SiemensETIJohnson ControlsIFMSICKWIKABosch RexrothELKO EPHYUNDAIABBVEGAKSR KUEBLERAlfa Laval

Security Control Panel Assembly Mounted in a 20 in. x 24 in. Enclosure Catalog Page

Вид документаКаталожна сторінка
ВиробникJCI
Код документаsecurity-control-panel-assembly-mounted-in-a-20-in-x-24-in-enclosure-catalog
Група обладнанняSecurity Control Panel
Сторінок1
Мова документаанглійська
Розмір файлу0.1 МБ

О чём документ

Каталог Johnson Controls (код LIT-1900522, от 26 февраля 2016 г.) на предварительно смонтированную и pre-wired охранную контрольную панель в стальном шкафу 20 x 24 дюйма с сетевым контроллером CK721-A и/или модулями S300-DIN-RDR2SA (RDR2S-A). Документ описывает состав моделей, технические характеристики и соответствие стандартам. Пригодится при подборе готового решения для охраны и контроля доступа.

Ключевые характеристики

Параметр Значение
Контроллер CK721-A network controller
Модули до двух RDR2S-A (S300-DIN-RDR2SA), двухдверные интерфейсные модули
Блок питания S300-DIN-L-PS, 24 VDC, 5 A
Резервное питание UPS-возможность с гелевыми батареями S300-BAT (продаются отдельно, заводская проводка)
Электрический рейтинг SPA1B100-1B10 и SPA1B200-1B10: 120–240 VAC, 220 Вт, 50/60 Гц
Размер проводов заземление: 14 AWG; провода контроллера 24 VDC: 18 AWG
Классификация шкафа NEMA Type 1
Рабочие условия 32…122 °F (0…50 °C), 10…85 % RH, без конденсации
Условия хранения −4…158 °F (−20…70 °C), 5…95 % RH, без конденсации
Габариты (Ш x В x Г) 20 x 24 x 6,62 дюйма (50,8 x 61 x 16,8 см)
Конструкция шкафа съёмная дверь с замком под ключ, tamper-выключатель двери, кронштейны для батарей, место для будущих компонентов
Соответствие UL 1076, UL 294 (при 120 VAC, 1,8 A, 50/60 Гц), FCC Part 15 Class B, cUL по ULC/ORD-C1076, ICES-003, CE (EMC Directive, LVD)

Что внутри документа

  • Описание панели: pre-wired, preassembled решение с CK721-A и/или RDR2S-A в стальном шкафу.
  • Преимущества: единая компоновка всех стандартных панелей, место под расширение, предтестирование на производстве ISO-9002.
  • Таблица выбора моделей: SPA1B100-1B10 (контроллер + RDR2S-A + один БП), SPA1B200-1B10 (контроллер + два RDR2S-A + один БП).
  • Состав поставки: шкаф Type 1 с замком, tamper-выключателем и кронштейнами батарей; контроллер и модули; БП 24 VDC, 5 A.
  • Технические спецификации: питание, провода, климатика, габариты.
  • Информация о соответствии: UL 1076, UL 294, FCC, cUL/ORD-C1076, ICES-003, CE.
  • Ремонтная информация: при отказе заменить неисправный компонент через представителя Johnson Controls; отдельные компоненты — по каталогу LIT-1900572.

Частые вопросы

Какие модели панели существуют?
SPA1B100-1B10 — панель с CK721-A, модулем RDR2S-A и одним блоком питания; SPA1B200-1B10 — та же база, но с двумя модулями RDR2S-A и одним блоком питания. Обе — в шкафу 20 x 24 дюйма (50,8 x 61 см).
Нужны ли батареи резервного питания и входят ли они в комплект?
Батареи S300-BAT (гелевые) продаются отдельно, но подключаются заводской проводкой — блок питания имеет UPS-возможность при их установке. Кронштейны для батарей уже есть, снимать их для установки не требуется.
Какой блок питания используется в панели?
S300-DIN-L-PS на 24 VDC, 5 A. Панель при этом питается от сети 120–240 VAC, 220 Вт, 50/60 Гц.
Чем панели сертифицированы?
UL Listed по UL 1076 (проприетарные охранные системы) и UL 294 (системы контроля доступа) при работе от 120 VAC, 1,8 A, 50/60 Гц; для Канады — cUL по ULC/ORD-C1076; также FCC Class B, ICES-003 и CE.
Где заказать компоненты отдельно?
Отдельные компоненты заказываются по каталогу компонентов охранных шкафов LIT-1900572 (Johnson Controls).

Текст документа

Code No. LIT-1900522
                                                                                                                                               Issued February 26, 2016

Security Control Panel Assembly Mounted in a 20 in. x 24 in. Enclosure
Description
The 20 in. x 24 in. Security Control Panel is a pre-wired, preassembled
standard control panel and enclosure that contains a CK721-A network
controller and/or S300-DIN-RDR2SA (also called RDR2S-A) modules.
Such a pre-designed solution saves both time and money. Various
models are available to accommodate a variety of common
applications.
The control panel is shipped complete, mounted in a steel enclosure.
The panel is equipped with the required number of 120 VAC/24 VDC
power supplies. The power supply has Uninterruptible Power Supply
(UPS) capability with the addition of factory-wired gel cell batteries
(S300-BAT), which are sold separately. These enclosures are designed
specifically for security control requirements, with battery brackets that
do not need to be removed to install the batteries, a lift-off door, a
pre-wired door tamper switch, and a lockable door with key. Space is
reserved on specific models for the addition of future components.
                                                                                                             Security Control Panel Assembly Mounted in a
Features                                                                                                                20 in. x 24 in. Enclosure
•   consistent layout for all standard control panel solutions – simplifies
    installation and commissioning                                                               Repair Information
•   space reserved for future component additions – allows easy                                  If the Security Control Panel Assembly fails to operate within its
    upgrading to meet future expansion needs                                                     specifications, replace the failed component. For a replacement,
•   prebuilt, pre-wired panel, pretested in an ISO-9002 manufacturing                            contact the nearest Johnson Controls® representative.
    facility – provides products of consistently high quality                                    Note: Refer to the Security Enclosure Components Catalog Page
                                                                                                 (LIT-1900572) to order components separately.
Selection Chart
                                                                                                 Components of the Security Control Panel Assembly
Product Code Number Description
SPA1B100-1B10                    20 in. x 24 in. (50.8 cm x 61 cm) security control               Quantity          Description
                                 panel with CK721-A controller, RDR2S-A module,                   1                 20 in. x 24 in. (50.8 cm x 61 cm) enclosure, Type 1 with keyed
                                 and one power supply                                                               lock, door tamper switch, and battery support brackets
SPA1B200-1B10                    20 in. x 24 in. (50.8 cm x 61 cm) security control               1                 CK721-A network controller and up to two RDR2S-A
                                 panel with CK721-A controller, two RDR2S-A                                         two-door interface modules
                                 modules, and one power supply
                                                                                                  1                 S300-DIN-L-PS 24 VDC, 5 A power supply

Technical Specifications
                                           Security Control Panel Assembly Mounted in a 20 in. x 24 in. Enclosure
Wire Size                                        Ground wire: 14 AWG; 24 VDC controller wires: 18 AWG
Electrical Rating                                SPA1B100-1B10: 120-240 VAC, 220W, 50/60 Hz
                                                 SPA1B200-1B10: 120-240 VAC, 220W, 50/60 Hz
Enclosure Rating                                 NEMA Type 1
Ambient Operating Condition                      32 to 122°F (0 to 50°C), 10 to 85% RH, noncondensing
Dimensions (Width x Height x Depth)              20 in. x 24 in. x 6.62 in. (50.8 cm x 61 cm x 16.8 cm)
Ambient Storage Condition                        -4 to 158°F (-20 to 70°C), 5 to 95% RH, noncondensing
Compliance                                       United States:
                                                 UL Listed under UL 1076 for Proprietary Burglar Alarm Units and Systems, and under UL 294 for Access Control
                                                 Systems Units when operated at 120 VAC, 1.8 A, 50/60 Hz;
                                                 FCC compliant to the limits for a Class B digital device, pursuant to Part 15 of the FCC rules
                                                 Canada:
                                                 cUL under ULC/ORD-C1076 Proprietary Burglar Alarm Units and System when operated at 120 VAC, 1.8 A, 50/60 Hz;
                                                 Class B digital apparatus, complies with Canadian ICES-003
                                                 Europe:
                                                 CE Mark – Johnson Controls, Inc., declares that this product is in compliance with the EMC Directive and LVD.

2016The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls
office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2016 Johnson Controls, Inc.       www.johnsoncontrols.com

                                                                                     1 of 1

Позиції каталогу з цим документом

Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.