| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | JCI |
| Код документа | r-2080-1-1-booster-relay-catalog-page |
| Група обладнання | R-2080 Booster Relay |
| Сторінок | 1 |
| Мова документа | англійська |
| Розмір файлу | 0.0 МБ |
Текст документа
Code No. LIT-1921465
Issued January 15, 2008
R-2080
1:1 Booster Relay
Description Applications
The R-2080 Booster Relay operates as a • amplifies a pilot signal from a non-relay,
pneumatic repeater and volume amplifier. The low volume controller to a large volume
pilot signal is repeated at its output at a 1:1 output signal
ratio. • develops an accurate and direct acting 1:1
Refer to R-2080 1:1 Booster Relay Product relationship between pilot and output
Bulletin (LIT-7171460) for important product pressures over its operating range
information. • improves the response time of a controlled
device
Repair Information • operates additional devices
If the R-2080 Booster Relay fails to operate R-2080 Booster Relay
within its specifications, replace the unit. For a
Selection Chart
replacement relay, contact the nearest Code Number Description
Johnson Controls® representative. R-2080-1 R-2080 Booster Relay
R-4000-100 Accessory Mounting Bracket
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc. www.johnsoncontrols.comПозиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.
