| Вид документа | Бюлетень виробу |
|---|---|
| Виробник | JCI |
| Код документа | m9220-bxx-3-series-on-off-electric-spring-return-actuators-product-bulletin |
| Група обладнання | DMPR-KC003 Blade Pin Extension |
| Сторінок | 6 |
| Мова документа | англійська |
| Розмір файлу | 0.2 МБ |
Текст документа
Product Bulletin M9220-Bxx-3
Issue Date November 2019
M9220-Bxx-3 Series
On/Off Electric Spring Return Actuators
The M9220-Bxx-3 Series On/Off Actuators are
direct-mount, spring return electric actuators that
operate on AC 24 V power at 50/60 Hz, DC 24 V
power, AC 120 V power at 60 Hz, or AC 230 V power
at 50/60 Hz. These bidirectional actuators do not
require a damper linkage, and are easily installed on
dampers with 1/2 to 3/4 in. or 12 to 19 mm round
shafts, or 3/8 and 1/2 in. or 10, 12, and 14 mm square
shafts using the standard shaft clamp included with the
actuator. An optional M9220-600 Jackshaft Coupler Kit
is available for 3/4 to 1-1/16 in. or 19 to 27 mm round
shafts, or 5/8 and 3/4 in. or 16, 18, and 19 mm square
shafts.
A single M9220-Bxx-3 Series On/Off Electric Spring
Return Actuator provides a running and spring return
torque of 177 lb⋅in (20 N⋅m). Two like models mounted
in tandem using the M9000-158 Tandem Mounting Kit
deliver twice the torque or 354 lb⋅in (40 N⋅m). Integral Figure 1: M9220-Bxx-3 Series
line voltage auxiliary switches are available on the On/Off Electric Spring Return Actuator
BxC models to indicate end-stop position, or to
perform switching functions within the selected rotation
range.
Features and Benefits
Available Torques of 177 lb⋅in (20 N⋅m) Offer a selection that is most suitable for the application
for Single Actuators and 354 lb⋅in
(40 N⋅m) for Two Like Models Mounted
in Tandem
Reversible Mounting Design Simplifies installation and enables the actuator to spring return
in either direction
Electronic Stall Detection throughout Extends the life of the actuator by deactivating the actuator
Entire Rotation Range motor when an overload condition is detected
Removable Coupler Adapts to a shorter damper shaft
Integral 48 in. (1.2 m) Halogen-Free Simplify field wiring
Cables with Colored and Numbered
Conductors
Integral Auxiliary Switches Provide one fixed and one adjustable switch point with line
(BxC Models) voltage capability
Continued on next page . . .
© 2017 Johnson Controls, Inc. 1
Code No. LIT-1201755 www.johnsoncontrols.com
Features and Benefits (Cont.)
NEMA 2 (IP54) Rated Aluminum Protects the internal components of the actuator from dirt and
Enclosure moisture
Easy-to-Use Locking Manual Override Allows for manual positioning of the actuator hub
with Auto Release and Crank Storage
Integral Connectors for 3/8 in. Flexible Simplify installation and field wiring
Metal Conduit
Product Details Operation
The M9220-Bxx-3 Series On/Off Electric Spring Return With power applied, the M9220-Bxx-3 Series On/Off
Actuators are designed to position return air, exhaust Electric Spring Return Actuator provides reliable,
air, or outside air dampers in Heating, Ventilating, and integrated damper control. An AC 24 V at 50/60 Hz or
Air Conditioning (HVAC) systems. Refer to the DC 24 V input signal (BGx models), an AC 120 V input
manufacturer’s information to properly size the damper signal at 60 Hz (BAx models), or an AC 230 V input
and/or actuator. signal at 50/60 Hz (BDx models) causes the output
hub to rotate from -5 to 90° (unless an external
IMPORTANT: Use this M9220-Bxx-3 Series mechanical limit is reached).
On/Off Electric Spring Return Actuator only to
control equipment under normal operating The output hub holds its position until power is
conditions. Where failure or malfunction of the removed. When power is removed, the actuator spring
electric actuator could lead to personal injury or returns to its -5° position (unless an external
property damage to the controlled equipment or mechanical limit is reached). A stall condition during
other property, additional precautions must be travel from -5 to 90° causes the output hub to stop
designed into the control system. Incorporate and motion and hold its position until power is removed.
maintain other devices such as supervisory or alarm Rotation is mechanically limited to 90° by integral
systems or safety or limit controls intended to warn end-stops. Optional end-stops are available to limit the
of, or protect against, failure or malfunction of the output hub travel. An anti-rotation bracket prevents
electric actuator. rotational movement of the actuator body. The
actuator output rotates Clockwise (CW) when viewed
from Side A and Counterclockwise (CCW) when
viewed from Side B.
IMPORTANT: Do not install or use this
M9220-Bxx-3 Series On/Off Electric Spring Return Repairs and Replacement
Actuator in or near environments where corrosive A number of replacement parts are available; see
substances or vapors could be present. Exposure of Table 2 for more details. If the M9220-Bxx-3 Series
the electric actuator to corrosive environments may On/Off Electric Spring Return Actuator fails to operate
damage the internal components of the device, and within its specifications, replace the unit. For a
will void the warranty. replacement electric actuator, contact the nearest
Johnson Controls representative.
2 M9220-Bxx-3 Series On/Off Electric Spring Return Actuators Product Bulletin www.johnsoncontrols.com
Ordering Information
Table 1: Electric Spring Return Actuator Models
Code Control Auxiliary Power
Number Type Switches Requirements
M9220-BGA-3 On/Off None AC 24 V at 50/60 Hz or
DC 24 V
M9220-BGC-3 On/Off Two AC 24 V at 50/60 Hz or
DC 24 V
M9220-BAA-3 On/Off None AC 120 V at 60 Hz
M9220-BAC-3 On/Off Two AC 120 V at 60 Hz
M9220-BDA-3 On/Off None AC 230 V at 50/60 Hz
M9220-BDC-3 On/Off Two AC 230 V at 50/60 Hz
Table 2: Accessories and Replacement Parts (Order Separately)
Code Description
Number
DMPR-KC003* 7 in. (178 mm) Blade Pin Extension (without Bracket) for Johnson Controls® Direct-Mount
Damper Applications
M9000-158 Tandem Mounting Kit used to Mount Two Like Models of M9220-Bxx-3 Series On/Off Electric
Spring Return Actuators in Tandem to Deliver Twice the Torque
M9000-604 Replacement Anti-rotation Bracket Kit (with Screws) for M9220-Bxx-3 Series On/Off Electric
Spring Return Actuators
M9220-600 1 in. (25 mm) Jackshaft Coupler Kit (with Locking Clip) for Mounting M9220-Bxx-3 Series On/Off
Electric Spring Return Actuators on Dampers with 3/4 to 1-1/16 in. or 19 to 27 mm Round Shafts,
or 5/8 and 3/4 in. or 16, 18, and 19 mm Square Shafts
M9220-601 Replacement Coupler Kit (with Locking Clip) for Mounting M9220-Bxx-3 Series On/Off Electric
Spring Return Actuators on Dampers with 1/2 to 3/4 in. or 12 to 19 mm Round Shafts, or 3/8 and
1/2 in. or 10, 12, and 14 mm Square Shafts
M9220-602 Replacement Locking Clips for M9220-Bxx-3 Series On/Off Electric Spring Return Actuators
(Five per Bag)
M9220-603 Adjustable Stop Kit for M9220-Bxx-3 Series On/Off Electric Spring Return Actuators
M9220-604 Replacement Manual Override Cranks for M9220-Bxx-3 Series On/Off Electric Spring Return
Actuators (Five per Bag)
M9220-610 Replacement Shaft Gripper, 10 mm Square Shaft with Locking Clip
M9220-612 Replacement Shaft Gripper, 12 mm Square Shaft with Locking Clip
M9220-614 Replacement Shaft Gripper, 14 mm Square Shaft with Locking Clip
* Furnished with the damper and may be ordered separately.
M9220-Bxx-3 Series On/Off Electric Spring Return Actuators Product Bulletin 3
4
(102)
2
(51)
3-3/16
1-19/32 1-19/32
(81)
(40) (40) 1/8 3/4
(3) (19)
A
2-3/16
1-19/32 (56)
(40)
1-1/16
(27)
10-5/16 10
(262) (254)
6-15/16
(176)
9/32 (7)
Diameter
(6 Locations)
1 2-3/16
1-3/4 (25) (56)
(44)
fig2
Figure 2: M9220-Bxx-3 Series
On/Off Electric Spring Return Actuator Dimensions, in (mm)
4 M9220-Bxx-3 Series On/Off Electric Spring Return Actuators Product Bulletin www.johnsoncontrols.com
Technical Specifications
Product M9220-Bxx-3 Series On/Off Electric Spring Return Actuators
Power Requirements BGx Models Nominal AC 24 V at 50/60 Hz: Class 2, 24.6 VA Running, 5.4 VA Holding
Position;
Nominal DC 24 V: Class 2, 17.6 W Running, 2.8 W Holding Position
BAx Models Nominal AC 120 V at 60 Hz: 0.25 A Running, 0.13 A Holding Position
BDx Models Nominal AC 230 V at 50/60 Hz: 0.15 A Running, 0.09 A Holding Position
Auxiliary Switch Rating BxC Models Two Single-Pole, Double-Throw (SPDT), Double-Insulated Switches with
Gold Flash Contacts:
AC 24 V, 50 VA Pilot Duty;
AC 120 V, 5.8 A Resistive, 1/4 hp, 275 VA Pilot Duty;
AC 240 V, 5.0 A Resistive, 1/4 hp, 275 VA Pilot Duty
Spring Return Direction is Selectable with Mounting Position of Actuator:
Side A, Actuator Face Away from Damper for CCW Spring Return;
Side B, Actuator Face Away from Damper for CW Spring Return
Running and Spring 177 lb⋅in (20 N⋅m) for a Single Actuator;
Return Torque 354 lb⋅in (40 N⋅m) for Two Like Models Mounted in Tandem
Rotation Range Adjustable from 30 to 90° CW or CCW with Optional
M9220-603 Adjustable Stop Kit; Mechanically Limited to 90°
Rotation Time Power On 24 to 57 Seconds for 0 to 177 lb⋅in (0 to 20 N⋅m) at All Operating
(Running) Conditions; 35 Seconds Nominal at Full Rated Load
Power Off 11 to 15 Seconds for 0 to 177 lb⋅in (0 to 20 N⋅m) at Room Temperature;
(Spring 35 Seconds Maximum for 0 to 177 lb⋅in (0 to 20 N⋅m) at -22°F (-30°C)
Returning) 130 Seconds Maximum for 0 to 177 lb⋅in (0 to 20 N⋅m) at -40°F (-40°C)
Cycles 60,000 Full Stroke Cycles
Audible Noise Rating Power On 66 dBA Nominal at 39-13/32 in. (1 m)
(Running)
Power On 18 dBA Nominal at 39-13/32 in. (1 m)
(Holding)
Power Off 66 dBA Nominal at 39-13/32 in. (1 m)
(Spring
Returning)
Electrical Connections Actuator (All 48 in. (1.2 m) Halogen-Free Cable with 18 AWG (0.75 mm2) Wire Leads
Models)
Auxiliary 48 in. (1.2 m) Halogen-Free Cable with 18 AWG (0.75 mm2) Wire Leads
Switches
(BxC Models)
Conduit Connections Integral Connectors for 3/8 in. Flexible Metal Conduit
Mechanical Connections Standard 1/2 to 3/4 in. or 12 to 19 mm Diameter Round Shafts, or
Shaft Clamp 3/8 and 1/2 in. or 10, 12, and 14 mm Square Shafts
Included with
Actuator
Optional 3/4 to 1-1/16 in. or 19 to 27 mm Diameter Round Shafts, or
M9220-600 5/8 and 3/4 in. or 16, 18, and 19 mm Square Shafts
Jackshaft
Coupler Kit
Aluminum Enclosure NEMA 2 (IP54) for All Mounting Orientations
Ambient Conditions Operating -40 to 131°F (-40 to 55°C); 90% RH Maximum, Noncondensing
Storage -85 to 185°F (-65 to 85°C); 95% RH Maximum, Noncondensing
Dimensions See Figure 2.
Continued on next page . . .
M9220-Bxx-3 Series On/Off Electric Spring Return Actuators Product Bulletin 5
Technical Specifications (Cont.)
Compliance North UL Listed, File E27734, CCN XAPX (United States) and
America XAPX7 (Canada)
European CE Mark, EMC Directive 2004/108/EC and Low Voltage Directive
Union 2006/95/EC
Australia and C-Tick Mark, Australia/NZ Emissions Compliant (BGx and BDx Models)
New Zealand
Shipping Weight BAx and BDx 7.6 lb (3.5 kg)
Models
BGx Models 6.4 lb (2.9 kg)
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Contact information
Contact Information
Region Group Contact information
Global Johnson Controls www.johnsoncontrols.com/contact-us
www.johnsoncontrols.com/locations
North America PENN Controls www.penncontrols.com/contact
1-888-220-6668
Verasys Control www.verasyscontrols.com/contact
1-844-820-4830
Triatek www.triatek.com/contact
1-888-424-1922 | 1-770-242-19
Sales support
Region Group Contact information
North America Product Sales Support jciorder@jci.com
1-800-275-5676; Option 1: Order Support
Applied DX Sales Support applieddxsalessupport@jci.com
Triatek Sales Support sales@triatek.com
1-888-424-1922 | 1-770-242-1922
Product warranty
This product is covered by a limited warranty, details of which can be found at www.johnsoncontrols.com/buildingswarranty.
Patents
Patents: http://jcipat.com
Single point of contact
APAC Europe NA/SA
JOHNSON CONTROLS JOHNSON CONTROLS JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT WESTENDHOF 3 507 E MICHIGAN ST
NO. 32 CHANGJIJANG RD NEW DISTRICT 45143 ESSEN MILWAUKEE WI 53202
WUXI JIANGSU PROVINCE 214028 - CHINA GERMANY USA
For more contact information, refer to www.johnsoncontrols.com/locations.
Building Efficiency
507 E. Michigan Street, Milwaukee, WI 53202
Johnson Controls® is registered trademark of Johnson Controls.
All other marks herein are the marks of their respective owners.
© Copyright 2019 Johnson Controls. All rights reserved. Any unauthorized use or copying is strictly prohibited.
6 M9220-Bxx-3 Series On/Off Electric Spring Return Actuators Product Bulletin www.johnsoncontrols.comПозиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.