| Вид документа | Технічний паспорт |
|---|---|
| Виробник | JCI |
| Моделі | FA-2000, FA-22, FA-25, FA-23, FA-26, FA-24, FA-27 |
| Група обладнання | valves |
| Мова документа | англійська |
| Розмір файлу | 0.4 МБ |
Про документ
The FA-2000 series electric valve actuators provide fully variable valve aperture with a power failure spring return safety mechanism and electrically operated manual override. They are available for 3-point control or with an electronic positioner for 0…10 V or 0…20 mA control. Models differ in stroke and "failsafe" direction (stem extends = down, or retracts = up).
Ключові дані
| stroke | 25 mm (FA-22/FA-25) / 42 mm (FA-23/FA-26) / 13 mm (FA-24/FA-27) |
|---|---|
| nominal thrust | 2.4 kN / 2.2 kN min / 2 kN min |
| control signal | 3-point or 0…10 V / 0…20 mA positioner |
| voltage supply | 230 V 50 Hz (+10 %/-10 %) or 24 V 50 Hz (+10 %/-15 %); 60 Hz on request |
| power consumption | motor 24 V = 6.1 VA; 230 V = 5 VA; solenoid 15 VA / with positioner 4 VA |
| running speed | 17.5 mm/min (86 s at 25 mm / 144 s at 42 mm / 45 s at 13 mm) |
| emergency shut-off speed | ≤ 8 s / ≤ 20 s / ≤ 5 s |
| enclosure protection | IP 54 |
Застосування
- Parallel operation of 3-point actuators (via isolation relays)
- Sequencing of up to 5 actuators from one controller output using positioners (adjustable starting point 0…8 V, end point 2…10 V, minimum span 20 %)
- Reversible actuator without positioner for floating controller
- Sequencing two actuators without positioner using limit switches
- Parallel operation of actuators without positioner with synchronous motor, condenser and limit switches
- Use with VG8000, VBB and VBD series flanged valves
Особливості
- Power failure safety mechanism (spring return) — fast valve close-off or opening after power failure
- Visible calibration ring on stem coupling for easy close-off force setting
- Models for 3-point and proportional 0…10 V or 0…20 mA control
- Positioner with adjustable starting point, span and direct/reverse action
- Active 0…10 V feedback on proportional models for independent position monitoring
- Electrically operated manual override (2 spring loaded push buttons, power must be on)
- Quick-fit coupling clamp for flanged valves with slotted stem
- Optional auxiliary switches and feedback potentiometers
Технічні дані
| Parameter | Value |
|---|---|
| Actuator model pairs | FA-22 / FA-25 (25 mm stroke), FA-23 / FA-26 (42 mm stroke), FA-24 / FA-27 (13 mm stroke) |
| Failsafe direction | FA-22, FA-23, FA-24: stem extends; FA-25, FA-26, FA-27: stem retracts |
| Associated valve series | VBB PN 16/PN 25 DN 50…65 (FA-22/25), DN 80…150 (FA-23/26); VBD PN 25 DN 50…65 (FA-22/25), DN 80…150 (FA-23/26), DN 25…40 (FA-24/27); VG8000 PN 16 DN 50…80 (FA-22/25), DN 100…150 (FA-23/26), VG8000N PN 16 DN 25…40 (FA-24/27) |
| Type of motor | Synchronous reversible |
| Action / control | 3-point; proportional with built-in 0…10 V or 0…20 mA electronic positioner (input impedance 10 kΩ) |
| Voltage supply | 230 V +10 %/-10 % 50 Hz (230 V +10 %/-15 % 50 Hz for FA-23/26) or 24 V +10 %/-15 % 50 Hz (60 Hz on request) |
| Power consumption (motor) | 24 V = 6.1 VA; 230 V = 5 VA |
| Power consumption (solenoid) | 15 VA / with positioner 4 VA |
| Nominal thrust | 2.4 kN-100 (FA-22/25); 2.2 kN min (FA-23/26); 2 kN min (FA-24/27) |
| Nominal stroke | 25 mm (FA-22/25); 42 mm (FA-23/26); 13 mm (FA-24/27) |
| Nominal running speed | 17.5 mm/min; 86 s at 25 mm stroke / 144 s at 42 mm stroke / 45 s at 13 mm stroke |
| Emergency shut-off speed | ≤ 8 s (FA-22/25); ≤ 20 s (FA-23/26); ≤ 5 s (FA-24/27) |
| Manual operation | 2 spring loaded buttons (power must be on) |
| Motor stop | 2 limit switches - 250 VAC max. 10 A |
| Enclosure protection | IP 54 |
| Electrical connection | Terminal strip via 4 PG 11 screw fittings |
| Operation rating (as per VDE 0530) | Control function, 100 % continuous rating |
| Stem material | Stainless steel (DIN W-No. 1.4305) |
| Cover material | Synthetic, ABS |
| Required clearance for cover removal | 100 mm / With positioner 150 mm |
| Operating and storage conditions | -20…+60 °C; R.H. 10…90 %, non condensing |
| Net weight | 9.4 kg (FA-22/25); 9.8 kg (FA-23/26); 9.3 kg (FA-24/27) |
Варіанти замовлення
Ordering code structure:
- FA-22/FA-25:
FA-2 - 751— voltage supply type: 1 = 230 V 50 Hz, 6 = 24 V 50 Hz; factory fitted accessories: 00 none, 01 (2) auxiliary switches, 02 2 kΩ feedback pot., 03 (2) auxiliary switches and 2 kΩ feedback pot., 04 135 Ω feedback pot., 40 built-in electronic positioner 0…10 V / 0(4)…20 mA*, 41 built-in positioner 0…10 V / 0…20 mA plus (2) auxiliary switches; spring return function: 2 = failsafe stem fully extended, 5 = failsafe stem fully retracted. - FA-23/FA-26:
FA-2 - 741— same accessory options; spring return function: 3 = stem fully extended, 6 = stem fully retracted. - FA-24/FA-27:
FA-2 -711— same accessory options; spring return function: 4 = stem fully extended – DN 25…40, 7 = stem fully retracted – DN 25…40.
*Not for 230 V model; 4…20 mA factory setting must be stated when ordering (special order). Otherwise mA settings are adjustable in situ.
Factory-fitted combination: add "+M" to the actuator ordering code.
Accessory kits for in-situ installation:
- EQ-1008-7101 — (2) limit switches / remote position indicator assembly (not available for 0…10 V models)
- FA-22/25: EQ-1009-7101 ((1) 2 kΩ pot.), EQ-1029-7101 ((1) 135 Ω pot.), EQ-1010-7101* ((1) 2 kΩ pot.), EQ-1030-7101* ((1) 135 Ω pot.)
- FA-23/26: EQ-1016-7101 ((1) 2 kΩ pot.), EQ-1017-7101 ((1) 135 Ω pot.), EQ-1018-7101* ((1) 2 kΩ pot.), EQ-1019-7101* ((1) 135 Ω pot.)
- FA-24/27: same as FA-22/25 list (EQ-1009, EQ-1029, EQ-1010, EQ-1030)
- EQ-1007-7101 — replacement PCB (*for models with remote position indicator assembly fitted as standard)
Example: Item 1 VG82G1S1N (valve body), Item 2 FA-2241-7512 (actuator); or FA-2241-7512+M for factory fitted combination.
Допуски та стандарти
- EMC (89/336 EEC)
- LVD (73/23/EEC)
- IP 54 enclosure protection
Текст документа
European Electronic Controls Catalogue
Section E
Product Bulletin FA-2000
Issue Date 0701
FA-2000
Spring Return Valve Actuator
I ntroduction
The FA-2000 series electric actuators are
available for 3-point control or with electronic
positioner for 0…10 V or 0…20 mA control. It
provides a fully variable valve aperture, a power
failure spring return safety mechanism and an
electrically operated manual override.
Three models of the FA-2000 are available.
The FA-22 (“failsafe” position down = stem fully
extended) and FA-25 (“failsafe” position up = stem
fully retracted): this model pair has a 25 mm stroke
and a minimum of 2400 N thrust.
The FA-23 (“failsafe” position down) and FA-26
(“failsafe” position up): this model pair has a 42
mm stroke of and a minimum thrust of 2200 N.
The FA-24 (“failsafe” position down) and FA-27
(“failsafe” position up): this model pair has a stroke
of 13 mm and 2000 N minimum thrust.
The actuator can be combined with VG8000, VBB,
FA-23 (left), FA-26 (right) and
and VBD series flanged valves in accordance with
FA-25 mounted on VG8000 flanged valve
the maximum close-off pressure ratings specified.
The FA-2000, when delivered as a single unit, is
pre-set to facilitate installation with minimum
adjustment; it is also available with a variety of
options such as auxiliary switches and feedback
potentiometers.
Features and Benefits
Power failure safety mechanism (spring Fast valve close off or opening after power failure.
return).
Visible calibration ring on stem coupling. Provides easy close-off force setting.
Models for 3-point and proportional Allows optimum choice of electrical signal.
0…10 V or 0…20 mA control.
Positioner with adjustable: starting point, Provides flexibility in application. Allows easy
span and direct / reverse action. sequencing from only one controller output.
Active 0…10 V feedback on proportional Provides active signal for independent position
models. monitoring and command function.
Electrically operated manual override. Provides manual positioning of the valve.
Quick-fit coupling clamp. Provides easy mounting of the actuator on flanged
valves with slotted stem.
Optional auxiliary switches and feedback Provides potential free contacts for independent
potentiometers available. monitoring of the actuators position.
© 2001 Johnson Controls, Inc. E 13.1
Order No. 10.738 E
2 FA-2000
O rdering data for FA-22 and FA-25 A ctuator - Valve combinations
25 mm stroke, 2400 N thrust, spring return The FA-22 and FA-25 electric spring return
actuator: actuator models are to be used with the VBB,
VBD and VG8000 valve series.
FA-2 - 751
Voltage supply type The ordering data for valve bodies is as follows:
1 230V, 50 Hz z VG8000 series (PN 16 flanged valves)
6 24 V, 50 Hz
VG82 S1N 2-way PDTC DN 50…80
Factory fitted accessories
VG88 S1N 3-way mixing DN 50…80
00 None VG89 S1N 3-way diverting DN 50…80
01 (2) Auxiliary switches
02 2 kΩ feedback pot. z VBD series (PN 25 flanged valves)
03 (2) Auxiliary switches and VBD- 2-520 2-way PDTC DN 50...65
2 kΩ feedback pot. VBD- 8-520 3-way mixing DN 50...65
04 135 Ω feedback pot.
40 Built-in electronic positioner z VBB series (PN 16 and 25 pressure balanced
0…10 V / 0 (4) …20 mA * flanged valves)
41 Built-in electronic positioner VBB- 12-520 2-way PDTC (NO) DN 50...65
0…10 V / 0…20 mA and
(2) Auxiliary switches Please refer to the product bulletins “VG8000
Spring return function Series Flanged Valves”, “VBD Series Flanged
Valves” and “VBB Series Flanged Valves ” for
2 “Failsafe” position: stem complete ordering information.
fully extended
5 “Failsafe” position: stem
fully retracted FA-22 and FA-25 accessory kits for in-situ
installation
* Not for 230 V model; A requirement for a
4…20 mA factory setting must be stated when the Order No. Description Comments
order is made (special order). Otherwise the
positioner mA settings are adjustable in situ. EQ-1008-7101 (2) Limit switches -
Remote position indicator
EQ-1009-7101 assembly. fitted with Not available for
0...10V models
O rdering procedure (1) 2 kΩ potentiometer
Remote position indicator
Not available for
The actuator can be ordered as a separate unit or EQ-1029-7101 assembly fitted with
0...10V models
a factory fitted valve-actuator combination. Should (1) 135 Ω potentiometer
the latter be required, please just add “+M” to the Not available for
end of the actuator ordering code. EQ-1010-7101 * (1) 2 kΩ potentiometer
0...10V models
For example: Not available for
EQ-1030-7101 * (1) 135 Ω potentiometer
0...10V models
Item 1 VG82G1S1N (valve body) EQ-1007-7101 Replacement PCB -
Item 2 FA-2241-7512 (actuator)
* For models with remote position indicator
Alternatively, to order a factory fitted combination. assembly fitted as standard.
Item 1 VG82G1S1N (valve body) A combination of:
Item 2 FA-2241-7512+M (actuator)
EQ-1008-7101 and EQ-1009-7101
or
EQ-1008-7101 and EQ-1029-7101
is also available.
E 13.1
FA-2000 3
O rdering data FA-23 and FA-26 A ctuator - Valve combinations
42 mm stroke, 2200 N thrust, spring return The FA-23 and FA-26 electric spring return
actuator: actuator models are to be used with the VBB,
VBD and VG8000 valve series.
FA-2 - 741
Voltage supply type The ordering data for valve bodies is as follows:
1 230VAC, 50 Hz z VG8000 series (PN 16 flanged valves)
6 24 VAC, 50 Hz
VG82 S1N 2-way PDTC DN 100…150
Factory fitted accessories
VG88 S1N 3-way mixing DN 100…150
00 None VG89 S1N 3-way diverting DN 100…150
01 (2) Auxiliary switches
02 2 kΩ feedback pot. z VBD series (PN 25 flanged valves)
03 (2) Auxiliary switches and VBD- 4-520 2-way PDTC (NO) DN 80…150
2 kΩ feedback pot. VBD- 8-520 3-way mixing DN 80…150
04 135 Ω feedback pot.
40 Built-in electronic positioner z VBB series (PN 16 and 25 pressure balanced
0…10 V / 0 (4) …20 mA * flanged valves)
41 Built-in electronic positioner VBB-4 12-520 2-way PDTC (NO) DN 80…150
0…10 V / 0…20 mA and
(2) Auxiliary switches Please refer to the product bulletins “VG8000
Series Flanged Valves”, “VBD Series Flanged
Spring return function Valves” and “VBB Series Flanged Valves ” for
3 “Failsafe” position: stem complete ordering information.
fully extended
6 “Failsafe” position: stem
fully retracted FA-23 and FA-26 accessory kits for in-situ
installation
* Not for 230 V model; A requirement for a
4…20 mA factory setting must be stated when the Order No. Description Comments
order is made (special order). Otherwise the
positioner mA settings are adjustable in situ. EQ-1008-7101 (2) Limit switches -
Remote position indicator
Not available for
EQ-1016-7101 assembly. fitted with
0...10V models
(1) 2 kΩ potentiometer
O rdering procedure Remote position indicator
Not available for
The actuator can be ordered as a separate unit or EQ-1017-7101 assembly fitted with
0...10V models
a factory fitted valve-actuator combination. Should (1) 135 Ω potentiometer
the latter be required, please just add “+M” to the Not available for
EQ-1018-7101 * (1) 2 kΩ potentiometer
end of the actuator ordering code. 0...10V models
Not available for
For example: EQ-1019-7101 * (1) 135 Ω potentiometer
0...10V models
Item 1 VG82J1S1N (valve body) EQ-1007-7101 Replacement PCB -
Item 2 FA-2341-7412 (actuator)
* For models with remote position indicator
Alternatively, to order a factory fitted combination.
assembly fitted as standard.
Item 1 VG82J1S1N (valve body)
A combination of:
Item 2 FA-2341-7412+M (actuator)
EQ-1008-7101 and EQ-1016-7101
or
EQ-1008-7101 and EQ-1017-7101
is also available.
E 13.1
4 FA-2000
O rdering data FA-24 and FA-27 A ctuator - Valve combinations
13 mm stroke, 2000 N thrust, spring return The FA-24 and FA-27 electric spring return
actuator: actuator models are to be used with the VBD and
VG8000N valve series.
FA-2 -7 11
z VG8000N series (PN 16 flanged valves)
Voltage supply type
1 230V, 50 Hz VG8 S1N 2-way PDTC DN 25…40
6 24 V, 50 Hz VG8 S1N 3-way mixing DN 25…40
Factory fitted accessories VG8 S1N 3-way diverting DN 25…40
00 None
z VBD series (PN 25 flanged valves)
01 (2) Auxiliary switches
02 2 kΩ feedback pot. VBD- 4-520 2-way PDTC DN 25…40
03 (2) Auxiliary switches and VBD- 8-520 3-way mixing DN 25…40
2 kΩ feedback pot.
04 135 Ω feedback pot.
Please refer to the product bulletins “VG8000
40 Built-in electronic positioner Series Flanged Valves” and “VBD Series Flanged
0…10 V / 0 (4) …20 mA * Valves”.
41 Built-in electronic positioner
0…10 V / 0…20 mA and
(2) Auxiliary switches FA-24 and FA-27 accessory kits for in-situ
Spring return function installation
4 “Failsafe” position: stem Order No. Description Comments
fully extended – DN 25…40
7 “Failsafe” position: stem EQ-1008-7101 (2) Limit switches -
fully retracted – DN 25…40 Remote position indicator
Not available for
EQ-1009-7101 assembly. fitted with
* Not for 230 V model; A requirement for a 0...10V models
(1) 2 kΩ potentiometer
4…20 mA factory setting must be stated when the
order is made (special order). Otherwise the Remote position indicator
Not available for
positioner mA settings are adjustable in situ. EQ-1029-7101 assembly fitted with
0...10V models
(1) 135 Ω potentiometer
Not available for
EQ-1010-7101 * (1) 2 kΩ potentiometer
0...10V models
O rdering procedure EQ-1030-7101 * (1) 135 Ω potentiometer
Not available for
0...10V models
The actuator can be ordered as a separate unit or EQ-1007-7101 Replacement PCB -
a factory fitted valve-actuator combination. Should
the latter be required, please just add “+M” to the * For models with remote position indicator
end of the actuator ordering code. assembly fitted as standard.
For example: A combination of:
Item 1 VG82E2S1N (valve body) EQ-1008-7101 and EQ-1009-7101
Item 2 FA-2441-7116 (actuator)
or
Alternatively, to order a factory fitted combination.
EQ-1008-7101 and EQ-1029-7101
Item 1 VG82E2S1N (valve body)
Item 2 FA-2441-7116+M (actuator) is also available.
E 13.1
FA-2000 5
O peration M ounting instructions
3-point models When mounting the actuator on a valve, please
follow the instructions below:
Connections Actuator stem
1-2 extends • It is recommended that the valves be mounted
1-3 retracts within 90° of the upright position, in an easily
accessible location. When mounting in an
Proportional models inclined to horizontal position, the yoke should
Input control be fitted such that the stanchions are aligned
Action plug Actuator stem vertically one above the other.
signal
increases retracts
Direct action
decreases extends
Reverse increases extends
action decreases retracts
Power failure:
FA-22: Stem extends 90° Max
FA-25: Stem retracts
FA-23:
FA-26:
Stem extends
Stem retracts
OK
FA-24: Stem extends
FA-27: Stem retracts
WARNING
“Failsafe”
• The actuator must be protected against
In a power failure situation the actuator stem dripping water, which could enter the housing
extends / retracts and damage the mechanism or motor.
Safety function • Do not cover with insulating material.
When the safety function is activated, spring force • Sufficient clearance must be allowed for
opens or closes the valve depending on the actuator removal (refer to the dimension
actuator “failsafe” mode. Further information can drawings).
be found in the service and data information
provided as actuator by-pack: • The valve must be installed so that the plug
seats against the flow as indicated by the
SDI No. 111 6064 010 for FA-22 and FA-25 arrow(s) on the valve.
SDI No. 111 6189 010 for FA-23 and FA-26
SDI No. 111 6095 010 for FA-24 and FA-27
E 13.1
6 FA-2000
C lose-off pressures
Maximum Close-off pressures (kPa) for FA-2000 actuator / valve combinations
FA-22 and FA-25 FA-23 and FA-26 FA-24 and FA-27
Body Size (DN) Close-off Body Size (DN) Close-off Body Size (DN) Close-off
Valve series
Two-way Mixing pressures Two-way Mixing pressures Two-way Mixing pressures
50 1030 100 190 25 1600
VG8000, PN 16 65 790 125 110 40 1600
80 370 150 50 -
- - 80 220 25 2500
50 810 100 110 40 1400
VBD, PN 25
65 410 125 50 25 2500
- - 150 20 40 1050
- - 80 -
50 1600 100 -
VBB, PN 16 1600 -
65 1600 125 -
- - 150 -
- - 80 -
50 2000 100 -
VBB, PN 25 2000 -
65 2000 125 -
- - 150 -
E 13.1
FA-2000 7
W iring instructions WARNING
Shock Hazard
• All wiring must be in accordance with local
regulations and national electrical codes and Disconnect the power supply before wiring
should be carried out by authorised personnel connections are made to prevent personal injury.
only.
Equipment Damage Hazard
• Make sure that the line power supply is in
accordance with the power supply specified on Make and check all wiring connections before
the device. applying power to the system. Short circuited or
improperly connected wires may result in
Wiring diagrams permanent damage to the unit.
3-point models
FA-2x0x-7x1x
S1 S2
M
S3 S4 R
I 2
M P
1
1 18 2 3 17 16 4 6 5 7 9 8 10 11 12
M M
2
Max 2.5 mm
L
N { FA-2x0x-7x11: 230 V
FA-2x0x-7x16: 24 V
Proportional models
R
FA-2x4x-7x12
S1 S2
Electronic positioner
M
1 2 3 16 17 54………61 10 11 12
,
M
S3 S4
1 18 54 56 57 58 59 60 61 4 6 5 7 9 8
+ - - +
2
0…10 V Input 0…20 mA Input Max 2.5 mm
L 0…10 V Output
N { FA-2x4x-7x11: 230 V
FA-2x4x-7x16: 24 V
E 13.1
8 FA-2000
A djustments Slope adjustment:
• Direct Action:
WARNING
At the maximum input signal, adjust the 0%
Shock Hazard position with “potentiometer A”.
Great care must be taken when the cover is At the minimum input signal, adjust the 100%
removed (by authorised personnel only) for position with “potentiometer B”.
adjustment or inspection.
M
In all other cases when the cover is removed the
power must be switched off. 0% 2…10 V Maximum input signal
Adjust with “pot. A”.
Do not touch or attempt to connect or disconnect
wires when the electrical power is on.
50%
100% 0…8 V Minimum input signal
Actuators with 0…10 V or 0…20 mA Adjust with “pot. B”.
positioner (example below with 0…10 V)
Situated on electronics pcb
• Reverse Action
At the minimum input signal, adjust the 0%
Pot. B position with “potentiometer A”.
Pot. A At the maximum input signal, adjust the 100%
position with “potentiometer B”.
M
ST1
0% 0…8 V Minimum input signal
Adjust with “pot. A”.
Selecting positioner action: 50%
The action can be selected by disconnecting the
action plug “ST1”, turning it 180 degrees and 100% 2…10 V Maximum input signal
reconnecting it, as in the following illustration: Adjust with “pot. B”.
Note:
The maximum input signal must always exceed
Direct Action
the minimum input signal by at least 2 Volts.
ST1
Reverse Action
ST1
E 13.1
FA-2000 9
A pplications Reversible actuator without positioner,
for floating controller.
Parallel operation of 3-point actuators.
Sequencing two actuators without
CAUTION positioner using limit switches.
Parallel connection is only possible using isolation
relays. If the parallel running motors do not have
separately switched power supplies one or more
motors will start to cycle at the end of travel.
Controller
The controller output 0…10 V can operate several
actuators with electronic positioner for 0…10 V or
U∼
0…20 mA control. The electrical wiring for parallel
and sequenced operation is identical. The
sequencing and action of the actuator can be 1 16 2 3 17 1 16 2 3 17
adjusted individually on each positioner. Each
positioner has its own adjustment for starting point
between 0…8 V and end point between 2…10 V.
Using the minimum adjustable span of 20 %
therefore enables a maximum of 5 sequenced M M
devices. Further sequencing can be accomplished
by using additional controller outputs. Each
positioner can be set for direct or reverse action.
Parallel operation of actuators without
Adjustments for Y1, Y2 and Y3 (example): positioner with synchronous motor,
M
condenser and limit switches:
0% Although synchronous motors have the same
running speed, deviation in travel between motors
Y1 Y2 Y3
can accumulate because of varying load during
50% start-stop operation. This deviation depends on the
number of on/off cycles and is about 0.5 % per
100 cycles. Periodically switching the actuators to
100%
end of travel (e.g. normal position) will improve the
synchronous running of the motors.
Input signal
E 13.1
10 FA-2000
D imensions (in mm)
FA-22 FA-25
150 150
100 100
Two spring loaded
push buttons for
manual operation
(power must be on)
541 / With positioner 586 541 / With positioner 586
162 162
∅ 120 ∅ 120
∅ 54 ∅ 54
∅ 120
∅ 120
E 13.1
FA-2000 11
D imensions (in mm)
FA-23 FA-26
150 150
100 100
Two spring loaded
push buttons for
manual operation
(power must be on)
575 / With positioner 612
162
575 / With positioner 612
162
∅ 120 ∅ 120
∅ 54
∅ 54
∅ 120
∅ 120
E 13.1
12 FA-2000
D imensions (in mm)
FA-24 FA-27
150 150
100 100
Two spring loaded
push buttons for
manual operation
(power must be on)
511 / With positioner 548 511 / With positioner 548
162 162
∅ 120 ∅ 120
∅ 54 ∅ 54
∅ 120 ∅ 120
E 13.1
FA-2000 13
N otes
E 13.1
14 FA-2000
S pecifications
Actuator Models: FA-22 and FA-25 FA-23 and FA-26 FA-24 and FA-27
Associated valve series:
VBB PN 16, PN25: DN 50…65 PN 16, PN25: DN 80…150
VBD PN 25: DN 50…65 PN 25: DN 80…150 PN 25: DN25…40
VG8000 PN 16: DN 50…80 PN 16: DN 100…150 PN 25: DN25…40
Type of motor: Synchronous reversible
• 3-point
Action / control:
• Proportional with built-in 0…10 V or 0...20 mA electronic positioner (input impedance 10 kΩ)
230 V +10% / -10% 50 Hz
Voltage supply and 230 V +10% / -15% 50 Hz 230 V +10% / -10% 50 Hz
24 V +10% / -15% 50 Hz
frequency: 24 V +10% / -15% 50 Hz 24 V +10% / -15% 50 Hz
(60 Hz on request)
Motor: 24 V = 6.1 VA
Power consumption: 230 V = 5 VA
Solenoid: 15 VA / with positioner 4 VA
Nominal Thrust: 2.4 kN-100 2.2 kN min 2 kN min
Nominal stroke: 25 mm 42 mm 13 mm
17.5 mm / min 17.5 mm / min 17.5 mm / min
Nominal running speed:
86s at 25 mm stroke 144s at 42 mm stroke 45s at 13 mm stroke
Emergency shut-off speed: ≤ 8s ≤ 20s ≤ 5s
Stem Stem Stem Stem Stem Stem
Close off direction:
extending retracting extending retracting extending retracting
Manual operation: 2 Spring loaded buttons (power must be on)
Motor stop: 2 limit switches - 250 VAC max. 10 A
Enclosure protection: IP 54
Electrical connection: Terminal strip via 4 PG 11 screw fittings
Operation (as per VDE 0530): Control function, 100% continuous rating
Materials:
Stem: Stainless steel ( material DIN W-No. 1.4305 )
Cover: Synthetic, ABS
Required clearance for
actuator cover removal: 100 mm / With positioner 150 mm
Operating and storage -20...+60 °C
conditions: R.H. 10…90 %, non condensing
Net weight: 9.4 kg 9.8 kg 9.3 kg
EMC (89 / 336 EEC)
Approvals: European Directives: LVD (73 / 23 / EEC)
The performance specifications are nominal and conform to acceptable industrial standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls Incorporated are not liable for damages resulting from
misapplication or misuse of its products.
Johnson Controls International, Inc.
Headquarters: Milwaukee, WI, USA
European headquarters: Westendhof 8, 45143 Essen, Germany
European Factories: Essen (Germany), Leeuwarden (The Netherlands), Lomagna (Italy)
Branch Offices: principal European Cities Printed in Germany
E 13.1
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.