| Вид документа | Каталожна сторінка |
|---|
| Виробник | JCI |
|---|
| Моделі | PT-5217-7 |
|---|
| Група обладнання | pressure |
|---|
| Мова документа | англійська |
|---|
| Розмір файлу | 0.2 МБ |
|---|
Про документ
The PT-5217 Pressure Transmitter accurately measures pressure and converts the measurement into a standard proportional 0...10 V signal. It uses a ceramic piezo-resistive chip sensing element and is especially adapted to measure air, water and inert gases pressure. It can also be used in pneumatic control systems to convert pneumatic into electric standard signals.
Ключові дані
| Operating ranges | 0...1 bar or 0...10 bar |
|---|
| Output | 0...+10 V, max. 1 mA (> 10 kΩ) |
|---|
| Supply voltage | 24 VAC +15/-10%, 50/60 Hz or 18...33 VDC, max. 5 mA |
|---|
| Accuracy (linearity, hysteresis, repeatability) | < ± 0,5% of operating range in total |
|---|
| Pressure connection | G ¼ ”, Stainless steel 1.4305 with EPDM gasket |
|---|
| Protection class | IP65, (IEC 144) |
|---|
| Ambient operating conditions | -15 to +80 °C |
|---|
| Medium | Air, water and inert gases |
|---|
Застосування
- Accurate and stable pressure measurement of air, water and inert gases
- Conversion of pneumatic signals into electric standard signals in pneumatic control systems
- Indoor/outdoor applications
Особливості
- Low zero drift/time
- Low sensibility to ambient temperature change
- Low hysteresis
- High accuracy
- Direct mounting, 1.5 m cable included — saves installation time
- Splash proof enclosure
Технічні дані
| Parameter |
Value |
| Medium |
Air, water and inert gases |
| Operating ranges |
0...1 bar or 0...10 bar, see "Ordering Data" |
| Supply voltage |
24 VAC +15/-10%, 50/60 Hz or 18...33 VDC, max. 5 mA |
| Output |
0...+10 V, max. 1 mA (> 10 kΩ) |
| Housing |
Aluminum |
| Pressure connection |
G ¼ ”, Stainless steel 1.4305 with EPDM gasket |
| Cable connection |
1,5 m shielded cable, 3 wires |
| Protection class |
IP65, (IEC 144) |
| Action |
Proportional direct acting |
| Storage conditions |
-15 to +80 °C |
| Ambient operating conditions |
-15 to +80 °C |
| Max. allowed pressure |
200% of operating range |
| Measuring time constant |
5 ms |
| Linearity, hysteresis and repeatability |
< ± 0,5% of operating range in total |
| Temperature drift |
0,05% per K of operating range typical |
| Weight |
0,2 kg |
Варіанти замовлення
- PT-5217-7 with ordering code suffix:
- 01: 0...1 bar
- 10: 0...10 bar
- Accessories:
- EQ-6056-7000: Mounting set, incl. compression nut for 4x6 mm plastic tubing and surface mounting
- EQ-0100-7001: Compression nut for 4 x 6 mm plastic tubing; accessories for DIN rail mounting
Допуски та стандарти
- CE Conformity EMC (89/336 EEC), EN 50081-1, EN 50082-1
Текст документа
European Electronic Controls Catalogue
Catalogue Section A
Product Bulletin PT-5217
Issue Date 0998
Liquid or Air Pressure Transmitter
PT-5217
I ntroduction
The PT-5217 Pressure Transmitter accurately
measures pressure and converts the measurement
into a standard proportional 0...10 V signal. The
PT-5215 is especially adapted to measure air,
water and inert gases pressure.
The PT-5217 can also be used in pneumatic
control systems to convert pneumatic into electric PT-5217 Pressure Transmitter
standard signals.
Features and Benefits
q Low zero drift/time
q Low sensibility to ambient temperature
change
Can be used in a lot of applications, which require
q Low hysteresis accurate and stable pressure measurement
q High accuracy
q Direct mounting, 1,5 m cable included Saves installation time
q Splash proof enclosure Suitable for indoor/outdoor applications
O peration
The PT-5217 signal, provided by a new ceramic piezo-resistive chip pressure sensing element, will
proportionally increase as the pressure of the medium increases.
© 1998 Johnson Controls, Inc. A14.1
Order Nr. DS 24.127 E
2 PT-5217
O rdering data D imensions (mm)
PT-5217-7 1 ~87
Operating range SW27
01 0...1 bar
10 0...10 bar Ø40 G¼"
Accessories 1,5 m.
EQ-6056-7000 Mounting set, incl. compression nut for
4x6 mm plastic tubing and surface 16 60
mounting (see also under ”Dimensions”) 10
Compression nut for 4 x 6 mm plastic tubing
EQ-0100-7001 Accessories for DIN rail mounting
35
M ounting instructions
30
The PT-5217 is suitable for direct mounting on a
Mounting holes Ø5,4mm
G ¼ ” female connection. An EPDM O-Ring is 67,5
provided for tight connection (air application).
and surface mounting bracket EQ-6056-7000
40
~ 36
O-ring
Use accessories EQ-6056-7000 and/or EQ-0100-
7001 for surface or DIN rail mounting
W iring diagram Compression nut for 4 x 6 mm plastic tubing and
surface mounting bracket EQ-6056-7000
Brown: Supply, 24 VAC or 18...33 VDC
P Green: 0...10 V Output
E
DIN-rail mountingplate
White: Common for supply and output with screws
1,5 m. shielded cable
EQ-0100-7001
S pecifications
Medium Air, water and inert gases
Operating ranges 0...1 bar or 0...10 bar, see ”Ordering Data”
Supply voltage 24 VAC +15/-10%, 50/60 Hz or 18...33 VDC, max. 5 mA
Output 0...+10 V, max. 1 mA (> 10 kΩ)
Housing Aluminum
Pressure connection G ¼ ”, Stainless steel 1.4305 with EPDM gasket
Cable connection 1,5 m shielded cable, 3 wires
Protection class IP65, (IEC 144)
Action Proportional direct acting
Storage conditions -15 to +80 °C
Ambient Operating conditions -15 to +80 °C
Max. allowed Pressure 200% of operating range
Measuring time constant 5 ms.
Linearity, Hysteresis and
Repeatability < ± 0,5% of operating range in total
Temperature drift 0,05% per K of operating range typical
Weight 0,2 kg
CE Conformity EMC (89 / 336 EEC), EN 50081-1, EN 50082-1
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Johnson Controls International, Inc.
Headquarters: Milwaukee, WI, USA
European headquarters: Westendhof 8, 45143 Essen, Germany
European Factories: Lomagna (Italy), Leeuwarden (The Netherlands), Essen (Germany)
Branch Offices: principal European Cities Printed in Germany
A14.1 ©1998 Johnson Controls, Inc.
Order Nr. DS 24.127 E
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.
