| Вид документа | Технічний бюлетень |
|---|---|
| Виробник | JCI |
| Код документа | m9216-ggx-2-and-m9216-hgx-2-series-proportional-control-electric-spring-return |
| Група обладнання | DMPR-KC003 Blade Pin Extension |
| Сторінок | 4 |
| Мова документа | англійська |
| Розмір файлу | 0.2 МБ |
Текст документа
Submittal Bulletin
Issue Date February 3, 2003
M9216-GGx-2 and M9216-HGx-2 Series Proportional Control
Electric Spring Return Actuators
The M9216-GGx-2 and M9216-HGx-2 Series
direct-mount, spring return electric actuators operate
on 24 VAC or VDC power and are available for use
with proportional controllers. These bidirectional
actuators do not require a damper linkage, and are
easily installed on a damper with a round shaft up to
3/4 in. (19 mm) in diameter or a square shaft up to 5/8
in. (16 mm). M9216-GGx-2 and M9216-HGx-2
actuators may be direct or remote mounted to a
damper, or mounted to a valve using one of the
M9000-5xx Valve Linkage Kits.
A single M9216-GGx-2 or M9216-HGx-2 model
delivers up to 140 lb∙in (16 N∙m) of torque. Two
GGx models in tandem deliver twice the torque or
280 lb∙in (32 N∙m). The angle of rotation is
mechanically adjustable from 30 to 90°. Integral Figure 1: M9216 Series Actuator
auxiliary switches are available to indicate end-stop
position or to perform switching functions at any angle
within the selected rotation range. Position feedback is
available through switches, a potentiometer, or a 0 (2)
to 10 VDC signal.
Features and Benefits
Electronic Stall Detection Ensures higher reliability by deactivating the actuator motor when a
stall condition is detected
Available Torques: 140 and Offer selection most suitable for the application
280 lb∙in (16 and 32 N∙m)
Bidirectional, Return-to-Normal Allows selectable rotation/spring return direction simplifying
Spring Return installation
Extended Temperature Range Meets the needs of most outdoor air applications
Output Position Feedback Provides simple, closed-loop control with accurate position sensing
Auto Stroke Calibration Reduces field installation time and cost due to self adjustment
(GGx Models)
Zero and Span Adjustment Allows sequential operation of dampers from a single input signal of
(HGx Models) 0 (2) to 10 VDC, 0 (4) to 20 VDC, or 0 (4) to 20 mA
Manual Override Allows manual positioning when the actuator is not powered;
simplifies setup and field adjustments
National Pipe Thread (NPT) Provides easy connection for electrical fittings and armored cable
Conduit Adaptor (Included)
© 2003 Johnson Controls, Inc. 1
Code No. LIT- 1201487 www.johnsoncontrols.com
Application Operation
IMPORTANT: This device is not designed or IMPORTANT: The M9216 Proportional Series
intended to be used in or near environments where actuators are intended to control equipment under
explosive vapors or gases could be present, or normal operating conditions. Where failure or
environments where substances corrosive to the malfunction of an M9216 Proportional actuator could
device’s internal components could be present. lead to an abnormal operating condition that could
cause personal injury or damage to the equipment or
M9216-GGx-2 and M9216-HGx-2 actuators are other property, other devices (limit or safety controls)
designed to position air dampers and valves in or systems (alarm or supervisory) intended to warn
Heating, Ventilating, and Air Conditioning (HVAC) of, or protect against, failure or malfunction of the
systems. Applications include: M9216 Proportional actuator must be incorporated
into and maintained as part of the control system.
• positioning return air, exhaust, or outdoor air
dampers M9216-GGx-2 and M9216-HGx-2 actuators operate on
• controlling face and bypass dampers 24 VAC at 50/60 Hz or 24 VDC. They use a DC motor
with stall detection circuitry that operates throughout
• positioning blades for variable volume fans the entire stroke. These actuators employ
• positioning VG1000 Series ball valves and noise-filtering techniques on the control signal to
VG7000 Series ball valves when used with an eliminate repositioning due to line noise. Mounting two
M9000-5xx Valve Linkage M9216-GGx-2 or M9216-HGx-2 models in tandem
provides twice the amount of running torque as a
Refer to the manufacturer’s information to properly single unit.
size the damper, valve, and/or actuator.
Rotation is mechanically limited to 93° by integral
end-stops. The position of the actuator is visually
indicated from 0 to 90° on the cover. An anti-rotation
bracket prevents lateral movement of the actuator. The
damper position may be set manually with the manual
override feature in the event of a power failure.
Dimensions
See Figure 2 for actuator dimensions.
4.57 Shaft 0.15
116 Dimensions 3.8
2.15 5.75
0.37 to 0.63 146
9.4 to 16.0 54.6
90 0
60 0.37 to 0.8
0 30 90 9.4 to 20
9.47 30 60 Shaft
241 7.32 1.88
Dimensions Cover 186 48
6.34
161 Removal 2.13
54
3.13
79
4.88
5 mm Hex 124
Manual Crank 1.83 Anti-rotation Bracket
46.5 1.52
0.35 1.97 3.47 Dimensions
50 38.7
9 88
Figure 2: Actuator, Anti-Rotation Bracket, and Manual Crank Dimensions, in. (mm)
2 M9216-GGx-2 Series Proportional Control Electric Spring Return Actuators Submittal Bulletin
Ordering Information
Table 1: Actuator Models and Accessories
Product Code Description
Number
M9216-GGA-2 140 lb∙in (16 N∙m) or 280 lb∙in (32 N∙m) in tandem electric spring return actuator for proportional control
with 0 to 10 VDC feedback and auto-calibration
M9216-GGC-2 140 lb∙in (16 N∙m) or 280 lb∙in (32 N∙m) in tandem electric spring return actuator for proportional control
with 0 to 10 VDC feedback, auto-calibration, and two SPDT 24 VAC auxiliary switches
M9216-HGA-2 140 lb∙in (16 N∙m) or 280 lb·in (32 N∙m) in tandem, electric spring return actuator for proportional control,
0 to 10 VDC feedback and adjustable zero and span
M9216-HGC-2 140 lb∙in (16 N∙m) or 280 lb·in (32 N∙m) in tandem, electric spring return actuator for proportional control,
0 to 10 VDC feedback, adjustable zero and span, and two SPDT 24 VAC auxiliary switches
DMPR-KR003* Sleeve Pin Kit for Johnson Controls round dampers with a 5/16 in. (8 mm) diameter shaft
DMPR-KC003* Blade Pin Extension without Bracket for Johnson Controls D-1300 direct-mount applications
DMPR-KC254 Inside Frame Mounting Kit for Johnson Controls dampers that require the actuator within the airstream
M9000-100** Conduit Adaptor Kit
M9000-103 14 VA Transformer, 120/24 VAC, 60 Hz, Class 2
M9000-104 14 VA Transformer, 230/24 VAC, 60 Hz, Class 2
M9000-105 Pluggable 3-terminal block
M9000-106 Pluggable 4-terminal block
M9000-150 Damper Mount Linkage Kit for remote inside duct mounting an M9216 actuator to a 3-blade or larger
damper (not intended for a Johnson Controls damper)
M9000-151 Base Mount Linkage Kit for remote inside duct mounting (not intended for M9216 tandem applications)
M9000-153 Crank Arm Kit for remote mounting (not intended for M9216 tandem applications)
M9000-154 1 in. Jackshaft Coupler for mounting on a 1 in. diameter damper shaft
M9000-158 Mounting Kit for tandem mounting two each M9216 GGx or HGx models on a damper
M9000-160 Replacement anti-rotation bracket for M9216 Series actuators
M9000-200 Commissioning Tool provides a control signal to drive on/off, floating, proportional, or resistive actuators.
M9000-500 Valve Linkage Kit for mounting M9216 actuators to 1/2 to 2 in. VG7000 Series globe valves
M9000-510 Valve Linkage Kit for mounting M9216 actuators to 1/2 and 3/4 in. 2-way or 3-way VG1000 Series ball
valves, and 1 and 1-1/4 in. 2-way VG1000 Series ball valves
M9000-511 Valve Linkage Kit for field mounting M9216 actuators to 1 and 1-1/4 in. 3-way VG1000 Series ball valves
* Furnished with the damper and may be ordered separately.
** Furnished with the actuator and may be ordered separately.
M9216-GGx-2 Series Proportional Control Electric Spring Return Actuators Submittal Bulletin 3
Technical Specifications
Product M9216 Series Proportional Control Electric Spring Return Actuators
Power Requirements GGx: 20 to 30 VAC at 50/60 Hz or 24 VDC ±10%, 14 VA supply from 32 to 122°F
(0 to 50°C) or 18 VA supply from -22 to 32°F (-30 to 0°C), Class 2
HGx: 20 to 30 VAC at 50/60 Hz or 24VDC +/-10%, 12 VA Supply, minimum, Class 2
Input Signal 0 to 10 VDC or 0 to 20 mA
Input Signal Adjustments GGx: (Voltage or Current Input):
Switch Selectable: 0 (2) to 10 VDC or 0 (4) to 20 mA
Factory Setting: 0 to 10 VDC, CW rotation with signal increase
HGx: (Voltage Input or Current Input):
Jumper Selectable, Fixed: 0(2) to 10 VDC or 0(4) to 20 mA
Adjustable: Zero, 0 to 6 V (0 to 12 mA); Span, 2 to 10 V
(4 to 20 mA)
Factory Setting: 0 to 10 VDC, 0 to 20 mA, CW rotation with
signal increase
Direction of action is user selectable Direct (CW) or Reverse (CCW) with
signal increase.
Input Impedance Voltage Input, 200,000 ohms; Current Input, 500 ohms
Feedback Signal 0 to 10 VDC or 2 to 10 VDC for 90° (1mA at 10VDC)
Corresponds to input signal span selection and rotation limits.
Auxiliary Switch Rating GGC: Two SPDT (Single-Pole, Double-Throw) switches rated at 24 VAC,
1.5 A inductive, 3.0 A resistive, 35 VA maximum per switch, Class 2
Spring Return Factory Setting: CCW; Direction is selectable with the coupler.
Mechanical Output 140 lb∙in (16 N∙m) for one unit, 280 lb∙in (32 N∙m) for two units in tandem
(Running Torque)
Rotation Range Adjustable from 30 to 90°, CW or CCW, mechanically limited to 93°
Rotation Time 70 to 130 seconds for 0 to 140 lb∙in (0 to 16 N∙m); 90 seconds nominal at 50% rated load
(Powered rotation is faster in the spring return direction than in the spring winding direction;
power failed spring return is less than 15 seconds.)
Cycles 65,000 full stroke cycles
Electrical Connection 1/4 in. spade terminals with pluggable terminal blocks
M9000-100: One included with all models; two included with GGC
Mechanical Connection 3/8 to 3/4 in. (10 to 20 mm) diameter round shaft; 3/8 to 5/8 in. (10 to 16 mm) square shaft
Enclosure NEMA 2, IP42
Ambient Operating GGx: -22 to 122°F (-30 to 50°C); 0 to 95% RH, noncondensing
Conditions HGx: -4 to 122F (-20 to 50C); 0 to 95% RH, noncondensing
Ambient Storage -40 to 186°F (-40 to 86°C); 0 to 95% RH, noncondensing
Conditions
Dimensions (H x W x D) 9.82 x 4.57 x 3.62 in. (249.4 x 116.0 x 91.9 mm)
Shipping Weight 6.4 lb (2.9 kg)
Agency Compliance UL Listed, File E27734, CCN XAPX
CSA Certified, File LR85083, Class 3221 02
CE Mark, EMC Directive 89/336/EEC
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or
misuse of its products.
Controls Group
507 E. Michigan Street
P.O. Box 423 Published in U.S.A.
Milwaukee, WI 53201 www.johnsoncontrols.com
4 M9216-GGx-2 Series Proportional Control Electric Spring Return Actuators Submittal BulletinПозиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.