| Вид документа | Технічний паспорт |
|---|---|
| Виробник | JCI |
| Моделі | M9108-GDx-1N1, M9116-GDx-1N1, M9124-GDx-1N1, M91xx-GDA-1N1, M91xx-GDC-1N1 |
| Група обладнання | automation |
| Мова документа | англійська |
| Розмір файлу | 0.2 МБ |
Про документ
Electric modulating damper actuator for operating air dampers in ventilation and air conditioning systems. Compact design with universal adapter and limitation of rotation angle; available in three torque sizes (8, 16, 24 Nm), optionally with two adjustable auxiliary switches (-GDC versions).
Ключові дані
| Supply voltage | AC 230 V |
|---|---|
| Torque | 8 Nm / 16 Nm / 24 Nm (by model) |
| Control signal | 0(4)...20 mA |
| Position signal | DC 0...10 V |
| Angle of rotation | 90° (93° mech.) |
| Degree of protection | IP 54 |
| Operating temperature | –20...+50 °C |
| Weight | 1.2 Kg |
Застосування
- Operation of air dampers in ventilation and air conditioning systems
Особливості
- 0(4)...20 mA control signal
- Up to 5 actuators in parallel operation possible
- Plug-in terminal block connection
- Simple direct-mount with universal adapter on 10...20 mm Ø round axis or 10...16 mm square shaft, 48 mm minimum damper shaft length
- Selectable direction of rotation
- Limitation of rotation angle
- Manual release button
- 2 adjustable auxiliary switches
- Automatic shut-off at end position (overload switch)
- Actuators available with 1 m cable
- Customized versions available
- Devices meet CE requirements
Технічні дані
| Parameter | Value |
|---|---|
| Actuator models | M9108-GDx-1N1 / M9116-GDx-1N1 / M9124-GDx-1N1 |
| Torque | 8 Nm / 16 Nm / 24 Nm |
| Damper area* | 1.5 m² / 3.0 m² / 4.5 m² |
| Running time OPEN | 30 s / 80 s / 125 s |
| Running time CLOSE | 30 s / 80 s / 125 s |
| Supply voltage | AC 230 V |
| Frequency | 50–60 Hz |
| Power consumption – running | 5.5 W |
| Power consumption – at end position | 0.6 W |
| Dimensioning | 6.0 VA / 0.1 A @ 2 ms |
| Control signal Y1 | 0(4)...20 mA |
| Input resistance Y1 Ri | 100 Ω |
| Position signal U | DC 0...10 V |
| Load resistance | > 50 kΩ |
| Angle of rotation / working range | 90° (93° mech.) |
| Angle of rotation / limitation | 5°...85° in 5° steps |
| Auxiliary switches | 3(1.5) A, AC 230 V |
| Auxiliary switch S1 setting range | 5°...85° adjustable |
| Cable | 1.0 m halogen-free |
| Motor wiring | 6-wire 1-2-3-4-5-6 |
| Switches wiring | 5-wire 21-22-23-24-25 |
| Life time | 60.000 rotations |
| Noise level | 45 dB (A) |
| Protection class | II |
| Degree of protection | IP 54 |
| Mode of action | Type 1 |
| Operating temperature | –20...+50 °C (IEC 721-3-3) |
| Storage temperature | –30...+60 °C (IEC 721-3-2) |
| Humidity | 5...95% r.F. no condensed |
| Weight | 1.2 Kg |
| Service | Maintenance-free |
*Caution: Please note damper manufacturer's information concerning the open/close torque.
Варіанти замовлення
| Code | Description |
|---|---|
| M91xx-GDA-1N1 | AC 230 V |
| M91xx-GDC-1N1 | AC 230 V, with 2 auxiliary switches |
Accessories: M9000-ZK damper linkage selection; M9000-ZKG ball joints.
Допуски та стандарти
- Mechanics: EN 60 529 / EN 60 730-2-14
- Electronics: EN 60 730-2-14
- EMC emissions: EN 50 081-1:92 / IEC 61000-6-3:96
- EMC immunity: EN 50 082-2:95 / IEC 61000-6-2:99
Текст документа
S T A N D A R D
2.29
M91xx-GDx-1N1
Modulating Actuators AC 230 V
Application
The JOHNSON CONTROLS STANDARD
electric damper actuator series is designed
to operate air dampers in ventilation and air
conditioning systems.
The compact design and universal adapter
fitted with limitation of rotation angle make
this JOHNSON CONTROLS actuator
highly versatile.
Features
■ 0(4)...20 mA control signal
■ Up to 5 actuators in parallel operation possible
■ Plug-in terminal block connection
■ Simple direct-mount with universal adapter
on 10...20 mm Ø round-axis
or 10...16 mm square shaft
48 mm minimum damper shaft lenght
■ Selectable direction of rotation
■ Limitation of rotation angle
■ Manual release button
■ 2 adjustable auxiliary switches Technical Specifications
■ Automatic shut-off at end position
Actuator M9108-GDx-1N1 M9116-GDx-1N1 M9124-GDx-1N1
(overload switch)
■ Actuators available with 1 m cable Torque 8 Nm 16 Nm 24 Nm
■ Customized versions available Damper area* 1.5 m2 3.0 m2 4.5 m2
■ Devices meet CE requirements Running Time OPEN 30 s 80 s 125 s
Running Time CLOSE 30 s 80 s 125 s
Accessories Supply Voltage AC 230 V
■ M9000- ZK Damper linkage selection
Frequency 50-60 Hz
■ M9000- ZKG Ball joints
Power Consumption
- Running 5.5 W
- At end position 0.6 W
Dimensioning 6.0 VA / 0.1 A @ 2 ms
Control Signal Y1 0(4)...20 mA
Imput resistance Y1 Ri 100 Ω
Position signal U DC 0...10 V
Load resistance > 50 kΩ
Angle of rotation/
90° (93°mech.)
Working range
Angle of rotation/
5°...85° in 5° < steps
Limitation
Auxiliary Switches 3(1.5) A, AC 230 V
- S1 setting range
5°...85° < adjustable
- S2 setting range
Cable 1.0 m halogen-free
- Motor 6-Wire 1-2-3-4-5-6
- Switches 5-Wire 21-22-23-24-25
Life time 60.000 rotations
Noise level 45 dB (A)
Protection Class II
Degree of Protection IP 54
Mode of Action Type 1
Ambient conditions
- Operating temperature –20...+50 °C / IEC 721-3-3
- Storage temperature –30...+60°C / IEC 721-3-2
- Humidity 5...95% r.F. no condensed
PB_M91xx-GDx-1N1_03 2008
Weight 1.2 Kg
Service Maintenance-free
Standards
Ordering Codes - Mechanics EN 60 529 / EN 60 730-2-14
Codes Descriptions - Electronics EN 60 730-2-14
M91xx-GDA-1N1 AC 230 V - EMC Emissions EN 50 081-1:92 / IEC 61000-6-3:96
M91xx-GDC-1N1 AC 230 V, with 2 auxiliary switches - EMC Immunity EN 50 082-2:95 / IEC 61000-6-2:99
*Caution: Please note damper manufacturer’s information concerning the open/close torque.
- Page 1 -
This document is subject to change without notice.
S T A N D A R D
2.29
M91xx-GDx-1N1
Modulating Actuators AC 230 V
Wiring Diagram Dimensions in mm
Parallel Connections
Setting the control Signal Changing the direction of rotation
Control signal Y1 0(4)...20 mA Microswitch d Microswitch c
Input resistance Ri 100 kΩ 0...20 mA
Position signal U DC 0...2...10 V
Load resistance > 50 kΩ
4...20 mA
Switching microswitch d1
to the ON position,
will change the control
signal to 4...20 mA.
Auxiliary Switches (S)
Setting the auxiliary switches
Factory setting
Switch a at 10°
Switch b at 80°
The switching position
can be manually changed
to any required position
by turning the ratchet
Limitation of rotation Angle Adapter release
Angle of rotation
PB_M91xx-GDx-1N1_03 2008
The limitation or rotation angle can be set in 5°
steps by moving the adapter.
The adapter can be removed simply
by pressing the adapter clip on the underside
of the actuator.
- Page 2 -
This document is subject to change without notice.
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.