| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | JCI |
| Моделі | DP7000-R8, DP7000-R8-01, DP7000-R8-AZ, DP7000-R8-AZ-01, DP7000-R8-D, DP7000-R8-AZ-D, DP2500-R8, DP2500-R8-01 |
| Група обладнання | pressure |
| Мова документа | англійська |
| Розмір файлу | 0.3 МБ |
Про документ
The DP low differential pressure transmitter series is an accurate and cost competitive solution for measuring low pressures of air and non-aggressive gases in order to monitor and control pressures in building automation, HVAC and clean room systems. Each device offers 8 different pressure ranges selectable within one model.
Ключові дані
| Pressure ranges | 0…1000 to 0…7000 Pa (DP7000); 0…100 to 0…2500 Pa and -100…+100 Pa (DP2500); 0…25 to 0…250 Pa and -150…+150 Pa (DP0250) |
|---|---|
| Output signal | 0…10 VDC or 4…20 mA |
| Supply voltage | 24 VAC / VDC |
| Protection class | IP54 |
| Display | 2 rows x 12 characters digit display with back-light |
| Measuring units | Pa, kPa, mbar, inch WC, mm WC, psi |
Застосування
- Building automation
- HVAC systems
- Clean room systems
Особливості
- Power supply 24 VAC/VDC
- Pressure range: 8 different ranges in one device
- Output signal: 0...10 VDC or 4...20 mA
- Automatically autozero point adjusting
- Response time selectable
- 2 rows x 12 characters digit display
- Back-light display
- Protection class: IP54
- Configurable measuring unit (Pa, kPa, mbar, inch WC, mm WC, psi)
- Factory Calibration Certificate available on request
Технічні дані
| Parameter | Value |
|---|---|
| Supply voltage | 24 VAC / VDC |
| Output signal | 0…10 VDC or 4…20 mA |
| Protection class | IP54 |
| Display | 2 rows x 12 characters digit display, back-light |
| Configurable measuring unit | Pa, kPa, mbar, inch WC, mm WC, psi |
| Autozero | Automatic autozero point adjusting (option -AZ) |
| Display option | Option -D |
| Enclosure | IP54 |
Варіанти замовлення
Ordering codes combine range family, packaging, autozero (-AZ), display (-D) options:
| Ordering code | Packaging | Range (Pa) | Options |
|---|---|---|---|
| DP7000-R8 | Single | 0…1000 / 0…1500 / 0…2000 / 0…2500 / 0…3000 / 0…4000 / 0…5000 / 0…7000 | --- |
| DP7000-R8-01 | Bulk | same ranges | --- |
| DP7000-R8-AZ | Single | same ranges | Autozero |
| DP7000-R8-AZ-01 | Bulk | same ranges | Autozero |
| DP7000-R8-D | Single | same ranges | Display |
| DP7000-R8-AZ-D | Single | same ranges | Autozero + Display |
| DP2500-R8 | Single | -100…+100 / 0…100 / 0…250 / 0…500 / 0…1000 / 0…1500 / 0…2000 / 0…2500 | --- |
| DP2500-R8-01 | Bulk | same ranges | --- |
| DP2500-R8-AZ | Single | same ranges | Autozero |
| DP2500-R8-AZ-01 | Bulk | same ranges | Autozero |
| DP2500-R8-D | Single | same ranges | Display |
| DP2500-R8-AZ-D | Single | same ranges | Autozero + Display |
| DP0250-R8-AZ | Single | 0…25 / 0…50 / 0…100 / 0…250 / -25…+25 / -50…+50 / -100…+100 / -150…+150 | Autozero |
| DP0250-R8-AZ-01 | Bulk | same ranges | Autozero |
| DP0250-R8-AZ-D | Single | same ranges | Autozero + Display |
| DP0250-R8-AZS | Single | same ranges | Autozero |
| DP0250-R8-AZ-DS | Single | same ranges | Autozero + Display |
Accessory kit:
| Code | Description |
|---|---|
| T00199 | DP Transmitter accessory kit, 2 fixing screws, 2 plastic tube connectors and 2 m tube ∅ 4/7 mm |
Factory calibration certificate ordering: select C1–C8 per model —
- DP7000: C1 0…1000 Pa, C2 0…1500 Pa, C3 0…2000 Pa, C4 0…2500 Pa, C5 0…3000 Pa, C6 0…4000 Pa, C7 0…5000 Pa, C8 0…7000 Pa
- DP2500: C1 -100…+100 Pa, C2 0…100 Pa, C3 0…250 Pa, C4 0…500 Pa, C5 0…1000 Pa, C6 0…1500 Pa, C7 0…2000 Pa, C8 0…2500 Pa
- DP0250: C1 0…25 Pa, C2 0…50 Pa, C3 0…100 Pa, C4 0…250 Pa, C5 -25…+25 Pa, C6 -50…+50 Pa, C7 -100…+100 Pa, C8 -150…+150 Pa
Add -D (Display), -AZ (Autozero) or -AZ-D (Autozero and Display). Examples: DP0250-C3-AZ; DP2500-C3-AZ-D; DP7000-C3.
Допуски та стандарти
- Factory Calibration Certificate available on request: reports date and validity, device type and calibration range, device ID, test report on 3 measurement points.
Позиції каталогу з цим документом
Текст документа
Virtual Branch eCatalogue
click here
HVAC control products
Sensors
Differential pressure
DP7000 - DP2500 - DP0250
The DP low differential pressure transmitter series is an accurate
and cost competitive solution for measuring low pressures
of air and non-aggressive gases in order to monitor and control
pressures in building automation, HVAC and clean room systems.
Features
ffPower supply 24 VAC/VDC
ffPressure range: 8 different ranges in one device (see the table)
ffOutput signal: 0...10 VDC or 4...20 mA 90.0 36.0
ffAutomatically autozero point adjusting
ffResponse time selectable
ff2 rows x 12 characters digit display 95.0
ffBack-light display 71.5
ffProtection class: IP54
ffConfigurable measuring unit (Pa, kPa, mbar, inch WC, mm WC, psi)
ffFactory Calibration Certificate available on request
Ordering information Dimensions in mm
Operating Auto Output Supply Span point
Ordering Codes Packaging range (Pa) zero Display signal Enclosure voltage adjustment
DP7000-R8 Single
0...1000 ---
DP7000-R8-01 Bulk 0...1500
0...2000 ---
DP7000-R8-AZ Single 0...2500
0...3000
DP7000-R8-AZ-01 Bulk
0...4000
DP7000-R8-D Single 0...5000 ---
0...7000
DP7000-R8-AZ-D Single
DP2500-R8 Single
-100...+100 ---
DP2500-R8-01 Bulk 0...100 ---
0...250 --- 0...10 VDC
DP2500-R8-AZ Single 0...500 or IP54 24 VAC / VDC
0...1000 4...20 mA
DP2500-R8-AZ-01 Bulk
0...1500
DP2500-R8-D 0...2000 ---
0...2500
DP2500-R8-AZ-D Single
DP0250-R8-AZ 0...25 ---
0...50
DP0250-R8-AZ-01 Bulk 0...100
DP0250-R8-AZ-D 0...250 ---
-25...+25
DP0250-R8-AZS Single -50...+50
-100...+100
DP0250-R8-AZ-DS -150...+150 ---
Accessory kit
Code Description
T00199 DP Transmitter accessory kit, 2 fixing screws, 2 plastic tube connectors and 2 m tube ∅ 4/7 mm
87
European product catalogue 2017
Manufacturer reserves the right to change specifications without prior notice
HVAC control products
Differential pressure
DP7000 - DP2500 - DP0250
Factory calibration certificates
On request, the DP7000, DP2500 and DP0250 transmitter can be provided
with the Factory calibration certificate for a specific pressure range setting.
The certificate will report:
yy Date and validity
yy Device type and calibration range
yy Device ID
yy Test report on 3 measurement points
The calibration test performed in the factory ensures the accuracy of the pressure readings
measured by the sensor. A calibration certificate is provided with any error measured in the
test declared. This error value can be used when configuring the analog input channel for the
sensor. Select the error at the nearest value the pressure sensors is expected to be typically
measuring, this should normally be mid-range, and use this as the offset when setting up
the analog input channel. This will ensure the sensor provides the greatest accuracy possible
at the normal operating condition.
How to order a DP with Calibration certificate
The calibration certificate performed in the factory can be provided for a specific pressure range only. To determine the ordering code
please select the Certificate required from the table below. Take into consideration that pressure range changes from one model to another.
DP7000 DP2500 DP0250
C1 0…1000 Pa -100…+100 Pa 0…25 Pa
C2 0…1500 Pa 0…100 Pa 0…50 Pa
For Display or Autozero options then add:
C3 0…2000 Pa 0…250 Pa 0…100 Pa
-D Display
C4 0…2500 Pa 0…500 Pa 0…250 Pa
- AZ Autozero Option
DPxxxx-
0…3000 Pa 0…1000 Pa -25…+25 Pa - AZ-D Autozero and Display
C5
C6 0…4000 Pa 0…1500 Pa -50…+50 Pa
C7 0…5000 Pa 0…2000 Pa -100…+100 Pa
C8 0…7000 Pa 0…2500 Pa -150…+150 Pa
Note
i.e. DP0250-C3-AZ DP0250 with autozero with Calibration certified for 0…100 Pa range setting
DP2500-C3-AZ-D DP2500 with autozero and Display with Calibration certified for 0…250 Pa range setting
DP7000-C3 DP7000 Calibration certified for 0…2000 Pa range setting
88
European product catalogue 2017
Manufacturer reserves the right to change specifications without prior notice
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.