| Вид документа | Технічний паспорт |
|---|
| Виробник | JCI |
|---|
| Моделі | RS-1140-0000, RS-1150-0000, RS-1160-0000, RS-1160-0005, RS-1180-0000, RS-1180-0005, RS-1190-0000, RS-1190-0005 |
|---|
| Група обладнання | automation |
|---|
| Мова документа | англійська |
|---|
| Розмір файлу | 1.2 МБ |
|---|
Про документ
The RS-1100 Series Room Command Modules are room units for use with Johnson Controls Facility Explorer Series or System 91 controllers. They provide a 0…10 V signal directly proportional to the sensed temperature and let the occupant view space temperature and adjust the setpoint via an LCD display and dial (on display models) or a simple dial/pushbutton (on non-display models). Models are available with or without LCD display, setpoint adjustment dial, temporary occupied override function, and fan speed selection.
Ключові дані
| output signal | 0 to 10 VDC (linear in the range of 0 to 40 °C) |
|---|
| sensing element | Pt1000 class A / class B, EN 60751 |
|---|
| power requirement | 15 VDC ± 5% or 24 VDC ± 15% / 24 VAC ±15%, 50/60 Hz |
|---|
| ambient operating conditions | 0 to 50 °C, 10 to 90% RH non condensing (max. 30 °C dew point) |
|---|
| protection class | IP30 (EN 60529) |
|---|
| accuracy (models with display) | ±0.5°C |
|---|
| setpoint adjustment range | ±3 °C or 12...28 °C |
|---|
| enclosure material | ABS+PC; self extinguishing HB UL 94 |
|---|
Застосування
- Space temperature sensing in rooms controlled by TC-9100 Series, SC-9100 Series, DC-9100 Series, DX-9100 Series, FX Series controllers (except FX05)
- Public buildings and hotels
- Occupant comfort control: setpoint adjustment, temporary occupancy override, fan speed selection
Особливості
- Modern cover which snaps onto a plug-in mounting base; easy installation
- Compact backlit display with time out, suitable for dimly lit conditions
- Big temperature setpoint adjustment dial for easy operation
- Integrated temporary override function on LCD display models; pushbutton on non-display models
- Fan speed selection button on models with display (Auto-OFF-1-2-3)
- Terminals located on mounting base for easy wiring and commissioning
- Green LED indicates occupation mode status
- Maintenance symbol shows temperature sensor failure
Технічні дані
| Parameter |
Value |
| Power requirement |
15 VDC ± 5% (models without display); 15 VDC ± 5% or 24 VDC ± 15%, 24 VAC ±15%, 50/60 Hz (models with display) |
| Power consumption |
0.1 VA no load / 0.15 VA max load (without display); 1 VA no load / 1.5 VA max load (with display) |
| Ambient operating conditions |
0 to 50 °C, 10 to 90% RH non condensing (and max. 30 °C dew point) |
| Ambient storage conditions |
-40 to 70 °C, 5 to 95% RH non condensing (and max. 30 °C dew point) |
| Sensing element |
Pt1000 class A, EN 60751 (output signals table); Pt1000 class B, EN 60751 (sensing element row) |
| Output signal, ambient temperature |
0 to 10 VDC (linear in the range of 0 to 40 °C) |
| Output signal, temperature setpoint |
0 to 10 VDC, linear in the range of 0 to 40 °C (actual range 3 to 7 V) |
| Output signal, temporary occupancy request |
Momentary contact switch (5 V at 1 mA) without display; Open Collector - 1 V @ 2 mA max. with display |
| Output signal, fan speed override |
--- (without display); 0...10 VDC (with display, Auto-OFF-1-2-3) |
| Output load |
min. 5 kΩ − max. 2 mA |
| Accuracy |
3.5% from 0 to 10°C; 1.2% from 10 to 30°C; 3.5% from 30 to 40°C (without display); ±0.5°C (with display) |
| Operation status indication |
Green LED for occupation mode indication and symbol for sensor failure; 3-digit LCD display for temperature indication (resolution: 0.5 °C) and 6 symbols for Fan Speed (with display) |
| Terminations |
Terminal block with screw terminals in base for 1,5 mm² / 14 AWG (max.) wires |
| Mounting |
Direct surface mounting; plastic base for surface mount with wiring conduits available on request |
| Enclosure material |
ABS+PC; self extinguishing HB UL 94 |
| Colours |
Enclosure - Base - Occupancy Override Button: RAL9016 (GE86280); Setpoint Dial: RAL7047 (GE GY81118); Backlight: White |
| Protection class |
Enclosure: IP30 (EN 60529) |
| Dimensions (H x W x D) |
RS-1140-0000 / RS-1150-0000: 80 mm x 80 mm x 32 mm; RS-1160-000x / RS-1190-000x: 80 mm x 80 mm x 35 mm; RS-1180-000x: 80 mm x 80 mm x 35 mm |
| Shipping weight |
0,2 kg |
Варіанти замовлення
| Ordering code |
LCD Display |
Setpoint Adjustment Dial Range |
Temporary Occupancy Override Function |
Fan Speed Selection |
| RS-1140-0000 |
--- |
--- |
--- |
--- |
| RS-1150-0000 |
--- |
--- |
Pushbutton |
--- |
| RS-1160-0000 |
--- |
12...28 °C |
Pushbutton |
--- |
| RS-1160-0005 |
--- |
-...+ |
Pushbutton |
--- |
| RS-1180-0000 |
Yes |
12...28 °C |
Integrated |
--- |
| RS-1180-0005 |
Yes |
-...+ |
Integrated |
--- |
| RS-1190-0000 |
--- |
12...28 °C |
--- |
--- |
| RS-1190-0005 |
--- |
-...+ |
--- |
--- |
| RS-1180-0002 |
Yes |
12...28 °C |
Integrated |
Yes |
| RS-1180-0007 |
Yes |
-...+ |
Integrated |
Yes |
Accessories (order separately):
- TM-1100-8931 — Plastic Surface Mounting Kit
- TM-9100-8900 — Pointed tool for enclosure opening
Допуски та стандарти
- CE Directive: 2004/108/EC, EN 61000-6-3, EN 61000-6-2
- Sensing element per EN 60751
- Protection class per EN 60529
Позиції каталогу з цим документом
Текст документа
RS-1100 Series Room Command Module
Product Bulletin
PB_RS-1100
Issue Date 09 2009
The RS-1100 Room Command Modules
are designed for use with Facility Explorer Series
or System 91 controllers from Johnson Controls
and provides a 0…10 V signal directly proportional
to the sensed temperature.
Models are available with and without LCD display,
room temperature setpoint adjustment dial,
temporary occupied override function, and fan speed
selection.
The LCD display and the dial on the front
of the module allow the room occupant to view the
space temperature and adjust the temperature
setpoint. Modules with LCD display will automatically
request the temporary occupied (bypass) mode
when the dial is moved during unoccupied or
standby periods.
On models without LCD display this function
is activated by means of the temporary occupied
button on the left side of the module.
Features and Benefits
Features Benefits
Modern and attractive cover which snaps Blends in with room decor. Easy installation.
onto a plug-in mounting base
Compact Display for temperature Easy to read
indication
Display is back lighted with time out Suitable for dimly lit conditions
Big temperature setpoint adjustment dial Easy operations for the user
All models available with or without Covers a large number of applications in public buildings and hotels
occupancy override
Integrated Temporary override function Easy override without the need of an additional push button
on LCD display models
Terminals located on mounting base Easy wiring and commissioning
Models with display available with Fan Covers a large number of applications
Speed Button
RS-1100 Series Room Command Module - Product Bulletin 1
Environmental and Comfort Data Fan Speed Override
for the Occupant The user can press the fan pushbutton to change
All RS-1100 Series Room Command Modules the fan speed. The actual fan status is shown by the
provides a 0...10 V signal directly proportional speed bars and the AUTO symbol disappears to
to the sensed temperature. confirm a manual override condition. When the fan is
stopped in the manual mode, the OFF symbol
Models without LCD Display without appears.
Temperature Dial
Pressing the pushbutton until the AUTO symbol
These models are used for space temperature appears cancels a manual override and restores
sensing only. automatic fan speed control according to the room
Models without LCD Display temperature and setpoint.
with Temperature Dial Fan Speed Override Display
The setpoint dial indicates the desired room
temperature setpoint. LCD Display
Fan Speed
When the controller is not in occupied mode, Three speed
the green LED blinks slowly. Operating the
pushbutton will set the controller into temporary Auto AUTO
occupied mode and the LED will go steady
indicating the comfort mode.
Off OFF
Models with LCD Display
The room command module displays the space
temperature. When the occupant is moving the dial 1st speed
the setpoint is displayed with a slow blink cycle.
The maintenance symbol of the display can show: 2nd speed
• Temperature Sensor Failure
Controlling Comfort and the 3rd speed
Environment
The RS-1100 room command modules with
Temperature Dial are configured to allow the
occupant to adjust or override operating parameters Installation
of the connected controller. The room command module has a separable base
with wiring terminals. The base is installed first and
Set point adjust
the power and network wiring can be completed and
The set point of the controller can be adjusted for checked before installing the electronic circuits that
a warmer or cooler temperature within the range are located in the room module cover.
of ±3 °C or to a specific temperature within a range
of values such as 12 to 28 °C using the dial on the This procedure provides the easiest and safest way
face of the module. to install the control system and avoids accidental
damage to the electronic circuits when being
Temporary occupancy override mounted in the room on the construction site.
Outside of the normal occupancy periods, in the
evening or on the weekend for example, one touch A surface mounting kit is available for the Room
on the dial (for models with LCD display) or Command Module.
pushbutton (for models without display) will give the
occupant comfort conditions for a set period of time.
The green LED is configured to slowly blink when
the controller is not in occupied or temporary
occupied mode.
2 RS-1100 Series Room Command Module - Product Bulletin
Mounting Mounting Kit
Direct Wall Mounting They may also be mounted by using the mounting kit
shown. The wiring must be entered from the back.
The RS-1100 room sensors are suitable for direct
wall mounting using two of the four screw holes
U P OB EN
on the base.
• Choose an appropriate place to achieve
58
good control of the ambient temperature.
The room temperature element only senses 5.0 78
the temperature at the place where it is
mounted. 3.5
• When mounting ensure that there is sufficient
space for air circulation but do not mount
the sensor near windows or doors so as to avoid
draughts that will falsify measurements. 25 78
• Put insulation material in the wiring conduit to 11
prevent introduction of air from outside the room. 17
13
The sensor should not be exposed to direct radiation 20
(lamps, radiators, etc.) or to the sun, as this would
lead to incorrect measurement. Figure 2: TM-1100-8931 Surface Mounting Kit
• Remove one of the notches (A) with a suitable
tool.
U P OB EN
A
B
• Mark the position of the holes (B) on the wall and
drill holes 5 mm in diameter. Insert plastic plugs
into holes.
D
C
Figure 1: RS-1100 Mounting Base
C o n d u it
• Position and fix the mounting base to the wall
using the two long screws (C) provided in the kit.
• Fix the base of the RS-1100 to the mounting
base using the two short screws (D) provided in
the kit.
RS-1100 Series Room Command Module - Product Bulletin 3
Wiring
• All wiring must be in accordance with local
regulations and national rules.
• Do not attempt field repairs. If the transmitter is
not operating properly, even though it is wired
correctly, it should be replaced.
WARNING
When wiring or servicing make sure
that:
• The electric voltage to the sensor is Figure 6: RS-1180-0000 and RS-1180-0005
switched off to avoid possible
! damage to the equipment, personal
injury or shock.
• You do not touch or attempt to
connect or disconnect wires when
electric power is on.
Figure 7: RS-1180-0002 and RS-1180-0007
Figure 3: RS-1140-0000
Figure 8: RS-1190-0000 and RS-1190-0005
Figure 4: RS-1150 - 0000
Figure 5: RS-1160-0000 and RS-1160-0005
4 RS-1100 Series Room Command Module - Product Bulletin
Dimensions in mm and Printings
Figure 9: RS-1140-0000
Figure 10: RS-1150-0000
Figure 11: RS-1160-0000
RS-1100 Series Room Command Module - Product Bulletin 5
Figure 12: RS-1160-0005
Figure 13: RS-1190-0000
Figure 14: RS-1190-0005
6 RS-1100 Series Room Command Module - Product Bulletin
Figure 15: RS-1180-0000 and RS-1180-0005
Figure 16: RS-1180-0002 and RS-1180-0007
RS-1100 Series Room Command Module - Product Bulletin 7
Ordering Codes
Room Command Module
Interface to Occupant Suitable Controllers
Fan speed Selection
TC-9100 Series SC-9100 Series DC-9100 Series DX-9100 Series
FX Series
LCD Display
Ordering Setpoint Temporary
Codes Occupancy
Adjustment
Ovveride
Dial Range Function (Except FX05)
RS-1140-0000 --- --- --- --- Yes Yes Yes Yes Yes
RS-1150-0000 --- --- Pushbutton --- Yes Yes Yes Yes Yes
RS-1160-0000 --- 12...28 °C Pushbutton --- Yes Yes Yes Yes Yes
RS-1160-0005 --- -...+ Pushbutton --- Yes Yes Yes Yes Yes
RS-1180-0000 Yes 12...28 °C Integrated --- Yes Yes Yes Yes Yes
RS-1180-0005 Yes -...+ Integrated --- Yes Yes Yes Yes Yes
RS-1190-0000 --- 12...28 °C --- --- Yes Yes Yes Yes Yes
RS-1190-0005 --- -...+ --- --- Yes Yes Yes Yes Yes
RS-1180-0002 Yes 12...28 °C Integrated Yes Yes Yes Yes Yes Yes
RS-1180-0007 Yes -...+ Integrated Yes Yes Yes Yes Yes Yes
Accessories (order separately)
Ordering Codes Description
TM-1100-8931 Plastic Surface Mounting Kit
TM-9100-8900 Pointed tool for enclosure opening
8 RS-1100 Series Room Command Module - Product Bulletin
Technical Specifications
Products Models without Display Models with Display
RS-1140-0000
RS-1150-0000
RS-1160-000x RS-1180-000x
RS-1190-000x
Power Requirement 15 VDC ± 5%
15 VDC ± 5% 24 VDC ± 15%
24 VAC ±15%, 50/60 Hz
Power Consumption 0.1 VA, no load 1 VA, no load
0.15 VA, max load 1.5 VA, max load
Ambient Operating 0 to 50 °C
Conditions 10 to 90% RH non condensing (and max. 30 °C dew point)
Ambient Storage -40 to 70 °C
Conditions 5 to 95% RH non condensing (and max. 30 °C dew point)
Sensing Element Pt1000 class A, EN 60751
Output Signals Ambient Temperature: Ambient Temperature:
0 to 10 VDC (linear in the range of 0 to 40 °C) 0 to 10 VDC (linear in the range of 0 to 40 °C)
Temperature Setpoint: Temperature Setpoint:
0 to 10 VDC, linear in the range of 0 to 40 °C 0 to 10 VDC, linear in the range of 0 to 40 °C
(actual range 3 to 7 V) (actual range 3 to 7 V)
Temporary Occupancy Request: Temporary Occupancy Request:
Momentary contact switch (5 V at 1 mA) Open Collector - 1 V @ 2 mA max.
Fan Speed Override: Fan Speed Override (Auto-OFF-1-2-3):
--- 0...10 VDC
Output load min. 5 kΩ − max. 2 mA
Sensing Element Pt1000 class B, EN 60751
Accuracy 3.5% from 0 to 10°C
1.2% from 10 to 30°C ±0.5°C
3.5% from 30 to 40°C
Operation Status 3-digit LCD display for temperature indication
Indication Green LED for occupation mode indication (resolution: 0.5 °C) and 6 symbols for Fan Speed
and symbol for sensor failure.
Terminations Terminal block with screw terminals in base for 1,5 mm² / 14 AWG (max.) wires
Mounting Direct surface mounting.
Plastic base for surface mount with wiring conduits available on request
(see “Ordering Codes”)
Enclosure Material ABS+PC; self estinguishing HB UL 94
Colours Enclosure - Base - Occupancy Override Button: RAL9016 (GE86280)
Setpoint Dial: RAL7047 (GE GY81118)
Backlight: White
Protection Class Enclosure: IP30 (EN 60529)
Dimension RS-1140-0000 / RS-1150-0000
(H x W x D) 80 mm x 80 mm x 32 mm RS-1180-000x
RS-1160-000x / RS-1190-000x 80 mm x 80 mm x 35 mm
80 mm x 80 mm x 35 mm
Shipping Weight 0,2 kg
CE Directive:
Compliance 2004 / 108 / EC EN 61000-6-3, EN 61000-6-2
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from
misapplication or misuse of its products.
Johnson Controls International, Inc.
Headquarters: Milwaukee, Wisconsin, USA
Branch Offices: Principal Cities World-wide
www.johnsoncontrols.com RS-1100 Series Room Command Module - Product Bulletin 9
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.
