Security Control Panel Assembly Mounted in a 20 in. x 30 in. Enclosure Catalog Page

Текст документа

Code No. LIT-1900776
                                                                                                                                                  Issued March 14, 2012

Security Control Panel Assembly Mounted in a 20 in. x 30 in. Enclosure
Description
The 20 in. x 30 in. Security Control Panel is a pre-wired, preassembled
standard control panel and enclosure that contains one
S300-DIN-RDR8S (also called RDR8S) module, and , optionally, a
CK721-A network controller. The control panel is shipped complete,
mounted in a steel enclosure. The panel is equipped with a
120 VAC/24 VDC power supply mounted on the panel door. The
power supply has Uninterruptible Power Supply (UPS) capability.
Using the factory cables, the UPS function is activated by connecting
batteries (S300-BAT). These enclosures are designed specifically for
door access control for up to 8 doors, with battery brackets, a wiring
trough for excess cables, a lift-off door, 5 A circuit breaker for
controllers, channels for wiring routing, quick disconnects for power, a
pre-wired door tamper switch, and a lockable door with key.

Features
•   consistent layout for all standard control panel solutions —                                                       Security Control Panel Mounted in a
    simplifies installation and commissioning                                                                               20 in. x 30 in. Enclosure
•   space reserved for future component additions — allows easy
    upgrading to meet future expansion needs
•   prebuilt, pre-wired panel, pretested in an ISO-9002 manufacturing
    facility – provides products of consistently high quality
                                                                                                   Repair Information
                                                                                                   If the Security Control Panel Assembly fails to operate within its
Selection Chart                                                                                    specifications, replace the failed component. For a replacement,
Product Code             Description                                                               contact the nearest Johnson Controls® representative.
Number                                                                                             Note: Refer to the Security Enclosure Components Catalog Page
SPA1D10011G10            20 in. x 30 in. (50.8 cm x 76.2 cm) security control panel                (LIT-1900572) to order components separately.
                         with a CK721-A controller, an RDR8S module, a 5 A
                         circuit breaker, a 120 VAC outlet, and a power supply
                                                                                                   Components of the Security Control Panel Assembly
SPA0D10011G10            20 in. x 30 in. (50.8 cm x 76.2 cm) security control panel
                         with an RDR8S module, a 5 A circuit breaker, a 120 VAC                     Quantity          Description
                         outlet, and a power supply
                                                                                                    1                 20 in. x 30 in. (50.8 cm x 76.2 cm) enclosure, Type 1 with
SPA1D100-1G10            20 in. x 30 in. (50.8 cm x 76.2 cm) security control panel                                   keyed lock, 120 VAC outlet (optional), 5 A circuit breaker, door
                         with a CK721-A controller, an RDR8S module, a 5 A                                            tamper switch, and battery support brackets
                         circuit breaker, and a power supply
                                                                                                    1                 CK721-A network controller (optional) and one RDR8S
SPA0D100-1G10            20 in. x 30 in. (50.8 cm x 76.2 cm) security control panel
                         with an RDR8S module, a 5 A circuit breaker, and a                                           eight-door interface module
                         power supply                                                               1                 S300-DIN-L-PS 24 VDC, 5 A power supply

Technical Specifications
                                            Security Control Panel Assembly Mounted in a 20 in. x 30 in. Enclosure
Wire Size                                         Ground wire: 14 AWG; 24 VDC controller wires: 18 AWG
Electrical Rating                                 SPA1D10011G10: 120 VAC, 1.8 A, 50/60 Hz
                                                  SPA0D10011G10: 120 VAC, 1.8 A, 50/60 Hz
                                                  SPA1D100-1G10: 120 VAC, 1.8 A, 50/60 Hz
                                                  SPA0D100-1G10: 120 VAC, 1.8 A, 50/60 Hz
Enclosure Rating                                  NEMA Type 1
Ambient Operating Condition                       32 to 122°F (0 to 50°C), 10 to 85% RH, noncondensing
Dimensions (Width x Height x Depth)               20 in. x 30 in. x 7.5 in.
                                                  (50.8 cm x 76.2 cm x 19.1 cm)
Ambient Storage Condition                         -4 to 158°F (-20 to 70°C), 5 to 95% RH, noncondensing
Compliance                                        United States:
                                                  UL Listed under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control
                                                  Systems Units;
                                                  FCC compliant to the limits for a Class B digital device, pursuant to Part 15 of the FCC rules
                                                  Canada:
                                                  Class B digital apparatus, complies with Canadian ICES-003;
                                                  cUL Listed for Signaling Appliance
                                                  Europe:
                                                  CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the essential requirements and other
                                                  relevant provisions of the EMC Directive 2004/108/EC and LVD 2006/95/EC.
                                                  Australia and New Zealand:
                                                  C-Tick Mark, Australia/NZ Emissions Compliant

The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2012 Johnson Controls, Inc.                  www.johnsoncontrols.com

                                                                                       1 of 1

Позиції каталогу з цим документом

• SPA0D100-1G10 — PNL RDR8S 20X30
• SPA1D100-1G10 — PNL CK721A RDR8S 20X30

Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.