| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | JCI |
| Код документа | m-tool-catalog-page |
| Група обладнання | M-Tool |
| Сторінок | 1 |
| Мова документа | англійська |
| Розмір файлу | 0.1 МБ |
Текст документа
Code No. LIT-1900046
Issued July 6, 2006
M-Tool
Description ZT PRO programs the Zone Terminal Unit
(ZTU100). GX-9100 Configuration Tool
M-Tool transforms the way you create control
programs the DX-91xx and DX-92xx
strategies by providing a suite of tools with an
controllers, the DT-9100 LCD Display, and the
intuitive and efficient work environment.
XT-9100 and XTM905 Point Expansion
M-Tool is an easy-to-use programming tool for
Modules. DX Commissioning supports
application engineers and facility operators.
DX-91xx/92xx controllers. XTM Configurator
M-Tool consists of two major groups of tools: programs the XTM105/XPx Point Expansion
System Tools and Configuration Tools. Both of Modules.
these groups can be installed independently to
M-Tool comes packaged with the System
support different types of control products.
Configuration Tool/Application and Data
System Tools includes Project Builder, Site Server (SCT/ADS).
Book, M-Pro, and Comm Pro. Project Builder
For important product information, refer to the
develops a control system using N30 Series
M-Tool Product Bulletin (LIT-693050).
supervisory controllers. Site Book defines and
saves site information for N30 networks.
M-Pro creates and downloads applications for
Features
M-Tool CD
the VMA1200 controller. M-Tool includes the • system configuration and project
Variable Air Volume Modular Assembly (VMA) management — defines a network of
Balancing Tool used with a Palm™ compatible controllers and the control points, Selection Chart
handheld device. Comm Pro commissions schedules, calendars, interlock,
Code Number Description
LONMARK® compliant Johnson Controls® applications, and others
• commissioning tools — allow fast MW-MTOOL-0 M-Tool (Includes M-Tool
application specific devices.
Computer-Based Training)
adjustment and commissioning of systems
Configuration Tools includes HVAC PRO, MW-MTOOL-6 M-Tool Upgrade from previous
ZT PRO, GX-9100 Configuration Tool, DX • remote access — allows quick access to release (Includes M-Tool
Commissioning, and XTM Configurator. systems over telephone lines or Wide Area Computer-Based Training)
Networks (WANs) MW-MTCBT-0 M-Tool Computer-Based
HVAC PRO creates control strategies for the • question/answer style application Training package
Air Handling Unit (AHU) controller, Unitary development — provides simple and
(UNT) controller, Variable Air Volume (VAV) consistent definition of tested control
controller, Variable Air Volume Modular strategies
Assembly (VMA1400), Phoenix Fume Hood
• graphical program development — allows
(PHX) controller, N2 Dialer Module (NDM), fully flexible programming for custom
and Terminal Controller (TC) devices. It
applications
provides commissioning tools, data graphing,
and loop tuning.
Technical Specifications
M-Tool
Recommended Computer Platform 500 MHz Pentium® III processor for Microsoft® Windows® 2000 Professional Operating System (OS);
2.6 GHz Pentium 4 processor for Windows XP Professional OS, particularly if also running an M-Series Workstation on
the same computer
Random Access Memory (RAM) 256 MB of RAM recommended for Windows 2000 Professional OS and Windows XP Professional OS
(128 MB RAM minimum for Windows 2000 Professional OS and Windows XP Professional OS)
Hard Disk 40 gigabyte (GB) hard disk. If also running an M-Series Workstation on the same computer, we recommend that you
maintain 600 MB of free space for virtual memory.
CD-ROM 4X or higher speed
Monitor 17-inch monitor with 1024 x 768 resolution
Video Memory 2 MB of VRAM
Operating System Windows 2000 Professional OS with Service Pack 4 or
Windows XP Professional OS with Service Pack 1
Hardware Options Windows OS supported printer
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2006 Johnson Controls, Inc. www.johnsoncontrols.com
1 of 1Позиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.