| Вид документа | Каталожна сторінка |
|---|---|
| Виробник | JCI |
| Код документа | installation-tools-catalog-page |
| Група обладнання | Installation Tools |
| Сторінок | 2 |
| Мова документа | англійська |
| Розмір файлу | 0.1 МБ |
Текст документа
Code No. LIT-1929095
Issued January 15, 2008
Installation Tools
Selection Chart
Installation Tools (Part 1 of 2)
Figure Code Number Description and Use
JC 5215 Tool Kit
Some tools in the Kit are also listed separately in this Thermostat Adjust and Repair
table.
Kit includes: The kit consists of the following tools:
* JC 5222 Allen Wrench Set
Sizes: 5/64, 7/64, 9/64, 3/32, 1/8, 5/32, 1/16,
3/16, 7/32 and 1/4 in.
* JC 5357 Screwdriver – (cabinet tip) 2 in.
* JC 474 Screwdriver – (cabinet tip) 4 in.
* JC 5309 Flexible Allen Head Screwdriver
* JC 629 Nut Driver – 1/4 in.
JC 5358 Tool Kit Box
JC 5310 Control Line Test Gauge and Adaptor, complete
JC 5307 Wrench, Control Port
T-4002-5012 Thermostat Adjusting Knob, T-4000 Series
T-4002-5009 Thermostat Calibration Tool, T-4000 Series
JC 5301 Spring Hook
Instruction Manual
JC 5386 Multi-Range Gauge, 2-1/2 in.
JC 5361 Needle Probe
* These items described below,
in this table.
Drill Bits
Short Flute
For Light Gauge Metals
Stub Length
JC 160A 7/64 in.
JC 5245 1/8 in.
JC 5246 #30
JC 176A 5/32 in.
JC 188A 3/16 in.
JC 204A 1/4 in.
Drill Bits
High Speed, Steel
Fractional Sizes for General Purpose
Standard Length (dia)
JC 140 1/16 in.
JC 166 1/8 in.
JC 176 5/32 in.
JC 188 3/16 in.
JC 200 7/32 in.
JC 204 1/4 in.
JC 233 5/16 in.*
JC 235 3/8 in.*
JC 238 7/16 in.*
JC 239 1/2 in.*
* Has 1/4 in. Shank
Wire Gauge Sizes for
Tap Drill Screw Size
JC 159 #36 #6-32
JC 168 #29 #8-32
JC 173 #25 #10-24
Drill Bits
Rotary Masonry
(To be Used with Electric Drill)
Standard Length
JC 5218 3/16 in.
JC 5224 1/4 in.
JC 5219 5/16 in.
JC 5225 3/8 in.
JC 5220 1/2 in.
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc. www.johnsoncontrols.com
Installation Tools (Continued)
Installation Tools (Part 2 of 2)
Figure Code Number Description and Use
Drill Bits
Percussion
Rotary Masonry
(To be Used with Hammer Drills)
Drill Overall Shank
Size (in.) Length (in.) Size (in.)
JC 773 3/16 3 3/16
JC 774 1/4 4 1/4
JC 774A 1/4 12 1/4
JC 774B 1/4 18 1/4
JC 775 1/2 12 3/8
Hole Saws
Diameter (in.)
JC 855 5/8 Fine Tooth for Sheet Metal
JC 857 7/8
JC 858K 2-1/8 Course
JC 858N 2-5/8 Tooth
JC 858U 3-3/4
Standard Mandrel with 1/4 in. Shank for
JC 854B 5/8 in. and 1-1/8 in. Hole Saws.
Quick Change Mandrel with 7/16 in. hex shank for
JC 854D 1-1/4 through 4-1/2 in. Hole Saws.
JC 859B 1/4 in. Pilot Drill (Fits Both Mandrels)
Allen Wrench Set
Sizes (in.):
JC 5222 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, and 1/4 in.
Screwdriver
Cabinet Tip for Calibration
Shank: Length 2 in., dia 1/8 in.,
JC 5357 Overall 4-3/4 in.
Screwdriver
Cabinet Tip
Shank: Length 4 in., dia 3/16 in.,
JC 474 Overall 4-3/4 in.
Screwdriver
Flexible, Allen Head
JC 5309 Tip Size 1/16 in., Overall 5-3/4 in.
Nut Driver
JC 629 (1/4 in.)
The performance specifications are nominal and conform to acceptable industry standards. For applications at conditions beyond these specifications, consult the local Johnson Controls office.
Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products. © 2011 Johnson Controls, Inc. www.johnsoncontrols.comПозиції каталогу з цим документом
Документ виробника, опублікований як довідковий матеріал на обладнання, яке ми постачаємо. Правовласник може попросити прибрати його — приберемо.