| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | JCI |
| Код документа | m9109-xgx-2-series-electric-non-spring-return-actuators-catalog-page |
| Група обладнання | M9109 |
| Сторінок | 4 |
| Мова документа | англійська |
| Розмір файлу | 0.8 МБ |
Текст документа
M9109-xGx-2 Series Electric Non-
Spring-Return Actuators Catalog
Page
LIT-1900154
2019-10-10
Description
The M9109 Series direct-mount electric actuators
operate on AC 24 V power and are available for use with
floating or proportional controllers. These non-spring-
return actuators are easily installed on a VAV box, a
round damper shaft up to 1/2 in. (13 mm) in diameter,
or a 3/8 in. (10 mm) square shaft. The M9109 with an
M9000-520 linkage can be used to control 2 in. (DN50)
VG1000 Series ball valves.
The M9109 models have 80 lb·in (9 N·m) running torque.
They have a nominal 60-second travel time for 90° of
rotation at 60 Hz (72 seconds at 50 Hz) with a load-
independent rotation time. The M9109-xGC-2 models
are available with integral auxiliary switches to perform
switching functions at any angle within the selected
rotation range.
Refer to the M9109 Series Electric Non-Spring-Return
Actuators Product Bulletin (LIT-120112) for important
product application information.
M9109-xGx-2
Features Applications
• simple direct coupling reduces installation and The M9109 is used to position balancing, control,
commissioning time and improves reliability round, and zone dampers in typical HVAC
by eliminating damper linkages Single screw applications. It can also be used with an M9000-520
coupling provides three-point shaft gripping linkage to control VG1000 Series ball valves. The
M9109 mounts directly on the duct surface, round
• designed for zone damper and ball valve actuator damper, or small rectangular damper with an
applications anti-rotation bracket and two sheet metal screws
(included). Additional linkages or couplers are not
• small, compact design allows installation in tight- required. For more information, refer to the M9109
fitting locations Series Electric Non-Spring-Return Actuators Installation
Instructions (Part No. 34-636-1190).
• designed for zone damper and ball valve actuator
applications
Repair information
• floating and proportional control inputs If the M9109-xGx-2 Series Electric Actuator fails to
operate within its specifications, replace the unit.
• 60-second running time at 60 Hz For a replacement actuator, contact the nearest
Johnson Controls® representative.
• long life brushless synchronous drive motor
technology provides constant running time
independent of load
• robust 80 lb·in (9 N·m) torque rating
• whisper quiet 35 dBA noise rating
• magnetic clutch provides over torque protection
over the entire range of rotation
• -4°F to 125°F (-20°C to 52°C) ambient temperature
rating
• 100,000 full stroke cycle, 2,500,000 reposition
rating
• manual gear release simplifies setup and field
adjustments
• 1/2 in. NPT threaded conduit opening meets
electrical code requirements and allows the use
of flexible armored cable
• position feedback (-GGX models) provides simple,
closed-loop control with accurate position sensing
• adjustable rotation stops allow application
versatility with 30 to 90° clockwise or
counterclockwise rotation
M9109-xGx-2 Series Electric Non-Spring-Return Actuators Catalog Page 2
Selection chart
Code number Control type Torque / timing / voltage Auxiliary switches Comments
M9109-AGA-2
1 Floating 80 lb·in (9 N·m) None
60 seconds at 60 Hz
M9109-AGC-2 2-SPDT
AC 24 V 50/60 Hz
M9109-AGC-2 DC 0(2) to 10 V None DC 0(2) to 10 V feedback
M9109-GGC-2 DC 0(4) to 20 mA 2-SPDT
proportional
1 To avoid excessive wear or drive time on the motor for the -AGx models, use a controller and/or software that provides a time-out
function to remove the signal at the end of rotation (stall). The -GGx models have an auto shutoff to avoid excessive wear or drive
time on the motor.
Accessories
Code number Description
DMPR-KC003 Square head blade pin extension without bracket
DMPR-KC010 Adjustable blade position indicator switch kit with total switching load limited to 2,000 VA for the following
applications:
Pilot duty: AC 24 V, 50 VA; AC 125/250/277 V, 125 VA
Motor load: AC 125/250/277 V, 1/3 hp
Resistive load: AC 125 V, 11 A; AC 250 V, 8 A; AC 277 V, 7 A (all maximum values)
DMPR-KC011 Hex head blade pin extension without bracket
DMPR-KC012 Hex head blade pin extension with bracket
DMPR-KC213 Damper jackshaft 1/2 in. diameter, 1 panel
DMPR-KC214 Damper jackshaft 1/2 in. diameter, 2 panel
M9000-105 Pluggable 3-terminal block
M9000-106 Pluggable 4-terminal block
M9000-160 Replacement anti-rotation bracket for M9106 and M9109 Series actuators
M9000-520 Valve linkage kit for field mounting an M9109 actuator to a 2 in. (DN50) VG1000 Series ball valve
3 M9109-xGx-2 Series Electric Non-Spring-Return Actuators Catalog Page
Technical specifications
M9109-xGx-2 Series Electric Non-Spring-Return Actuators
Power requirement AGx: AC 20 to 30 V at 50/60 Hz, 2.5 VA supply, Class 2
GGx: AC 20 to 30 V at 50/60 Hz, 3.2 VA supply, Class 2
Control type AGx: floating
GGx: DC 0(2) to 10 V or DC 0(4) to 20 mA proportional
Input signal AGx: AC 20 to 30 V at 50/60 Hz
GGx: DC 0(2) to 10 V or DC 0(4) to 20 mA
Input signal adjustments: AGx: CW and COM terminals, CW rotation; CCW and COM terminals, CCW rotation
GGx (voltage input or current input):
Jumper selectable: DC 0(2) to 10 V or DC 0(4) to 20 mA
Factory setting: DC 0 to 10 V, CW rotation with signal increase
Action is jumper selectable direct (CW) or reverse (CCW) with signal increase.
Input impedance AGx: 200 ohms, nominal
GGx: voltage input, 150,000 ohms; current input, 500 ohms
Feedback signal AGF: 10,000 ohm potentiometer, 1 W
GGx: DC 0 to 10 V or DC 2 to 10 V for 90° (10 VDC at 1 mA);
Corresponds to input signal span selection
Auxiliary switch rating xGC: two single-pole, double-throw (SPDT) switches rated at AC 24 V, 1.5 A inductive, 3.0 A
resistive, 35 VA maximum per switch, Class 2
Torque rating 80 lb·in (9 N·m)
Cycle life 100,000 full cycles; 2,500,000 repositions rated at 80 lb·in (9 N·m)
Audible noise rating 35 dBA maximum at 39.4 in. (1 m)
Rotation range Adjustable from 30° to 90°, CW or CCW
Rotation time 60 seconds at 60 Hz and 72 seconds at 50 Hz for 90°
Electrical connection 1/4 in. spade terminals (to order optional pluggable terminal blocks, see Accessories)
Mechanical connection 3/8 in. to 1/2 in. (10 mm to 12.7 mm) round shaft or 3/8 in. (10 mm) square shaft
Enclosure rating NEMA 2, IP32
Ambient operating rating -4°F to 125°F (-20°C to 52°C); 90% RH maximum, noncondensing
Ambient storage rating -40°F to 176°F (-40°C to 80°C); 90% RH maximum, noncondensing
Shipping weight 2.4 lb (1.08 kg)
Compliance United States UL 873 Listed, File E27734, CCN XAPX
Canada CSA C22.2 No. 139 Certified, File LR85083, Class 3221 02
Europe CE Mark - Johnson Controls declares that this product is in compliance with the essential
requirements and other relevant provisions of the EMC Directive 2004/108/EC.
Product warranty
This product is covered by a limited
warranty, details of which can be found at
www.johnsoncontrols.com/buildingswarranty.
Single point of contact
APAC Europe NA/SA
JOHNSON CONTROLS JOHNSON CONTROLS JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT WESTENDHOF 3 507 E MICHIGAN ST
NO. 32 CHANGJIJANG RD NEW DISTRICT 45143 ESSEN MILWAUKEE WI 53202
WUXI JIANGSU PROVINCE 214028 GERMANY USA
CHINA
© 2019 Johnson Controls. All rights reserved. All specifications and other information shown were current
as of document revision and are subject to change without notice.
www.johnsoncontrols.comПозиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.