| Вид документа | Бюлетень виробу |
|---|---|
| Виробник | JCI |
| Код документа | network-integration-engine-product-bulletin |
| Група обладнання | NIE29 Network Integration Engine |
| Сторінок | 11 |
| Мова документа | англійська |
| Розмір файлу | 1.5 МБ |
Текст документа
Network Integration Engine Product Bulletin
MS-NIE55xx-x MS-NIE8500-x Code No. LIT-1201537
Software Release 7.0.7
Issued April 2016
The Metasys® Network Integration Engine (NIE) fulfills Figure 1: NIE55 Network Integration Engine
a critical role in upgrading existing Network
Communication Modules (NCMs) by integrating older
Metasys N1 Building Automation System (BAS)
technology into the current generation of BAS technology
using the latest standards in IT and enterprise-level
communication.
The Metasys NIE is a web-enabled network controller
that uses the latest capabilities of information technology
to ensure the Metasys system easily integrates and
connects to the expanding world of web browsers and
remote operations centers.
The NIE transfers point data from one or more NCM
devices in a Metasys N1 network, providing alarm and
event management, trending, energy management,
scheduling, and data sharing capabilities in a manner
consistent with the new technology of the Metasys The network may include Network Automation Engines
system. Using a Metasys NIE to integrate existing NCMs (NAEs), Network Control Engines (NCEs), and other NIE
lets you update older facilities with fewer installation steps units communicating with single or multiple web
and less overall labor time than it would take to completely browser-based UIs using the latest security protection
replace the existing Building Management System (BMS) technology.
equipment. For information on NIEx9 models, refer to Network
Integration Engine (NIEx9) for Third-Party Integrations
Product Bulletin (LIT-12011923).
Features and Benefits
• Communication with N1 Networks Using Commonly Accepted IT Standards at the Automation and
Enterprise Levels—Allows you to install a system on your existing IT infrastructure within a building or enterprise
and integrate it with the existing N1 network using standard IT communication services over the company intranet,
wide area network, or public Internet with firewall protection.
• Web-Based User Interface—Allows you to access system data in the NIE from any supported web browser
device connected to the network, including remote users connected by dial-up telephone or an Ethernet connection.
• User Interface and Online System Configuration Software Embedded in NIE—Lets you enable, configure,
commission, archive data, monitor, command, and perform system diagnosis from any device by using a web
browser, without the need for separate workstation software.
• Site Director Function in One NIE or One NAE, or in an Application and Data Server (ADS) for Large
Installations—Allows you to access all data on one site through one device. The Site Director coordinates the
display of data from multiple NIE and NAE devices for easy navigation through the entire site.
• Site Management Portal System Configuration Software Embedded in NIE—Gives you password-protected
access to system configuration, monitoring, commanding, and diagnosis from any device with web browser
software without the need for separate workstation software.
• Scalable System Integration Solution for Integrating and Migrating Metasys N1 Networks—Integrates N1
devices in one building, a network of small buildings, or multiple N1 networks in a large building complex, providing
new technology while protecting existing investment using the scalable line of NIEs.
Network Integration Engine Product Bulletin 1
• Mapping Capability of N1 Data Types Including Analog, Binary, Multistate and Control System Objects,
and Access to Scheduling Feature—Allows you to perform all day-by-day operations for an integrated N1
network from the web-enabled Metasys Site Management Portal user interface.
• Trending, Totalization, and Alarm Functions Automatically Regenerated in the Metasys System—Protects
functionality and data recording capabilities, and fully integrates processing, presentation, and storage of N1
network data in the web-enabled system.
Flexible Networking
The NIE has multiple connection port options, enabling Application and Data Server (ADS)
you to integrate one or several Network Communication The ADS is an optional software package running on a
Module (NCM) devices that reside on an N1 network and server platform, which provides storage of the system
build an extremely flexible network at the automation and configuration database, trend logs, alarm logs, and audit
enterprise level of your system. trails.
An ADS can also be configured as the Site Director to
Web Browser Access allow more concurrent users and coordinate access to
You view and access an N1 network via the NIE with a all components on a site via a web browser connected
supported web browser on a desktop, laptop, or any other over the network, Internet, or telephone line via dial-up
type of computer platform. The computer does not require communication. Refer to the Application and Data Server
any special workstation software. The web browser (ADS) and Extended Application and Data Server (ADX)
accesses the NIE directly over the IP network, or via the Product Bulletin (LIT-1201525) for more information about
Internet or public telephone service. ADSs.
IP Ethernet Network Engineering Workstation on the N1
Network Integration Engines (NIEs) connect directly to Network
an IP Ethernet network running at 10, 100 Mbps, or 1 At least one operator workstation (OWS) should remain
Gbps. Multiple NIEs communicate with each other and on the integrated N1 network as an engineering
with NAEs over the network. You can designate one NIE, workstation for managing and archiving the N1 network
Network Automation Engine (NAE), or ADS as the Site system configuration database. You may continue to use
Director. The device is then the point of UI access to the M5 Workstation/OWS on the Metasys N1 network for
site network. operator functions as functions transfer to the NIE and
Authorized users log on to the Site Director via a the new system. When the transfer is complete, the
supported browser to access the entire Metasys system integrated N1 network can be controlled and monitored
for the site. Data transmission on the network uses via the Metasys UI.
standard IT protocols, services, and formats. The NIE
supports domain name system (DNS).
Integration Capabilities
Networks in different buildings may be interconnected The NIE55 supports the integration of one or more NCMs
using standard WAN technologies and network service on an Ethernet-based Metasys N1 network. The NIE55
providers. Transmission speed depends on the supports approximately 5,000 objects on an N1 network.
technology used. If a network has more than 5,000 objects, consider using
an NIE85, which can support up to 25,000 objects. (You
Remote NIE can also use multiple NIE55s to integrate large N1
networks or multiple N1 networks with more than 5,000
The NIE can be accessed locally by connecting a
objects.)
computer to the NIE Ethernet port or to one of the NIE
serial ports. Remote access can be set up over the Data is exchanged between NIEs, NAEs, and NCEs on
Internet using an ISP line or over the public telephone the network; displayed on web browsers; and stored in
network using a modem and Point-to-Point Protocol an ADS. These features allow your N1 network and the
(PPP). Several NIE models have an optional internal Metasys system to operate as one virtual control network.
modem; other NIE models support an external analog
modem on the NIE USB port.
Network Integration Engine Product Bulletin 2
Automation Level Communication
Each NIE shares data and has access to information on all other NIEs, NCEs, and NAEs on the IP network. The
NIEs, NCEs, and NAEs use this peer-to-peer communication to coordinate the overall functions of the building control
system at the automation level.
Figure 2: Metasys N1 Networks
Metasys N1 Network
Communication Integrating N1 Data
The Metasys N1 Integration solution provides online and
The NIE communicates over the IP Ethernet network with offline options for generating a table of N1 point objects.
the NCM devices on the N1 network. The NIE is These N1 point objects are mapped to the NIE and
configured as a Metasys N1 node and stores N1 network displayed in the system navigation tree on the Site
global data, including a list of NCM devices and system Management Portal user interface. The following N1
names. object types can be mapped to the Metasys system
The NIE continuously monitors the integrated N1 network through the NIE:
just like a workstation. This monitoring allows the NIE to • analog data (AD)
efficiently integrate NCM devices into the Metasys system.
• Active Interconnect (AI)
• analog output digital object (AOD)
• analog outputs (AOs)
• analog output setpoint (AOS)
• binary data (BD)
• binary input (BI)
Network Integration Engine Product Bulletin 3
Software for Efficient Building
• binary output (BO)
• message storage device (MSD)
Operation
NIEs ship with the latest version of the Metasys system
• multistate input (MSI)
software, which provides the following features:
• multistate object output (MSO)
• Metasys Site Management Portal User Interface
• Control System (CS)
provides data and graphic screens to supported web
The N1 migration process leaves the N1 object browsers. Authorized users simply log in to the NIE
configurations unchanged. from the web browser to access the Site Management
Portal. This embedded user interface is ideal for
smaller networks and remote locations where a
Migrating N1 Features dedicated computer platform to support a user
The N1 Integration solution also provides options to interface is not required.
automatically generate features configured for data point
objects in the N1 network system as data object • System Security enables an NIE to recognize
extensions in the NIE. The N1 Integration solution legitimate users with valid user IDs and passwords
supports the following features: at the Site Management Portal user interface. User
access data is encrypted in the transmission and in
• alarms and alarm limit parameters the NIE database. The system administrator manages
• point history trend data collection user profiles, authorization levels, user ID, password,
• totalization of events, runtime, and analog rate value and specific NIE data access privileges in each user
account.
These feature generation options leave the existing N1
feature configurations unchanged. Figure 3: Metasys Site Management Portal Screen
The Metasys system also provides a new Site
Management Portal user interface, which allows you to
view and edit existing N1 schedules and calendars.
N1 Network Data Import Utility
The N1 network data import utility is part of the System
Configuration Tool (SCT) and facilitates the N1 Integration
process in offline mode. The utility reads the N1 point
object configuration from a Metasys OWS file and
converts this information to an XML-based data structure,
which can be used to automatically set up the table of
N1 point objects in the NIE. This utility also imports the
N1 Personal Computer (PC) Groups for generating a
similar display structure in the navigation tree of the
web-enabled Metasys UI, as shown on the OWS.
• Monitoring and Control works with all the
mechanical and electrical systems in a typical building
Automatic Discovery by collecting data from the field devices and then
The table of N1 point objects can also be generated coordinating and sending the required commands to
online by the NIE. The NIE uses the N1 global data to the controlled equipment at the required priority.
penetrate the NCM database and automatically populate • Transaction Recording audits and logs all user
the navigation tree with the objects it finds. The user can actions performed through the NIE.
then confirm or delete each point object for permanent
• Alarm and Event Processing enables NIEs to send
mapping into the NIE database. This feature also helps
alarm and event messages to web browsers, pagers,
keep the NIE synchronized with any changes that you
email servers, Network Management Systems, and
make on the integrated Metasys N1 network.
serial printers, as well as store and view alarm and
When mapping N1 point objects to the NIE database, the event logs on the NIE and transfer it to an ADS.
automatic discovery process also generates alarm, trend, • Historical Trend Data is collected by NIEs for any
and totalization extensions to the mapped objects that monitored value at user-defined intervals, or trending
match the parallel features in the N1 network.
Network Integration Engine Product Bulletin 4
can be based on Change-of-Value. You can use trend
logs to analyze building system performance and
Hardware Features
locate system problems. NIE trend logs can be
transferred to the ADS at defined intervals or when NIE55
the NIE logs are full. We designed the NIE to provide industrial level reliability
• Totalization Data allows you to monitor energy (and for the building controls market.
other consumables) use and generate cost reports
The NIE55 Series features:
to support utility cost reductions, and also provides
data for service, maintenance, and early identification • industrial single board computer (SBC)
of building system problems. • Johnson Controls® OEM Version of Microsoft®
• Trend Studies allows you to view multiple trend Windows® Embedded Standard 2009 operating
extensions in a single view to facilitate monitoring and system
troubleshooting your Metasys site. • nonvolatile solid-state flash memory to store all
• Scheduling allows you to define occupancy periods programs and data
and start and stop times for mechanical or electrical • battery backup to keep the NIE online and operating
equipment. Operating parameters can be set during short power outages, and to transfer data from
according to time of day, day/days of the week, dynamic random access memory (DRAM) into flash
holiday, or for calendar dates. memory when the power supply fails
• Network-Wide System Interlocking enables NIEs • real-time clock with battery backup
to collect field controller data, make logical
• status-indicating LEDs for power, communications,
comparisons, and issue relevant commands to other
and fault detection allow easy troubleshooting
field controllers anywhere on the network.
• optional internal modem
• Optimal Start automatically determines the best time
to start heating and cooling systems to ensure that • removable terminal block plugs for 24 VAC power
the facility is ready for occupants. It adjusts to • standard 9-pin sub-D connectors for RS232C Serial
seasonal variations and reduces energy use. ports A and B
• Demand Limiting Load Rolling (DLLR) monitors • standard USB ports for USB Serial Ports A and B
energy meters for electricity, gas, steam, or water, • 6-pin modular telephone line port for internal modem
and automatically sheds equipment loads according
• RJ45 port for Ethernet connection
to user-defined levels. Demand Limit helps manage
utility demand charges. Load Rolling controls
equipment operating levels to reduce total energy Software Features
consumption. Comfort overrides prioritize equipment
shedding.
• Database Configuration Management allows you
NIE85
to define the Metasys system configuration and The NIE85 software has most of the same functions and
database offline for download to the NIE. All the capabilities as the NIE55 and features a scalable design.
required database configuration software resides on The NIE85 and integrates large numbers of BACnet IP
the NIE or SCT. You do not need a copy of the devices into your Metasys network.
database on your local client computer to make Note: The NIE85 is available in software only.
authorized changes.
The NIE85 supports virtual environments, including
All the software required for the Metasys N1 network VMWare® and Microsoft Hyper-V™. Refer to the for more
configuration and the configuration of N2 devices information.
connected to NCMs continues to reside on an OWS. The
N1 network configuration is normally complete and The NIE85 does not support:
requires only minor changes after the N1 network has • BACnet MS/TP field controllers directly
been integrated through an NIE. • N2 Bus networks
• LONWORKS networks
• dial-out to an ADS/ADX
Network Integration Engine Product Bulletin 5
Conclusion
• device Reset command in the Metasys Site The Metasys N1 Network Integration solution affirms
Management Portal UI Johnson Controls as a leader in the building automation
• upgrade using the NAE/NIE Update Tool systems industry. The NIE shows the commitment to
Consider the following when adding an NIE85. The NIE85: provide an effective and innovative way to migrate
existing Metasys N1 systems to benefit from new
• supports up to four supervisory devices when technologies that provide even more opportunities for the
configured as a Site Director efficient management of buildings.
• is limited to ten simultaneous users The integration of IT and Internet standards into the NIE
• should use an uninterruptible power supply (UPS) for merges the benefits of global communications and
orderly shutdown in the event of sudden power loss. building automation controls into one system. Web
Order the UPS separately. browser-based access from any location is a key to the
effective use of the automation network.
The Metasys system continues to be the network
integration solution in buildings and is now extended to
connect to the business and communication network
systems of the enterprise. The NIE and the Metasys
web-enabled networks are wise investments that yield
returns to the building owner and operator well into the
future.
Repair Information
If the NIE fails to operate within its specifications, replace the unit. For a replacement NIE, contact the nearest
Johnson Controls representative.
Ordering Information
Table 1: NIE55-2 Series Ordering Information
Product Code Number
1 Description
MS-NIE55xx-3 NIE Network Integration Engines: Requires a 24 VAC power supply. Each model includes
two RS-232-C serial ports, two USB serial ports, one Ethernet port, and one MS-BAT1010-0
(Base Features of Each NIE55)
Data Protection Battery. Supports an IP Ethernet network.
MS-NIE5510-2 Supports N1 network migrations
MS-NIE5511-2 Supports N1 network migrations, includes an internal modem
1 Some models are also available in a Buy American version (add a G after the code number). For the European version, add
an E after the code number.
Table 2: NIE55-3 Series Ordering Information
Product Code Number
1 Description
MS-NIE55xx-3 NIE Network Integration Engines: Requires a 24 VAC power supply. Each model includes
two RS-232-C serial ports, two USB serial ports, one Ethernet port, and one MS-BAT1010-0
(Base Features of Each NIE55)
Data Protection Battery. Supports an IP Ethernet network.
MS-NIE5510-3 Supports N1 network migrations
MS-NIE5511-3 Supports N1 network migrations, includes an internal modem
1 Some models are also available in a Buy American version (add a G after the code number). For the European version, add
an E after the code number.
Network Integration Engine Product Bulletin 6
Table 3: NxE5xx-1 Series Windows Embedded Standard 2009 Image Files
Product Code Description
Number
MS-NxE5-1WES-10 10 Licenses—operating system upgrade from Windows XP Embedded to Windows Embedded
Standard 2009
MS-NxE5-1WES-25 25 Licenses—operating system upgrade from Windows XP Embedded to Windows Embedded
Standard 2009
MS-NxE5-1WES-50 50 Licenses—operating system upgrade from Windows XP Embedded to Windows Embedded
Standard 2009
Note: These product codes apply to NxE55-1 engines only. They provide a paid license upgrade from the
WindowsXP® embedded operating system to the WES2009 embedded operating system.
Table 4: NIE85 Series Ordering Information
Product Code Number Description
MS-NxE85SW-0
1 New NxE85 software; for new installations/projects
MS-NxE85SW-6
1 Upgrade NxE85 software; for existing NxE85 engines
1 Standard NIE85 models support 10,000 objects; an expansion upgrade is available to support an additional 15,000 objects.
Table 5: NIE Accessories Ordering Information
Product Code Number Description
MS-15KUPG-0 15,000 object expansion upgrade for NxE85 (one expansion only per NxE85)
MS-MULTENGSW-6 Contains ToggleTunnel utility for converting an NAE55/NIE55 to an NAE55 model with the
N2 Tunneling features enabled
MS-RAP-0 Ready Access Portal Server provides a user interface that is a natural, complementary
extension of the Metasys Site Management Portal.
MS-EXPORT-0 Export Utility extracts historical trend, alarm, and audit data from the system and presents
the historical data in a variety of formats.
MS-BAT1010-0 Replacement data protection battery for NAE55 and NIE55; rechargeable gel cell battery
with a typical life of 3 to 5 years at 21°C (70°F)
AS-XFR100-1 Power transformer (Class 2, 24 VAC, 92 VA maximum output), with enclosure
AS-XFR010-1 Power transformer (Class 2, 24 VAC, 92 VA maximum output), no enclosure
(OEM Part No.) Recommended Uninterruptible Power Supply for NIE85 Models: Smart-UPS SC 450 VA,
280 W 120 VAC input/output with NEMA 5-15R output connections
SC450RM1U
Technical Specifications
Table 6: NIE55xx-2
Power Requirement Dedicated Nominal 24 VAC, Class 2 Power Supply (North America), safety extra-low voltage (SELV)
Power Supply (Europe), at 50/60 Hz (20 VAC Minimum to 30 VAC Maximum)
Power Consumption 50 VA Maximum
Ambient Operating 0 to 50°C (32 to 122°F), 10 to 90% RH, 30°C (86°F) maximum dew point
Conditions
Ambient Storage -40 to 70°C (-40 to 158°F), 5 to 95% RH, 30°C (86°F) maximum dew point
Conditions
Data Protection Battery Supports data protection on power failure. Rechargeable gel cell battery: 12 V, 1.2 Ah, with a typical
life of 3 to 5 years at 21°C (70°F); Product Code Number: MS-BAT1010-0
Clock Battery Maintains real-time clock through a power failure. Onboard cell; typical life 10 years at 21°C (70°F)
Network Integration Engine Product Bulletin 7
Table 6: NIE55xx-2
Processor 1.6 GHz Intel® Atom® processor N270
Memory 4 GB (2 GB partitioned) flash nonvolatile memory for operating system, configuration data, and
operations data storage and backup
1 GB synchronous dynamic random access memory (SDRAM) for operations data dynamic memory
Operating System Johnson Controls OEM Version of Microsoft Windows Embedded Standard 2009
Network and Serial One Ethernet port; connects at 10 Mbps, 100 Mbps, or 1 Gbps; 8-pin RJ-45 connector
Interfaces
Two RS-232-C serial ports, with standard 9-pin sub-D connectors, that support all standard baud
rates
Two USB serial ports; standard USB connectors support an optional, user-supplied external modem
Options: One telephone port for internal modem; up to 56 kbps; 6-pin modular connector
Housing Plastic housing with internal metal shield
Plastic material: ABS + polycarbonate UL 94-5VBProtection: IP20 (IEC 60529)
Mounting On flat surface with screws on four mounting feet or on dual DIN rail
Dimensions(Height x 226 x 332 x 96.5 mm (8.9 x 13.1 x 3.8 in.) including mounting feet minimum space for mounting
Width x Depth) NIE: 303 x 408 x 148 mm (12.0 x 16.1 x 5.8 in.)
Shipping Weight 4.15 kg (9.15 lb)
Compliance United States: UL Listed, File E107041, CCN PAZX, UL 916, Energy Management Equipment;
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Canada: UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205, Signal Equipment;
Industry Canada Compliant, ICES-003
Europe: CE Mark – Johnson Controls, Inc. declares that this product is in compliance with the
essential requirements and other relevant provisions of the EMC Directive.
Australia and New Zealand: RCM Mark, Australia/NZ Emissions Compliant
Table 7: NIE55xx-3
Power Requirement Dedicated nominal 24 VAC, Class 2 power supply (North America), SELV power supply
(Europe), at 50/60 Hz (20 VAC minimum to 30 VAC maximum)
Power Consumption 50 VA maximum
Ambient Operating Conditions 0 to 50°C (32 to 122°F); 10 to 90% RH, 30°C (86°F) maximum dew point
Ambient Storage Conditions -40 to 70°C (-40 to 158°F); 5 to 95% RH, 30°C (86°F) maximum dew point
Data Protection Battery Supports data protection on power failure. Rechargeable gel cell battery: 12 V, 1.2 Ah, with
a typical life of 3 to 5 years at 21°C (70°F); Product Code Number: MS-BAT1010-0
Clock Battery Maintains real-time clock through a power failure. Onboard cell; typical life 10 years at 21°C
(70°F)
Processor 1.46 GHz Intel® Atom™ Bay Trail E3815 processor
Memory 16 GB flash nonvolatile memory for operating system, configuration data, and operations data
storage and backup.
4 GB DDR3 SDRAM for operations data dynamic memory
Operating System Johnson Controls OEM Version of Microsoft Windows Embedded Standard 7 with SP1 (WES7)
Network Integration Engine Product Bulletin 8
Table 7: NIE55xx-3
Network and Serial Interfaces One Ethernet port; connects at 10 Mbps, 100 Mbps, or 1 Gbps; 8-pin RJ-45 connector
Two RS-232-C serial ports, with standard 9-pin sub-D connectors, that support all standard
baud rates
Two USB serial ports; standard USB connectors support an optional, user-supplied external
modem
Options: One telephone port for internal modem; up to 56 kbps; 6-pin modular connector
Housing Plastic housing with internal metal shield
Plastic material: ABS + polycarbonate; Protection: IP20 (IEC 60529)
Mounting On flat surface with screws on four mounting feet or on dual 35 mm DIN rail
Dimensions(Height x Width x 226 x 332 x 96.5 mm (8.9 x 13.1 x 3.8 in.) including mounting feet
Depth)
Minimum space for mounting: 303 x 408 x 148 mm (12.0 x 16.1 x 5.8 in.)
Shipping Weight 4.15 kg (9.15 lb)
Compliance United States: UL Listed, File E107041, CCN PAZX, UL 916, Energy Management Equipment,
FCC Compliant to CFR47, Part 15, Subpart B, Class A
Canada: UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205, Signal Equipment,
Industry Canada Compliant, ICES-003
Europe: CE Mark - Johnson Controls, Inc. declares that this product is in compliance with
the essential requirements and other relevant provisions of the EMC Directive.
Australia and New Zealand: RCM Mark, Australia/NZ Emissions Compliant
BACnet International: BACnet Testing Laboratories™ (BTL) 35-2004 Listed BACnet Building
Controller (B-BC)
Table 8: NxE85 Software System Recommendations for Installation/Upgrade
Product Code MS-NxE85SW-0: NxE85 software for 10,000 objects (new projects only software)
Recommended Computer Intel® Xeon® E5506, 2.13 GHz, 4 MB Cache
Platform
2 x 160 GB 7.2K RPM , 8.9 cm (3.5 in.) Cabled
3 Gbps, RAID 1 configuration with add-in SAS6/iR (SATA/SAS Controller)
Recommended Memory 2 GB RAM minimum
Hard Disk 160 GB minimum
Supported Operating Windows Server® 2012 R2 Editions
Systems and Software
Microsoft .NET Framework Version 3.5 SP1
Windows Server 2012 Editions
Microsoft .NET Framework Version 3.5 SP1
Windows Server 2008 R2 Standard and Enterprise Editions with SP1
Microsoft .NET Framework Version 3.5 SP1
Windows Server 2008 R2 Web Edition with SP1
Microsoft .NET Framework Version 3.5 SP1
Network Integration Engine Product Bulletin 9
Table 8: NxE85 Software System Recommendations for Installation/Upgrade
Supported Operating Windows® 8.1 Pro and Windows 8.1 Enterprise Editions (64-bit)
Systems for Metasys
Windows 8 Pro and Windows 8 Enterprise Editions (64-bit)
Client Computer
Windows 7 Professional, Enterprise, and Ultimate Editions with SP1 (32-bit or 64-bit)
Apple® OS X® 10.8 Mountain Lion
Apple OS X 10.9 Mavericks
Note: Apple operating systems are supported for Metasys client computers only.
Note: In OS X, you cannot view Graphics+ graphics in the Site Management Portal UI.
Internal Optical Drive DVD ROM, SATA
Recommended Antivirus Symantec Endpoint Protection Version 12
Software
Supported Web Browser Windows Internet Explorer® versions 8, 9, 10, and 11
Software for Metasys
Note: In Internet Explorer 11, select the Use Microsoft compatibility lists option, found under
Client Computers
Tools > Compatibility View Settings, to ensure that websites appear and function correctly.
Apple Safari® version 6.0.5 and 7.0
(Other browsers, such as Google® Chrome™ and Mozilla® Firefox®, may also be used but are not
fully supported.)
Note: You use the web browser to download the Launcher application. After you install the
Launcher application, you use the Launcher, not the web browser, to log in to Metasys Site
Management Portal (SMP) UI.
Supported Virtual Microsoft Hyper-V™, VMware®
Environments
Network Communication Network Interface: Single 1 Gbps Ethernet network interface card 10/100/1000 Mbps (100 Mbps or
better recommended)
Recommended Data UPS: APC® Smart-UPS SC 450 VA, 280 W, 120 VAC input/output, National Electrical Manufacturers'
Protection Association (NEMA) 5-15R output connections, OEM Part No. SC450RM1U
The performance specifications are nominal and conform to acceptable industry standard. For application at conditions
beyond these specifications, consult the local Johnson Controls® office. Johnson Controls, Inc. shall not be liable
for damages resulting from misapplication or misuse of its products.
North American Emissions Compliance
United States Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area may cause harmful
interference, in which case the users will be required to correct the interference at their own expense.
Canadian Emissions Compliance
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
Network Integration Engine Product Bulletin 10
European Single Point of Contact: NA/SA Single Point of Contact: APAC Single Point of Contact:
JOHNSON CONTROLS JOHNSON CONTROLS JOHNSON CONTROLS
WESTENDHOF 3 507 E MICHIGAN ST C/O CONTROLS PRODUCT
MANAGEMENT
45143 ESSEN MILWAUKEE WI 53202
NO. 22 BLOCK D NEW DISTRICT
GERMANY USA
WUXI JIANGSU PROVINCE 214142
CHINA
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.
All other marks herein are the marks of their respective owners.© 2016 Johnson Controls, Inc.
Published in U.S.A. www.johnsoncontrols.com
Network Integration Engine Product Bulletin 11Позиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.