| Вид документа | Технічний паспорт |
|---|---|
| Виробник | JCI |
| Моделі | VA9104-AGA-1S, VA9104-IGA-1S, VA9104-IUA-1S |
| Група обладнання | valves |
| Мова документа | англійська |
| Розмір файлу | 0.3 МБ |
Про документ
The VA9104 electric actuator series are synchronous, motor-driven, direct-mountable actuators developed for the operation of ball valves. They provide accurate positioning on VG1000 series DN15, DN20 and DN25 ball valves and are available in floating-control and ON/OFF variants.
Ключові дані
| Running torque | 4 Nm |
|---|---|
| Travel time | 60 Seconds at 60 Hz (for 90° of Rotation); 72 Seconds at 50 Hz |
| Power requirements | AC 24 V +25% / -20% at 50/60 Hz (AGA/IGA); AC 100 to 240V -15%/+10% at 50/60 Hz (IUA) |
| Rotation range | 93° ±3°, CW or CCW |
| Enclosure | IP 42 |
| Operating temperature | -20 to 60 °C; 90% RH Maximum, Noncondensing |
| Electrical connections | 1.2 m Polyvinyl Chloride (PVC) cable |
| Shipping weight | 0.5 Kg |
Застосування
- Operation of ball valves (VG1000 series DN15, DN20, DN25)
- Floating control or ON/OFF positioning
Особливості
- Floating control with Timeout
- Load-independent running time
- Up to 5 actuators in parallel operation possible
- Manual release button
- 1,2 m PVC cable
Технічні дані
| Parameter | Value |
|---|---|
| Power Requirements (VA9104-AGA-1S / VA9104-IGA-1S) | AC 24 V +25% / -20% at 50/60 Hz |
| Power Requirements (VA9104-IUA-1S) | AC 100 to 240V -15%/+10% at 50/60 Hz |
| Power consumption | 2.1 VA (AGA), 3.0 VA (IGA), 7.5 VA Supply and 0.07 A (IUA) |
| Control Type | Floating Control without Timeout (AGA); ON/OFF and Floating Control With Timeout (IGA/IUA) |
| Input Signal | AC 24 V +25% / -20% at 50/60 Hz, SELV or Class II (AGA/IGA); AC 100 to 240V -15%/+10% at 50/60 Hz Class II (IUA) |
| Feedback Signal | --- |
| Motor Input Impedance | 200 ohms Nominal |
| Running Torque | 4 Nm |
| Travel Time (for 90° of Rotation) | 60 Seconds at 60 Hz; 72 Seconds at 50 Hz |
| Rotation Range | 93° ±3°, CW or CCW |
| Cycles | 100,000 Full Stroke Cycles; 2,500,000 Repositions at Rated Running Torque |
| Audible Noise Rating | 35 dBA Nominal at 1 m |
| Electrical Connections | 1.2 m Polyvinyl Chloride (PVC) cable |
| Mechanical Connections | Up to 13 mm Diameter Round Damper Shafts, or 10 mm Square Damper Shafts |
| Enclosure | IP 42 |
| Ambient Conditions - Operating | -20 to 60 °C; 90% RH Maximum, Noncondensing |
| Ambient Conditions - Storage | -40 to 85 °C; 90% RH Maximum, Noncondensing |
| Fluid Temperature Limits - Water | VG1205 and VG1805 Series Valves: -30 to +95 °C (140 °C with M9000-561 Thermal Barrier) |
| Fluid Temperature Limits - Steam | Rated for Steam Service only with M9000-561 Thermal Barrier |
| Shipping Weight | 0.5 Kg |
| Valve Size (DN)* | A | B | C | D | E | F | G |
|---|---|---|---|---|---|---|---|
| DN15 | 98 | 17 | 31 | 129 | 64 | 9 | 32 |
| DN20 | 98 | 17 | 31 | 133 | 71 | 9 | 36 |
| DN25 | 100 | 19 | 33 | 141 | 87 | 9 | 43 |
Note: * On models with the flow-characterizing disk, the disk is located in Port A. Port A must be the Valve inlet.
Minimum clearance required: 89 mm.
Варіанти замовлення
| Code | Description |
|---|---|
| VA9104-AGA-1S | 4 Nm, AC 24 V with 1,2 PVC cable |
| VA9104-IGA-1S | 4 Nm, AC 24 V with 1,2 PVC cable |
| VA9104-IUA-1S | 4 Nm, AC 100 to 240V with 1,2 PVC cable |
Допуски та стандарти
- EMC Directive 2004/108/EC
- Low Voltage Directive 2006/95/EC
Позиції каталогу з цим документом
Текст документа
A C T U A T O R S f o r V A L V E S
4.19
VA9104-AGA-1S / VA9104-IGA-1S / VA9104-IUA-1S
Electric Non-Spring Return Valve Actuators
Application
The VA9104 electric actuator series have been
developped for the operation of ball valves.
These synchronous, motor-driven direct mountable
actuators are used to provide accurate positioning
on VG1000 series DN15, DN20 and DN25 ball
valves.
Features
■■ Floating control with Timeout
■■ Load-independent running time
■■ Up to 5 actuators in parallel operation possible
■■ Manual release button
■■ 1,2 m. PVC cable
Minimum Clearance Required
89
71 140
F
A
C C
B B
E E
D G
Two-Way Valve Three-Way Valve Two-Way Valve Three-Way Valve
Dimensions (in mm)
Valve Size (DN)* A B C D E F G
DN15 98 17 31 129 64 9 32
PB_VA9104-AGA-1S / VA9104-IGA-1S / VA9104-IUA-1S _10 2014
DN20 98 17 31 133 71 9 36
DN25 100 19 33 141 87 9 43
Note: * On models with the flow-characterizing disk, the disk is located in Port A.
Port A must be the Valve inlet.
- Page 1 -
This document is subject to change without notice.
A C T U A T O R S f o r V A L V E S
4.19
VA9104-AGA-1S / VA9104-IGA-1S / VA9104-IUA-1S
Electric Non-Spring Return Valve Actuators
Control Wiring Diagrams Mounting
VA9104-AGA-1S
VA9104-IGA-1S Floating
VA9104-IGA-1S - ON/OFF
~ ~
WHT BLK ORN
PB_VA9104-AGA-1S / VA9104-IGA-1S / VA9104-IUA-1S _10 2014
AC 100...240 V 50/60 Hz
VA9104-IUA-1S Floating
WHT BLK ORN
ON DA
S1
OFF
RA
S1
AC 100...240 V 50/60 Hz
VA9104-IUA-1S - ON/OFF
- Page 2 -
This document is subject to change without notice.
A C T U A T O R S f o r V A L V E S
4.19
VA9104-AGA-1S / VA9104-IGA-1S / VA9104-IUA-1S
Electric Non-Spring Return Valve Actuators
Technical Specifications
Product Codes VA9104-AGA-1S VA9104-IGA-1S VA9104-IUA-1S
Power Requirements AC 24 V +25% / -20% at 50/60 Hz AC 100 to 240V -15%/+10%
at 50/60 Hz
2.1 VA 3.0 VA 7.5 VA Supply and 0.07 A
Control Type Floating Control without Timeout ON/OFF and Floating Control With Timeout
Input Signal AC 24 V +25% / -20% at 50/60 Hz, SELV or Class II AC 100 to 240V -15%/+10%
at 50/60 Hz Class II
Feedback Signal ---
Motor Input Impedance 200 ohms Nominal
Running Torque 4 Nm
Travel Time 60 Seconds at 60 Hz
(for 90° of Rotation) 72 Seconds at 50 Hz
Rotation Range 93° ±3°, CW or CCW
Cycles 100,000 Full Stroke Cycles;
2,500,000 Repositions at Rated Running Torque
Audible Noise Rating 35 dBA Nominal at 1 m
Electrical Connections 1.2 m Polyvinyl Chloride (PVC) cable
Mechanical Connections Up to13 mm Diameter Round Damper Shafts, or 10 mm Square Damper Shafts
Enclosure IP 42
Ambient Conditions
- Operating -20 to 60 °C; 90% RH Maximum, Noncondensing
- Storage -40 to 85 °C; 90% RH Maximum, Noncondensing
Fluid Temperature Limits
(Actuator and Valve Assembly)
- Water VG1205 and VG1805 Series Valves: -30 to +95 °C (140 °C with M9000-561 Thermal Barrier)
- Steam Rated for Steam Service only with M9000-561 Thermal Barrier
Shipping Weight 0.5 Kg
Johnson Controls, Inc., declares that these products are in compliance with the essential requirements and other
Compliance relevant provisions of the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC
Ordering Codes
Codes Descriptions
VA9104-AGA-1S 4 Nm, AC 24 V with 1,2 PVC cable
PB_VA9104-AGA-1S / VA9104-IGA-1S / VA9104-IUA-1S _10 2014
VA9104-IGA-1S 4 Nm, AC 24 V with 1,2 PVC cable
VA9104-IUA-1S 4 Nm, AC 100 to 240V with 1,2 PVC cable
Building Efficiency
Headquarters: Milwaukee, Wisconsin, USA
Branch Officies: Principal Cities World-wide
Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners.
© Copyright 2014 Johnson Controls, Inc. All rights reserved. Any unauthorized use or copying is strictly prohibited.
Published in Europe - Page 3 - www.johnsoncontrols.com
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.