Security Control Panel Assembly Mounted in a 24 in. x 30 in. Enclosure Catalog Page

Текст документа

Code No. LIT-1900524
                                                                                                                                                  Issued February 26, 2016

Security Control Panel Assembly Mounted in a 24 in. x 30 in. Enclosure
Description
The 24 in. x 30 in. Security Control Panel is a pre-wired, preassembled
standard control panel and enclosure that contains a CK721-A network
controller and/or S300-DIN-RDR2SA (also called RDR2S-A) modules.
Such a pre-designed solution saves both time and money. Various
models are available to accommodate a variety of common applications.
The control panel is shipped complete, mounted in a steel enclosure. The
panel is equipped with the required number of 120 VAC/24 VDC power
supplies. The power supply has Uninterruptible Power Supply (UPS)
capability with the addition of factory-wired gel cell batteries (S300-BAT),
which are sold separately. These enclosures are designed specifically for
security control requirements, with battery brackets that do not need to
be removed to install the batteries, a lift-off door, a pre-wired door tamper
switch, and a lockable door with key. Space is reserved on specific
models for the addition of future components.

Features
•   consistent layout for all standard control panel solutions – simplifies                                    Security Control Panel Assembly Mounted in a
    installation and commissioning                                                                                        24 in. x 30 in. Enclosure
•   space reserved for future component additions – allows easy
    upgrading to meet future expansion needs                                                         Repair Information
•   prebuilt, pre-wired panel, pretested in an ISO-9002 manufacturing                                If the Security Control Panel Assembly fails to operate within its
    facility – provides products of consistently high quality                                        specifications, replace the failed component. For a replacement,
                                                                                                     contact the nearest Johnson Controls® representative.
Selection Chart
                                                                                                     Note: Refer to the Security Enclosure Components Catalog Page
Product Code Number Description
                                                                                                     (LIT-1900572) to order components separately.
SPA1B100-1D10                     24 in. x 30 in. (61 cm x 76.2 cm) security control
                                  panel with CK721-A controller, RDR2S-A module,
                                  and one power supply                                               Components of the Security Control Panel Assembly
SPA1B200-1D10                     24 in. x 30 in. (61 cm x 76.2 cm) security control                  Quantity          Description
                                  panel with CK721-A controller, two RDR2S-A
                                  modules, and one power supply                                       1                 24 in. x 30 in. (61 cm x 76.2 cm) enclosure, Type 1 with
                                                                                                                        keyed lock, door tamper switch, and battery support
SPA1B300-2D10                     24 in. x 30 in. (61 cm x 76.2 cm) security control                                    brackets
                                  panel with CK721-A controller, three RDR2S-A
                                  modules, and two power supplies                                     1                 CK721-A network controller and up to four RDR2S-A
                                                                                                                        two-door interface modules.
SPA1B400-2D10                     24 in. x 30 in. (61 cm x 76.2 cm) security control
                                  panel with CK721-A controller, four RDR2S-A                         1 or 2            S300-DIN-L-PS 24 VDC, 5 A power supplies
                                  modules, and two power supplies

Technical Specifications
                                            Security Control Panel Assembly Mounted in a 24 in. x 30 in. Enclosure
Wire Size                              Ground wire: 14 AWG; 24 VDC controller wires: 18 AWG
Electrical Rating                      SPA1B100-1D10: 120-240 VAC, 220W, 50/60 Hz
                                       SPA1B200-1D10: 120-240 VAC, 220W, 50/60 Hz
                                       SPA1B300-2D10: 120-240 VAC, 220W, 50/60 Hz for each power supply, two total
                                       SPA1B400-2D10: 120-240 VAC, 220W, 50/60 Hz for each power supply, two total
Enclosure Rating                       NEMA Type 1
Ambient Operating Condition 32 to 122°F (0 to 50°C), 10 to 85% RH, noncondensing
Dimensions (Width x Height             24 in. x 30 in. x 6.62 in
x Depth)                               (61 cm x 76.2 cm x 16.8 cm)
Ambient Storage Condition              -4 to 158°F (-20 to 70°C), 5 to 95% RH, noncondensing
Compliance                             United States:
                                       UL Listed under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control Systems Units
                                       when operated at 120 VAC, 1.8 A or 3.6 A, 50/60 Hz;
                                       FCC compliant to the limits for a Class B digital device, pursuant to Part 15 of the FCC rules
                                       Canada:
                                       cUL under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System when operated at 120 VAC, 1.8 A or 3.6 A, 50/60 Hz;
                                       Class B digital apparatus, complies with Canadian ICES-003
                                       Europe:
                                       CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the EMC Directive and LVD.

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2016 Johnson Controls, Inc.                  www.johnsoncontrols.com

                                                                                       1 of 1

Позиції каталогу з цим документом

• SPA1B100-1D10 — PNL CK721A RDR2SA 24X30
• SPA1B200-1D10 — PNL CK721A 2 RDR2SA 24X30
• SPA1B400-2D10 — PNL CK721A 4 RDR2SA 24X30

Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.