| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | JCI |
| Код документа | ln-series-remote-input-output-i-o-controller-catalog-page |
| Група обладнання | LN Controller |
| Сторінок | 2 |
| Мова документа | англійська |
| Розмір файлу | 0.1 МБ |
Текст документа
Code No. LIT-1900463
Issued November 9, 2007
LN-IO301-1, LN-IO401-1, LN-IO520-1
LN Series Remote Input/Output (I/O) Controller
Description • robust hardware - features a light-weight
fire retardant plastic enclosure, software
The LN Series Remote Input/Output (I/O)
configurable universal inputs, Pulse Width
controller extends the capability of the LN
Modulation (PWM) or digit triac outputs, a
Series system as well as monitors and
status indicator on each output, and a
controls various Heating, Ventilating, and Air
fuse-protected power supply.
Conditioning (HVAC) applications.
• configurable software - features an LNS®
The LN Remote I/O controllers are based on plug-in that provides the ability to easily
LONWORKS® technology for interoperability configure inputs and outputs. You can also
and peer-to-peer communication between configure input and output properties and
controllers without any intermediary but also hardware Simple Network Variable Types
integrate seamlessly into the Metasys® (SNVTs).
system.
Refer to the LN Series Remote Input/Output Repair Information
(I/O) Controller Product Bulletin If the Remote I/O controller fails to operate
(LIT-12011316) for important product within its specifications, replace the unit. For a LN-IO520-1 Controller
application information. replacement, contact the nearest
Johnson Controls® representative.
Features
• interoperability - features peer-to-peer
communication between controllers based
on LONWORKS technology. The Remote
I/O controller is LONMARK® certified
according to the Interoperability Guidelines
Version 3.4.
Selection Chart
Code Number Description
LN-IO301-1 Controller features 8 inputs, 8 digital outputs, and a 12-bit digital/analog converter for output resolution.
LN-IO401-1 Controller features 12 inputs, 12 digital outputs, and a 12-bit digital/analog converter for output resolution.
LN-IO520-1 Controller features 16 inputs and an LNS Plug-in
Technical Specifications
LN Series Remote I/O Controllers (Part 1 of 2)
Product Codes LN-IO301-1, LN-IO401-1, LN-IO520-1
Power Requirements Voltage 24 VAC/DC; ±15%, 50/60 Hz, Class 2
Protection 1.35 A auto-reset fuse
Consumption 6 VA
Maximum Consumption 15 VA
Ambient Storage Ambient Operating 0 to 70°C (32 to 158° F)
Conditions Temperature
Ambient Storage -20 to 70°C (-4 to 158° F)
Temperature
Ambient Relative Humidity 0 to 90% noncondensing
General Processor Neuron® 3150®, 8 bits, 10 MHz
Memory Nonvolatile Flash 64k (APB application), Nonvolatile Flash 64k (storage)
Channel TP/FT-10, 78 Kbps
Communication LonTalk® protocol
Transceiver FTX-1
Status Indicator Green LED: power status and LON jack, Orange LED: service and LON RX
Communication Jack LON audio jack mono 1/8 in. (3.5 mm)
Enclosure (Housing) Material ABS PA-765A
Dimensions (with screws) LN-IO301-1: 5.7 x 4.7 x 2.0 in. (144.8 x 119.4 x 50.8 mm)
LN-IO401-1 and LN-IO520-1: 7.7 x 4.7 x 2.0 in. (195.6 x 119.4 x 50.8 mm)
Shipping Weight LN-IO301-1: 0.77 lb (0.35 kg), LN-IO401-1 and LN-IO520-1: 0.86 lb (0.39 kg)
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2007 Johnson Controls, Inc. www.johnsoncontrols.com
1 of 2
LN Series Remote Input/Output (I/O) Controller (Continued)
LN Series Remote I/O Controllers (Part 2 of 2)
Inputs Quantity Universal (software configurable)
Input Types Digital: Dry Contact,
Analog Voltage: 0-10 VDC, Accuracy: ±0.5%,
Analog Current: 4-20 mA with 249 ohms external resistor (wired in parallel)
Accuracy: ±0.5%
Resistor Support Thermistor: 100 ohms (PT100), 1k (RTD I K Type 85), 10k (Type, 2, Type 3),
Range: -40 to 125ºC, (-40 to 257º F)
Accuracy: ±0.5º C, ±0.9º F
Resolution: 0.1 to 0.18º F (10k ohms to 10k ohms supported using translation table)
Potentiometer Translation table configurable on several points, Accuracy ±0.5%
Input Resolution 16 bit analog/digital converter
Compliance CE Emission: EN55022: 1998 class B
Immunity: EN61000-4-2: 1995, level 3 in air
EN61000-4-2: 1995, level 2 by contact
EN61000-4-3: 1996, level 2
EN61000-4-4: 1995, level 2
EN61000-4-6: 1996, level 2
ENV 50204: 1995, level 2
United States: UL Listed UL916 Energy management equipment, material: UL94-5VA
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2007 Johnson Controls, Inc. www.johnsoncontrols.com
2 of 2Позиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.