| Вид документа | Технічний бюлетень |
|---|---|
| Виробник | JCI |
| Код документа | m9116-series-proportional-control-electric-non-spring-return-actuators-product |
| Група обладнання | DMPR-KC003 Blade Pin Extension |
| Сторінок | 4 |
| Мова документа | англійська |
| Розмір файлу | 0.2 МБ |
Текст документа
Product/Technical Bulletin
Issue Date October 2017
M9116 Series Proportional Control
Electric Non-spring Return Actuators
The M9116-GGx-2 and M9116-HGx-2 Series
direct-mount electric actuators operate on 24 VAC or
VDC power. These actuators are available for use with
proportional controllers. These bidirectional actuators
do not require a damper linkage, and are easily
installed on a damper with a round shaft up to 3/4 in.
(19 mm) in diameter or a square shaft up to 5/8 in.
(16 mm). They may be direct- or remote-mounted to a
damper.
A single M9116-GGx-2 or M9116-HGx-2 model
delivers 140 lb∙in (16 N∙m) of torque. Two HGx models
in tandem deliver twice the torque, 280 lb·in (32 N∙m).
The angle of rotation is mechanically adjustable from
0 to 90° in 5-degree increments. Integral auxiliary
switches are available to indicate end-stop position or
to perform switching functions at any angle within the
selected rotation range. Jumpers on the actuator allow
users to select the direction of action, range of control Figure 1: M9116 Series Actuator
input, and calibration (fixed or adjustable). Position
feedback is available through a 0 to 10 VDC signal.
Features and Benefits
Output Position Feedback Provides simple, closed-loop control with accurate position sensing
Electronic Stall Detection Ensures higher reliability by deactivating the actuator motor when a
stall condition is detected
Zero and Span Adjustment Allows sequential operation of dampers from a single input signal
(HGx Models) of 0 (2) to 10 VDC, 0 (4) to 20 VDC, or 0 (4) to 20 mA
Removable Coupler Allows adjustment of the rotation range from 0 to 90°
Steel U-bolt Clamp Provides four-point damper shaft gripping
Combination of Actuator, Regulates the flow of hot or chilled water, 50% glycol solution, and
Linkage and Ball-style low pressure steam
Valve
Jumper-selectable Simplifies installation, setup, and field adjustments
Rotation Direction and
Manual Gear Release
Noise Filter Eliminates repositioning due to line noise
National Pipe Thread (NPT) Provides easy connection for electrical fittings
Threaded Housing
© 2017 Johnson Controls 1
Code No. LIT- 1201465 www.johnsoncontrols.com
Application Operation
IMPORTANT: This device is not designed or IMPORTANT: The M9116 Series proportional
intended to be used in or near environments where actuators are intended to control equipment under
explosive vapors or gases could be present, or normal operating conditions. Where failure or
environments where substances corrosive to the malfunction of an M9116 proportional actuator could
device’s internal components could be present. lead to an abnormal operating condition that could
cause personal injury or damage to the equipment or
M9116-GGx-2 and M9116-HGx-2 actuators are other property, other devices (limit or safety
designed to position air dampers and valves in controls), or systems (alarm or supervisory) intended
Heating, Ventilating, and Air Conditioning (HVAC) to warn of, or protect against, failure or malfunction
systems. Applications include: of the M9116 proportional actuator must be
incorporated into and maintained as part of the
• positioning return air or exhaust dampers
control system.
• controlling face and bypass dampers
M9116-GGx-2 and M9116-HGx-2 actuators operate on
• positioning blades for variable volume fans 24 VAC at 50/60 Hz or 24 VDC. These compact
Two of the M9116-HGx-2 models provide twice the actuators use a DC motor with stall detection circuitry
amount of running torque of a single unit when that operates throughout the entire stroke. The GGx
mounted in tandem. and HGx models employ noise-filtering techniques on
the control signal to eliminate repositioning due to line
Refer to the manufacturer’s information to properly noise.
size the damper, valve, and/or actuator. Spring return
actuators, such as Johnson Controls® M9208 and Rotation is mechanically limited to 93° by integral
M9220 Series, are recommended for use with outdoor end-stops. The position of the actuator is marked from
air dampers in cold climates. 0 to 90° on the cover. An anti-rotation bracket prevents
lateral movement of the actuator. Press the
spring-loaded gear release on the actuator cover to
disengage the gear train for manual repositioning of
the coupler.
Dimensions
See Figure 2 for actuator dimensions.
3.94 Shaft 1.04
100 Dimensions 27
0.37 to 0.63 5.75
1.38 146
10 to 16
35
90 0 0.37 to 0.8
7.09 60 30 10 to 20
0 90
180 30 Shaft
60 5.43
Dimensions Cover 1.88
4.92 138 48
Removal
125 2.13
54
3.13
79
4.88
1.73 1.38 124
35 1.22
44 Anti-rotation Bracket
Conduit Plug Centers 2.54
64.5 Dimensions
Figure 2: Actuator and Anti-Rotation Bracket Dimensions, in. (mm)
2 M9116 Series Proportional Control Electric Non-spring Return Actuators Submittal Bulletin
Ordering Information
Table 1: Actuator Models and Accessories
Product Code Description
Number
M9116-GGA-2 140 lb∙in (16 N∙m) electric non-spring return actuator with proportional control and 0 to 10 VDC feedback
M9116-GGC-2 140 lb∙in (16 N∙m) electric non-spring return actuator with proportional control, 0 to 10 VDC feedback
input, and two SPDT 24 VAC auxiliary switches
M9116-HGA-2 140 lb∙in (16 N∙m) or 280 lb·in (32 N m) in tandem, electric non-spring return actuator with proportional
control, 0 to 10 VDC feedback input, adjustable zero and span
M9116-HGC-2 140 lb∙in (16 N∙m) or 280 lb·in (32 N m) in tandem, electric non-spring return actuator with proportional
control, 0 to 10 VDC feedback input, adjustable zero and span, and two SPDT 24 VAC auxiliary switches
DMPR-KR003* Sleeve Pin Kit for Johnson Controls round dampers with a 5/16 in. (8 mm) diameter shaft
DMPR-KC003* Blade Pin Extension without Bracket for Johnson Controls D-1300 direct-mount applications
DMPR-KC254 Inside Frame Mounting Kit for damper applications requiring the actuator within the airstream
M9000-103 14 VA Transformer, 120/24 VAC, 60 Hz, Class 2
M9000-104 14 VA Transformer, 230/24 VAC, 60 Hz, Class 2
M9000-105 Pluggable 3-terminal block
M9000-150 Damper Mount Linkage Kit for remote inside duct mounting an M9116 actuator to a 3-blade to larger
damper (not intended for a Johnson Controls damper)
M9000-151 Base Mount Linkage Kit for remote inside duct mounting (not intended for tandem application)
M9000-153 Crank Arm Kit for remote mounting (not intended for tandem application)
M9000-154 1 in. Jackshaft Coupler Kit for mounting on a 1 in. diameter damper shaft
M9000-155 Manual Handle for positioning a damper or valve when power is removed from an M91xx actuator
M9000-158 Mounting Kit to tandem mount two M9116 GGx or HGx models on a damper.
M9000-160 Replacement anti-rotation bracket for M91xx Series actuators
* Furnished with the damper and may be ordered separately.
M9116 Series Proportional Control Electric Non-spring Return Actuators Submittal Bulletin 3
Technical Specifications
Product M9116 Series Proportional Control Electric Non-spring Return Actuators
Power Requirements 20 to 30 VAC at 50/60 Hz or 24 VDC ±10%; 7.5 VA supply, Class 2
Input Signal 0 (2) to 10 VDC, 0 (4) to 20 VDC, or 0 (4) to 20 mA
Input Signal Adjustments (Voltage Input or Current Input):
Jumper selectable: 0 (2) to 10 VDC, 0 (4) to 20 VDC, or 0 (4) to 20 mA
Adjustable: Zero, 0 to 6 VDC, 0 to 12 VDC, or 0 to 12 mA
Span, 2 to 10 VDC, 4 to 20 VDC, or 4 to 20 mA
Factory Setting: 0 to 10 VDC, 0 to 20 mA, CW rotation with signal increase
Action is jumper selectable Direct (CW) or Reverse (CCW) with
signal increase.
Input Impedance Voltage Input, 205,000 ohms for 0 (2) to 10 V and 410,000 ohms for 0 (4) to 20 V
Current Input, 500 ohms
Feedback Signal 0 to 10 VDC or 2 to 10 VDC for 90° (10 VDC at 1 mA)
Corresponds to input signal span selection.
Auxiliary Switch Rating xGC: Two Single-Pole, Double-Throw (SPDT) switches rated at 24 VAC
1.5 A inductive, 3.0 A resistive; 35 VA maximum per switch, Class 2
Mechanical Output 140 lb∙in (16 N∙m) for one unit, 280 lb∙in (32 N∙m) for two in tandem (HGx)
(Running Torque)
Audible Noise Rating 45 dBA at 1 m
Rotation Range 0 to 90° in 5-degree increments, mechanically limited to 93°
Rotation Time 80 seconds at 50% rated load, 70 to 115 seconds for 0 to 140 lb·in (0 to 16 N∙m)
Electrical Connection Screw terminals for 22 to 14 AWG; maximum of two 18, 20, or 22 AWG per terminal
Mechanical Connection 3/8 to 3/4 in. (10 to 20 mm) diameter round shaft or 3/8 to 5/8 in. (10 to 16 mm) square
shaft
Enclosure NEMA 2, IP42
Ambient Conditions Operating: -4 to 122°F (-20 to 50°C); 0 to 95% RH, noncondensing
Storage: -40 to 186°F (-40 to 86°C); 0 to 95% RH, noncondensing
Dimensions (H x W x D) 7.09 x 3.94 x 2.54 in. (180 x 100 x 64.5 mm)
Shipping Weight 2.9 lb (1.3 kg)
Agency Compliance United States:
UL Listed, CCN XAPX, File E27734; to UL 873, the Standard for Temperature Indicating and
Regulating Equipment, Eleventh Edition
Canada:
UL Listed, CCN XAPX7, File E27734; Canadian Standard C22.2 NO. 24-93, Standard for
Temperature Indicating and Regulating Equipment, Eighth Edition
Europe:
CE Mark – Johnson Controls declares that this product is in compliance with the essential
requirements and other relevant provisions of the EMC Directive 2004/108/EC and Low
Voltage Directive 2006/95/EC.
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these
specifications, consult the local Johnson Controls office. Johnson Controls shall not be liable for damages resulting from misapplication or
misuse of its products.
Building Technologies & Solutions
507 E. Michigan Street, Milwaukee, WI 53202
Metasys® and Johnson Controls® are registered trademarks of Johnson Controls
All other marks herein are the marks of their respective owners. © 2017 Johnson Controls
4 M9116 Series Proportional Control Electric Non-spring Return Actuators Submittal BulletinПозиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.