SiemensETIJohnson ControlsIFMSICKWIKABosch RexrothELKO EPHYUNDAIABBVEGAKSR KUEBLERAlfa Laval

LN Series Remote Input/Output (I/O) Controller Product Bulletin

Вид документаБюлетень виробу
ВиробникJCI
Код документаln-series-remote-input-output-i-o-controller-product-bulletin
Група обладнанняLN Controller
Сторінок6
Мова документаанглійська
Розмір файлу0.2 МБ

Текст документа

LN Series Remote Input/Output (I/O) Modules
Product Bulletin
                                                                                           Code No. LIT-12011316
LN-IO301-1, LN-IO401-1, LN-IO520-1                                                            Issued June 5, 2012
                                                                                     Supersedes November 9, 2007

The LN Series Remote Input/Output (I/O) Modules
extend the capability of the LN Series system as well
as monitor and control various Heating, Ventilating,
and Air Conditioning (HVAC) applications.
The LN Remote I/O Modules are based on
LONWORKS® technology for interoperability and
peer-to-peer communication between controllers
without any intermediary. This configuration also
facilitates seamless integration into the Metasys®
system.

                                                                        Figure 1: LN-IO520-1 Module

Table 1: Features and Benefits
 Features                                        Benefits
 Configurable Software                           Features an LNS® plug-in that provides easy configuration of inputs and
                                                 outputs. You can also configure input and output properties and
                                                 hardware Simple Network Variable Types (SNVTs).
 Robust Hardware                                 Features a light-weight, fire-retardant plastic enclosure; software
                                                 configurable universal inputs; Pulse Width Modulation (PWM) or digital
                                                 triac outputs; a status indicator on each output; and a fuse-protected
                                                 power supply.
 Interoperability                                Features peer-to-peer communication between controllers based on
                                                 LONWORKS technology. The Remote I/O Modules are LONMARK®
                                                 certified according to the Interoperability Guidelines Version 3.4.

                                             LN Series Remote Input/Output (I/O) Modules Product Bulletin                  1
LN Remote I/O Module Overview                             Easily configure all of the devices’ parameters,
                                                          including inputs, outputs, heating and cooling set
You can configure the Remote I/O Module by using
                                                          shedding, flow calibration, frost protection, slave
LNS based software, such as LN-Builder. The LN-
                                                          operation mode, points, variable airflow, and PID
Builder configuration interface is designed to simplify
                                                          control loops. You can also enable and configure built-
the configuration of input and output properties, for
                                                          in features such as load shedding, flow calibration,
example, input types, input minimum/input maximum
                                                          frost protection, and slave operation mode.
values, output types, and network variable types.
LNS LN-Configure Plug-in                                  Dimensions
This powerful and intuitive LNS plug-in provides          Figure 2 shows the dimensions for the LN-IO301-1
customization of hardware I/O, control sequences, and     module. Figure 3 shows the dimensions for the
communication schemes.                                    LN-IO401 and LN-IO520-1 modules.

                                Figure 2: LN-IO301-1 Module Dimensions, mm (in.)

2     LN Series Remote Input/Output (I/O) Modules Product Bulletin
                        Figure 3: LN-IO401-1 and IO520-1 Module Dimensions, mm (in.)

Output Configuration and Remote I/O                         Table 4: LN-IO520-1
Controller Selection Guide                                   Inputs                    16
The LN Remote I/O Modules comprise three different           Outputs                   0
devices, each having its own output configuration, but       Wizard                    LNS Plug-in
all having identical input, power, environmental and
general specifications.
Table 2: LN-IO301-1
 Inputs                     8
 Outputs                    8 Digital
                            Triac 1.0 A at 24 VAC
                            External power supply
                            PWM output: adjustable
                            period from
                            2 seconds to 15 minutes
 Output Resolution          12-bit digital/analog
                            converter

Table 3: LN-IO401-1
 Inputs                     12
 Outputs                    12 Digital
                            Triac 1.0 A at 24 VAC
                            External power supply
                            PWM output: adjustable
                            period from 2 seconds to 15
                            minutes
 Output Resolution          12-bit digital/analog
                            converter

                                               LN Series Remote Input/Output (I/O) Modules Product Bulletin   3
LONMARK Objects and Network Variables
Figure 4 shows the LONMARK Objects and Network
Variables.

             Figure 4: GPI LONMARK Objects and Network Variables – LN Remote I/O Modules

4    LN Series Remote Input/Output (I/O) Modules Product Bulletin
Technical Specifications
LN Series Remote I/O Modules (Part 1 of 2)
Product Codes       LN-IO301-1, LN-IO401-1, LN-IO520-1
Power Requirement   Voltage: 24 VAC/DC; ±15%, 50/60 Hz, Class 2
                    Protection: 1.35 A auto-reset fuse
                    Power Consumption: 6 VA
                    Maximum Consumption: 15 VA
Environmental       Operating Temperature: 0–50°C, (32–122°F)
                    Storage Temperature: -20–50°C, (-4–158°F)
                    Relative Humidity: 0 to 90% noncondensing
General             Processor: Neuron® 3150™, 8 bits, 10 MHz
                    Memory: Nonvolatile Flash 64k (APB application), Nonvolatile Flash 64k (storage)
                    Media Channel: TP/FT-10; 78 Kbps
                    Communication: LonTalk® protocol
                    Transceiver: FTX-1
                    Channel: TP/FT-10; 78 Kbps
                    Status Indicator: Green LED: power status and LON TX
                                      Orange LED: service and LON RX
                    Communication Jack: LON audio jack mono 1/8 in. (3.5 mm)
Enclosure           Material: ABS type PA-765A
                    Dimensions (with screws): LN-IO301-1: 5.7 x 4.7 x 2.0 in. (144.8 x 119.4 x 50.8 mm);
                    LN-IO401-1/520-1: 7.7 x 4.7 x 2.0 in. (195.6 x 119.4 x 50.8 mm)
                    Shipping Weight: LN-IO301-1: 0.77 lb (0.35 kg), LN-IO401/520: 0.86 lb (0.39 kg)
Inputs              Quantity: universal (software configurable)
                    Input Types:
                       Digital: Dry Contact
                       Analog Voltage: 0 to 10 VDC
                       Analog current: 4 to 20 mA with 249 ohms external resistor (wired in parallel)
                       Resistor Support:
                        Thermistor: Types 2, 3 (10k ohms at 25°C; 77°F)
                        Range: -40 to 150°C, (-40 to 302°F)
                        Platinum: Pt1000 (1K ohm at 0°C; 32°F)
                        Range: -40 to 150°C, (-40 to 302°F)
                        PT100: (100 ohms at 0°C; 32°F)
                        Range: -40 to 135°C; -40 to 275°F
                        Potentiometer: Translation table configurable on several points
                     Input Resolution: 16 bit analog/digital converter
Electromagnetic     CE: Emission: EN55022: 1998 class B
Compatibility           Immunity: EN61000-4-2: 1995, level 3 in air
                                   EN61000-4-2: 1995, level 2 by contact
                                   EN61000-4-3: 1996, level 2
                                   EN61000-4-4: 1995, level 2
                                   EN61000-4-6: 1996, level 2
                                   ENV 50204: 1995, level 2
                    FCC: This device complies with FCC rules part 15, subpart B, class B

                                            LN Series Remote Input/Output (I/O) Modules Product Bulletin   5
LN Series Remote I/O Modules (Part 2 of 2)
 Compliance                  United States: UL Listed: UL916 Energy management equipment
                             Material1: UL94-5VA
                             Canada: UL Listed: UL916 Energy management equipment
                             Material1: UL94-5VA
                             Europe: CE Mark – Johnson Controls, Inc., declares that the products are in compliance with the
                             essential requirements and other relevant provisions of the EMC Directive
                             2004/108/EC.

1.   All materials and manufacturing processes comply with the directive on the Waste Electrical and Electronic Equipment
     (WEEE).

 The performance specifications are nominal and conform to acceptable industry standard. For application at conditions beyond these
 specifications, consult the local Johnson Controls® office. Johnson Controls, Inc. shall not be liable for damages resulting from
 misapplication or misuse of its products.

North American Emissions Compliance
United States
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference, in which case the user will be required to correct the interference at his/her own expense.

Canada
This Class (A) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (A) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
The term IC before the certification/registration number only signifies that the Industry Canada technical specifications were met.

                                                                                                                     Building Efficiency
                                                                                            507 E. Michigan Street, Milwaukee, WI 53202
                                             Metasys® and Johnson Controls® are registered trademarks of Johnson Controls, Inc.
                                    All other marks herein are the marks of their respective owners. © 2012 Johnson Controls, Inc.

6       LN Series Remote Input/Output (I/O) Modules Product Bulletin

Published in U.S.A.                                                                                                www.johnsoncontrols.com

Позиції каталогу з цим документом

Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.