Файл за старою адресою не зберігся. Нижче — документ виробника на те саме обладнання.
| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | JCI |
| Моделі | VG7000, VA-7150-1001, VA-7152-1001, VA-7153-1001, VA-7200-1001, VA-7202-1001, VA-7203-1001, VA-4233 |
| Група обладнання | valves |
| Мова документа | англійська |
| Розмір файлу | 1.1 МБ |
Про документ
Cast bronze control valves for regulating water and steam flow in HVAC systems, available as two-way normally open (PDTC), two-way normally closed (PDTO), and three-way mixing bodies with NPT, union globe, union angle, and union sweat end connections. Factory or field mounted pneumatic actuators (V-3000/V-3801/MP8000 series) and electric actuators (VA-4233, VA-715x, VA-720x, VA-8x2x, VA78x0 series) are offered; a standardized bonnet/stem design allows easy actuator interchangeability.
Ключові дані
| Valve body sizes | 1/2 in. through 2 in. (DN15 through DN50) |
|---|---|
| Cv (Kv) range | 0.73 (0.63) to 46.2 (40.0) |
| Service | Hot Water, Chilled Water, 50/50 Glycol Solutions, or Steam for HVAC Systems |
| Max steam pressure (SS trim) | 100 psig (690 kPa) saturated steam at 338°F (170°C) |
| Max water pressure | 400 psig (2,756 kPa) up to 150°F (66°C) |
| Valve body rating | ANSI B16.15, Class 250 (EN 12360) |
| Rangeability | > 25:1 for 1/2 in., > 100:1 for all other sizes |
| Leakage | Brass trim 0.01% of max flow per ANSI/FCI 70-2, Class 4; SS trim 0.05% |
Застосування
- Regulating flow of hot water, chilled water, 50/50 glycol solutions, and saturated steam in response to a controller demand in Heating, Ventilating, and Air Conditioning (HVAC) systems
Особливості
- Complete family of 1/2 through 2 in. bronze valves with brass and stainless steel trim and several electric and pneumatic actuator styles
- Thousands of easy-to-select factory-assembled ordering matrix combinations
- Standard Johnson Controls Ring Pack packings
- Testing for tight shutoff on every valve
- Standard bonnet and stem design for easy field retrofit, field mounting, and actuator interchangeability via standardized mounting kits
- Equal percentage flow characteristic for two-way; equal percentage or linear for three-way
- Tight shutoff via molded elastomeric disk (brass trim) or machined metal-to-metal seat (stainless steel trim)
- Not to be used on drinking water (contains lead); brass may contain lead per REACH Article 33 / California Prop 65
Технічні дані
| Parameter | Value |
|---|---|
| Service | Hot Water, Chilled Water, 50/50 Glycol Solutions, or Steam for HVAC Systems (Fluid Group 1 according to 67/548/EEC) |
| Valve body size / Cv (Kv) | 1/2 in.: 0.73 (0.63), 1.8 (1.6), 4.6 (4.0); 3/4 in.: 7.3 (6.3); 1 in.: 11.6 (10); 1-1/4 in.: 18.5 (16); 1-1/2 in.: 28.9 (25); 2 in.: 46.2 (40) |
| Valve stroke | 5/16 in. (8 mm) for 1/2 or 3/4 in.; 1/2 in. (13 mm) for 1 or 1-1/4 in.; 3/4 in. (19 mm) for 1-1/2 or 2 in. |
| Valve body rating | Meets requirements of ANSI B16.15, Class 250 (EN 12360) |
| Valve ambient operating temperature limits | 35 to 150°F (2 to 65°C) |
| Max allowable steam pressure/temp — Brass trim | 35 psig (241 kPa) saturated steam at 281°F (138°C) |
| Max allowable steam pressure/temp — SS trim | 100 psig (690 kPa) saturated steam at 338°F (170°C) |
| Water rating — Brass trim | 400 psig (2,756 kPa) up to 150°F (66°C), decreasing to 365 psig (2,515 kPa) at 248°F (120°C) |
| Water rating — SS trim | 400 psig (2,756 kPa) up to 150°F (66°C), decreasing to 308 psig (2,122 kPa) at 338°F (170°C) |
| Leakage — Brass trim | 0.01% of Maximum Flow per ANSI/FCI 70-2, Class 4 |
| Leakage — SS trim | 0.05% of Maximum Flow |
| Inherent flow characteristics | Two-way: equal percentage; three-way mixing: linear |
| Rangeability | > 25:1 for 1/2 in. size, Cv 0.73 valve bodies; > 100:1 for all other valves |
| Spring ranges (pneumatic actuators) | 3 to 6 psig (21 to 41 kPa); 3 to 7 psig (21 to 48 kPa) MP8000 only; 4 to 8 psig (28 to 55 kPa); 9 to 13 psig (62 to 90 kPa) |
| Max recommended steam operating pressure drop | Brass trim: 15 psig (103 kPa); SS trim: 100 psig (690 kPa), all valve sizes |
| Max recommended water operating pressure drop | 35 psig (241 kPa) for 1/2 through 1-1/4 in.; 30 psig (207 kPa) for 1-1/2 and 2 in. |
| Maximum actuator supply pressure (pneumatic only) | 25 psig (172 kPa) |
| Body material | Cast Bronze |
| Bonnet | Brass |
| Brass trim materials | Stem: Stainless Steel; Plug: Brass; Seat: Brass against molded elastomeric disk; Packing: Self-adjusting EPR Ring Pack U-Cups |
| SS trim materials | Stem: Stainless Steel; Plug: Stainless Steel; Seat: Stainless Steel; Packing: Spring-loaded PTFE and elastomer V-rings |
| Fluid temp limits — Brass trim w/ V-3801-8001 & V-3000-8003 | 35 to 248°F (2 to 120°C) water; 15 psig (103 kPa) saturated steam |
| Fluid temp limits — Brass trim w/ MP82 & V-3000-8012 | 35 to 284°F (2 to 140°C) water; 38 psig (262 kPa) saturated steam |
| Fluid temp limits — Brass trim w/ VA-8x2x | 195°F (91°C) max water; not rated for steam |
| Fluid temp limits — Brass trim w/ VA-4233-xGx-2 | 35 to 250°F (2 to 121°C) water; 15 psig (103 kPa) saturated steam |
| Fluid temp limits — Brass trim w/ other electric actuators | 35 to 284°F (2 to 140°C) water; 38 psig (262 kPa) saturated steam |
| Fluid temp limits — SS trim w/ any pneumatic actuator | 35 to 338°F (2 to 170°C) water; 100 psig (690 kPa) saturated steam |
| Fluid temp limits — SS trim w/ VA-4233-xGx-2 | 35 to 250°F (2 to 121°C) water; 15 psig (103 kPa) saturated steam |
| Fluid temp limits — SS trim w/ other electric actuators | 35 to 338°F (2 to 170°C) water; 100 psig (690 kPa) saturated steam |
Варіанти замовлення
Valve code structure (15 fields): VG product family prefix; field 3 = body type (2 = Two-Way N.O./Push-Down-to-Close, 4 = Two-Way N.C./Push-Down-to-Open, 5 = Two-Way Angle N.O./PDTC, 8 = Three-Way Mixing); field 4 = end connections (4 = Threaded NPT, 5 = Union Globe/Angle, 7 = Union Sweat 3/8 in. tubing, 8 = Union Sweat standard tubing, 9 = Union Sweat 3/4 in. tubing); field 6 = trim (1 = Brass Equal Percentage, 2 = Brass Linear three-way, 3 = SS Equal Percentage two-way, 4 = SS Linear three-way); field 7 = size/Cv (C = 1/2 in. 0.73, E = 1/2 in. 1.8, G = 1/2 in. 4.6, L = 3/4 in. 7.3, N = 1 in. 11.6, P = 1-1/4 in. 18.5, R = 1-1/2 in. 28.9, S = 2 in. 46.2); field 8 = stem type (T standard threaded, S slotted/small bonnet, M large threaded). Field-mounting kits:
| Actuator style | Valve size | Mounting kit code number |
|---|---|---|
| T-3x11, V-3000-8012, V-3000-8003 (5/16 in. stroke) | 1/2 or 3/4 (DN15/DN20) | VG7000-10013 (3–6 psig), VG7000-10023 (4–8 psig), VG7000-10033 (9–13 psig) |
| T-3x11, V-3000-8012, V-3000-8003 (1/2 in. stroke) | 1 or 1-1/4 (DN25/DN32) | VG7000-10043 (3–6 psig), VG7000-10053 (4–8 psig), VG7000-10063 (9–13 psig) |
| T-3x11, V-3000-8012, V-3000-8003 (3/4 in. stroke) | 1-1/2 or 2 (DN40/DN50) | VG7000-10073 (3–6 psig), VG7000-10083 (4–8 psig), VG7000-10093 (9–13 psig) |
| V-3801-8001 (5/16 in. stroke) | 1/2 or 3/4 (DN15/DN20) | VG7000-10103 (3–6 psig), VG7000-10113 (4–8 psig), VG7000-10123 (9–13 psig), VG7000-10153 (kit with 3 springs incl. hardware) |
| MP82/MP83 | 1/2 or 3/4 (DN15/DN20) SS trim | MP8000-67014 |
| MP82/MP83 | 1 through 2 (DN25–DN50) w/ 1/4 in. stem, SS or brass trim | MP8000-67024 |
| MP84/MP85 | 1-1/2 through 2 (DN40–DN50) w/ 3/8 in. stem, SS trim | MP8000-67035 |
Electric actuator mounting kits: VA-8x2x requires VA-8020-100 (refit only); VA-4233, VA-715x, VA-720x, VA78x0 require no mounting kit. Accessories include EP-8000 transducers (EP-8000-1, -2, -3, -4, mounting kit EP-8000-101), VA-8000-102 position indicator, VG7000-1016 bonnet adaptor, packing kits VG7000-6001/-6002 (brass trim) and VG7000-6011/-6012 (SS trim).
Допуски та стандарти
- EN 12360 (valve body rating, ANSI B16.15 Class 250)
- Pressure Equipment Directive (PED) 2014/68/EU: Paragraph 4, Comma 3 for 1/2, 3/4, and 1 in. valves (CE marking not applicable); Category 1, Mod. A (CE marked) for 1-1/4, 1-1/2, and 2 in. valves
- CRN: 0C22556.5
Позиції каталогу з цим документом
Текст документа
VG7000 Series Bronze Control Valves
Product Bulletin
VG7000 Series Code No. LIT-977140
Issued May 2021
Supersedes July 2020
VG7000 Series Bronze Control Valves are designed
primarily to regulate the flow of water and steam in
response to the demand of a controller in Heating,
Ventilating, and Air Conditioning (HVAC) systems.
These valves are available in Normally Open (N.O.),
Normally Closed (N.C.), and three-way mixing
configurations. Both electric and pneumatic actuators
are available for factory or field mounting.
This product is made of copper alloy, which
contains lead. The product is therefore not
to be used on drinking water.
This product can expose you to chemicals
including lead, which is known to the State
of California to cause cancer, birth defects,
or other reproductive harm. For more infor-
mation, go to www.P65Warnings.ca.gov.
Figure 1: VG7000 Series Bronze Control Valves
Table 1: Features and benefits
Features Benefits
Complete Family of 1/2 through Offers a broad selection to choose from, including electric spring return actuators, a
2 in. Bronze Valves, Brass and true 1-1/4 in. valve body, a 3/4 in. valve with small oval top actuator, and Stainless
Stainless Steel Trim, with Several Steel (SS) trim capable of 100 psig (690 kPa) saturated steam.
Styles of Electric and Pneumatic
Actuators
Flexible Features and Options Suits your specific application via thousands of easy-to-select, factory-assembled
Ordering Matrix combinations.
Standard Johnson Controls® Provides industry-leading reliability and operating life.
Ring Pack Packings
Testing for Tight Shutoff of Every Provides energy conservation and ensures occupant comfort.
Valve
Standard Bonnet and Stem Design Allows easy field retrofit, easy field mounting, and interchangeability of actuators with
the use of standardized mounting kits.
WARNING: BRASS MAY CONTAIN LEAD
To fulfill our obligations towards Article 33, in accordance to the European REACH Regulation No 1907/2006 EC, we hereby inform you that this article contains
the following Substances of Very High Concern mentioned on the Candidate list:
• Lead
VG7000 Series Bronze Control Valves Product Bulletin
1
Ordering data
Table 2: Ordering Data — VG7000 Series Bronze Control Valves1
V G Valve Global
1 2 7 Product Family 7 = Cast Bronze
3 2 Body Type 2 = Two-Way, Normally Open/Push-Down-to-Close
4 4 = Two-Way, Normally Closed/Push-Down-to-Open
5 = Two-Way Angle, Normally Open/Push-Down-to-Close
8 = Three-Way Mixing
4 End Connections 4 = Threaded National Pipe Thread (NPT)
5 5 = Union Globe/Union Angle (1/2 through 1-1/2 in. Body
Sizes, PDTC Only, Brass Trim Valves Only))
7 = Union Sweat, 3/8 in. Tubing (1/2 in. Body Size Only,
Brass Trim Valves Only))
8 = Union Sweat, Standard Tubing (Brass Trim Valves
Only)
9 = Union Sweat, 3/4 in. Tubing (1/2 in. Body Size Only,
Brass Trim Valves Only))
1 Trim and Flow 1 = Brass Equal Percentage (All Two-Way and 1/2 in.
Characteristics Three-Way)
6 2 = Brass Linear (Three-Way Only)
3 = Stainless Steel Equal Percentage (Two-Way Only)
4 = Stainless Steel Linear (Three-Way Only)
L Size and Cv (Kv) C = 1/2 in., 0.73 Cv (0.63 Kv)
7 E = 1/2 in., 1.8 Cv (1.6 Kv)
G = 1/2 in., 4.6 Cv (4.0 Kv)
L = 3/4 in., 7.3 Cv (6.3 Kv)
N = 1 in., 11.6 Cv (10.0 Kv)
P = 1-1/4 in., 18.5 Cv (16.0 Kv)
R = 1-1/2 in., 28.9 Cv (25.0 Kv)
S = 2 in., 46.2 Cv (40.0 Kv)
T Stem Type T = Standard Threaded Stem (All Except V-3801, MP84,
VA-8x2x)
8 S = Slotted Stem and Small Bonnet (Factory-Mounted
V-3801, VA-8x2x Only; Only Brass Trim Valves)
M = Large Threaded Stem (Factory-Mounted MP84 Only,
Only Stainless Steel Trim Valves)
+ Actuator + = Factory-Mounted Actuator
Mounting (See Table 3 and Table 4.)
9 (Leave Fields 9 through 15 blank for valve without
factory-mounted actuator. Valve without factory-mounted
actuator is available with standard threaded stem only.)
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 = Field
V G 7 2 4 1 L T + Example: Cast bronze valve, two-way, normally open/push-down-to-close,
threaded (NPT) end connections, brass trim, equal percentage,
Valve + Actuator 3/4 in., 7.3 Cv, standard threaded stem.
1. See Table 3 when adding a factory-mounted pneumatic actuator to a valve body. See Table 4 when adding a
factory-mounted electric actuator to a valve body. For valid valve and actuator combinations, see Table 16 and Table 17.
VG7000 Series Bronze Control Valves Product Bulletin
2
Table 3: Ordering Data — Adding a Factory-Mounted Pneumatic Actuator1
V G 7 2 4 3 L T + 3 0 0 8 V-3000/V-3801 3801 = V-3801-8001 Small Oval Top (Slotted Stem Only,
Pneumatic Brass Trim Valves Only, Must be Factory Assembled)
1 2 3 4 5 6 7 8 9 10 11 12 13 Actuator2 3008 = V-3000-8012 Exposed
3003 = V-3000-8003 Enclosed
B Spring Range B = 3 to 6 psig (Suggested for N.O. Valves with Positioner)
(V-3000/V-3801)
14 D = 4 to 8 psig (Suggested for Three-Way Valves with
Positioner)
E = 9 to 13 psig (Suggested for N.C. Valves with
Positioner)
P Accessories P = V-9502 Positioner (Not Available with V-3801-8001 or
(V-3000/V-3801) V-3000-8003)
15 Blank = None
8 2 MP8000 Series 82 = MP82, 25 sq in. Spring-Return-Up (SS or Brass Trim)
Pneumatic
10 11 84 = MP84, 50 sq in. Spring-Return-Up (SS Trim Only)
Actuator2
(Only spring-return-up models of MP8000 Series
Pneumatic Actuators are available factory-mounted to
VG7000 Series Bronze Control Valves.)
1 Stroke 1 = 5/16 in. (1/2 or 3/4 in. Valves with MP82 Actuator Only)
(MP8000
12 Series) 2 = 1/2 in. (1 or 1-1/4 in. Valves with MP82 Actuator Only)
3 = 3/4 in. (1-1/2 or 2 in. Valves with MP82 or MP84
Actuator)
C Spring Range C = 3 to 7 psig (Suggested for N.O. Valves with Positioner)
(MP8000
13 Series) D = 4 to 8 psig (Suggested for Three-Way Valves with
Positioner)
E = 9 to 13 psig (Suggested for N.C. Valves with
Positioner)
0 1 Accessories 00 = None
(MP8000
14 15 Series) 01 = V-9502 Positioner
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 = Field
V G 7 2 4 3 L T + 8 2 1 C 0 1 Example: Cast bronze valve, two-way, normally open, threaded (NPT) end
connections, stainless steel trim, equal percentage, 3/4 in., 7.3 Cv, standard
Valve + Actuator threaded stem, MP82 Series Pneumatic Actuator, 5/16 in. stroke, 3 to 7 psig
(21 to 48 kPa) spring range, with factory-mounted V-9502 Positioner.
1. See Table 2 when ordering a valve body only. See Table 4 when adding a factory-mounted electric actuator to a valve body.
For valid valve and actuator combinations, see Table 16 and Table 17.
2. Refer to the actuator product bulletin or product/technical bulletin.
VG7000 Series Bronze Control Valves Product Bulletin
3
Table 4: Ordering Data — Adding a Factory-Mounted Electric Actuator1
V G 7 2 4 1 L T + 7 1 5 0 VA-7150/ 7150 = VA-7150-1001 On/Off (Floating)
VA-7200
1 2 3 4 5 6 7 8 9 10 11 12 13 Electric 7152 = VA-7152-1001 Proportional, 0-10 VDC
Actuator2, 3 7153 = VA-7153-1001 On/Off (Floating), Feedback
7200 = VA-7200-1001 On/Off (Floating)
7202 = VA-7202-1001 Proportional, 0-10 VDC
7203 = VA-7203-1001 On/Off (Floating), Feedback
G Voltage G = 24 VAC
(VA-7150/
14 VA-7200)
Accessories Blank = None
(VA-7150/
15 VA-7200)
4 2 3 VA-4233 Spring Return Up
Electric
10 11 12 423 = VA-4233-xGx-2, 24 VAC/VDC
Actuator2
A G A Features BGA = On/Off
13 14 15 (VA-4233)4 BGC = On/Off, 2 Auxiliary Switches
GGA = Prop., 0-10 VDC, Feedback
GGC = Prop., 0-10 VDC, Feedback, 2 Auxiliary Switches
9 2 N VA7810 Non-Spring Return
VA7820/
10 11 12 71C = VA7810-xGx-2, 24 VAC/VDC
VA78305
Electric Spring Return
Actuator2,6
72C = VA7820-HGx-2, Spring-Return Stem Up 24 VAC
74C = VA7830-HGx-2, Spring-Return Stem Down 24 VAC
G G A Features HGA = Proportional, 0-10 VDC, Feedback
13 14 15 (VA78x0)7 HGC = Proportional, 0-10 VDC, Feedback, 2
8 0 2 0 VA-8x2x 8020 = VA-8020-1, On/Off (Floating)
Electric
10 11 12 13 8122 = VA-8122-1, Proportional
Actuator2,3, 8
G Voltage G = 24 VAC
(VA-8x2x)
14
Accessories Blank = None
(VA-8x2x)
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 = Field
V G 7 2 4 1 L T + 8 0 2 0 G Example: Cast bronze valve, two-way, push-down-to-close, threaded (NPT)
end connections, brass trim, equal percentage, 3/4 in., 7.3 Cv, standard
Valve + Actuator threaded stem, VA-8020-1 On/Off (Floating) Electric Actuator, 24 VAC supply.
1. See Table 2 when ordering a valve body only. See Table 3 when adding a factory-mounted pneumatic actuator to a valve body.
For valid valve and actuator combinations, see Table 16 and Table 17.
2. Refer to the actuator product bulletin or product/technical bulletin.
3. Available only for PDTC Two-Way and Three-Way body styles.
4. Available only for NPT (threaded) and Union Sweat End Connections body style.
5. VA7830 actuator is available only on Three-Way Mixing body style.
6. Available only for NPT (threaded) body style.
7. VA7820 and VA7830 Proportional Control Actuators have selectable switches for field conversion to On/Off or Floating Control.
8. Available only for 1/2 and 3/4 in. valves.
VG7000 Series Bronze Control Valves Product Bulletin
4
Application overview Pneumatic Actuator Selection
See Table 7, Table 9, Table 11, and Table 16.
IMPORTANT: The VG7000 Series Bronze Control
Valves are intended to control saturated steam, hot Do not confuse the V-3000-8012, V-3000-8003, and
water, and chilled water flow under normal V-3801-8001 Pneumatic Actuators with the V-3000-1,
equipment operating conditions. Where failure or V-3000-2, and V-3802-1 Pneumatic Actuators. Refer to
malfunction of the VG7000 Series Valve could lead the V-3000-8011 (Exposed) and V-3000-8003
to personal injury or property damage to the (Enclosed) Pneumatic Valve Actuators Product/
controlled equipment or other property, additional Technical Bulletin (LIT-977252) for specifics regarding
precautions must be designed into the control interchangeability. The V-3801-8001 is not a direct
system. Incorporate and maintain other devices, replacement for the V-3802-1 because V-3802-1 is not
such as supervisory or alarm systems or safety or compatible with VG7000 Series Valves.
limit controls, intended to warn of or protect against
V-3801-8001 Pneumatic Actuator
failure or malfunction of the VG7000 Series Valve.
The V-3801-8001 is a low force, oval top actuator
VG7000 Series Bronze Control Valves feature brass designed specifically for 1/2 and 3/4 in. valves where
and stainless steel trim, and are available in two-way mounting space is restricted. The V-3801-8001 has
configurations with Push-Down-to-Close (PDTC) sufficient force to handle most seating pressures, and
(normally open if pneumatic or spring return) or the molded diaphragm design provides a constant
Push-Down-to-Open (PDTO) (normally closed if effective area (4 sq in.) throughout the valve stem
pneumatic or spring return) with threaded (NPT), union stroke. Due to the simplicity of the design, it is more
sweat, union globe, and union angle end connections. economical to replace the actuator than repair it. The
The valve can be ordered with a variety of pneumatic actuator assembly can be removed or repositioned by
actuators: V-3000-8012 (exposed, with or without a loosening a single set screw without disturbing the rest
factory-mounted positioner), V-3000-8003 (enclosed), of the valve assembly.
V-3801-8001 (oval top), and higher force MP8000 Because the V-3801-8001 uses a unique slotted valve
Series Actuators (with or without a factory-mounted stem for factory assembly (see the Stem Type section
pneumatic positioner). in Table 2), the spring kits available are for field
VG7000 Series Valves can also be ordered with any of mounting to standard threaded stem valves. See
the following series electric actuators: VA-4233, Table 7 for mounting kit code numbers.
VA-7150, VA-7200, VA-8x2x, VA7810, VA7820, or V-3000-8012 Pneumatic Actuator
VA7830. All electric actuators are fully compatible with
The V-3000-8012 is a versatile, medium-force
Johnson Controls® controllers, reducing installation
pneumatic actuator that can be used in most HVAC
costs. Valves without actuators can be ordered with the
applications, including sequential control of valves. See
standard bonnet and threaded stem design, allowing
Table 9 and Table 11 for actuator sizing and selection.
easy interchangeability of actuators with the use of
standardized mounting kits. See Table 2 through The permanently captured, molded rolling diaphragm
Table 4 for ordering data and additional details. For of the V-3000-8012 provides a constant effective area
valid valve and actuator combinations, see Table 16 (8 sq in.) throughout the valve stem stroke. The
and Table 17. actuator assembly can be removed or repositioned by
The modulating valve plug of VG7000 Series Valves loosening a single set screw without disturbing the rest
provides an equal percentage flow characteristic for of the valve assembly.
two-way valves, and equal percentage or linear for The V-9502 Pneumatic Positioner is also available for
three-way valves. Tight shutoff is ensured using a factory or field mounting to the V-3000-8012.
molded elastomeric disk in valves with brass trim, and
a precisely machined metal-to-metal seat for valves V-3000-8003 Pneumatic Actuator
with stainless steel trim. An arrow is cast on one side of The V-3000-8003, operationally similar to the
the valve body indicating the direction of flow for proper V-3000-8012, is designed for enclosed installation in a
piping. location where the actuator might be subjected to
tampering. The V-3000-8003 has a replaceable molded
diaphragm design.
VG7000 Series Bronze Control Valves Product Bulletin
5
MP8000 Series Pneumatic Actuators Electric Actuator Selection
The higher force MP82 (25 sq in. effective diaphragm Factory-mounted electric actuators are available on
area) and MP84 (50 sq in. effective diaphragm area) two-way PDTC and three-way mixing valve
Pneumatic Actuators are used where higher maximum configurations only. Actuators can be easily field
closeoff pressures are required, such as 1-1/2 and 2 in. reversed if required. The actuators can be field
brass trim valves and 1/2 through 2 in. stainless steel mounted on PDTO valves if desired. All proportional
trim valves. electric actuator assemblies are factory calibrated for
These actuators are equipped with a molded synthetic nominal 0 to 10 VDC operation, to drive down with an
rubber diaphragm contained in a sturdy, carbon-steel increase in signal. The VA-4233 and VA78x0 are
housing that protects it against dirt and damage. The available on all valve styles: PDTO, PDTC, and three-
actuator can be easily removed to perform inline way.
servicing to all parts of the valve. The MP8000 VA-4233 Series Electric Actuators
Actuators are available factory mounted or are easily
The VA-4233 Series Electric Actuators use a stepper
field mounted to VG7000 Series Valves. See Table 7
motor to accurately position the valve. In the event of a
for the appropriate mounting kit.
power failure, a spring in the actuator automatically
The MP8000 Actuators are designed to allow for returns the valve to the full stem-up position. These
reversing the action of the actuators in the field. If direct-mount, spring return electric actuators provide a
desired, the action of the MP8000 on Normally Open minimum 61 lb force output for floating, on/off, or
(N.O.) valves can be reversed from spring-return-up to proportional control, and can be factory mounted to
spring-return-down or vice versa. To field reverse the 1/2 through 1-1/4 in. valve bodies with NPT (threaded)
actuator, refer to the MP8000 Pneumatic Valve and union sweat end connections.
Actuators Technical Bulletin (LIT-977258).
Integral auxiliary switches are available for indicating
The V-9502 Pneumatic Positioner is also available for end stop position or to perform switching functions. On
factory or field mounting to MP8000 Series Pneumatic proportional models, position feedback is also available
Valve Actuators. through a proportional DC voltage signal. All models
feature a hand crank for manual positioning of the
T-3000 Valve Top Thermostat Actuators valve, independent of a power supply.
The T-3111 and T-3311 Series Valve Top Thermostat
Actuators are available for field mounting to all VG7000 VA-7150 Series Electric Actuators
Series Valves (N.O., N.C., and three-way). The valve The VA-7150 Series Actuators use a reversible
top thermostats are a combination of a pneumatic synchronous motor and magnetic clutch to accurately
thermostat and a pneumatic valve actuator. The T-3111 position the valve. This non-spring return actuator has
and T-3311 are available in both direct and reverse a 90 lb force output. The magnetic clutch maintains a
acting models with various features and options. Refer constant load at the end of travel, ensuring tight valve
to the T-3111 Integral Thermostat and Piston Top Valve shutoff and automatically compensating for seat wear.
Actuator Single Temperature, Single Pressure Product/
This actuator is available in three models: floating
Technical Bulletin (LIT-7171137) and the T-3311
three-wire (VA-7150), floating with 0 to 2000 ohm
Integral Thermostat and Piston Top Valve Actuator
feedback (VA-7153), or 0 to 10 VDC proportional
Dual Temperature, Dual Pressure Product/Technical
control (VA-7152).
Bulletin (LIT-7171152) for specifications and ordering
information. VA-7200 Series Electric Actuators
Note: A mounting kit is required to field mount T-3111 The VA-7200 Series Actuators use a reversible
or T-3311 Valve Top Thermostats to a valve. See synchronous motor and a magnetic clutch to accurately
Table 7 for the appropriate mounting kit code number. position the valve. This non-spring return actuator has
a 180 lb force output. The magnetic clutch maintains a
constant load at the end of travel, which ensures tight
shutoff and automatically compensates for seat wear.
This actuator is available in three models: floating
three-wire (VA-7200), floating with 0 to 2000 ohm
feedback (VA-7203), or 0 to 10 VDC (0 to 20 mA)
proportional control (VA-7202).
VG7000 Series Bronze Control Valves Product Bulletin
6
VA-8x2x Series Electric Actuators The actuator delivers a minimum stem force of 180 lb.
The VA-8x2x Series Actuators are synchronous Integral auxiliary switches are available for indicating
motor-driven, force sensor limited, non-spring return end-stop position or to perform switching functions. For
actuators that feature a 22 lb seating force in a proportional models a 0 (2) to 10 VDC signal feedback
compact design. The VA-8020 accepts floating control is available.
from a three-wire, 24 VAC control signal. The VA-8122 VA7820/VA7830 Series Electric Actuators
typically accepts proportional control from a 0 to
The VA7820/VA7830 Series is a line of motor driven,
10 VDC control signal; however, it can be field adjusted
direct mount, spring return actuators that operate on
to accept signals up to 20 VDC. In addition, the
24 VAC. The actuators ship already set for 0 to 10 VDC
VA-8122 features an input signal reversing feature that
Proportional control. With a simple change of DIP
allows it to be used in both heating and cooling
switch settings, the actuator can be reconfigured in the
applications.
field for On/Off (Floating) Control. Position feedback is
Note: The VA-8x2x is only available factory mounted available via switches or a 0 (2) to 10 VDC signal. The
on 1/2 and 3/4 in. valves. Because the VA-8x2x actuator delivers a minimum stem force of 180 lb. If the
requires a unique slotted valve stem for factory power fails, the automatic spring returns the valve stem
assembly, it is necessary to select the S option in the up for the VA7820 actuator or the valve stem down for
Stem Type section of Table 2. the VA7830 actuator. A manual override allows manual
positioning of the valve when power is not available.
VA7810 Series Electric Actuators The actuator is available factory mounted to 1/2
The VA7810 Series is a line of motor driven, direct through 2 in. valve body styles with NPT (threaded)
mount, non-spring return actuators that operate on end connections with stainless steel trim and factory
24 VAC and are available for use with on/off (floating) mounted to 1 through 2 in. valve body styles with NPT
or proportional controllers. The actuator is available (threaded) end connections with brass trim. The
factory mounted to 1/2 through 2 in. valve body styles actuator is available separately for field mounting to
with NPT (threaded) end connections with stainless union sweat, union globe, and union angle VG7000
steel trim and factory mounted to 1 through 2 in. valve Series valves.
body styles with NPT (threaded) end connections with
brass trim. The actuator is available separately for field
mounting to union sweat, union globe, and union angle
VG7000 Series valves.
VG7000 Series Bronze Control Valves Product Bulletin
7
Shipping weights
Table 5: Shipping Weights for Brass Trim Valves1
Actuator Valve Weight, lb
1/2 3/4 1 1-1/4 1-1/2 2
V-3801-8001 2.5 3.1 --- --- --- ---
V-3000-8012 3.4 4.5 6.5 6.5 12.1 17.2
V-3000-8003 3.2 4.3 6.3 6.2 11.9 17.0
MP82 --- --- 14.0 16.0 19.0 24.0
MP84 --- --- --- --- --- ---
VA-4233 5.3 6.4 8.4 8.3 --- ---
VA-7150 3.9 5.0 7.0 6.9 12.6 17.7
VA-7200 --- --- 7.5 7.4 13.1 18.2
VA-8x2x 4.6 5.9 --- --- --- ---
VA7810 --- --- 6.2 6.2 11.8 16.9
VA7820/ --- --- 7.9 7.9 13.5 18.6
VA7830
1. Weights are approximate and based on the heaviest valve. Add 2 lb (0.9 kg) for pneumatic assemblies with a positioner.
Table 6: Shipping Weights for Stainless Steel Trim Valves1
Actuator Valve Weight, lb
1/2 3/4 1 1-1/4 1-1/2 2
V-3000-8012 3.7 4.5 6.9 8.9 --- ---
V-3000-8003 3.5 4.2 6.7 8.7 --- ---
MP82 11.0 12.0 14.0 16.0 19.0 24.0
MP84 --- --- --- --- 32.0 37.0
VA-4233 5.3 5.6 8.0 10.0 --- ---
VA-7150 3.9 4.2 6.6 8.6 12.6 17.7
VA-7200 4.7 5.5 7.9 9.9 13.1 18.2
VA7810 3.1 4.2 6.6 8.6 11.8 16.9
VA7820/ 4.8 5.9 8.3 10.3 13.5 18.6
VA7830
1. Weights are approximate and based on the heaviest valve. Add 2 lb (0.9 kg) for pneumatic assemblies with a positioner.
VG7000 Series Bronze Control Valves Product Bulletin
8
Field mounting
A standard bonnet/stem design allows for easy field
mounting of actuators. See Table 2 to order valves
without actuators; Table 7, and Table 8 to order the
appropriate mounting kits; and Table 16 and Table 17
to identify compatible actuators. Refer to the
appropriate actuator product bulletin for specific
actuator code number information.
Table 7: Field Mounting Kits for Pneumatic Actuators1
Actuator Style Valve Size, in. (DN)2 Spring Range psig (kPa) Mounting Kit
Code Number
T-3x11 1/2 or 3/4 (DN15 or DN20) 3 to 6 (21 to 41) VG7000-10013
V-3000-8012 5/16 in. (8 mm) Stroke
4 to 8 (28 to 55) VG7000-10023
V-3000-8003
9 to 13 (62 to 90) VG7000-10033
T-3x11 1 or 1-1/4 (DN25 or DN32) 3 to 6 (21 to 41) VG7000-10043
V-3000-8012 1/2 in. (13 mm) Stroke
4 to 8 (28 to 55) VG7000-10053
V-3000-8003
9 to 13 (62 to 90) VG7000-10063
T-3x11 1-1/2 or 2 (DN40 or DN50) 3 to 6 (21 to 41) VG7000-10073
V-3000-8012 3/4 in. (19 mm) Stroke
4 to 8 (28 to 55) VG7000-10083
V-3000-8003
9 to 13 (62 to 90) VG7000-10093
V-3801-8001 1/2 or 3/4 (DN15 or DN20) 3 to 6 (21 to 41) VG7000-10103
5/16 in. (8 mm) Stroke
4 to 8 (28 to 55) VG7000-10113
9 to 13 (62 to 90) VG7000-10123
V-3801-8001 1/2 or 3/4 (DN15 or DN20) Kit with Three Springs: VG7000-10153
5/16 in. (8 mm) Stroke 3 to 6, 4 to 8, and 9 to 13 (Includes
hardware to adapt one valve only.)
MP82/MP83 1/2 or 3/4 (DN15 or DN20) with Stainless Not Applicable MP8000-67014
Steel Trim
MP82/MP83 1 through 2 (DN25 through DN50) with 1/4 in. Not Applicable MP8000-67024
Stem and Stainless Steel or Brass Trim
MP84/MP85 1-1/2 through 2 (DN40 through DN50) with Not Applicable MP8000-67035
3/8 in. Stem and Stainless Steel Trim
1. Use all mounting kits with valves with standard threaded stem design only.
2. DN is the European designation for body size in metric units (mm).
3. The mounting kits include: upper spring seat, spring, stem extension, stem locking screw (or set screw), and a
bonnet adaptor for the V-3801-8001. Use this only on valves with threaded stems.
4. The mounting kits include: stem nut (1), stem extender nuts (2), stem extender (1), and yoke nut (1).
5. The mounting kit includes: stem nuts (2) and yoke nut (1).
Table 8: Field Mounting Kits for Electric Actuators1
Actuator Style Valve Size, in. (DN) Mounting Kit Code Number
VA-4233 1/2 through 1-1/4 (DN15 through DN32) None Required
VA-715x 1/2 through 2 (DN15 through DN50) None Required
VA-720x 1 through 2 (DN25 through DN50) for valves with brass trim None Required
VA-8x2x 1/2 and 3/4 in. (DN15 and DN20) VA-8020-100 (Refit only)
VA78x0 1 through 2 (DN25 through DN50) for valves with brass trim None Required
1. Use all mounting kits with valves with standard threaded stem design only.
VG7000 Series Bronze Control Valves Product Bulletin
9
C C
N.C.
(PDTO)
N.C.
(PDTO)
N.O.
(PDTC)
N.O.
(PDTC)
Stem Up Position Stem Down Position
FIG:VG7FG02P
With the stem in the up position, With the stem in the down position,
the lower port (N.O.) is open the inline port (N.C.) is open
to the Common port (C). to the Common port (C).
Figure 2: Three-Way Mixing Valves Fluid Flow Direction and Port Designation
Table 9: Brass Trim – Maximum Closeoff Pressures, psig (kPa) for Pneumatically Actuated Valves (Part 1
of 2)
Actuator Valve Size, Maximum Two-Way Normally Open or Two-Way Normally Closed or
Style in. (DN) Cv (Kv) Three-Way N.O. Port Three-Way N.C. Port
Brass Trim Factor (with 20 psig Supply) (with 0 psig Supply)
Spring Range (psig)1 Spring Range (psig)1
3 to 62 4 to 8 9 to 13 3 to 62 4 to 8 9 to 13
(21 to 41) (28 to 55) (62 to 90) (21 to 41) (28 to 55) (62 to 90)
V-3801-8001 1/2 0.73 186 157 84 37 57 158
(248°F (DN15) (0.63) (1,282) (1,082) (579) (255) (393) (1,089)
[120°C])
1.8 186 157 84 37 57 158
(1.6) (1,282) (1,082) (579) (255) (393) (1,089)
4.6 105 89 48 18 28 76
(4.0) (723) (613) (331) (124) (193) (524)
3/4 7.3 67 56 30 11 16 45
(DN20) (6.3) (462) (386) (207) (76) (110) (310)
VG7000 Series Bronze Control Valves Product Bulletin
10
Table 9: Brass Trim – Maximum Closeoff Pressures, psig (kPa) for Pneumatically Actuated Valves (Part 2
of 2)
Actuator Valve Size, Maximum Two-Way Normally Open or Two-Way Normally Closed or
Style in. (DN) Cv (Kv) Three-Way N.O. Port Three-Way N.C. Port
Brass Trim Factor (with 20 psig Supply) (with 0 psig Supply)
Spring Range (psig)1 Spring Range (psig)1
3 to 62 4 to 8 9 to 13 3 to 62 4 to 8 9 to 13
(21 to 41) (28 to 55) (62 to 90) (21 to 41) (28 to 55) (62 to 90)
V-3000-8012 1/2 0.73 365 339 191 100 142 348
(284°F (DN15) (0.63) (2,515) (2,336) (1,316) (689) (978) (2,398)
[140°C])
1.8 365 339 191 100 142 348
and
(1.6) (2,515) (2,336) (1,316) (689) (978) (2,398)
V-3000-8003
(248°F 4.6 225 192 108 49 68 168
[120°C]) (4.0) (1,550) (1,323) (744) (338) (469) (1,158)
3/4 7.3 144 122 69 29 41 100
(DN20) (6.3) (992) (841) (475) (200) (282) (689)
1 11.6 90 76 42 17 25 65
(DN25) (10) (620) (524) (289) (117) (172) (448)
1-1/4 18.5 55 47 26 10 14 37
(DN32) (16) (379) (324) (179) (69) (96) (255)
1-1/2 28.9 35 30 16 6 9 23
(DN40) (25) (241) (207) (110) (41) (62) (158)
2 46.2 22 19 11 4 6 14
(DN50) (40) (152) (131) (76) (28) (41) (96)
MP82 1 11.6 279 257 148 70 96 223
(284°F (DN25) (10) (1,924) (1,772) (1,020) (483) (662) (1,536)
[140°C])
1-1/4 18.5 170 157 90 40 55 128
(DN32) (16) (1,172) (1,082) (621) (276) (379) (883)
1-1/2 28.9 109 100 58 25 34 79
(DN40) (25) (752) (689) (400) (172) (234) (545)
2 46.2 70 64 37 16 21 50
(DN50) (40) (483) (441) (255) (110) (145) (345)
1. The recommended spring ranges for use with a V-9502 Positioner are: 3 to 6 psig (21 to 41 kPa) and 3 to 7 psig
(21 to 48 kPa) for N.O. valves, 9 to 13 psig (62 to 90 kPa) for N.C. valves, and 4 to 8 psig (28 to 55 kPa) for three-way valves.
2. 3 to 7 psig (21 to 48 kPa) for MP82 Actuators.
Table 10: Brass Trim – Maximum Fluid Temperature for Pneumatically Actuated Valves
Actuator Style Water Saturated Steam
V-3801-8001 248°F (120°C) 15 psig (103 kPa)
V-3000-8012 284°F (140°C) 38 psig (262 kPa)
V-3000-8003 248°F (120°C) 15 psig (103 kPa)
MP82 284°F (140°C) 38 psig (262 kPa)
VG7000 Series Bronze Control Valves Product Bulletin
11
Table 11: Stainless Steel Trim – Maximum Closeoff Pressure, psig (kPa) for Pneumatically Actuated Valves
Actuator Valve Maximum Two-Way Normally Open or Two-Way Normally Closed or
Style Size, in. Cv (Kv) Three-Way N.O. Port Three-Way N.C. Port
(DN) Factor (with 20 psig Supply) (with 0 psig Supply)
SS Trim Spring Range (psig)1 Spring Range (psig)1
3 to 62 4 to 8 9 to 13 3 to 62 4 to 8 9 to 13
(21 to 41) (28 to 55) (62 to 90) (21 to 41) (28 to 55) (62 to 90)
V-3000-8012 1/2 0.73 299 255 143 75 106 261
and (DN15) (0.63) (2,060) (1,757) (985) (517) (730) (1,798)
V-3000-8003
1.8 299 255 143 75 106 261
(338°F
(1.6) (2,060) (1,757) (985) (517) (730) (1,798)
[170°C])3
4.6 169 144 81 36 51 126
(4.0) (1,164) (992) (558) (248) (351) (868)
3/4 7.3 108 92 52 22 31 75
(DN20) (6.3) (744) (634) (358) (152) (214) (517)
1 11.6 67 57 32 13 19 49
(DN25) (10) (462) (393) (220) (90) (131) (338)
1-1/4 18.5 41 35 19 7 11 28
(DN32) (16) (282) (241) (131) (48) (76) (193)
MP82 1/2 0.73 308 308 308 280 308 308
(338°F (DN15) (0.63) (2,124) (2,124) (2,124) (1,929) (2,124) (2,124)
[170°C])3 1.8 308 308 308 280 308 308
(1.6) (2,124) (2,124) (2,124) (1,929) (2,124) (2,124)
4.6 308 308 275 135 183 308
(4.0) (2,124) (2,124) (1,895) (930) (1,261) (2,124)
3/4 7.3 308 304 175 81 109 252
(DN20) (6.3) (2,124) (2,095) (1,206) (558) (751) (136)
1 11.6 209 193 111 53 72 168
(DN25) (10) (1,440) (1,330) (765) (365) (496) (1,158)
1-1/4 18.5 128 118 68 30 41 96
(DN32) (16) (882) (813) (469) (207) (282) (661)
1-1/2 28.9 82 75 43 19 25 59
(DN40) (25) (565) (517) (296) (131) (172) (407)
2 46.2 52 48 28 12 16 37
(DN50) (40) (358) (331) (193) (83) (110) (255)
MP84 1-1/2 28.9 165 152 88 39 53 121
(338°F (DN40) (25) (1,137) (1,047) (606) (269) (365) (834)
[170°C])3 2 46.2 106 97 56 24 33 76
(DN50) (40) (730) (668) (386) (154) (227) (524)
1. The recommended ranges for use with a V-9502 Positioner are: 3 to 6 psig (21 to 41 kPa) and 3 to 7 psig (21 to 48 kPa) for
N.O. valves, 9 to 13 psig (62 to 90 kPa) for N.C. valves, and 4 to 8 psig (28 to 55 kPa) for three-way valves.
2. 3 to 7 psig (21 to 48 kPa) for MP82 and MP84 Actuators.
3. The maximum closeoff pressure listed is limited to the maximum allowable American National Standards Institute (ANSI)
valve body rating corresponding to the maximum temperature rating (308 psig [2,122 kPa] at 338°F [170°C]) of the valve.
VG7000 Series Bronze Control Valves Product Bulletin
12
Table 12: Brass Trim – Maximum Closeoff Pressures, psig (kPa) for PDTC Two-Way and PDTC Port for
Three-Way Electrically Actuated Valves1
284°F (140°C) Maximum Fluid Temperature2
Valve 1/2 3/4 1 1-1/4 1-1/2 2
Size, (DN15) (DN20) (DN25) (DN32) (DN40) (DN50)
in. (DN)
Maximum 0.73 1.8 4.6 7.3 11.6 18.5 28.9 46.2
Cv (Kv) (0.63) (1.6) (4.0) (6.3) (10.0) (16.0) (25.0) (40.0)
Factor
VA-715x 345 345 216 138 86 52 34 21
(2,377) (2,377) (1,488) (951) (593) (358) (234) (145)
VA-720x --- --- --- --- 179 109 70 45
(1,233) (751) (482) (310)
VA-4233 345 345 208 132 63 38 --- ---
(2,377) (2,377) (1,433) (909) (434) (262)
VA78x0 --- --- --- --- 182 111 71 46
(1,254) (765) (489) (317)
VA-8x2x 112 80 45 29 --- --- --- ---
(772) (551) (310) (200)
1. The maximum closeoff pressure listed is limited to the maximum allowable ANSI valve body rating corresponding to the
maximum temperature rating (345 psig [2,377 kPa] at 281°F [138°C]) of the valve, except for VA-8x2x Actuators that are
limited to 195°F (91°C) maximum temperature and 381 psig (2,625 kPa) pressure rating.
The maximum closeoff pressures listed are for actuators coupled to the appropriate mounting kits listed in Table 7 and
Table 8. See Table 16 and Table 17 for valid factory-mounted combinations, and Table 7 and Table 8 for available field
mounting kits.
2. The maximum fluid temperature is 284°F (140°C) water to 38 psig (262 kPa) saturated steam except for the following:
VA-4233 Actuators are limited to 35 to 250°F (2 to 121°C) water to 15 psig (103 kPa) saturated steam.
VA-8x2x Actuators are limited to 195°F (91°C) water, and are not rated for steam applications.
Table 13: Brass Trim – Maximum Closeoff Pressures, psig (kPa) for PDTO Two-Way and PDTO Port for
Three-Way Electrically Actuated Valves1,2
Not Available Factory Coupled for PDTO Two-Way — Field Mounting Only
284°F (140°C) Maximum Fluid Temperature3
Valve 1/2 3/4 1 1-1/4 1-1/2 2
Size, (DN15) (DN20) (DN25) (DN32) (DN40) (DN50)
in. (DN)
Maximum 0.73 1.8 4.6 7.3 11.6 18.5 28.9 46.2
Cv (Kv) (0.63) (1.6) (4.0) (6.3) (10.0) (16.0) (25.0) (40.0)
FПоказано початок документа. Повний текст — у PDF за посиланням вище.
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.