog Page

Текст документа

Code No. LIT-1900525
                                                                                                                                                  Issued February 26, 2016

Security Control Panel Assembly Mounted in a 30 in. x 42 in. Enclosure
Description
The 30 in. x 42 in. Security Control Panel is a pre-wired, preassembled
standard control panel and enclosure that contains a CK721-A network
controller and/or S300-DIN-RDR2SA (also called RDR2S-A) modules.
Such a pre-designed solution saves both time and money. Various
models are available to accommodate a variety of common
applications.
The control panel is shipped complete, mounted in a steel enclosure.
The panel is equipped with the required number of 120 VAC/24 VDC
power supplies. The power supply has Uninterruptible Power Supply
(UPS) capability with the addition of factory-wired gel cell batteries
(S300-BAT), which are sold separately. These enclosures are designed
specifically for security control requirements, with battery brackets that
do not need to be removed to install the batteries, a lift-off door, a
pre-wired door tamper switch, and a lockable door with key. Space is
reserved on specific models for the addition of future components.

Features                                                                                                       Security Control Panel Assembly Mounted in a
•   consistent layout for all standard control panel solutions — simplifies                                               30 in. x 42 in. Enclosure
    installation and commissioning
•   space reserved for future component additions — allows easy                                    Repair Information
    upgrading to meet future expansion needs
                                                                                                   If the Security Control Panel Assembly fails to operate within its
•   prebuilt, pre-wired panel, pretested in an ISO-9002 manufacturing
                                                                                                   specifications, replace the failed component. For a replacement,
    facility – provides products of consistently high quality
                                                                                                   contact the nearest Johnson Controls® representative.
Selection Chart                                                                                    Note: Refer to the Security Enclosure Components Catalog Page
                                                                                                   (LIT-1900572) to order components separately.
Product Code Number Description
SPA1B400-2E10                     30 in. x 42 in. (76.2 cm x 10.7 cm) security control
                                  panel with CK721-A controller, four RDR2S-A                      Components of the Security Control Panel Assembly
                                  modules, and two power supplies
                                                                                                    Quantity          Description
SPA1B600-3E10                     30 in. x 42 in. (76.2 cm x 10.7 cm) security control
                                  panel with CK721-A controller, six RDR2S-A                        1                 30 in. x 42 in. (76.2 cm x 107 cm) enclosure, Type 1 with
                                  modules, and three power supplies                                                   keyed lock, door tamper switch, and battery support brackets

SPA1B800-3E10                     30 in. x 42 in. (76.2 cm x 10.7 cm) security control              1                 CK721-A network controller and up to eight RDR2S-A
                                  panel with CK721-A controller, eight RDR2S-A                                        two-door interface modules
                                  modules, and three power supplies                                 2 or 3            S300-DIN-L-PS 24 VDC, 5 A power supplies

Technical Specifications
                                            Security Control Panel Assembly Mounted in a 30 in. x 42 in. Enclosure
Wire Size                                         Ground wire: 14 AWG; 24 VDC controller wires: 18 AWG
Electrical Rating                                 SPA1B400-2E10: 120-240 VAC, 220W, 50/60 Hz for each power supply, two total
                                                  SPA1B600-3E10: 120 VAC, 5.4 A, 50/60 Hz
                                                  SPA1B800-3E10: 120 VAC, 5.4 A, 50/60 Hz
Enclosure Rating                                  NEMA Type 1
Ambient Operating Condition                       32 to 122°F (0 to 50°C), 10 to 85% RH, noncondensing
Dimensions (Width x Height x Depth)               30 in. x 42 in. x 6.62 in.
                                                  (76.2 cm x 107 cm x 16.8 cm)
Ambient Storage Condition                         -4 to 158°F (-20 to 70°C), 5 to 95% RH, noncondensing
Compliance                                        United States:
                                                  UL Listed under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control
                                                  Systems Units when operated at 120 VAC, 3.6 A, 50/60 Hz or 120 VAC, 5.4 A, 50/60 Hz;
                                                  FCC compliant to the limits for a Class B digital device, pursuant to Part 15 of the FCC rules
                                                  Canada:
                                                  cUL under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System when operated at 120 VAC, 3.6 A, 50/60 Hz
                                                  or 120 VAC, 5.4 A, 50/60 Hz; Class B digital apparatus, complies with Canadian ICES-003
                                                  Europe:
                                                  CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the EMC Directive and LVD.
                                                  (SPA1B400-2E10 only)

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2016 Johnson Controls, Inc.                  www.johnsoncontrols.com

                                                                                       1 of 1

Позиції каталогу з цим документом

• SPA1B400-2E10 — PNL CK721A 4 RDR2SA 30X42

Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.